Skip to contentSkip to conversation

2.6.18-rc1: breaks boot on thinkpad x32

DISCUSSION Pavel Machek 2 participants 5 messages Jul 7, 2006 – Jul 8, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

Hi!

I tried to update to 2.6.18-rc1-git, but got hang after

acpiphp: Slot [1] registered

...but acpi=off failed to workaround the problem, it merely hung at another place. I went back to 2.6.18-rc1, and it hung at same place. 2.6.17 works. Any ideas?
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 9 lines · On Fri, 7 Jul 2006 12:50:41 +0200 Pavel Machek <[email protected]> wrote:

Hi!

I tried to update to 2.6.18-rc1-git, but got hang after

acpiphp: Slot [1] registered

...but acpi=off failed to workaround the problem, it merely hung at another place. I went back to 2.6.18-rc1, and it hung at same place.

There have been no post-2.6.18-rc1 commits yet.

Quoted 1 line

2.6.17 works. Any ideas?

Nope. Is the hang during initial bootup or during modprobing?

If during initial bootup, try adding initcall_debug to the boot command line.

If modular, work out which module is being bad?

It might be the cm_sbs driver. (initcall_debug will point at acpi_cm_sbs_init()). If so, this'll help.

drivers/acpi/cm_sbs.c renamed from drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem +14 -32
diff -puN drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem drivers/acpi/cm_sbs.c
@@ -39,50 +39,43 @@ ACPI_MODULE_NAME("cm_sbs")
 static struct proc_dir_entry *acpi_ac_dir;
 static struct proc_dir_entry *acpi_battery_dir;
 
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
 
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
 
 struct proc_dir_entry *acpi_lock_ac_dir(void)
 {
-
-	down(&cm_sbs_sem);
-	if (!acpi_ac_dir) {
+	mutex_lock(&cm_sbs_mutex);
+	if (!acpi_ac_dir)
 		acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
-	}
 	if (acpi_ac_dir) {
 		lock_ac_dir_cnt++;
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_AC_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_ac_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_ac_dir);
 
 void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_ac_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_ac_dir_param)
 		lock_ac_dir_cnt--;
-	}
 	if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
 		remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
 		acpi_ac_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 }
-
 EXPORT_SYMBOL(acpi_unlock_ac_dir);
 
 struct proc_dir_entry *acpi_lock_battery_dir(void)
 {
-
-	down(&cm_sbs_sem);
+	mutex_lock(&cm_sbs_mutex);
 	if (!acpi_battery_dir) {
 		acpi_battery_dir =
 		    proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
@@ -93,39 +86,28 @@ struct proc_dir_entry *acpi_lock_battery
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_BATTERY_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_battery_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_battery_dir);
 
 void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_battery_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_battery_dir_param)
 		lock_battery_dir_cnt--;
-	}
 	if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
 	    && acpi_battery_dir) {
 		remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
 		acpi_battery_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return;
 }
-
 EXPORT_SYMBOL(acpi_unlock_battery_dir);
 
 static int __init acpi_cm_sbs_init(void)
 {
-
-	if (acpi_disabled)
-		return 0;
-
-	init_MUTEX(&cm_sbs_sem);
-
 	return 0;
 }
-
 subsys_initcall(acpi_cm_sbs_init);

_

#2 lore raw

Re: 2.6.18-rc1: breaks boot on thinkpad x32 -- acpiphp problems?

Hi!

Quoted 8 lines
Quoted 7 lines

I tried to update to 2.6.18-rc1-git, but got hang after

acpiphp: Slot [1] registered

...but acpi=off failed to workaround the problem, it merely hung at another place. I went back to 2.6.18-rc1, and it hung at same place.

Quoted 8 lines

There have been no post-2.6.18-rc1 commits yet.

Quoted 1 line

2.6.17 works. Any ideas?

Nope. Is the hang during initial bootup or during modprobing?

If during initial bootup, try adding initcall_debug to the boot command line.

Initial bootup, I basically do not use modules.

It hangs at the same place... but with with acpi=off, I can see it hanging at acpi_ac_init. What is going on?

Why is acpiphp being initialized with acpi=off?

Will try disabling acpiphp in config and see what happens.

Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#3 lore raw

Re: 2.6.18-rc1: breaks boot on thinkpad x32 -- acpiphp problems?

Hi!

Quoted 17 lines
Quoted 8 lines
Quoted 7 lines

I tried to update to 2.6.18-rc1-git, but got hang after

acpiphp: Slot [1] registered

...but acpi=off failed to workaround the problem, it merely hung at another place. I went back to 2.6.18-rc1, and it hung at same place.

Quoted 8 lines

There have been no post-2.6.18-rc1 commits yet.

Quoted 1 line

2.6.17 works. Any ideas?

Nope. Is the hang during initial bootup or during modprobing?

If during initial bootup, try adding initcall_debug to the boot command line.

Quoted 8 lines

Initial bootup, I basically do not use modules.

It hangs at the same place... but with with acpi=off, I can see it hanging at acpi_ac_init. What is going on?

Why is acpiphp being initialized with acpi=off?

Will try disabling acpiphp in config and see what happens.

With acpiphp disabled, machine indeed boots properly.
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#4 lore raw

Re: 2.6.18-rc1: breaks boot on thinkpad x32 -- acpiphp problems?

In reply to Pavel Machek
Quoted 14 lines · On Sat, 8 Jul 2006 14:06:35 +0200 Pavel Machek <[email protected]> wrote:
Quoted 13 lines
Quoted 7 lines

I tried to update to 2.6.18-rc1-git, but got hang after

acpiphp: Slot [1] registered

...but acpi=off failed to workaround the problem, it merely hung at another place. I went back to 2.6.18-rc1, and it hung at same place.

There have been no post-2.6.18-rc1 commits yet.

Quoted 1 line

2.6.17 works. Any ideas?

Nope. Is the hang during initial bootup or during modprobing?

Quoted 7 lines
Quoted 2 lines

If during initial bootup, try adding initcall_debug to the boot command line.

Initial bootup, I basically do not use modules.

It hangs at the same place... but with with acpi=off, I can see it hanging at acpi_ac_init. What is going on?

The patch I sent should fix it, honest. Here it is again.

From: Andrew Morton <[email protected]>

cm_sbs_sem is being downed (via acpi_ac_init->acpi_lock_ac_dir) before it is initialised, with grave results.

- Make it a mutex

- Initialise it

- Make it static

- Clean other stuff up.

Thanks to Paul Drynoff <[email protected]> for reporting and testing.

Cc "Brown, Len" <[email protected]>
Cc Rich Townsend <[email protected]>

---

 drivers/acpi/cm_sbs.c |   46 ++++++++++++----------------------------
 1 file changed, 14 insertions(+), 32 deletions(-)
drivers/acpi/cm_sbs.c renamed from drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem +14 -32
diff -puN drivers/acpi/cm_sbs.c~acpi-initialise-cm_sbs_sem drivers/acpi/cm_sbs.c
@@ -39,50 +39,43 @@ ACPI_MODULE_NAME("cm_sbs")
 static struct proc_dir_entry *acpi_ac_dir;
 static struct proc_dir_entry *acpi_battery_dir;
 
-static struct semaphore cm_sbs_sem;
+static DEFINE_MUTEX(cm_sbs_mutex);
 
-static int lock_ac_dir_cnt = 0;
-static int lock_battery_dir_cnt = 0;
+static int lock_ac_dir_cnt;
+static int lock_battery_dir_cnt;
 
 struct proc_dir_entry *acpi_lock_ac_dir(void)
 {
-
-	down(&cm_sbs_sem);
-	if (!acpi_ac_dir) {
+	mutex_lock(&cm_sbs_mutex);
+	if (!acpi_ac_dir)
 		acpi_ac_dir = proc_mkdir(ACPI_AC_CLASS, acpi_root_dir);
-	}
 	if (acpi_ac_dir) {
 		lock_ac_dir_cnt++;
 	} else {
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_AC_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_ac_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_ac_dir);
 
 void acpi_unlock_ac_dir(struct proc_dir_entry *acpi_ac_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_ac_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_ac_dir_param)
 		lock_ac_dir_cnt--;
-	}
 	if (lock_ac_dir_cnt == 0 && acpi_ac_dir_param && acpi_ac_dir) {
 		remove_proc_entry(ACPI_AC_CLASS, acpi_root_dir);
 		acpi_ac_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 }
-
 EXPORT_SYMBOL(acpi_unlock_ac_dir);
 
 struct proc_dir_entry *acpi_lock_battery_dir(void)
 {
-
-	down(&cm_sbs_sem);
+	mutex_lock(&cm_sbs_mutex);
 	if (!acpi_battery_dir) {
 		acpi_battery_dir =
 		    proc_mkdir(ACPI_BATTERY_CLASS, acpi_root_dir);
@@ -93,39 +86,28 @@ struct proc_dir_entry *acpi_lock_battery
 		ACPI_DEBUG_PRINT((ACPI_DB_ERROR,
 				  "Cannot create %s\n", ACPI_BATTERY_CLASS));
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return acpi_battery_dir;
 }
-
 EXPORT_SYMBOL(acpi_lock_battery_dir);
 
 void acpi_unlock_battery_dir(struct proc_dir_entry *acpi_battery_dir_param)
 {
-
-	down(&cm_sbs_sem);
-	if (acpi_battery_dir_param) {
+	mutex_lock(&cm_sbs_mutex);
+	if (acpi_battery_dir_param)
 		lock_battery_dir_cnt--;
-	}
 	if (lock_battery_dir_cnt == 0 && acpi_battery_dir_param
 	    && acpi_battery_dir) {
 		remove_proc_entry(ACPI_BATTERY_CLASS, acpi_root_dir);
 		acpi_battery_dir = 0;
 	}
-	up(&cm_sbs_sem);
+	mutex_unlock(&cm_sbs_mutex);
 	return;
 }
-
 EXPORT_SYMBOL(acpi_unlock_battery_dir);
 
 static int __init acpi_cm_sbs_init(void)
 {
-
-	if (acpi_disabled)
-		return 0;
-
-	init_MUTEX(&cm_sbs_sem);
-
 	return 0;
 }
-
 subsys_initcall(acpi_cm_sbs_init);

_