boot problems on pseries
Hello,
I'm switching from an IBM 486 and purchasing an IBM H50 (7026-H50), so I'm new to the PPC. My vendor wants to ensure that it boots linux before he ships it. I burned and sent him a few different distro CDs to try and none boot. We can get yaboot to boot then get stuck at the yaboot command line and can't get futher. As a fall-back, I was hoping to use OF to boot the kernel directly and get a kernel-panic when it can't find init but we can't get that far either. The error message 'claim failed' is returned immediatly with no indication that the kernel tried to start.
I'm told by several people that the H50 is the same as the F50 in a different format and that the F50 is known to work. Since the task at hand is to get any linux to boot and not to actually install linux, I need a kernel that will boot. Even a simple boot-floppy set would be great.
Does anyone have a link to a boot/root floppy set that will work?
Hardware details: IBM 7026-H50, 256 MB ram, dual PPC 604e 332 MHz, 9.1 GB HD in Bay 2, standard CD-ROM, PowerGXT130P graphics accelerator.
Thanks,
Doug.
Quoted 1 line · On Sun, Aug 20, 2006 at 01:00:56PM -0400, [email protected] wrote:
Does anyone have a link to a boot/root floppy set that will work?
openSuSE will likely work, but do you have any details of the boot failures and what exactly you have tried so far?
Quoted 8 lines · Olaf Hering
Quoted 1 line · On Sun, Aug 20, 2006 at 01:00:56PM -0400, [email protected] wrote:
Does anyone have a link to a boot/root floppy set that will work?
openSuSE will likely work, but do you have any details of the boot failures and what exactly you have tried so far?
Boot failures:
1. CD not recognized as bootable, so use OF manually.
2. OF manually will boot yaboot.
3. yaboot doesn't find its config in the /etc directory
of the cd, nor in the / directory of the CD with the yaboot executable.
4. when manually from yaboot attempt to boot a kernel
image, get either:
a) CLAIMED FAILED
b) incorrect ELF format
(something like that, I wasn't there when the tech got that one)
c) not a valid kernel image
At no point do I get any indication that the linux kernel has had a chance to try booting; it doesn't get that far.
Thanks,
I'll look at SuSE and see if there's a free-download of a boot floppy.
Doug.
Quoted 15 lines · On Tue, Aug 22, [email protected] wrote:
Boot failures:
1. CD not recognized as bootable, so use OF manually.
2. OF manually will boot yaboot.
3. yaboot doesn't find its config in the /etc directory
of the cd, nor in the / directory of the CD with the yaboot executable.
4. when manually from yaboot attempt to boot a kernel
image, get either:
a) CLAIMED FAILED
b) incorrect ELF format
(something like that, I wasn't there when the tech got that one)
c) not a valid kernel image
Quoted 2 lines
At no point do I get any indication that the linux kernel has had a chance to try booting; it doesn't get that far.
I havent seen that sort of error, maybe a bad burn.
Quoted 1 line
I'll look at SuSE and see if there's a free-download of a boot floppy.
http://mirrors.kernel.org/opensuse/distribution/SL-stable/iso/SUSE-Linux-10.1-GM-ppc-mini.iso
http://mirrors.kernel.org/opensuse/distribution/SL-OSS-factory/inst-source/boot/boot.ppc.iso
You can try to boot the inst32 file via the network. Make sure to fix the ARP entry for the H50 on the tftp server, like 'arp -s 1.2.3.4 MAC' yaboot.ibm can also be used. Rename yaboot.cnf to yaboot.conf so yaboot will be able to download it.
Quoted 10 lines · On Tue, Aug 22, 2006 at 12:50:26PM -0400, [email protected] wrote:
Boot failures:
1. CD not recognized as bootable, so use OF manually.
2. OF manually will boot yaboot.
3. yaboot doesn't find its config in the /etc directory
of the cd, nor in the / directory of the CD with the yaboot executable.
4. when manually from yaboot attempt to boot a kernel
image, get either:
a) CLAIMED FAILED
Olaf's suggestion to use netboot is a good one.
Have you tried googling "yaboot claim fail"?
I see suggetions to run yabootconfig, which normally writes stuff to a special boot partition at /dev/sda1 No clue how to do this for a CD.
The BSD faq has a long discussion
http://www.netbsd.org/Ports/macppc/faq.html#ofw-claim-failed
which seems to indicate that some load or offset is being incorrectly specified.
There seem to be plenty of other discussions as well
--linas