Skip to contentSkip to conversation

i386: require ACPI for NUMA with generic architecture

PATCH Chuck Ebbert 2 participants 2 messages Jul 7, 2006

lore
Share & tools
lore
#0 lore raw

In-Reply-To: <[email protected]>

Quoted 10 lines · Keith Mannthey
Quoted 4 lines · Chuck Ebbert

X86 Generic Architecture (X86_GENERICARCH) includes support for Summit architecture. Enabling X86_GENERICARCH, SMP and HIGHMEM64G allows NUMA to be selected but that configuration will not build because it requires ACPI for the Summit NUMA support.

Good catch. With X86_GENRICARCARCH perhaps NUMA should always be on
or am I missing something with how it is supposed to work? Shouldn't X86_GENRICARCARCH buy you the ablility to boot(correctly) on all the diffrent archs listed?

AFAIK not all Summit machines are NUMA, so maybe the flexibility is needed. e.g. some might want GENERICARCH without HIGHMEM64G.

Signature · 2 lines
Chuck
 "You can't read a newspaper if you can't read."  --George W. Bush
#1 lore raw
Quoted 10 lines · Chuck Ebbert

In-Reply-To: <[email protected]>

Quoted 6 lines · Keith Mannthey
Quoted 4 lines · Chuck Ebbert

X86 Generic Architecture (X86_GENERICARCH) includes support for Summit architecture. Enabling X86_GENERICARCH, SMP and HIGHMEM64G allows NUMA to be selected but that configuration will not build because it requires ACPI for the Summit NUMA support.

Quoted 7 lines
Quoted 4 lines

Good catch. With X86_GENRICARCARCH perhaps NUMA should always be on
or am I missing something with how it is supposed to work? Shouldn't X86_GENRICARCARCH buy you the ablility to boot(correctly) on all the diffrent archs listed?

AFAIK not all Summit machines are NUMA, so maybe the flexibility is needed. e.g. some might want GENERICARCH without HIGHMEM64G.

I see you point. Flexability is good.

A non numa Summit box is just regular SMP. The Summit hw platform
is a multi node hardware layout and single nodes are valid and common. All Summit HW (numa and non) can boot regular smp kernels (numa boxes pay the performance hit). The Summit sub-arch is needed to setup i386 NUMA for the box in multi-node situations not to perform basic bootup.
Booting Summit without NUMA is sort of missing the point...

Thanks
Keith