list corruption on removal of snd_seq_dummy
If you apply the debugging patch below (based on one from -mm) and rmmod snd_seq_dummy, you get this spew:
(based on a 2.6.17rc6 kernel, but likely still there in todays -git)
The code in question is doing..
__list_add(&deleted_list,
client->ports_list_head.prev,
client->ports_list_head.next);which looks fishy, as those two elements aren't going to be consecutive, as __list_add expects.
Dave
List corruption. next->prev should be f76896e8, but was f70acbcc
------------[ cut here ]------------ kernel BUG at include/linux/list.h:58! invalid opcode: 0000 [#1] SMP last sysfs file: /devices/pci0000:00/0000:00:1f.3/i2c-0/0-002e/pwm3 Modules linked in: lm85 hwmon_vid hwmon i2c_isa ipv6 nls_utf8 loop snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss matroxfb_base matroxfb_DAC1064 snd_mixer_oss matroxfb_accel matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc snd_pcm 3w_9xxx e1000 snd_timer snd i2c_i801 soundcore i2c_core snd_page_alloc ext3 jbd 3w_xxxx ata_piix libata sd_mod scsi_mod CPU: 1 EIP: 0060:[<f8a1a56d>] Not tainted VLI EFLAGS: 00010092 (2.6.16-1.2232_FC6 #1)
EIP is at snd_seq_delete_all_ports+0x57/0x167 [snd_seq]
eax: 00000044 ebx: f76896e8 ecx: c06c77d0 edx: 00000096
esi: f76896e8 edi: f70acbcc ebp: f70acb50 esp: f772cf08
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 6274, threadinfo=f772c000 task=df26f550)
Stack: f8a1b83b f76896e8 f70acbcc f70acbe4 f70acbd4 00000282 22222222 22222222
f70acb50 00000020 00000000 f772c000 f8a1521e f70acb50 f8a152e2 c043df66
f772c000 c0445bf0 f70acb50 f8a1778b f89b4e00 c043e177 5f646e73 5f716573
Call Trace:
<f8a1521e> seq_free_client1+0x8/0x90 [snd_seq] <f8a152e2> seq_free_client+0x3c/0x78 [snd_seq]
<c043df66> __try_stop_module+0x0/0x44 <c0445bf0> stop_machine_run+0x2e/0x34
<f8a1778b> snd_seq_delete_kernel_client+0x1a/0x2c [snd_seq] <c043e177> sys_delete_module+0x192/0x1bb
<c060f020> do_page_fault+0x235/0x5ba <c045ab3f> do_munmap+0x196/0x1af
<c0403e1f> syscall_call+0x7/0xb
Code: 24 14 39 7d 7c 74 67 8b 5d 7c 8b b5 80 00 00 00 8b 43 04 39 f0 74 1c 89 74 24 04 89 44 24 08 c7 04 24 3b b8 a1 f8 e8 e7 ab a0 c7 <0f> 0b 3a 00 26 b8 a1 f8 8b 06 39 d8 74 1c 89 5c 24 04 89 44 24
EIP: [<f8a1a56d>] snd_seq_delete_all_ports+0x57/0x167 [snd_seq] SS:ESP 0068:f772cf08
<3>BUG: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():0, irqs_disabled():1
<c042ffa2> blocking_notifier_call_chain+0x18/0x4b <c0427387> do_exit+0x19/0x7a5 <c053a76b> do_unblank_screen+0x2a/0x127 <c040549a> die+0x2a5/0x2ca
<c0405b30> do_invalid_op+0x0/0xab <c0405bd2> do_invalid_op+0xa2/0xab
<f8a1a56d> snd_seq_delete_all_ports+0x57/0x167 [snd_seq] <c041e25f> find_busiest_group+0xfc/0x29c <c060dfd0> _spin_unlock_irq+0x5/0x7 <c04390ef> debug_mutex_add_waiter+0x97/0xa9 <f8a1a531> snd_seq_delete_all_ports+0x1b/0x167 [snd_seq] <c04049b7> error_code+0x4f/0x54 <f8a1a56d> snd_seq_delete_all_ports+0x57/0x167 [snd_seq] <f8a1521e> seq_free_client1+0x8/0x90 [snd_seq] <f8a152e2> seq_free_client+0x3c/0x78 [snd_seq] <c043df66> __try_stop_module+0x0/0x44 <c0445bf0> stop_machine_run+0x2e/0x34 <f8a1778b> snd_seq_delete_kernel_client+0x1a/0x2c [snd_seq] <c043e177> sys_delete_module+0x192/0x1bb <c060f020> do_page_fault+0x235/0x5ba <c045ab3f> do_munmap+0x196/0x1af <c0403e1f> syscall_call+0x7/0xb
BUG: rmmod/6274, lock held at task exit time!
[f8a21fa0] {register_mutex}.. held by: rmmod: 6274 [df26f550, 117]
... acquired at: seq_free_client+0x10/0x78 [snd_seq]
include/linux/list.h renamed from include/linux/list.h~ +22 -0
@@ -5,7 +5,9 @@#include <linux/stddef.h> #include <linux/prefetch.h> +#include <linux/kernel.h> #include <asm/system.h> +#include <asm/bug.h> /* * These are non-NULL pointers that will result in page faults
@@ -52,6 +52,16 @@ static inline void __list_add(struct lis struct list_head *prev, struct list_head *next) { +if (next->prev != prev) { +printk ("List corruption. next->prev should be %p, but was %p\n" , + prev, next->prev); +BUG (); + } +if (prev->next != next) { +printk ("List corruption. prev->next should be %p, but was %p\n" , + next, prev->next); +BUG (); + } next->prev = new; new->next = next; new->prev = prev;
@@ -162,6 +162,16 @@ static inline void __list_del(struct lis*/ static inline void list_del (struct list_head *entry) { +if (entry->prev->next != entry) { +printk ("List corruption. prev->next should be %p, but was %p\n" , + entry, entry->prev->next); +BUG (); + } +if (entry->next->prev != entry) { +printk ("List corruption. next->prev should be %p, but was %p\n" , + entry, entry->next->prev); +BUG (); + }__list_del (entry->prev, entry->next); entry->next =LIST_POISON1 ; entry->prev =LIST_POISON2 ;
Signature · 1 line
http://www.codemonkey.org.uk
At Thu, 22 Jun 2006 23:15:26 -0400,
Quoted 5 lines · Dave Jones
If you apply the debugging patch below (based on one from -mm) and rmmod
snd_seq_dummy, you get this spew:
(based on a 2.6.17rc6 kernel, but likely still there in todays -git)
Quoted 8 lines
The code in question is doing..
__list_add(&deleted_list, client->ports_list_head.prev, client->ports_list_head.next);which looks fishy, as those two elements aren't going to be consecutive, as
__list_addexpects.
I think the code behaves correctly but probably misusing __list_add(). It movies the whole entries from an existing list_head A (clients->ports_list_head) to a new list_head B (deleted_list). The above is exapnded:
A->next->prev = B; B->next = A->next; B->prev = A->prev; A->prev->next = B;
Any better way to achieve it using standard macros?
thanks,
Takashi
Quoted 105 lines
Dave
List corruption.
next->prevshould bef76896e8, but wasf70acbcc------------[ cut here ]------------ kernel BUG at include/linux/list.h:58! invalid opcode: 0000 [#1] SMP last sysfs file: /devices/pci0000:00/0000:00:1f.3/i2c-0/0-002e/pwm3 Modules linked in: lm85 hwmon_vid hwmon i2c_isa ipv6 nls_utf8 loop snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss matroxfb_base matroxfb_DAC1064 snd_mixer_oss matroxfb_accel matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc snd_pcm 3w_9xxx e1000 snd_timer snd i2c_i801 soundcore i2c_core snd_page_alloc ext3 jbd 3w_xxxx ata_piix libata sd_mod scsi_mod CPU: 1 EIP: 0060:[<f8a1a56d>] Not tainted VLI EFLAGS: 00010092 (2.6.16-1.2232_FC6 #1)EIP is at
snd_seq_delete_all_ports+0x57/0x167[snd_seq]
eax: 00000044 ebx:f76896e8ecx:c06c77d0edx: 00000096
esi:f76896e8edi:f70acbccebp:f70acb50esp:f772cf08
ds: 007b es: 007b ss: 0068
Process rmmod (pid: 6274, threadinfo=f772c000 task=df26f550)Stack: f8a1b83b f76896e8 f70acbcc f70acbe4 f70acbd4 00000282 22222222 22222222 f70acb50 00000020 00000000 f772c000 f8a1521e f70acb50 f8a152e2 c043df66 f772c000 c0445bf0 f70acb50 f8a1778b f89b4e00 c043e177 5f646e73 5f716573 Call Trace: <f8a1521e> seq_free_client1+0x8/0x90 [snd_seq] <f8a152e2> seq_free_client+0x3c/0x78 [snd_seq] <c043df66> __try_stop_module+0x0/0x44 <c0445bf0> stop_machine_run+0x2e/0x34 <f8a1778b> snd_seq_delete_kernel_client+0x1a/0x2c [snd_seq] <c043e177> sys_delete_module+0x192/0x1bb <c060f020> do_page_fault+0x235/0x5ba <c045ab3f> do_munmap+0x196/0x1af <c0403e1f> syscall_call+0x7/0xb Code: 24 14 39 7d 7c 74 67 8b 5d 7c 8b b5 80 00 00 00 8b 43 04 39 f0 74 1c 89 74 24 04 89 44 24 08 c7 04 24 3b b8 a1 f8 e8 e7 ab a0 c7 <0f> 0b 3a 00 26 b8 a1 f8 8b 06 39 d8 74 1c 89 5c 24 04 89 44 24 EIP: [<f8a1a56d>] snd_seq_delete_all_ports+0x57/0x167 [snd_seq] SS:ESP 0068:f772cf08 <3>BUG: sleeping function called from invalid context at include/linux/rwsem.h:43in_atomic():0, irqs_disabled():1
<c042ffa2>blocking_notifier_call_chain+0x18/0x4b<c0427387>do_exit+0x19/0x7a5<c053a76b>do_unblank_screen+0x2a/0x127<c040549a>die+0x2a5/0x2ca
<c0405b30>do_invalid_op+0x0/0xab<c0405bd2>do_invalid_op+0xa2/0xab
<f8a1a56d>snd_seq_delete_all_ports+0x57/0x167[snd_seq] <c041e25f>find_busiest_group+0xfc/0x29c<c060dfd0>_spin_unlock_irq+0x5/0x7<c04390ef>debug_mutex_add_waiter+0x97/0xa9<f8a1a531>snd_seq_delete_all_ports+0x1b/0x167[snd_seq] <c04049b7>error_code+0x4f/0x54<f8a1a56d>snd_seq_delete_all_ports+0x57/0x167[snd_seq] <f8a1521e>seq_free_client1+0x8/0x90[snd_seq] <f8a152e2>seq_free_client+0x3c/0x78[snd_seq] <c043df66>__try_stop_module+0x0/0x44<c0445bf0>stop_machine_run+0x2e/0x34<f8a1778b>snd_seq_delete_kernel_client+0x1a/0x2c[snd_seq] <c043e177>sys_delete_module+0x192/0x1bb<c060f020>do_page_fault+0x235/0x5ba<c045ab3f>do_munmap+0x196/0x1af<c0403e1f>syscall_call+0x7/0xbBUG: rmmod/6274, lock held at task exit time! [f8a21fa0] {register_mutex}.. held by: rmmod: 6274 [
df26f550, 117]
... acquired at:seq_free_client+0x10/0x78[snd_seq]include/linux/list.h renamed from include/linux/list.h~ +22
-0@@ -5,7 +5,9 @@#include <linux/stddef.h> #include <linux/prefetch.h> +#include <linux/kernel.h> #include <asm/system.h> +#include <asm/bug.h> /* * These are non-NULL pointers that will result in page faults @@ -52,6 +52,16 @@ static inline void __list_add(struct lis struct list_head *prev, struct list_head *next) { +if (next->prev != prev) { +printk ("List corruption. next->prev should be %p, but was %p\n" , + prev, next->prev); +BUG (); + } +if (prev->next != next) { +printk ("List corruption. prev->next should be %p, but was %p\n" , + next, prev->next); +BUG (); + } next->prev = new; new->next = next; new->prev = prev;@@ -162,6 +162,16 @@ static inline void __list_del(struct lis*/ static inline void list_del (struct list_head *entry) { +if (entry->prev->next != entry) { +printk ("List corruption. prev->next should be %p, but was %p\n" , + entry, entry->prev->next); +BUG (); + } +if (entry->next->prev != entry) { +printk ("List corruption. next->prev should be %p, but was %p\n" , + entry, entry->next->prev); +BUG (); + }__list_del (entry->prev, entry->next); entry->next =LIST_POISON1 ; entry->prev =LIST_POISON2 ;Signature · 7 lines
-- http://www.codemonkey.org.uk - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Quoted 14 lines · Takashi Iwai
Quoted 8 lines
The code in question is doing..
__list_add(&deleted_list, client->ports_list_head.prev, client->ports_list_head.next);which looks fishy, as those two elements aren't going to be consecutive, as
__list_addexpects.I think the code behaves correctly but probably misusing
__list_add(). It movies the whole entries from an existinglist_headA (clients->ports_list_head) to a newlist_headB (deleted_list). The above is exapnded:
Quoted 6 lines
A->next->prev = B; B->next = A->next; B->prev = A->prev; A->prev->next = B;Any better way to achieve it using standard macros?
Why can't you just list_move() the elements ?
Dave
Signature · 6 lines
http://www.codemonkey.org.uk Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
At Mon, 26 Jun 2006 23:27:38 -0400,
Quoted 17 lines · Dave Jones
Quoted 14 lines · Takashi Iwai
Quoted 8 lines
The code in question is doing..
__list_add(&deleted_list, client->ports_list_head.prev, client->ports_list_head.next);which looks fishy, as those two elements aren't going to be consecutive, as
__list_addexpects.I think the code behaves correctly but probably misusing
__list_add(). It movies the whole entries from an existinglist_headA (clients->ports_list_head) to a newlist_headB (deleted_list). The above is exapnded:
Quoted 8 lines
Quoted 6 lines
A->next->prev = B; B->next = A->next; B->prev = A->prev; A->prev->next = B;Any better way to achieve it using standard macros?
Why can't you just
list_move()the elements ?
No, list_move() can't move the whole elements without loop.
A solution is
list_add(B, A); list_del_init(A);
(although this introduces a bit more code :)
Takashi
Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642