How to identify serial ports (ttySn)?
On a regular basis, /dev/ttySnn devices gets renumbered with next kernel version.
For example, we've a PCI serial card (NetMos in this case), with, say, one serial port on it. Plus some ports on the motherboard (usually one or two). The question is where's the NetMos port, on which /dev/ttySnn?
Some time ago, probably at the time of linux 2.4, netmos device number was dependent on the max. number of "standard" serial ports configured in the kernel during compile. Ie, if it where set to 8 (ttyS0..ttyS7), netmos one becomes ttyS8. If set to 4, netmos was ttyS4 etc. I always configured 8 ports in the kernel, so my netmos card was always been ttyS8.
Next, with 2.6.something which was the first 2.6 I tried, it suddenly become ttyS4. I don't remember the details already. So I reconfigured all the machines (it was UPS control program which is sitting on that port) to use another device.
At least 2.6.11 assigns ttyS3 to the device, saying the first two ports are reserved for the onboard devices. So I again reconfigured the app to use ttyS3 (or ttyS2 - I'm not sure).
Now, with 2.6.17, the netmos port is ttyS1. Because in reality, on the motherboard there's only one serial port soldered (that's the reason why we got the netmos card in the first place), so "next unused" device is ttyS1.
So the question is: how to find where's the thing on the running kernel, and where it will be with next version? Is there a way to assign a name for the thing, so it will be independent of the current kernel? I just want to use it, the hardware is *constant* for several years, but each kernel release gives yet another surprize, here or there.
And please don't tell me that's some udev thing. there's no need to run that f*cked udev on all those machines, the hardware is stable for many years, there's no hotpluggable, usb or not, devices of any sort.
More, there's no way to assign constant name for that thing with udev, too - it seems. Serial ports exports no useful information to be identified.
Thanks.
/mjt
Quoted 5 lines · Michael Tokarev
For example, we've a PCI serial card (NetMos in this case), with, say, one serial port on it. Plus some ports on the motherboard (usually one or two). The question is where's the NetMos port, on which
/dev/ttySnn?
/sys/devices/pciwhatever/tty:ttyS*
Quoted 17 lines
Next, with 2.6.something which was the first 2.6 I tried, it suddenly become ttyS4. I don't remember the details already. So I reconfigured all the machines (it was UPS control program which is sitting on that port) to use another device.
At least 2.6.11 assigns ttyS3 to the device, saying the first two ports are reserved for the onboard devices. So I again reconfigured the app to use ttyS3 (or ttyS2 - I'm not sure).
Now, with 2.6.17, the netmos port is ttyS1. Because in reality, on the motherboard there's only one serial port soldered (that's the reason why we got the netmos card in the first place), so "next unused" device is ttyS1.
Quoted 7 lines
So the question is: how to find where's the thing on the running kernel, and where it will be with next version? Is there a way to assign a name for the thing, so it will be independent of the current kernel? I just want to use it, the hardware is *constant* for several years, but each kernel release gives yet another surprize, here or there.
No idea, but at a guess your kernel configuration changed in some way, or you didn't think enough about the new options which were added.
The behaviour of serial has not changed - if the port is already known to the kernel, it does it's damnest best to keep the same port.
If it isn't already known, it will look for the first totally unused port and unassigned port which has not been previously used.
If it can't find one, it'll find an unused port which has been previously used.
No idea what changed between 2.6.something and 2.6.11 - do you have the contents of /proc/tty/driver/serial without the PCI driver loaded in each case? If not, can't help, sorry.
In the 2.6.11 to 2.6.17 case, you've been bitten by the "only want present ports to appear in my kernel thankyou" udev-based lobby. There's now a configuration option/kernel command line/8250 module option to set the number of ports. It sounds like your kernel has it set to 2, causing only ttyS0 and ttyS1 to be available.
In the kernel configuration, it's called 'SERIAL_8250_RUNTIME_UARTS'. On the kernel command line, it's something like '8250.nr_uarts', and the module option is 'nr_uarts'.
If you set this to 4 + number of PCI serial ports, you'll get your PCI ports starting at ttyS4 as it was in old times.
(Note: this is not a change I approved of - I knew it would cause people problems, so please don't direct your anger, which is obvious from your email, at me.)
Signature · 3 lines
Russell King Linux kernel 2.6 ARM Linux - http://www.arm.linux.org.uk/ maintainer of: 2.6 Serial core