Skip to contentSkip to conversation

apic: fix apic error on bootup

PATCH In review Siddha, Suresh B 2 participants 2 messages Jun 23, 2006

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 apic: fix apic error on bootup

Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup.

Quoted 1 line

From SDM Vol-3A "Valid Interrupt Vectors" section:

"When an illegal vector value (0-15) is written to an LVT entry and the delivery mode is Fixed, the APIC may signal an illegal vector error, with out regard to whether the mask bit is set or whether an interrupt is actually seen on input."

arch/x86_64/kernel/apic.c renamed from arch/x86_64/kernel/apic.c~ +13 -2
@@ -100,7 +100,7 @@ void clear_local_APIC(void)
 	maxlvt = get_maxlvt();
 
 	/*
-	 * Masking an LVT entry on a P6 can trigger a local APIC error
+	 * Masking an LVT entry can trigger a local APIC error
 	 * if the vector is zero. Mask LVTERR first to prevent this.
 	 */
 	if (maxlvt >= 3) {
@@ -850,7 +850,18 @@ void disable_APIC_timer(void)
 		unsigned long v;
 
 		v = apic_read(APIC_LVTT);
-		apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
+		/*
+		 * When an illegal vector value (0-15) is written to an LVT
+		 * entry and delivery mode is Fixed, the APIC may signal an
+		 * illegal vector error, with out regard to whether the mask
+		 * bit is set or whether an interrupt is actually seen on input.
+		 *
+		 * Boot sequence might call this function when the LVTT has
+		 * '0' vector value. So make sure vector field is set to
+		 * valid value.
+		 */
+		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write(APIC_LVTT, v);
 	}
 }
 
arch/i386/kernel/apic.c renamed from arch/i386/kernel/apic.c~ +13 -2
@@ -157,7 +157,7 @@ void clear_local_APIC(void)
 	maxlvt = get_maxlvt();
 
 	/*
-	 * Masking an LVT entry on a P6 can trigger a local APIC error
+	 * Masking an LVT entry can trigger a local APIC error
 	 * if the vector is zero. Mask LVTERR first to prevent this.
 	 */
 	if (maxlvt >= 3) {
@@ -1117,7 +1117,18 @@ void disable_APIC_timer(void)
 		unsigned long v;
 
 		v = apic_read(APIC_LVTT);
-		apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+		/*
+		 * When an illegal vector value (0-15) is written to an LVT
+		 * entry and delivery mode is Fixed, the APIC may signal an
+		 * illegal vector error, with out regard to whether the mask
+		 * bit is set or whether an interrupt is actually seen on input.
+		 *
+		 * Boot sequence might call this function when the LVTT has
+		 * '0' vector value. So make sure vector field is set to
+		 * valid value.
+		 */
+		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+		apic_write_around(APIC_LVTT, v);
 	}
 }
 
#1 lore raw
Quoted 7 lines · Suresh B

Appended patch fixes the "APIC error on CPUX: 00(40)" observed during bootup.

From SDM Vol-3A "Valid Interrupt Vectors" section:
"When an illegal vector value (0-15) is written to an LVT entry and the delivery mode is Fixed, the APIC may signal an illegal vector error, with out regard to whether the mask bit is set or whether an interrupt is actually seen on input."

Merged thanks

-Andi