Skip to contentSkip to conversation

deprecate and convert some sleep_on variants.

PATCH Dave Jones 4 participants 5 messages Aug 1, 2006 – Aug 2, 2006

Subsystems (3)
lore
Share & tools
lore

Dave Jones

author
#0 lore raw

We've been carrying this for a dogs age in Fedora. It'd be good to get this in -mm, so that it stands some chance of getting upstreamed at some point.

drivers/block/DAC960.c +11 -1
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/block/DAC960.c linux-1070/drivers/block/DAC960.c
@@ -6132,6 +6132,9 @@ static boolean DAC960_V2_ExecuteUserComm
   unsigned long flags;
   unsigned char Channel, TargetID, LogicalDriveNumber;
   unsigned short LogicalDeviceNumber;
+  wait_queue_t __wait;
+  
+  init_waitqueue_entry(&__wait, current);
 
   spin_lock_irqsave(&Controller->queue_lock, flags);
   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
@@ -6314,11 +6317,18 @@ static boolean DAC960_V2_ExecuteUserComm
 					.SegmentByteCount =
 	    CommandMailbox->ControllerInfo.DataTransferSize;
 	  DAC960_ExecuteCommand(Command);
+	  add_wait_queue(&Controller->CommandWaitQueue, &__wait);
+	  set_current_state(TASK_UNINTERRUPTIBLE);
+	  
 	  while (Controller->V2.NewControllerInformation->PhysicalScanActive)
 	    {
 	      DAC960_ExecuteCommand(Command);
-	      sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
+	      schedule_timeout(HZ);
+	      set_current_state(TASK_UNINTERRUPTIBLE);
 	    }
+	  current->state = TASK_RUNNING;
+	  remove_wait_queue(&Controller->CommandWaitQueue, &__wait);
+	   
 	  DAC960_UserCritical("Discovery Completed\n", Controller);
  	}
     }
drivers/net/tokenring/ibmtr.c +8 -1
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/net/tokenring/ibmtr.c linux-1070/drivers/net/tokenring/ibmtr.c
@@ -850,6 +850,8 @@ static int tok_init_card(struct net_devi
 	struct tok_info *ti;
 	short PIOaddr;
 	unsigned long i;
+	wait_queue_t __wait;
+	init_waitqueue_entry(&__wait, current);
 
 	PIOaddr = dev->base_addr;
 	ti = (struct tok_info *) dev->priv;
@@ -862,13 +864,18 @@ static int tok_init_card(struct net_devi
 	current->state=TASK_UNINTERRUPTIBLE;
 	schedule_timeout(TR_RST_TIME); /* wait 50ms */
 
+	add_wait_queue(&ti->wait_for_reset, &__wait);
+	set_current_state(TASK_UNINTERRUPTIBLE);
 	outb(0, PIOaddr + ADAPTRESETREL);
 #ifdef ENABLE_PAGING
 	if (ti->page_mask)
 		writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN);
 #endif
 	writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN);
-	i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ);
+	#warning pci posting bug
+	i = schedule_timeout(4 * HZ);
+	current->state = TASK_RUNNING;
+	remove_wait_queue(&ti->wait_for_reset, &__wait);
 	return i? 0 : -EAGAIN;
 }
 
include/linux/wait.h +3 -3
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/include/linux/wait.h linux-1070/include/linux/wait.h
@@ -364,10 +364,10 @@ static inline void remove_wait_queue_loc
  * They are racy.  DO NOT use them, use the wait_event* interfaces above.  
  * We plan to remove these interfaces during 2.7.
  */
-extern void FASTCALL(sleep_on(wait_queue_head_t *q));
-extern long FASTCALL(sleep_on_timeout(wait_queue_head_t *q,
+extern void __deprecated FASTCALL(sleep_on(wait_queue_head_t *q));
+extern long __deprecated FASTCALL(sleep_on_timeout(wait_queue_head_t *q,
 				      signed long timeout));
-extern void FASTCALL(interruptible_sleep_on(wait_queue_head_t *q));
+extern void __deprecated FASTCALL(interruptible_sleep_on(wait_queue_head_t *q));
 extern long FASTCALL(interruptible_sleep_on_timeout(wait_queue_head_t *q,
 						    signed long timeout));
 
kernel/sched.c +15 -12
diff -urNp --exclude-from=/home/davej/.exclude linux-1060/kernel/sched.c linux-1070/kernel/sched.c
@@ -3118,10 +3118,21 @@ EXPORT_SYMBOL(wait_for_completion_interr
 	__remove_wait_queue(q, &wait);			\
 	spin_unlock_irqrestore(&q->lock, flags);
 
+#define SLEEP_ON_BKLCHECK				\
+	if (unlikely(!kernel_locked()) &&		\
+	    sleep_on_bkl_warnings < 10) {		\
+		sleep_on_bkl_warnings++;		\
+		WARN_ON(1);				\
+	}
+
+static int sleep_on_bkl_warnings;
+
 void fastcall __sched interruptible_sleep_on(wait_queue_head_t *q)
 {
 	SLEEP_ON_VAR
 
+	SLEEP_ON_BKLCHECK
+
 	current->state = TASK_INTERRUPTIBLE;
 
 	SLEEP_ON_HEAD
@@ -3135,6 +3146,8 @@ long fastcall __sched interruptible_slee
 {
 	SLEEP_ON_VAR
 
+	SLEEP_ON_BKLCHECK
+
 	current->state = TASK_INTERRUPTIBLE;
 
 	SLEEP_ON_HEAD
@@ -3759,22 +3759,12 @@ interruptible_sleep_on_timeout(wait_queu
 }
 EXPORT_SYMBOL(interruptible_sleep_on_timeout);
 
-void fastcall __sched sleep_on(wait_queue_head_t *q)
-{
-	SLEEP_ON_VAR
-
-	current->state = TASK_UNINTERRUPTIBLE;
-
-	SLEEP_ON_HEAD
-	schedule();
-	SLEEP_ON_TAIL
-}
-EXPORT_SYMBOL(sleep_on);
-
 long fastcall __sched sleep_on_timeout(wait_queue_head_t *q, long timeout)
 {
 	SLEEP_ON_VAR
 
+	SLEEP_ON_BKLCHECK
+
 	current->state = TASK_UNINTERRUPTIBLE;
 
 	SLEEP_ON_HEAD
Signature · 1 line
http://www.codemonkey.org.uk
#1 lore raw
Quoted 20 lines · Dave Jones

We've been carrying this for a dogs age in Fedora. It'd be good to get this in -mm, so that it stands some chance of getting upstreamed at some point.

diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/block/DAC960.c linux-1070/drivers/block/DAC960.c

drivers/block/DAC960.c +3 -0
@@ -6132,6 +6132,9 @@ static boolean DAC960_V2_ExecuteUserComm
   unsigned long flags;
   unsigned char Channel, TargetID, LogicalDriveNumber;
   unsigned short LogicalDeviceNumber;
+  wait_queue_t __wait;
+
+  init_waitqueue_entry(&__wait, current);
 
   spin_lock_irqsave(&Controller->queue_lock, flags);
   while ((Command = DAC960_AllocateCommand(Controller)) == NULL)

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6321

Quoted 5 lines
drivers/block/DAC960.c +2 -0
@@ -6314,11 +6317,18 @@ static boolean DAC960_V2_ExecuteUserComm
                                        .SegmentByteCount =
            CommandMailbox->ControllerInfo.DataTransferSize;
          DAC960_ExecuteCommand(Command);
+         add_wait_queue(&Controller->CommandWaitQueue, &__wait);
+         set_current_state(TASK_UNINTERRUPTIBLE);

Could this use prepare_to_wait()

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6327

Quoted 7 lines
drivers/block/DAC960.c +3 -1
+
          while (Controller->V2.NewControllerInformation->PhysicalScanActive)
            {
              DAC960_ExecuteCommand(Command);
-             sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
+             schedule_timeout(HZ);
+             set_current_state(TASK_UNINTERRUPTIBLE);

and schedule_timeout_uninterruptible() (which is redundant for the first invocation, I suppose)

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6330

Quoted 3 lines
drivers/block/DAC960.c +2 -0
            }
+         current->state = TASK_RUNNING;
+         remove_wait_queue(&Controller->CommandWaitQueue, &__wait);

and finish_wait()?

Same for ibmtr.c ?

Also, would these changes:

include/linux/wait.h

Quoted 3 lines

diff -urNp --exclude-from=/home/davej/.exclude linux-1060/include/linux/wait.h linux-1070/include/linux/wait.h

include/linux/wait.h +0 -0

Be better in a separate patch?

Thanks,
Nish

#2 lore raw
Quoted 8 lines · Nish Aravamudan
Quoted 6 lines · Dave Jones

We've been carrying this for a dogs age in Fedora. It'd be good to get this in -mm, so that it stands some chance of getting upstreamed at some point.

Quoted 7 lines

Also, would these changes:

include/linux/wait.h

Quoted 3 lines

diff -urNp --exclude-from=/home/davej/.exclude linux-1060/include/linux/wait.h linux-1070/include/linux/wait.h

include/linux/wait.h +0 -0

Be better in a separate patch?

As well as the changes to kernel/sched.c

-- Steve

author
#3 lore raw
In reply to Nish Aravamudan
Quoted 4 lines · Nish Aravamudan
Quoted 4 lines
drivers/block/DAC960.c +3 -0
+  wait_queue_t __wait;
+
+  init_waitqueue_entry(&__wait, current);
Quoted 10 lines

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6321

Quoted 8 lines
  spin_lock_irqsave(&Controller->queue_lock, flags);
  while ((Command = DAC960_AllocateCommand(Controller)) == NULL)
drivers/block/DAC960.c +2 -0
@@ -6314,11 +6317,18 @@ static boolean DAC960_V2_ExecuteUserComm
                                       .SegmentByteCount =
           CommandMailbox->ControllerInfo.DataTransferSize;
         DAC960_ExecuteCommand(Command);
+         add_wait_queue(&Controller->CommandWaitQueue, &__wait);
+         set_current_state(TASK_UNINTERRUPTIBLE);

Could this use prepare_to_wait()

Maybe, though I'd rather not do that conversion with the hardware to test it.
sidenote: prepare_to_wait() and friends could really use some kerneldoc explaining their purpose rather than their internal workings.

Quoted 10 lines

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6327

Quoted 7 lines
drivers/block/DAC960.c +2 -1
         while 
         (Controller->V2.NewControllerInformation->PhysicalScanActive)
           {
             DAC960_ExecuteCommand(Command);
-             sleep_on_timeout(&Controller->CommandWaitQueue, HZ);
+             schedule_timeout(HZ);
+             set_current_state(TASK_UNINTERRUPTIBLE);

and schedule_timeout_uninterruptible() (which is redundant for the first invocation, I suppose)

Makes sense.

Quoted 6 lines

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6330

Quoted 2 lines
drivers/block/DAC960.c +2 -0
+         current->state = TASK_RUNNING;
+         remove_wait_queue(&Controller->CommandWaitQueue, &__wait);

and finish_wait()?

Same for ibmtr.c ?

Same comments as above.

Quoted 8 lines

Also, would these changes:

include/linux/wait.h

Quoted 4 lines

diff -urNp --exclude-from=/home/davej/.exclude linux-1060/include/linux/wait.h linux-1070/include/linux/wait.h

include/linux/wait.h +0 -0

Be better in a separate patch?

A split-up patchset would for sure make sense for committing upstream. Though, at least each file touched here is a separate cset.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#4 lore raw
In reply to Dave Jones

Am Dienstag, 1. August 2006 20:06 schrieb Dave Jones:

Quoted 12 lines

We've been carrying this for a dogs age in Fedora. It'd be good to get this in -mm, so that it stands some chance of getting upstreamed at some point.

diff -urNp --exclude-from=/home/davej/.exclude linux-1060/drivers/block/DAC960.c linux-1070/drivers/block/DAC960.c --- linux-1060/drivers/block/DAC960.c
+++ linux-1070/drivers/block/DAC960.c

drivers/block/DAC960.c static boolean DAC960_V2_ExecuteUserComm · line 6137

Quoted 6 lines
drivers/block/DAC960.c +3 -0
@@ -6132,6 +6132,9 @@ static boolean DAC960_V2_ExecuteUserComm
   unsigned long flags;
   unsigned char Channel, TargetID, LogicalDriveNumber;
   unsigned short LogicalDeviceNumber;
+  wait_queue_t __wait;
+
+  init_waitqueue_entry(&__wait, current);

Is this only my opinion or is this really a bad choice for the queues name?

Eike