Skip to contentSkip to conversation

intelfb: RESEND - add preliminary i2c support

PATCH In review Dennis Munsie 1 participant 1 message Jun 20, 2006 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 7/8 intelfb: RESEND - add preliminary i2c support

From: Dennis Munsie <[email protected]>

[07/07] intelfb: adds an option to enable I2C support in the intelfb driver. Also adds the intel_i2c.c file to the Makefile.

---

 drivers/video/Kconfig          |   20 ++++++++++++++++++--
 drivers/video/intelfb/Makefile |    4 +++-
 2 files changed, 21 insertions(+), 3 deletions(-)
drivers/video/Kconfig +18 -2
diff -Naurp -X linux-2.6.17-rc6-patched/Documentation/dontdiff linux-2.6.17-rc6-patched/drivers/video/Kconfig linux/drivers/video/Kconfig
@@ -746,6 +746,8 @@ config FB_INTEL
 	depends on FB && EXPERIMENTAL && PCI && X86
 	select AGP
 	select AGP_INTEL
+	select I2C_ALGOBIT if FB_INTEL_I2C
+	select I2C if FB_INTEL_I2C
 	select FB_MODE_HELPERS
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
@@ -755,17 +757,31 @@ config FB_INTEL
           830M/845G/852GM/855GM/865G chipsets.
           Say Y if you have and plan to use such a board.
 
-          To compile this driver as a module, choose M here: the
+	  If you say Y here and want DDC/I2C support you must first say Y to
+	  "I2C support" and "I2C bit-banging support" in the character devices
+	  section.
+
+	  If you say M here then "I2C support" and "I2C bit-banging support"
+	  can be build either as modules or built-in.
+
+	  To compile this driver as a module, choose M here: the
 	  module will be called intelfb.
 
 config FB_INTEL_DEBUG
-        bool "Intel driver Debug Messages"
+	bool "Intel driver Debug Messages"
 	depends on FB_INTEL
 	---help---
 	  Say Y here if you want the Intel driver to output all sorts
 	  of debugging informations to provide to the maintainer when
 	  something goes wrong.
 
+config FB_INTEL_I2C
+	bool "DDC/I2C for Intel framebuffer support"
+	depends on FB_INTEL
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
 config FB_MATROX
 	tristate "Matrox acceleration"
 	depends on FB && PCI
drivers/video/intelfb/Makefile +3 -1
diff -Naurp -X linux-2.6.17-rc6-patched/Documentation/dontdiff linux-2.6.17-rc6-patched/drivers/video/intelfb/Makefile linux/drivers/video/intelfb/Makefile
@@ -1,6 +1,8 @@
 obj-$(CONFIG_FB_INTEL) += intelfb.o
 
-intelfb-objs := intelfbdrv.o intelfbhw.o
+intelfb-y := intelfbdrv.o intelfbhw.o
+intelfb-$(CONFIG_FB_INTEL_I2C) += intelfb_i2c.o
+intelfb-objs := $(intelfb-y)
 
 ifdef CONFIG_FB_INTEL_DEBUG
 #EXTRA_CFLAGS += -DDEBUG -DVERBOSE -DREGDUMP