sparc32: smp fixes
cover sparc32: smp fixes
Here's a set of patches to get sparc32 caught back up to the moving SMP target:
1 - add topology_init
2 - setup cpu_possible_map
3 - add missing rw can_lock macros
4 - mark smp init functions as cpuinit
I have tested these successfully with 2.6.17-rc5. With 2x SuperSPARC-II, I can rebuild the kernel with "make -j6" while running the SMP kernel. I've verified that UP still builds and runs. No luck yet with dual hyperSPARC's, but it will fully boot when restricted to just one.
Bob
From: Bob Breuer <[email protected]>
Date: Sun, 11 Jun 2006 01:15:00 -0500
Quoted 7 lines
Here's a set of patches to get sparc32 caught back up to the moving SMP target:
1 - addtopology_init
2 - setupcpu_possible_map
3 - add missing rwcan_lockmacros
4 - mark smp init functions as cpuinit
Quoted 5 lines
I have tested these successfully with 2.6.17-rc5. With 2x SuperSPARC-II, I can rebuild the kernel with "make -j6" while running the SMP kernel. I've verified that UP still builds and runs. No luck yet with dual hyperSPARC's, but it will fully boot when restricted to just one.
Thanks Bob, I'll try to integrate these over the weekend.
Hi,
Quoted 8 lines · Bob Breuer
Here's a set of patches to get sparc32 caught back up to the moving SMP target:
1 - addtopology_init
2 - setupcpu_possible_map
3 - add missing rwcan_lockmacros
4 - mark smp init functions as cpuinitI have tested these successfully with 2.6.17-rc5.
Your patches apply correctly to rc6 as well.
However, when trying to compile natively rc6 with your patches, with either GCC 4.1.1 or 4.0.4 (from Debian unstable), I get an ICE:
CC kernel/sched.o
kernel/sched.c: In function 'effective_prio':
kernel/sched.c:659: internal compiler error: in choose_multiplier, at expmed.c:3269
What compiler and what platform do you use to compile the kernel? Has anyone experienced similar problems?
Thanks,
Ludovic.
Quoted 9 lines · Ludovic Courtès
However, when trying to compile natively rc6 with your patches, with either GCC 4.1.1 or 4.0.4 (from Debian unstable), I get an ICE:
CC
kernel/sched.o
kernel/sched.c: In function 'effective_prio':
kernel/sched.c:659: internal compiler error: inchoose_multiplier, at expmed.c:3269What compiler and what platform do you use to compile the kernel? Has anyone experienced similar problems?
That's strange, I didn't touch kernel/sched.c, but I did modify a couple of sparc specific header files. Can you narrow down which patch broke it for you?
I compiled it both with gcc 3.3.4 and 3.4.2 from Aurora, specifically:
gcc version 3.3.4 20040623 (Red Hat 3.3.4-2)
gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
Bob
Hi,
2 days, 18 hours, 3 minutes, 4 seconds ago,
Quoted 11 lines · Bob Breuer
Quoted 9 lines · Ludovic Courtès
However, when trying to compile natively rc6 with your patches, with either GCC 4.1.1 or 4.0.4 (from Debian unstable), I get an ICE:
CC
kernel/sched.o
kernel/sched.c: In function 'effective_prio':
kernel/sched.c:659: internal compiler error: inchoose_multiplier, at expmed.c:3269What compiler and what platform do you use to compile the kernel? Has anyone experienced similar problems?
Quoted 7 lines
That's strange, I didn't touch
kernel/sched.c, but I did modify a couple of sparc specific header files. Can you narrow down which patch broke it for you?I compiled it both with gcc 3.3.4 and 3.4.2 from Aurora, specifically:
gcc version 3.3.4 20040623 (Red Hat 3.3.4-2)
gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)
Using GCC 3.4.6 (from Debian sid) fixes the problem.
However, the resulting kernel hangs right after the "Booting Linux..." message. Unfortunately, I might have a few objects compiled with 4.x in the middle of those compiled with 3.4.6. Is this likely to cause troubles?
In the meantime, could you make SMP images available? Then I could spend my CPU time compiling natively, which would be more useful.
Thanks,
Ludovic.
From: Ludovic Courtès <[email protected]>
Date: Wed, 14 Jun 2006 19:35:26 +0200
Quoted 4 lines
However, the resulting kernel hangs right after the "Booting Linux..." message. Unfortunately, I might have a few objects compiled with 4.x in the middle of those compiled with 3.4.6. Is this likely to cause troubles?
Absolutely. Changing the compiler changes many defines use in
the build, via include/linux/compiler.h, and this can even change data structure layout.
Hi,
5 days, 2 hours, 52 minutes, 18 seconds ago,
Quoted 1 line · Ludovic Courtès
Using GCC 3.4.6 (from Debian sid) fixes the problem.
Actually it doesn't. For some reason, I now hit the following ICE with 3.4.6 (Debian's `gcc-3.4', version 3.4.6-2) systematically:
CC fs/proc/proc_misc.o
CC fs/dnotify.o
distcc[13671] ERROR: compile /home/ludo/.ccache/proc_misc.tmp.cheetah.13656.i on localhost failed fs/proc/proc_misc.c: In function `uptime_read_proc':
fs/proc/proc_misc.c:109: internal compiler error: in choose_multiplier, at expmed.c:2738 Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.
For Debian GNU/Linux specific bug reporting instructions,
see <URL:file:///usr/share/doc/gcc-3.4/README.Bugs>.
I finally used 3.3.6 to built the whole kernel and I don't hit any ICE there. Is anybody building SPARC kernels with 3.4 or 4.x?
Quoted 2 lines
However, the resulting kernel hangs right after the "Booting Linux..." message.
The kernel (once cleanly recompiled with 3.3.6) still hangs at the same point, whether there are one or two CPUs in the machine.
I guess I should try to selectively revert some of the SMP patches in order to try to find out what's causing this. Any advice about how to proceed?
Thanks,
Ludovic.
Quoted 4 lines · Ludovic Courtès
Hi,
5 days, 2 hours, 52 minutes, 18 seconds ago,
Ludovic Courtès wrote:
Quoted 8 lines
Quoted 1 line
Using GCC 3.4.6 (from Debian sid) fixes the problem.
Actually it doesn't. For some reason, I now hit the following ICE with 3.4.6 (Debian's `gcc-3.4', version 3.4.6-2) systematically:
CC
fs/proc/proc_misc.o
CCfs/dnotify.o
distcc[13671] ERROR: compile
^^^^^^
Jumping through extra hoops here? Or in other words, is there any chance that distcc may cause problems?
Quoted 8 lines
I finally used 3.3.6 to built the whole kernel and I don't hit any ICE there. Is anybody building SPARC kernels with 3.4 or 4.x?
Quoted 2 lines
However, the resulting kernel hangs right after the "Booting Linux..." message.
The kernel (once cleanly recompiled with 3.3.6) still hangs at the same point, whether there are one or two CPUs in the machine.
I've put my SMP kernel image up at: http://user.mc.net/~breuerr/sparc/
if you want to give it a try. No initrd needed, and it's a pretty trimmed down config, but it works for me. The config and patch to recreate it are also there.
Bob