hwmon: New driver k8temp
Subsystems (3)
PATCH 12/14 hwmon: New driver k8temp
From: Rudolf Marek <r.marek at sh.cvut.cz>
Content-Disposition: inline; filename=hwmon-k8temp-new-driver.patch
Add support for the temperature sensor(s) found in AMD K8 CPUs.
Signed-off-by Rudolf Marek <r.marek at sh.cvut.cz>
Signed-off-by Jean Delvare <khali at linux-fr.org>
--- drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/k8temp.c | 292 +++++++++++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 1 + 4 files changed, 304 insertions(+)
include/linux/pci_ids.h +1 -0
@@ -479,6 +479,7 @@#define PCI_VENDOR_ID_AMD 0x1022#define PCI_DEVICE_ID_AMD_K8_NB 0x1100 +#define PCI_DEVICE_ID_AMD_K8_NB_MISC 0x1103#define PCI_DEVICE_ID_AMD_LANCE 0x2000#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001#define PCI_DEVICE_ID_AMD_SCSI 0x2020
drivers/hwmon/k8temp.c new file +291 -0
291 lines not on this page · raw message
drivers/hwmon/Kconfig +10 -0
@@ -94,6 +94,16 @@ This driver can also be built as a module. If so, the module will be called adm9240. +config SENSORS_K8TEMP + tristate "AMD K8 processor sensor" + depends on HWMON && X86 && PCI && EXPERIMENTAL + help + If you say yes here you get support for the temperature + sensor(s) inside your AMD K8 CPU. + + This driver can also be built as a module. If so, the module + will be called k8temp. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on HWMON && I2C && EXPERIMENTAL
drivers/hwmon/Makefile +1 -0
@@ -27,6 +27,7 @@ obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_IT87) += it87.o +obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o obj-$(CONFIG_SENSORS_LM63) += lm63.o obj-$(CONFIG_SENSORS_LM70) += lm70.o obj-$(CONFIG_SENSORS_LM75) += lm75.o
Signature · 1 line
Jean Delvare