ucb1x00-ts: handle errors from input_register_device()
PATCH 1/1 ucb1x00-ts: handle errors from input_register_device()
I have not tested this (no hardware)
Signature · 111 lines
Dmitry Subject: ucb1x00-ts - handle errors from input_register_device() ucb1x00-ts: handle errors from input_register_device() Signed-off-by: Dmitry Torokhov <[email protected]> --- drivers/mfd/ucb1x00-ts.c | 49 ++++++++++++++++++++++++++++------------------- 1 files changed, 30 insertions(+), 19 deletions(-) Index: work/drivers/mfd/ucb1x00-ts.c =================================================================== --- work.orig/drivers/mfd/ucb1x00-ts.c +++ work/drivers/mfd/ucb1x00-ts.c @@ -58,6 +58,7 @@ static int adcsync; static inline void ucb1x00_ts_evt_add(struct ucb1x00_ts *ts, u16 pressure, u16 x, u16 y) { struct input_dev *idev = ts->idev; + input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); input_report_abs(idev, ABS_PRESSURE, pressure); @@ -67,6 +68,7 @@ static inline void ucb1x00_ts_evt_add(st static inline void ucb1x00_ts_event_release(struct ucb1x00_ts *ts) { struct input_dev *idev = ts->idev; + input_report_abs(idev, ABS_PRESSURE, 0); input_sync(idev); } @@ -189,6 +191,7 @@ static inline unsigned int ucb1x00_ts_re static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts) { unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR); + if (machine_is_collie()) return (!(val & (UCB_TS_CR_TSPX_LOW))); else @@ -291,6 +294,7 @@ static int ucb1x00_thread(void *_ts) static void ucb1x00_ts_irq(int idx, void *id) { struct ucb1x00_ts *ts = id; + ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); wake_up(&ts->irq_wait); } @@ -372,36 +376,43 @@ static int ucb1x00_ts_resume(struct ucb1 static int ucb1x00_ts_add(struct ucb1x00_dev *dev) { struct ucb1x00_ts *ts; + struct input_dev *idev; + int err; ts = kzalloc(sizeof(struct ucb1x00_ts), GFP_KERNEL); - if (!ts) - return -ENOMEM; - - ts->idev = input_allocate_device(); - if (!ts->idev) { - kfree(ts); - return -ENOMEM; + idev = input_allocate_device(); + if (!ts || !idev) { + err = -ENOMEM; + goto fail; } ts->ucb = dev->ucb; + ts->idev = idev; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; - ts->idev->private = ts; - ts->idev->name = "Touchscreen panel"; - ts->idev->id.product = ts->ucb->id; - ts->idev->open = ucb1x00_ts_open; - ts->idev->close = ucb1x00_ts_close; - - __set_bit(EV_ABS, ts->idev->evbit); - __set_bit(ABS_X, ts->idev->absbit); - __set_bit(ABS_Y, ts->idev->absbit); - __set_bit(ABS_PRESSURE, ts->idev->absbit); - - input_register_device(ts->idev); + idev->private = ts; + idev->name = "Touchscreen panel"; + idev->id.product = ts->ucb->id; + idev->open = ucb1x00_ts_open; + idev->close = ucb1x00_ts_close; + + __set_bit(EV_ABS, idev->evbit); + __set_bit(ABS_X, idev->absbit); + __set_bit(ABS_Y, idev->absbit); + __set_bit(ABS_PRESSURE, idev->absbit); + + err = input_register_device(idev); + if (err) + goto fail; dev->priv = ts; return 0; + + fail: + input_free_device(idev); + kfree(ts); + return err; } static void ucb1x00_ts_remove(struct ucb1x00_dev *dev)
Hi!
Quoted 1 line
I have not tested this (no hardware)
Looks okay to me. I have hardware here, but have not tested it (no time, sorry).
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html