suggested patch for PROBLEM: I/O Error attempting to read last partial block of a file in an ISO9660 file system
[1.] One line summary of the problem:
I/O Error attempting to read last partial block of a file in ISO9660 file system.
[2.] Full description of the problem/report:
In an ISO9660 filesystem that I have, the kernel fails to read several of the larger files. Now that I solved the problem, I will spare you the many more details that I discovered as I went along.
[3.] Keywords (i.e., modules, networking, kernel):
ISO9660, isofs, filesystems
[4.] Kernel version (from /proc/version):
The patch is based on 2.6.17.8, but it was tested on 2.6.11.4-20a-default (SuSE 9.3). (The code in the patch area had not changed.)
[5.] No Oops.. message.
[6.] A small shell script or example program which triggers the
problem (if possible)
The ISO9660 filesystem that I have is around 500 MB, and I do not have any small way to reproduce the problem, but I think someone could make a small image to trigger the problem and/or verify that it does not exist in the future. See the comments in the attached patch. My image was produced by DirectCD, and it probably will not put a file in more than one section unless the file is over around 15 MB.
[7.] Environment
Nothing special. I worked from both CD-ROM and a file image of it. I used various programs, but mostly dd and isodump for investigating the problem. I used several kernel versions (even a 2.4, which has worse problems with files comprising multiple sections), and various hardware.
[X.] Other notes, patches, fixes, workarounds:
I assume that the mailing list prefers a small patch inline, but I will attach this one as well so that if I failed to properly disable line breaking in my mailer, there will be a copy with lines intact.
I apologize for any lapse in protocol. I am not subscribed to the list and am trying to be helpful.
Joel VanderZee
--------
Patch for linux-2.6.17.8 (tested on 2.6.11.4-20a-default)
There was an I/O error that prevented reading the last partial block of large files in an ISO9660 filesystem. The error was generated when a file comprised more than one section and had a size that was not an exact multiple of the filesystem block size. This patch removes the check (and failure) for reading into the last partial block (and possibly beyond) for multiple-section files.
It worked in my testing to prevent reading beyond the end of the section; my first patch just incremented the sect_size block count for a partial block and continued doing the check. But there is a commment in the source code about reading beyond the end of the file to fill a page cache. Failing to access beyond the section would prevent reading beyond the end of the file.
Suggested patch by Joel VanderZee. Version 3.
isofs/inode.c renamed from isofs/inode_orig.c +25 -25
@@ -961,31 +961,31 @@ iblock, (unsigned long) inode->i_size); goto abort; } - -if (nextblk) { -while (b_off >= (offset + sect_size)) { -struct inode *ninode; - - offset += sect_size; -if (nextblk ==0 ) - goto abort; - ninode =isofs_iget (inode->i_sb, nextblk, nextoff); -if (!ninode) - goto abort; - firstext =ISOFS_I (ninode)->i_first_extent; - sect_size =ISOFS_I (ninode)->i_section_size >>ISOFS_BUFFER_BITS (ninode); - nextblk =ISOFS_I (ninode)->i_next_section_block; - nextoff =ISOFS_I (ninode)->i_next_section_offset; -iput (ninode); - -if (++section >100 ) { -printk ("isofs_get_blocks: More than 100 file sections ?!?, aborting...\n" ); -printk ("isofs_get_blocks: block=%ld firstext=%u sect_size=%u " -"nextblk=%lu nextoff=%lu\n" , - iblock, firstext, (unsigned ) sect_size, - nextblk, nextoff); - goto abort; - } + +/* On the last section, nextblk == 0, section size is likely to +* exceed sect_size by a partial block, and access beyond the +* end of the file will reach beyond the section size, too. +*/ +while (nextblk && (b_off >= (offset + sect_size))) { +struct inode *ninode; + + offset += sect_size; + ninode =isofs_iget (inode->i_sb, nextblk, nextoff); +if (!ninode) + goto abort; + firstext =ISOFS_I (ninode)->i_first_extent; + sect_size =ISOFS_I (ninode)->i_section_size >>ISOFS_BUFFER_BITS (ninode); + nextblk =ISOFS_I (ninode)->i_next_section_block; + nextoff =ISOFS_I (ninode)->i_next_section_offset; +iput (ninode); + +if (++section >100 ) { +printk ("isofs_get_blocks: More than 100 file sections ?!?, aborting...\n" ); +printk ("isofs_get_blocks: block=%ld firstext=%u sect_size=%u " +"nextblk=%lu nextoff=%lu\n" , + iblock, firstext, (unsigned ) sect_size, + nextblk, nextoff); + goto abort; } }
Patch for linux-2.6.17.8 (tested on 2.6.11.4-20a-default)
There was an I/O error that prevented reading the last partial block of large files in an ISO-9660 filesystem. The error was generated when a file comprised more than one section and had a size that was not an exact multiple of the filesystem block size. This patch removes the check (and failure) for reading into the last partial block (and possibly beyond) for multiple-section files.
It worked in my testing to prevent reading beyond the end of the section; my first patch just incremented the sect_size block count for a partial block and continued doing the check. But there is a commment in the source code about reading beyond the end of the file to fill a page cache. Failing to access beyond the section would prevent reading beyond the end of the file.
Suggested patch by Joel VanderZee. Version 3.
isofs/inode.c renamed from isofs/inode_orig.c +25 -25
56 lines not on this page · raw message