Skip to contentSkip to conversation

2.6.18-rc1-mm1 on thinkpad x32

DISCUSSION Pavel Machek 2 participants 3 messages Jul 9, 2006 – Jul 11, 2006

lore
Share & tools
lore
#0 lore raw

Hi!

* acpi problems are gone, good -- it now boots with acpi=off and boots with enabled pci hotplugging.

(that uncovered other problem where machine dies if I try to undock it... This has worked before. I'll report it properly.)

* pcmcia ide now works, good.

* swsusp still works, thanks for speedup!
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
#1 lore raw
Quoted 8 lines · On Mon, 10 Jul 2006 00:52:08 +0200 Pavel Machek <[email protected]> wrote:

Hi!

* acpi problems are gone, good -- it now boots with acpi=off and boots with enabled pci hotplugging.

(that uncovered other problem where machine dies if I try to undock it... This has worked before. I'll report it properly.)

When you get your report for this ready, try to observe whether it happens if you boot undocked, then dock and then undock, or whether it will happen if you boot docked, then undock. I do have an outstanding issue with some docks that have ide ports on the station where if you boot docked, then undock, we can't properly remove the ide device. I am working on that one, but it's not solved yet.

#2 lore raw

HI!

Quoted 7 lines
Quoted 6 lines

* acpi problems are gone, good -- it now boots with acpi=off and boots with enabled pci hotplugging.

(that uncovered other problem where machine dies if I try to undock it... This has worked before. I'll report it properly.)

Quoted 6 lines

When you get your report for this ready, try to observe whether it happens if you boot undocked, then dock and then undock, or whether it will happen if you boot docked, then undock. I do have an outstanding issue with some docks that have ide ports on the station where if you boot docked, then undock, we can't properly remove the ide device. I am working on that one, but it's not solved yet.

I guess you can disregard this. I have mess between -rc1 and -rc1-mm1. -rc1 has some lockups that may be because of hotplug, but -rc1-mm1 seems to be okay.
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html