Skip to contentSkip to conversation

add framebuffer and display update module support for pnx4008

PATCH New Vitaly Wool 1 participant 1 message Jun 30, 2006 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 add framebuffer and display update module support for pnx4008

Hi folks,

inlined is the updated version of the patch that adds support for Display Update Module and RGB framebuffer device on Philips PNX4008 ARM board. The only update since the previous version is that put_cmd_string now uses ioreadXX common access macros.

 Kconfig            |   15
 Makefile           |    2
 pnx4008/Makefile   |    7
 pnx4008/dum.h      |  211 ++++++++++++
 pnx4008/fbcommon.h |   43 ++
 pnx4008/pnxrgbfb.c |  214 +++++++++++++
 pnx4008/sdum.c     |  872 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 pnx4008/sdum.h     |  139 ++++++++
 8 files changed, 1503 insertions(+)
drivers/video/pnx4008/Makefile new file +7 -0
Index: linux-2.6.git/drivers/video/pnx4008/Makefile
===================================================================
@@ -0,0 +1,7 @@
+#
+# Makefile for the new PNX4008 framebuffer device driver
+#
+
+obj-$(CONFIG_FB_PNX4008_DUM) += sdum.o
+obj-$(CONFIG_FB_PNX4008_DUM_RGB) += pnxrgbfb.o
+
drivers/video/pnx4008/dum.h new file +211 -0

211 lines not on this page · raw message

drivers/video/pnx4008/fbcommon.h new file +43 -0

43 lines not on this page · raw message

drivers/video/Kconfig +15 -0
Index: linux-2.6.git/drivers/video/Kconfig
===================================================================
@@ -1560,6 +1560,21 @@ config FB_S3C2410_DEBUG
 	  Turn on debugging messages. Note that you can set/unset at run time
 	  through sysfs
 
+config FB_PNX4008_DUM
+	tristate "Display Update Module support on Philips PNX4008 board"
+	depends on FB && ARCH_PNX4008
+	---help---
+	  Say Y here to enable support for PNX4008 Display Update Module (DUM)
+
+config FB_PNX4008_DUM_RGB
+	tristate "RGB Framebuffer support on Philips PNX4008 board"
+	depends on FB_PNX4008_DUM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here to enable support for PNX4008 RGB Framebuffer
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB
drivers/video/Makefile +2 -0
Index: linux-2.6.git/drivers/video/Makefile
===================================================================
@@ -94,6 +94,8 @@ obj-$(CONFIG_FB_TX3912)		  += tx3912fb.o
 obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
 obj-$(CONFIG_FB_IMX)              += imxfb.o
 obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
+obj-$(CONFIG_FB_PNX4008_DUM)	  += pnx4008/
+obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_VESA)             += vesafb.o
drivers/video/pnx4008/sdum.c new file +872 -0

872 lines not on this page · raw message

drivers/video/pnx4008/sdum.h new file +139 -0

139 lines not on this page · raw message

drivers/video/pnx4008/pnxrgbfb.c new file +214 -0

214 lines not on this page · raw message

Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642