imacfb: Add Intel-based Macintosh Framebuffer Support
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · Linux Kernel
commit
90b4f9aca4d124d114e02bbb3d1d4f3d1d47138f
treee367b2fd3ad08b706bd7825c6251a95284f3bb76
parent1a8c9795290361cef232fd54f425a57d143108a8
author Edgar Hucek <[email protected]> Mon, 26 Jun 2006 14:26:59 -0700 committer Linus Torvalds <[email protected]> Mon, 26 Jun 2006 23:58:32 -0700
Quoted 6 lines
[PATCH] imacfb: Add Intel-based Macintosh Framebuffer Support
This patch adds a new framebuffer driver for the Intel Based macs. This framebuffer is needed when booting from EFI to get something out the box.
[akpm: note: doesn't support modular building]
This scares me from a distro kernel point of view too, because it does no probing that it's actually running on a mac, (be that through DMI strings or PCI idents). Instead if it hasn't been passed a boot option, it sets model to 'M_NEW'....
Review
Quoted 7 lines
(quoted diff) +7
-0+ case M_NEW: + case M_I20: + screen_info.lfb_width = 1680; + screen_info.lfb_height = 1050; + screen_info.lfb_linelength = 1728 * 4; + screen_info.lfb_base = 0x80010000; + break;
And then assumes it can scribble at 0x80010000.
Whilst in most cases the request_region that follows is going to fail, the possibility exists that something entirely different could be mapped there, guaranteeing fun times should Apple ever do something silly like, mapping the NVRAM there..
Dave
Signature · 1 line
http://www.codemonkey.org.uk
At the moment i work on implementing Machine detection through DMI and make the driver loadable as module. I know that the driver is not perfekt, but a good starting point :)
cu
Edgar (gimli) Hucek
Quoted 36 lines · Dave Jones
Quoted 6 lines · Linux Kernel
commit
90b4f9aca4d124d114e02bbb3d1d4f3d1d47138f
treee367b2fd3ad08b706bd7825c6251a95284f3bb76
parent1a8c9795290361cef232fd54f425a57d143108a8
author Edgar Hucek <[email protected]> Mon, 26 Jun 2006 14:26:59 -0700 committer Linus Torvalds <[email protected]> Mon, 26 Jun 2006 23:58:32 -0700Quoted 6 lines
[PATCH] imacfb: Add Intel-based Macintosh Framebuffer Support
This patch adds a new framebuffer driver for the Intel Based macs. This framebuffer is needed when booting from EFI to get something out the box.
[akpm: note: doesn't support modular building]
This scares me from a distro kernel point of view too, because it does no probing that it's actually running on a mac, (be that through DMI strings or PCI idents). Instead if it hasn't been passed a boot option, it sets model to '
M_NEW'....Review
Quoted 7 lines
(quoted diff) +7
-0+ case M_NEW: + case M_I20: + screen_info.lfb_width = 1680; + screen_info.lfb_height = 1050; + screen_info.lfb_linelength = 1728 * 4; + screen_info.lfb_base = 0x80010000; + break;And then assumes it can scribble at
0x80010000.Whilst in most cases the
request_regionthat follows is going to fail, the possibility exists that something entirely different could be mapped there, guaranteeing fun times should Apple ever do something silly like, mapping the NVRAM there..Dave