generic PAGE_SIZE infrastructure (v2)
Subsystems (6)
RFC PATCH 1/7 generic PAGE_SIZE infrastructure (v2)
Christoph Lameter suggested that I break this up into a few more patches. This one should at least break out the architectures where some real thinking is involved from the trivial ones that have a simple definition of PAGE_SIZE/SHIFT.
----
All architectures currently explicitly define their page size. In some cases (ppc, parisc, ia64, sparc64, mips) this size is somewhat configurable.
There several reimplementations of ways to make sure that PAGE_SIZE is usable in assembly code, yet still somewhat type safe for use in C code (as a UL type). These are all very similar. There are also a number of macros based off of PAGE_SIZE/SHIFT which are duplicated across architectures.
This patch unifies all of those definitions. It defines PAGE_SIZE in a single header which gets its definitions from Kconfig. The new Kconfig options mirror what used to be done with #ifdefs and arch-specific Kconfig options. The new Kconfig menu eliminates the need for parisc, ia64, and sparc64 to have their own "choice" menus for selecting page size. The help text has been adapted from these three architectures, but is now more generic.
For now, architectures must enable GENERIC_PAGE_SIZE in order to get this new code. This option will be removed by the last patch in the series.
Why am I doing this? The OpenVZ beancounter patch hooks into the alloc_thread_info() path, but only in two architectures. It is silly to patch each and every architecture when they all just do the same thing. This is the first step to have a single place in which to do alloc_thread_info(). Oh, and this series removes about 300 lines of code.
46 files changed, 178 insertions(+), 514 deletions(-)
---
threadalloc-dave/include/asm-generic/page.h | 33 ++++++++++++++++++-- threadalloc-dave/mm/Kconfig | 45 ++++++++++++++++++++++++++++ 2 files changed, 75 insertions(+), 3 deletions(-)
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +30 -3
@@ -1,10 +1,38 @@#ifndef _ASM_GENERIC_PAGE_H#define _ASM_GENERIC_PAGE_H +#include <linux/compiler.h> +#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#include <linux/compiler.h> +#ifdef CONFIG_ARCH_GENERIC_PAGE_SIZE +#ifdef __ASSEMBLY__ +#define ASM_CONST (x) x +#else +#define __ASM_CONST (x) x##UL +#define ASM_CONST (x) __ASM_CONST(x) +#endif + +#define PAGE_SHIFT CONFIG_PAGE_SHIFT +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN (addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN (addr) _ALIGN(addr, PAGE_SIZE) + +/* +* Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we +* assign PAGE_MASK to a larger type it gets extended the way we want +* (i.e. with 1s in the high bits) +*/ +#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#endif /* CONFIG_ARCH_GENERIC_PAGE_SIZE */ /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size)
@@ -20,7 +48,6 @@ static __inline__ __attribute_const__ inreturn order; } -#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_GENERIC_PAGE_H */
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +45 -0
48 lines not on this page · raw message
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 2/7 ia64 generic PAGE_SIZE
This is the ia64 portion to convert it over to the generic PAGE_SIZE framework.
* Change all references to CONFIG_IA64_PAGE_SIZE_*KB to CONFIG_PAGE_SIZE_* and update the defconfigs.
* remove ia64-specific Kconfig menu
* add ia64 default of 16k pages to mm/Kconfig
* add support for 8k and 16k pages, plus 64k if !ITANIUM
---
threadalloc-dave/include/asm-ia64/ptrace.h | 6 +-- threadalloc-dave/include/asm-ia64/page.h | 21 ---------- threadalloc-dave/arch/ia64/Kconfig | 34 +---------------- threadalloc-dave/arch/ia64/configs/bigsur_defconfig | 8 ++-- threadalloc-dave/arch/ia64/configs/gensparse_defconfig | 8 ++-- threadalloc-dave/arch/ia64/configs/sim_defconfig | 8 ++-- threadalloc-dave/arch/ia64/configs/sn2_defconfig | 8 ++-- threadalloc-dave/arch/ia64/configs/tiger_defconfig | 8 ++-- threadalloc-dave/arch/ia64/configs/zx1_defconfig | 8 ++-- threadalloc-dave/arch/ia64/defconfig | 8 ++-- threadalloc-dave/mm/Kconfig | 4 ++ 11 files changed, 38 insertions(+), 83 deletions(-)
include/asm-ia64/ptrace.h renamed from include/asm-ia64/ptrace.h~ia64 +3 -3
@@ -64,11 +64,11 @@* Base-2 logarithm of number of pages to allocate per task structure * (including register backing store and memory stack): */ -#if defined(CONFIG_IA64_PAGE_SIZE_4KB ) +#if defined(CONFIG_PAGE_SIZE_4KB )# define KERNEL_STACK_SIZE_ORDER 3 -#elif defined(CONFIG_IA64_PAGE_SIZE_8KB ) +#elif defined(CONFIG_PAGE_SIZE_8KB )# define KERNEL_STACK_SIZE_ORDER 2 -#elif defined(CONFIG_IA64_PAGE_SIZE_16KB ) +#elif defined(CONFIG_PAGE_SIZE_16KB )# define KERNEL_STACK_SIZE_ORDER 1#else # define KERNEL_STACK_SIZE_ORDER 0
include/asm-ia64/page.h renamed from include/asm-ia64/page.h~ia64 +1 -20
@@ -7,7 +7,7 @@* David Mosberger-Tang <[email protected]> */ - +#include <asm-generic/page.h> #include <asm/intrinsics.h> #include <asm/types.h>
@@ -24,25 +24,6 @@#define RGN_GATE 5/* Gate page, Kernel text, etc */ #define RGN_HPAGE 4/* For Huge TLB pages */ -/* -* PAGE_SHIFT determines the actual kernel page size. -*/ -#if defined(CONFIG_IA64_PAGE_SIZE_4KB ) -# define PAGE_SHIFT 12 -#elif defined(CONFIG_IA64_PAGE_SIZE_8KB ) -# define PAGE_SHIFT 13 -#elif defined(CONFIG_IA64_PAGE_SIZE_16KB ) -# define PAGE_SHIFT 14 -#elif defined(CONFIG_IA64_PAGE_SIZE_64KB ) -# define PAGE_SHIFT 16 -#else -# error Unsupported page size! -#endif - -#define PAGE_SIZE (__IA64_UL_CONST(1) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE - 1)) -#define PAGE_ALIGN (addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) -#define PERCPU_PAGE_SHIFT 16/* log2() of max. size of per-CPU area */ #define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
arch/ia64/Kconfig renamed from arch/ia64/Kconfig~ia64 +2 -32
@@ -149,38 +149,8 @@ config MCKINLEY endchoice -choice - prompt "Kernel page size" - default IA64_PAGE_SIZE_16KB - -config IA64_PAGE_SIZE_4KB - bool "4KB" - help - This lets you select the page size of the kernel. For best IA-64 - performance, a page size of 8KB or 16KB is recommended. For best - IA-32 compatibility, a page size of 4KB should be selected (the vast - majority of IA-32 binaries work perfectly fine with a larger page - size). For Itanium 2 or newer systems, a page size of 64KB can also - be selected. - - 4KB For best IA-32 compatibility - 8KB For best IA-64 performance - 16KB For best IA-64 performance - 64KB Requires Itanium 2 or newer processor. - - If you don't know what to do, choose 16KB. - -config IA64_PAGE_SIZE_8KB - bool "8KB" - -config IA64_PAGE_SIZE_16KB - bool "16KB" - -config IA64_PAGE_SIZE_64KB - depends on !ITANIUM - bool "64KB" - -endchoice +config ARCH_GENERIC_PAGE_SIZE + def_bool y choice prompt "Page Table Levels"
arch/ia64/configs/bigsur_defconfig renamed from arch/ia64/configs/bigsur_defconfig~ia64 +4 -4
@@ -98,10 +98,10 @@ CONFIG_IA64_DIG=y # CONFIG_IA64_HP_SIM is not set CONFIG_ITANIUM=y # CONFIG_MCKINLEY is not set -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
arch/ia64/configs/gensparse_defconfig renamed from arch/ia64/configs/gensparse_defconfig~ia64 +4 -4
@@ -99,10 +99,10 @@ CONFIG_IA64_GENERIC=y # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
arch/ia64/configs/sim_defconfig renamed from arch/ia64/configs/sim_defconfig~ia64 +4 -4
@@ -99,10 +99,10 @@ CONFIG_DMA_IS_DMA32=y CONFIG_IA64_HP_SIM=y # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -# CONFIG_IA64_PAGE_SIZE_16KB is not set -CONFIG_IA64_PAGE_SIZE_64KB=y +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_64KB=y CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
arch/ia64/configs/sn2_defconfig renamed from arch/ia64/configs/sn2_defconfig~ia64 +4 -4
@@ -98,10 +98,10 @@ CONFIG_IA64_SGI_SN2=y # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set # CONFIG_PGTABLE_3 is not set CONFIG_PGTABLE_4=y # CONFIG_HZ_100 is not set
arch/ia64/configs/tiger_defconfig renamed from arch/ia64/configs/tiger_defconfig~ia64 +4 -4
@@ -99,10 +99,10 @@ CONFIG_IA64_DIG=y # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
arch/ia64/configs/zx1_defconfig renamed from arch/ia64/configs/zx1_defconfig~ia64 +4 -4
@@ -97,10 +97,10 @@ CONFIG_IA64_HP_ZX1=y # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
arch/ia64/defconfig renamed from arch/ia64/defconfig~ia64 +4 -4
@@ -99,10 +99,10 @@ CONFIG_IA64_GENERIC=y # CONFIG_IA64_HP_SIM is not set # CONFIG_ITANIUM is not set CONFIG_MCKINLEY=y -# CONFIG_IA64_PAGE_SIZE_4KB is not set -# CONFIG_IA64_PAGE_SIZE_8KB is not set -CONFIG_IA64_PAGE_SIZE_16KB=y -# CONFIG_IA64_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_4KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PAGE_SIZE_16KB=y +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_PGTABLE_3=y # CONFIG_PGTABLE_4 is not set # CONFIG_HZ_100 is not set
mm/Kconfig renamed from mm/Kconfig~ia64 +4 -0
@@ -6,6 +6,7 @@ choice prompt "Kernel Page Size" depends on ARCH_GENERIC_PAGE_SIZE + default PAGE_SIZE_16KB if IA64 config PAGE_SIZE_4KB bool "4KB" help
@@ -23,10 +24,13 @@ config PAGE_SIZE_4KB Otherwise, choose 4KB. config PAGE_SIZE_8KB bool "8KB" + depends on IA64 config PAGE_SIZE_16KB bool "16KB" + depends on IA64 config PAGE_SIZE_64KB bool "64KB" + depends on (IA64 && !ITANIUM) config PAGE_SIZE_512KB bool "512KB" config PAGE_SIZE_4MB
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC][PATCH 2/7] ia64 generic PAGE_SIZE
arch/ia64/Kconfig config MCKINLEY · line 183
Quoted 5 lines · Dave Hansen
arch/ia64/Kconfig renamed from arch/ia64/Kconfig~ia64 +0
-5-config IA64_PAGE_SIZE_64KB - depends on !ITANIUM - bool "64KB" - -endchoice
Uhh.. arch specific stuff in mm/Kconfig. Each arch needs to modify the mm/Kconfig?
Also cc [email protected] on these.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC][PATCH 2/7] ia64 generic PAGE_SIZE
Quoted 9 lines · Christoph Lameter
arch/ia64/Kconfig config MCKINLEY · line 183
Quoted 5 lines · Dave Hansen
arch/ia64/Kconfig renamed from arch/ia64/Kconfig~ia64 +0
-5-config IA64_PAGE_SIZE_64KB - depends on !ITANIUM - bool "64KB" - -endchoiceUhh.. arch specific stuff in mm/Kconfig. Each arch needs to modify the mm/Kconfig?
Yes and no. First of all, 15 of the 24 architectures use the Kconfig default of 4k pages. Anybody adding an architecture with 4k pages only has to include asm-generic/page.h in their arch, and they don't add *anything* to Kconfig. If they want completely fixed page sizes other than 4k, they only add '|| ARCH' on one line in the Kconfig.
There are a couple of ways to go about enabling the configurable page sizes. One is to do what I did, hand have all of the architectures enumerated in mm/Kconfig. The other is to have something along the lines of:
choice
prompt "Kernel Page Size"
depends on ARCH_CHOOSES_PAGE_SIZE
...
Then in arch/{ia64,...}/Kconfig, have
config ARCH_CHOOSES_PAGE_SIZE
def_bool y
That would be easy enough to do. However, what I wanted to get out of this was to be able to look at mm/Kconfig and get a really nice overview of what *everybody* is doing. I'd be more inclined to do the ARCH_CHOOSES... stuff if the architecture-specific conditions were actually complicated. They really aren't.
Admittedly, this is a bit different from how it has been done traditionally, but is is a really great tool for anyone working on arch-generic code that wants to know "what architectures have an 8k page size", or "what arches have a configurable page size". This makes one place to go look, with zero grepping.
Quoted 1 line
Also cc [email protected] on these.
Sure thing.
-- Dave
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC][PATCH 2/7] ia64 generic PAGE_SIZE
Quoted 5 lines · Dave Hansen
Yes and no. First of all, 15 of the 24 architectures use the
Kconfigdefault of 4k pages. Anybody adding an architecture with 4k pages only has to includeasm-generic/page.hin their arch, and they don't add *anything* toKconfig. If they want completely fixed page sizes other than 4k, they only add '|| ARCH' on one line in theKconfig.
Lets keep the arch specific stuff out of mm/Kconfig.
Quoted 10 lines
There are a couple of ways to go about enabling the configurable page sizes. One is to do what I did, hand have all of the architectures enumerated in mm/Kconfig. The other is to have something along the lines of:
choice
prompt "Kernel Page Size"
depends onARCH_CHOOSES_PAGE_SIZE
...
Quoted 4 lines
Then in
arch/{ia64,...}/Kconfig, haveconfig
ARCH_CHOOSES_PAGE_SIZE
def_booly
How about having definitions like ARCH_SUPPORTS_4/8/16k_PAGESIZE and ARCH_DEFAULT_4/8/16k_PAGESIZE and use those in mm/Kconfig. That way you keep the arch specific stuff out. Each arch just sets up whatever it supports.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Re: [RFC][PATCH 2/7] ia64 generic PAGE_SIZE
Quoted 1 line · Christoph Lameter
Lets keep the arch specific stuff out of mm/Kconfig.
I know that the normal way of doing things has been with ARCH_SUPPORTS_FOO defined in arch/Kconfig. But, I really like the alternate approach because it is so easy to figure out which architectures support which page sizes with a single glance at the Kconfig file.
I can really see putting another layer of indirection in there if things were too complicated to understand at a glance, but I think they've remained pretty simple.
Is there any specific reason that you dislike the arch-specific stuff in mm/Kconfig?
I don't mind creating those other Kconfig options, but I'm not really sure I see a concrete reason for it, yet.
-- Dave
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 3/7 sparc64 generic PAGE_SIZE
In reply to Dave HansenThis is the sparc64 portion to convert it over to the generic PAGE_SIZE framework.
* Change all references to CONFIG_SPARC64_PAGE_SIZE_*KB to CONFIG_PAGE_SIZE_* and update the defconfig.
* remove sparc64-specific Kconfig menu
* add sparc64 default of 8k pages to mm/Kconfig
* remove generic support for 4k pages
* add support for 8k, 64k, 512k, and 4MB pages
---
threadalloc-dave/include/asm-sparc64/page.h | 19 ---------------- threadalloc-dave/include/asm-sparc64/mmu.h | 8 +++---- threadalloc-dave/arch/sparc64/Kconfig | 32 +++------------------------- threadalloc-dave/arch/sparc64/defconfig | 8 +++---- threadalloc-dave/arch/sparc64/mm/tsb.c | 8 +++---- threadalloc-dave/mm/Kconfig | 8 +++++-- 6 files changed, 23 insertions(+), 60 deletions(-)
include/asm-sparc64/page.h renamed from include/asm-sparc64/page.h~sparc64 +1 -18
@@ -4,21 +4,7 @@#define _SPARC64_PAGE_H#include <asm/const.h> - -#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB ) -#define PAGE_SHIFT 13 -#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB ) -#define PAGE_SHIFT 16 -#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB ) -#define PAGE_SHIFT 19 -#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB ) -#define PAGE_SHIFT 22 -#else -#error No page size specified in kernel configuration -#endif - -#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> /* Flushing for D-cache alias handling is only needed if * the page size is smaller than 16K.
@@ -114,9 +100,6 @@ typedef unsigned long pgprot_t;#endif /* !(__ASSEMBLY__) */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* We used to stick this into a hard-coded global register (%g4) * but that does not make sense anymore. */
include/asm-sparc64/mmu.h renamed from include/asm-sparc64/mmu.h~sparc64 +4 -4
@@ -30,13 +30,13 @@#define CTX_PGSZ_MASK ((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \ (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT)) -#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB ) +#if defined(CONFIG_PAGE_SIZE_8KB )#define CTX_PGSZ_BASE CTX_PGSZ_8KB -#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB ) +#elif defined(CONFIG_PAGE_SIZE_64KB )#define CTX_PGSZ_BASE CTX_PGSZ_64KB -#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB ) +#elif defined(CONFIG_PAGE_SIZE_512KB )#define CTX_PGSZ_BASE CTX_PGSZ_512KB -#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB ) +#elif defined(CONFIG_PAGE_SIZE_4MB )#define CTX_PGSZ_BASE CTX_PGSZ_4MB#else #error No page size specified in kernel configuration
arch/sparc64/Kconfig renamed from arch/sparc64/Kconfig~sparc64 +4 -28
@@ -34,32 +34,8 @@ config ARCH_MAY_HAVE_PC_FDC bool default y -choice - prompt "Kernel page size" - default SPARC64_PAGE_SIZE_8KB - -config SPARC64_PAGE_SIZE_8KB - bool "8KB" - help - This lets you select the page size of the kernel. - - 8KB and 64KB work quite well, since Sparc ELF sections - provide for up to 64KB alignment. - - Therefore, 512KB and 4MB are for expert hackers only. - - If you don't know what to do, choose 8KB. - -config SPARC64_PAGE_SIZE_64KB - bool "64KB" - -config SPARC64_PAGE_SIZE_512KB - bool "512KB" - -config SPARC64_PAGE_SIZE_4MB - bool "4MB" - -endchoice +config ARCH_GENERIC_PAGE_SIZE + def_bool y config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode"
@@ -187,11 +163,11 @@ config HUGETLB_PAGE_SIZE_4MB bool "4MB" config HUGETLB_PAGE_SIZE_512K - depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB + depends on !PAGE_SIZE_4MB && !PAGE_SIZE_512KB bool "512K" config HUGETLB_PAGE_SIZE_64K - depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB + depends on !PAGE_SIZE_4MB && !PAGE_SIZE_512KB && !PAGE_SIZE_64KB bool "64K" endchoice
arch/sparc64/defconfig renamed from arch/sparc64/defconfig~sparc64 +4 -4
@@ -9,10 +9,10 @@ CONFIG_64BIT=y CONFIG_MMU=y CONFIG_TIME_INTERPOLATION=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_SPARC64_PAGE_SIZE_8KB=y -# CONFIG_SPARC64_PAGE_SIZE_64KB is not set -# CONFIG_SPARC64_PAGE_SIZE_512KB is not set -# CONFIG_SPARC64_PAGE_SIZE_4MB is not set +CONFIG_PAGE_SIZE_8KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_512KB is not set +# CONFIG_PAGE_SIZE_4MB is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y
arch/sparc64/mm/tsb.c renamed from arch/sparc64/mm/tsb.c~sparc64 +4 -4
@@ -90,16 +90,16 @@ void flush_tsb_user(struct mmu_gather *mspin_unlock_irqrestore (&mm->context.lock, flags); } -#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB ) +#if defined(CONFIG_PAGE_SIZE_8KB )#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_8K#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_8K -#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB ) +#elif defined(CONFIG_PAGE_SIZE_64KB )#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_64K#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_64K -#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB ) +#elif defined(CONFIG_PAGE_SIZE_512KB )#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_512K#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_512K -#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB ) +#elif defined(CONFIG_PAGE_SIZE_4MB )#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_4MB#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_4MB#else
mm/Kconfig renamed from mm/Kconfig~sparc64 +6 -2
@@ -6,9 +6,11 @@ choice prompt "Kernel Page Size" depends on ARCH_GENERIC_PAGE_SIZE + default PAGE_SIZE_8KB if SPARC64 default PAGE_SIZE_16KB if IA64 config PAGE_SIZE_4KB bool "4KB" + depends on !SPARC64 help This lets you select the page size of the kernel. For best 64-bit performance, a page size of larger than 4k is recommended. For best
@@ -24,17 +26,19 @@ config PAGE_SIZE_4KB Otherwise, choose 4KB. config PAGE_SIZE_8KB bool "8KB" - depends on IA64 + depends on IA64 || SPARC64 config PAGE_SIZE_16KB bool "16KB" depends on IA64 config PAGE_SIZE_64KB bool "64KB" - depends on (IA64 && !ITANIUM) + depends on (IA64 && !ITANIUM) || SPARC64 config PAGE_SIZE_512KB bool "512KB" + depends on SPARC64 config PAGE_SIZE_4MB bool "4MB" + depends on SPARC64 endchoice config PAGE_SHIFT
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 4/7 mips generic PAGE_SIZE
In reply to Dave HansenThis is the mips portion to convert it over to the generic PAGE_SIZE framework.
* remove mips-specific Kconfig menu
* add mips default of 4k pages to mm/Kconfig
* replace mips Kconfig menu with plain bool variables to preserve dependencies on specific CPUs. Add to mm/Kconfig
---
threadalloc-dave/include/asm-mips/page.h | 23 ---------------- threadalloc-dave/arch/mips/Kconfig | 43 +++++-------------------------- threadalloc-dave/mm/Kconfig | 7 ++--- 3 files changed, 13 insertions(+), 60 deletions(-)
include/asm-mips/page.h renamed from include/asm-mips/page.h~mips +1 -22
@@ -9,6 +9,7 @@#ifndef _ASM_PAGE_H#define _ASM_PAGE_H +#include <asm-generic/page.h> #ifdef __KERNEL__
@@ -16,25 +17,6 @@#endif -/* -* PAGE_SHIFT determines the page size -*/ -#ifdef CONFIG_PAGE_SIZE_4KB -#define PAGE_SHIFT 12 -#endif -#ifdef CONFIG_PAGE_SIZE_8KB -#define PAGE_SHIFT 13 -#endif -#ifdef CONFIG_PAGE_SIZE_16KB -#define PAGE_SHIFT 14 -#endif -#ifdef CONFIG_PAGE_SIZE_64KB -#define PAGE_SHIFT 16 -#endif -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) - -#ifdef __KERNEL__#ifndef __ASSEMBLY__
@@ -130,9 +112,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) -#define __pa (x) ((unsigned long) (x) - PAGE_OFFSET)#define __va (x) ((void *)((unsigned long) (x) + PAGE_OFFSET))
arch/mips/Kconfig renamed from arch/mips/Kconfig~mips +8 -35
55 lines not on this page · raw message
mm/Kconfig renamed from mm/Kconfig~mips +4 -3
@@ -6,6 +6,7 @@ choice prompt "Kernel Page Size" depends on ARCH_GENERIC_PAGE_SIZE + default PAGE_SIZE_4KB if MIPS default PAGE_SIZE_8KB if SPARC64 default PAGE_SIZE_16KB if IA64 config PAGE_SIZE_4KB
@@ -26,13 +27,13 @@ config PAGE_SIZE_4KB Otherwise, choose 4KB. config PAGE_SIZE_8KB bool "8KB" - depends on IA64 || SPARC64 + depends on IA64 || SPARC64 || MIPS_PAGE_SIZE_8KB config PAGE_SIZE_16KB bool "16KB" - depends on IA64 + depends on IA64 || MIPS_PAGE_SIZE_16KB config PAGE_SIZE_64KB bool "64KB" - depends on (IA64 && !ITANIUM) || SPARC64 + depends on (IA64 && !ITANIUM) || SPARC64 || MIPS_PAGE_SIZE_64KB config PAGE_SIZE_512KB bool "512KB" depends on SPARC64
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 5/7 parisc generic PAGE_SIZE
In reply to Dave HansenThis is the parisc portion to convert it over to the generic PAGE_SIZE framework.
* remove parisc-specific Kconfig menu
* add parisc default of 4k pages to mm/Kconfig
* replace parisc Kconfig menu with plain bool Kconfig option to cover both 16KB and 64KB pages: PARISC_LARGER_PAGE_SIZES. This preserves the dependencies on PA8X00.
---
threadalloc-dave/include/asm-parisc/pgtable.h | 8 +++--- threadalloc-dave/include/asm-parisc/page.h | 25 --------------------- threadalloc-dave/arch/parisc/Kconfig | 30 +++----------------------- threadalloc-dave/arch/parisc/defconfig | 6 ++--- threadalloc-dave/arch/parisc/mm/init.c | 2 - threadalloc-dave/mm/Kconfig | 7 +++--- 6 files changed, 17 insertions(+), 61 deletions(-)
include/asm-parisc/pgtable.h renamed from include/asm-parisc/pgtable.h~parisc +4 -4
@@ -66,7 +66,7 @@#endif #define KERNEL_INITIAL_SIZE (1 << KERNEL_INITIAL_ORDER) -#if defined(CONFIG_64BIT ) && defined(CONFIG_PARISC_PAGE_SIZE_4KB ) +#if defined(CONFIG_64BIT ) && defined(CONFIG_PAGE_SIZE_4KB )#define PT_NLEVELS 3#define PGD_ORDER 1/* Number of pages per pgd */ #define PMD_ORDER 1/* Number of pages per pmd */
@@ -514,11 +514,11 @@ static inline void ptep_set_wrprotect(st#define _PAGE_SIZE_ENCODING_16M 6#define _PAGE_SIZE_ENCODING_64M 7 -#if defined(CONFIG_PARISC_PAGE_SIZE_4KB ) +#if defined(CONFIG_PAGE_SIZE_4KB )# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_4K -#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB ) +#elif defined(CONFIG_PAGE_SIZE_16KB )# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_16K -#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB ) +#elif defined(CONFIG_PAGE_SIZE_64KB )# define _PAGE_SIZE_ENCODING_DEFAULT _PAGE_SIZE_ENCODING_64K#endif
include/asm-parisc/page.h renamed from include/asm-parisc/page.h~parisc +1 -24
@@ -1,29 +1,10 @@#ifndef _PARISC_PAGE_H#define _PARISC_PAGE_H -#if !defined(__KERNEL__) -/* this is for userspace applications (4k page size) */ -# define PAGE_SHIFT 12/* 4k */ -# define PAGE_SIZE (1UL << PAGE_SHIFT) -# define PAGE_MASK (~(PAGE_SIZE-1)) -#endif - +#include <asm-generic/page.h> #ifdef __KERNEL__ -#if defined(CONFIG_PARISC_PAGE_SIZE_4KB ) -# define PAGE_SHIFT 12/* 4k */ -#elif defined(CONFIG_PARISC_PAGE_SIZE_16KB ) -# define PAGE_SHIFT 14/* 16k */ -#elif defined(CONFIG_PARISC_PAGE_SIZE_64KB ) -# define PAGE_SHIFT 16/* 64k */ -#else -# error "unknown default kernel page size" -#endif -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifndef __ASSEMBLY__#include <asm/types.h>
@@ -140,10 +121,6 @@ extern int npmem_ranges;#define PMD_ENTRY_SIZE (1UL << BITS_PER_PMD_ENTRY)#define PTE_ENTRY_SIZE (1UL << BITS_PER_PTE_ENTRY) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -#define LINUX_GATEWAY_SPACE 0/* This governs the relationship between virtual and physical addresses.
arch/parisc/Kconfig renamed from arch/parisc/Kconfig~parisc +4 -26
@@ -142,34 +142,12 @@ config 64BIT enable this option otherwise. The 64bit kernel is significantly bigger and slower than the 32bit one. -choice - prompt "Kernel page size" - default PARISC_PAGE_SIZE_4KB if !64BIT - default PARISC_PAGE_SIZE_4KB if 64BIT -# default PARISC_PAGE_SIZE_16KB if 64BIT - -config PARISC_PAGE_SIZE_4KB - bool "4KB" - help - This lets you select the page size of the kernel. For best - performance, a page size of 16KB is recommended. For best - compatibility with 32bit applications, a page size of 4KB should be - selected (the vast majority of 32bit binaries work perfectly fine - with a larger page size). - - 4KB For best 32bit compatibility - 16KB For best performance - 64KB For best performance, might give more overhead. - - If you don't know what to do, choose 4KB. - -config PARISC_PAGE_SIZE_16KB - bool "16KB (EXPERIMENTAL)" +config PARISC_LARGER_PAGE_SIZES + def_bool y depends on PA8X00 && EXPERIMENTAL -config PARISC_PAGE_SIZE_64KB - bool "64KB (EXPERIMENTAL)" - depends on PA8X00 && EXPERIMENTAL +config ARCH_GENERIC_PAGE_SIZE + def_bool y endchoice
arch/parisc/defconfig renamed from arch/parisc/defconfig~parisc +3 -3
@@ -91,9 +91,9 @@ CONFIG_PA7100LC=y # CONFIG_PA7300LC is not set # CONFIG_PA8X00 is not set CONFIG_PA11=y -CONFIG_PARISC_PAGE_SIZE_4KB=y -# CONFIG_PARISC_PAGE_SIZE_16KB is not set -# CONFIG_PARISC_PAGE_SIZE_64KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set # CONFIG_SMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_PREEMPT_NONE is not set
arch/parisc/mm/init.c renamed from arch/parisc/mm/init.c~parisc +1 -1
@@ -642,7 +642,7 @@ static void __init map_pages(unsigned lo* Map the fault vector writable so we can * write the HPMC checksum. */ -#if defined(CONFIG_PARISC_PAGE_SIZE_4KB ) +#if defined(CONFIG_PAGE_SIZE_4KB )if (address >= ro_start && address < ro_end && address != fv_addr && address != gw_addr)
mm/Kconfig renamed from mm/Kconfig~parisc +4 -3
@@ -6,7 +6,7 @@ choice prompt "Kernel Page Size" depends on ARCH_GENERIC_PAGE_SIZE - default PAGE_SIZE_4KB if MIPS + default PAGE_SIZE_4KB if MIPS || PARISC default PAGE_SIZE_8KB if SPARC64 default PAGE_SIZE_16KB if IA64 config PAGE_SIZE_4KB
@@ -30,10 +30,11 @@ config PAGE_SIZE_8KB depends on IA64 || SPARC64 || MIPS_PAGE_SIZE_8KB config PAGE_SIZE_16KB bool "16KB" - depends on IA64 || MIPS_PAGE_SIZE_16KB + depends on IA64 || MIPS_PAGE_SIZE_16KB || PARISC_LARGER_PAGE_SIZES config PAGE_SIZE_64KB bool "64KB" - depends on (IA64 && !ITANIUM) || SPARC64 || MIPS_PAGE_SIZE_64KB + depends on (IA64 && !ITANIUM) || SPARC64 || MIPS_PAGE_SIZE_64KB || \ + PARISC_LARGER_PAGE_SIZES config PAGE_SIZE_512KB bool "512KB" depends on SPARC64
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 6/7 powerpc generic PAGE_SIZE
In reply to Dave HansenThis is the powerpc portion to convert it over to the generic PAGE_SIZE framework.
* add powerpc default of 64k pages to mm/Kconfig, when the 64k option is enabled. Defaults to 4k otherwise.
---
threadalloc-dave/include/asm-powerpc/page.h | 34 ++-------------------------- threadalloc-dave/include/asm-ppc/page.h | 22 ------------------ threadalloc-dave/arch/powerpc/Kconfig | 5 +++- threadalloc-dave/arch/powerpc/boot/page.h | 22 ------------------ threadalloc-dave/mm/Kconfig | 2 - 5 files changed, 10 insertions(+), 75 deletions(-)
include/asm-powerpc/page.h renamed from include/asm-powerpc/page.h~powerpc +3 -31
@@ -10,32 +10,14 @@* 2 of the License, or (at your option) any later version. */ +#include <asm-generic/page.h> +#ifdef __KERNEL__#include <asm/asm-compat.h> #include <asm/kdump.h> -/* -* On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software -* page size. When using 64K pages however, whether we are really supporting -* 64K pages in HW or not is irrelevant to those definitions. -*/ -#ifdef CONFIG_PPC_64K_PAGES -#define PAGE_SHIFT 16 -#else -#define PAGE_SHIFT 12 -#endif - -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) -/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */ -#define __HAVE_ARCH_GATE_AREA 1 - -/* -* Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we -* assign PAGE_MASK to a larger type it gets extended the way we want -* (i.e. with 1s in the high bits) -*/ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#define __HAVE_ARCH_GATE_AREA 1/* * KERNELBASE is the virtual address of the start of the kernel, it's often
@@ -89,16 +71,6 @@#include <asm/page_32.h> #endif -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN (addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) _ALIGN(addr, PAGE_SIZE) -/* * Don't compare things with KERNELBASE or PAGE_OFFSET to test for * "kernelness", use is_kernel_addr() - it should do what you want.
include/asm-ppc/page.h renamed from include/asm-ppc/page.h~powerpc +1 -21
@@ -2,16 +2,7 @@#define _PPC_PAGE_H#include <asm/asm-compat.h> - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) - -/* -* Subtle: this is an int (not an unsigned long) and so it -* gets extended to 64 bits the way want (i.e. with 1s). -- paulus -*/ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#include <asm-generic/page.h> #ifdef __KERNEL__
@@ -36,17 +27,6 @@ typedef unsigned long pte_basic_t;#define PTE_FMT "%.8lx"#endif -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN (addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) _ALIGN(addr, PAGE_SIZE) - -#undef STRICT_MM_TYPECHECKS#ifdef STRICT_MM_TYPECHECKS
arch/powerpc/Kconfig renamed from arch/powerpc/Kconfig~powerpc +4 -1
@@ -725,8 +725,11 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG +config ARCH_GENERIC_PAGE_SIZE + def_bool y + config PPC_64K_PAGES - bool "64k page size" + bool "enable 64k page size" depends on PPC64 help This option changes the kernel logical page size to 64k. On machines
arch/powerpc/boot/page.h renamed from arch/powerpc/boot/page.h~powerpc +1 -21
@@ -9,26 +9,6 @@* 2 of the License, or (at your option) any later version. */ -#ifdef __ASSEMBLY__ -#define ASM_CONST (x) x -#else -#define __ASM_CONST (x) x##UL -#define ASM_CONST (x) __ASM_CONST(x) -#endif - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN (addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) _ALIGN(addr, PAGE_SIZE) +#include <asm-generic/page.h> #endif /* _PPC_BOOT_PAGE_H */
mm/Kconfig renamed from mm/Kconfig~powerpc +1 -1
@@ -48,7 +48,7 @@ config PAGE_SHIFT depends on ARCH_GENERIC_PAGE_SIZE default "13" if PAGE_SIZE_8KB default "14" if PAGE_SIZE_16KB - default "16" if PAGE_SIZE_64KB + default "16" if PAGE_SIZE_64KB || PPC_64K_PAGES default "19" if PAGE_SIZE_512KB default "22" if PAGE_SIZE_4MB default "12"
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
RFC PATCH 7/7 convert the "easy" architectures to generic PAGE_SIZE
In reply to Dave HansenThis makes all of the rest of the architectures use the generic PAGE_SIZE infrastructure. These should be the easy ones that basically don't allow the user to configure the page size at all.
Note that, as promised, this removes ARCH_GENERIC_PAGE_SIZE introduced by the first patch in this series. It is no longer needed as _all_ architectures now use this infrastructure.
---
threadalloc-dave/include/asm-generic/page.h | 4 ++-- threadalloc-dave/include/asm-alpha/page.h | 9 +-------- threadalloc-dave/include/asm-arm/page.h | 9 +-------- threadalloc-dave/include/asm-arm26/page.h | 7 +------ threadalloc-dave/include/asm-cris/page.h | 13 +------------ threadalloc-dave/include/asm-frv/mem-layout.h | 15 ++------------- threadalloc-dave/include/asm-frv/page.h | 4 +--- threadalloc-dave/include/asm-h8300/page.h | 11 +---------- threadalloc-dave/include/asm-i386/page.h | 8 +------- threadalloc-dave/include/asm-m68k/page.h | 20 +------------------- threadalloc-dave/include/asm-m68knommu/page.h | 10 +--------- threadalloc-dave/include/asm-s390/page.h | 8 +------- threadalloc-dave/include/asm-sh/page.h | 10 +--------- threadalloc-dave/include/asm-sh64/page.h | 12 +----------- threadalloc-dave/include/asm-sparc/page.h | 16 +--------------- threadalloc-dave/include/asm-um/page.h | 9 +-------- threadalloc-dave/include/asm-v850/page.h | 12 +----------- threadalloc-dave/include/asm-x86_64/page.h | 12 +----------- threadalloc-dave/include/asm-xtensa/page.h | 11 +---------- threadalloc-dave/arch/ia64/Kconfig | 3 --- threadalloc-dave/arch/mips/Kconfig | 3 --- threadalloc-dave/arch/parisc/Kconfig | 3 --- threadalloc-dave/arch/powerpc/Kconfig | 3 --- threadalloc-dave/arch/sparc64/Kconfig | 3 --- threadalloc-dave/mm/Kconfig | 23 +++++++++++++---------- 25 files changed, 34 insertions(+), 204 deletions(-)
include/asm-generic/page.h renamed from include/asm-generic/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +2 -2
@@ -5,7 +5,6 @@#ifdef __KERNEL__ -#ifdef CONFIG_ARCH_GENERIC_PAGE_SIZE #ifdef __ASSEMBLY__#define ASM_CONST (x) x#else
@@ -32,8 +31,8 @@* (i.e. with 1s in the high bits) */ #define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) -#endif /* CONFIG_ARCH_GENERIC_PAGE_SIZE */ +#ifndef __ASSEMBLY__/* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size) {
@@ -47,6 +46,7 @@ static __inline__ __attribute_const__ in } while (size);return order; } +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */
include/asm-alpha/page.h renamed from include/asm-alpha/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -8
@@ -2,11 +2,7 @@#define _ALPHA_PAGE_H#include <asm/pal.h> - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 13 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> #ifdef __KERNEL__
@@ -78,9 +74,6 @@ typedef unsigned long pgprot_t;#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#define __pa (x) ((unsigned long) (x) - PAGE_OFFSET)#define __va (x) ((void *)((unsigned long) (x) + PAGE_OFFSET))#ifndef CONFIG_DISCONTIGMEM
include/asm-arm/page.h renamed from include/asm-arm/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -8
@@ -10,17 +10,10 @@#ifndef _ASMARM_PAGE_H#define _ASMARM_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> #ifdef __KERNEL__ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#ifndef __ASSEMBLY__#ifndef CONFIG_MMU
include/asm-arm26/page.h renamed from include/asm-arm26/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -6
@@ -1,6 +1,7 @@#ifndef _ASMARM_PAGE_H#define _ASMARM_PAGE_H +#include <asm-generic/page.h> #ifdef __KERNEL__#ifndef __ASSEMBLY__
@@ -79,12 +80,6 @@ typedef unsigned long pgprot_t;#define EXEC_PAGESIZE 32768 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#ifdef __KERNEL__#ifndef __ASSEMBLY__
include/asm-cris/page.h renamed from include/asm-cris/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -12
@@ -1,17 +1,9 @@#ifndef _CRIS_PAGE_H#define _CRIS_PAGE_H +#include <asm-generic/page.h> #include <asm/arch/page.h> -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 13 -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1)) -#ifdef __KERNEL__#define clear_page (page) memset((void *)(page), 0, PAGE_SIZE)
@@ -63,9 +55,6 @@ typedef struct { unsigned long pgprot; }#define page_to_phys (page) __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#ifndef __ASSEMBLY__#endif /* __ASSEMBLY__ */
include/asm-frv/mem-layout.h renamed from include/asm-frv/mem-layout.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +2 -13
@@ -12,25 +12,14 @@#ifndef _ASM_MEM_LAYOUT_H#define _ASM_MEM_LAYOUT_H +#include <asm-generic/page.h> +#ifndef __ASSEMBLY__#define __UL (X ) ((unsigned long) (X))#else #define __UL (X ) (X)#endif -/* -* PAGE_SHIFT determines the page size -*/ -#define PAGE_SHIFT 14 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif - -#define PAGE_MASK (~(PAGE_SIZE-1)) -/*****************************************************************************/ /* * virtual memory layout from kernel's point of view
include/asm-frv/page.h renamed from include/asm-frv/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -3
@@ -3,6 +3,7 @@#ifdef __KERNEL__ +#include <asm-generic/page.h> #include <asm/virtconvert.h> #include <asm/mem-layout.h> #include <asm/sections.h>
@@ -41,9 +42,6 @@ typedef struct { unsigned long pgprot; }#define __pgprot (x) ((pgprot_t) { (x) } )#define PTE_MASK PAGE_MASK -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) -#define devmem_is_allowed (pfn) 1#define __pa (vaddr) virt_to_phys((void *) (unsigned long) (vaddr))
include/asm-h8300/page.h renamed from include/asm-h8300/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -10
@@ -1,16 +1,10 @@#ifndef _H8300_PAGE_H#define _H8300_PAGE_H - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#ifdef __KERNEL__#include <asm/setup.h> +#include <asm-generic/page.h> #ifndef __ASSEMBLY__
@@ -44,9 +38,6 @@ typedef struct { unsigned long pgprot; }#define __pgd (x) ((pgd_t) { (x) } )#define __pgprot (x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -extern unsigned long memory_start;extern unsigned long memory_end;
include/asm-i386/page.h renamed from include/asm-i386/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -7
@@ -1,10 +1,7 @@#ifndef _I386_PAGE_H#define _I386_PAGE_H -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> #define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1))#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT)
@@ -78,9 +75,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* * This handles the memory map.. We could make this a config * option, but too many people screw it up, and too few need
include/asm-m68k/page.h renamed from include/asm-m68k/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -19
@@ -1,22 +1,7 @@#ifndef _M68K_PAGE_H#define _M68K_PAGE_H - -/* PAGE_SHIFT determines the page size */ -#ifndef CONFIG_SUN3 -#define PAGE_SHIFT (12) -#else -#define PAGE_SHIFT (13) -#endif -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#ifdef __KERNEL__ - +#include <asm-generic/page.h> #include <asm/setup.h> #if PAGE_SHIFT <13
@@ -103,9 +88,6 @@ typedef struct { unsigned long pgprot; }#define __pgd (x) ((pgd_t) { (x) } )#define __pgprot (x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#endif /* !__ASSEMBLY__ */ #include <asm/page_offset.h>
include/asm-m68knommu/page.h renamed from include/asm-m68knommu/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -9
@@ -1,12 +1,7 @@#ifndef _M68KNOMMU_PAGE_H#define _M68KNOMMU_PAGE_H - -/* PAGE_SHIFT determines the page size */ - -#define PAGE_SHIFT (12) -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> #ifdef __KERNEL__
@@ -44,9 +39,6 @@ typedef struct { unsigned long pgprot; }#define __pgd (x) ((pgd_t) { (x) } )#define __pgprot (x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -extern unsigned long memory_start;extern unsigned long memory_end;
include/asm-s390/page.h renamed from include/asm-s390/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -7
@@ -10,11 +10,8 @@#define _S390_PAGE_H#include <asm/types.h> +#include <asm-generic/page.h> -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1))#define PAGE_DEFAULT_ACC 0#define PAGE_DEFAULT_KEY (PAGE_DEFAULT_ACC << 4)
@@ -174,9 +171,6 @@ page_get_storage_key(unsigned long addr)#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#define __PAGE_OFFSET 0x0UL#define PAGE_OFFSET 0x0UL#define __pa (x) (unsigned long)(x)
include/asm-sh/page.h renamed from include/asm-sh/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -9
@@ -13,12 +13,7 @@[ P4 control ] 0xE0000000 */ - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PTE_MASK PAGE_MASK +#include <asm-generic/page.h> #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K )#define HPAGE_SHIFT 16
@@ -79,9 +74,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* * IF YOU CHANGE THIS, PLEASE ALSO CHANGE *
include/asm-sh64/page.h renamed from include/asm-sh64/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -11
@@ -17,15 +17,8 @@* */ +#include <asm-generic/page.h> -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE 4096 -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1))#define PTE_MASK PAGE_MASK#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K )
@@ -85,9 +78,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* * Kconfig defined. */
include/asm-sparc/page.h renamed from include/asm-sparc/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -15
@@ -8,18 +8,7 @@#ifndef _SPARC_PAGE_H#define _SPARC_PAGE_H -#ifdef CONFIG_SUN4 -#define PAGE_SHIFT 13 -#else -#define PAGE_SHIFT 12 -#endif -#ifndef __ASSEMBLY__ -/* I have my suspicions... -DaveM */ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> #ifdef __KERNEL__
@@ -137,9 +126,6 @@ BTFIXUPDEF_SETHI(sparc_unmapped_base)#endif /* !(__ASSEMBLY__) */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -#define PAGE_OFFSET 0xf0000000#ifndef __ASSEMBLY__extern unsigned long phys_base;
include/asm-um/page.h renamed from include/asm-um/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -8
@@ -10,11 +10,7 @@struct page ;#include <asm/vm-flags.h> - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) +#include <asm-generic/page.h> /* * These are used to make use of C type-checking..
@@ -85,9 +81,6 @@ typedef struct { unsigned long pgprot; }#define __pgd (x) ((pgd_t) { (x) } )#define __pgprot (x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -extern unsigned long uml_physmem;#define PAGE_OFFSET (uml_physmem)
include/asm-v850/page.h renamed from include/asm-v850/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -11
@@ -15,12 +15,7 @@#define __V850_PAGE_H__#include <asm/machdep.h> - - -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - +#include <asm-generic/page.h> /* * PAGE_OFFSET -- the first address of the first page of memory. For archs with
@@ -93,11 +88,6 @@ typedef unsigned long pgprot_t;#endif /* !__ASSEMBLY__ */ - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - -/* No current v850 processor has virtual memory. */ #define __virt_to_phys (addr) (addr)#define __phys_to_virt (addr) (addr)
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -11
@@ -1,15 +1,8 @@#ifndef _X86_64_PAGE_H#define _X86_64_PAGE_H +#include <asm-generic/page.h> -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (0x1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1))#define PHYSICAL_PAGE_MASK (~(PAGE_SIZE-1) & __PHYSICAL_MASK)#define THREAD_ORDER 1
@@ -88,9 +81,6 @@ typedef struct { unsigned long pgprot; }#define __PAGE_OFFSET 0xffff810000000000#endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) -/* See Documentation/x86_64/mm.txt for a description of the memory map. */ #define __PHYSICAL_MASK_SHIFT 46#define __PHYSICAL_MASK ((1UL << __PHYSICAL_MASK_SHIFT) - 1)
include/asm-xtensa/page.h renamed from include/asm-xtensa/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1 -10
@@ -14,16 +14,7 @@#ifdef __KERNEL__#include <asm/processor.h> - -/* -* PAGE_SHIFT determines the page size -* PAGE_ALIGN(x) aligns the pointer to the (next) page boundary -*/ - -#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE -#define PAGE_SIZE (1 << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) +#include <asm-generic/page.h> #define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS)#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
arch/ia64/Kconfig renamed from arch/ia64/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0 -3
@@ -149,9 +149,6 @@ config MCKINLEY endchoice -config ARCH_GENERIC_PAGE_SIZE - def_bool y - choice prompt "Page Table Levels" default PGTABLE_3
arch/mips/Kconfig renamed from arch/mips/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0 -3
@@ -1444,9 +1444,6 @@ config MIPS_PAGE_SIZE_64KB def_bool y depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX -config ARCH_GENERIC_PAGE_SIZE - def_bool y - config BOARD_SCACHE bool
arch/parisc/Kconfig renamed from arch/parisc/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0 -3
@@ -146,9 +146,6 @@ config PARISC_LARGER_PAGE_SIZES def_bool y depends on PA8X00 && EXPERIMENTAL -config ARCH_GENERIC_PAGE_SIZE - def_bool y - endchoice config SMP
arch/powerpc/Kconfig renamed from arch/powerpc/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0 -3
@@ -725,9 +725,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -config ARCH_GENERIC_PAGE_SIZE - def_bool y - config PPC_64K_PAGES bool "enable 64k page size" depends on PPC64
arch/sparc64/Kconfig renamed from arch/sparc64/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0 -3
@@ -34,9 +34,6 @@ config ARCH_MAY_HAVE_PC_FDC bool default y -config ARCH_GENERIC_PAGE_SIZE - def_bool y - config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS
mm/Kconfig renamed from mm/Kconfig~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +13 -10
@@ -1,11 +1,6 @@ -# -# On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software -# page size. When using 64K pages however, whether we are really supporting -# 64K pages in HW or not is irrelevant to those definitions. -# choice prompt "Kernel Page Size" - depends on ARCH_GENERIC_PAGE_SIZE + depends on MIPS || PARISC || SPARC64 || PARISC default PAGE_SIZE_4KB if MIPS || PARISC default PAGE_SIZE_8KB if SPARC64 default PAGE_SIZE_16KB if IA64
@@ -43,15 +38,23 @@ config PAGE_SIZE_4MB depends on SPARC64 endchoice +# +# Note that sparc and m68k vary their page sizes based +# on the SUN3/4 options, so they are not explicitly listed +# +# On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software +# page size. When using 64K pages however, whether we are really supporting +# 64K pages in HW or not is irrelevant to those definitions. +# config PAGE_SHIFT int - depends on ARCH_GENERIC_PAGE_SIZE - default "13" if PAGE_SIZE_8KB - default "14" if PAGE_SIZE_16KB + default "13" if PAGE_SIZE_8KB || ALPHA || CRIS || SUN3 || SUN4 + default "14" if PAGE_SIZE_16KB || FRV default "16" if PAGE_SIZE_64KB || PPC_64K_PAGES default "19" if PAGE_SIZE_512KB default "22" if PAGE_SIZE_4MB - default "12" + default "12" # arm(26) || h8300 || i386 || m68knommu || m32r || ppc(32) + # s390 || sh/64 || um || v850 || xtensa || x86_64 config SELECT_MEMORY_MODEL def_bool y
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 3 lines · Dave Hansen
diff -puN
include/asm-generic/page.h~generic-PAGE_SIZE-infrastructureinclude/asm-generic/page.hinclude/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +0
-0
[snip]
include/asm-generic/page.h static __inline__ __attribute_const__ in · line 50
Quoted 10 lines
+ */
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +2
-0+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#endif /* CONFIG_ARCH_GENERIC_PAGE_SIZE */ /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size)@@ -20,7 +48,6 @@ static __inline__ __attribute_const__ inreturn order; }
You've not handled the case for platforms that have their own get_order().
include/asm-ia64/page.h line 13
Quoted 12 lines · Dave Hansen
diff -puN
include/asm-ia64/page.h~ia64include/asm-ia64/page.hinclude/asm-ia64/page.h renamed from include/asm-ia64/page.h~ia64 +1
-1@@ -7,7 +7,7 @@* David Mosberger-Tang <[email protected]> */ - +#include <asm-generic/page.h> #include <asm/intrinsics.h> #include <asm/types.h>
Which will break here..
Quoted 11 lines · Dave Hansen
diff -puN
include/asm-ppc/page.h~powerpcinclude/asm-ppc/page.hinclude/asm-ppc/page.h renamed from include/asm-ppc/page.h~powerpc +0
-4@@ -2,16 +2,7 @@#define _PPC_PAGE_H#include <asm/asm-compat.h> - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT)
include/asm-ppc/page.h line 8
Quoted 10 lines
include/asm-ppc/page.h renamed from include/asm-ppc/page.h~powerpc +1
-6- -/* -* Subtle: this is an int (not an unsigned long) and so it -* gets extended to 64 bits the way want (i.e. with 1s). -- paulus -*/ -#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#include <asm-generic/page.h> #ifdef __KERNEL__
here..
Quoted 11 lines · Dave Hansen
diff -puN
include/asm-xtensa/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFTinclude/asm-xtensa/page.hinclude/asm-xtensa/page.h renamed from include/asm-xtensa/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +0
-4@@ -14,16 +14,7 @@#ifdef __KERNEL__#include <asm/processor.h> - -/* -* PAGE_SHIFT determines the page size -* PAGE_ALIGN(x) aligns the pointer to the (next) page boundary
include/asm-xtensa/page.h line 20
Quoted 10 lines
include/asm-xtensa/page.h renamed from include/asm-xtensa/page.h~arch-generic-PAGE_SIZE-give-every-arch-PAGE_SHIFT +1
-6-*/ - -#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE -#define PAGE_SIZE (1 << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) -#define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) +#include <asm-generic/page.h> #define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS)#define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR
and here.
You may wish to consider the HAVE_ARCH_GET_ORDER patch I sent to linux-arch, it was intended to handle this.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 5 lines · On Tue, 29 Aug 2006 11:46:18 +0900 Paul Mundt wrote:
and here.
You may wish to consider the
HAVE_ARCH_GET_ORDERpatch I sent to linux-arch, it was intended to handle this.
Is Linus taking that kind of config stuff now? He said it "must DIE," so why take any more of it?
---
~Randy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 7 lines · Randy.Dunlap
Quoted 2 lines · On Tue, 29 Aug 2006 11:46:18 +0900 Paul Mundt wrote:
You may wish to consider the
HAVE_ARCH_GET_ORDERpatch I sent to linux-arch, it was intended to handle this.Is Linus taking that kind of config stuff now? He said it "must DIE," so why take any more of it?
The alternative is shoving the PAGE_SIZE definitions in a new header, which is even uglier.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 10 lines · On Tue, 29 Aug 2006 12:55:29 +0900 Paul Mundt wrote:
Quoted 7 lines · Randy.Dunlap
Quoted 2 lines · On Tue, 29 Aug 2006 11:46:18 +0900 Paul Mundt wrote:
You may wish to consider the
HAVE_ARCH_GET_ORDERpatch I sent to linux-arch, it was intended to handle this.Is Linus taking that kind of config stuff now? He said it "must DIE," so why take any more of it?
The alternative is shoving the
PAGE_SIZEdefinitions in a new header, which is even uglier.
That seems to match what he wanted to see (AFAICT), but I agree with you.
---
~Randy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 17 lines · Paul Mundt
Quoted 3 lines · Dave Hansen
diff -puN
include/asm-generic/page.h~generic-PAGE_SIZE-infrastructureinclude/asm-generic/page.hinclude/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +0
-0[snip]
include/asm-generic/page.h static __inline__ __attribute_const__ in · line 50
Quoted 10 lines
+ */
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +2
-0+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#endif /* CONFIG_ARCH_GENERIC_PAGE_SIZE */ /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size)@@ -20,7 +48,6 @@ static __inline__ __attribute_const__ inreturn order; }You've not handled the case for platforms that have their own
get_order()
...
Quoted 2 lines
You may wish to consider the
HAVE_ARCH_GET_ORDERpatch I sent to linux-arch, it was intended to handle this.
Gah. I managed to leave that one off of the end of my series. However, I don't think this is a case where HAVE_ARCH_GET_ORDER is too much of a disease.
Linus requested these:
Quoted 8 lines
Quoted 8 lines
/* * We have a very complex xyzzy, we don't even want to * inline it! */ extern void xyxxy(...); /* Tell the rest of the world that we do it! */ #define xyzzy xyzzy
And I find them really hard to follow. But, maybe those were just done badly. Here's the patch that I have for now. I'll go back and try to Linusify it. ;)
I think get_order() is going to have to move out of generic/page.h, though.
-- Dave
include/asm-generic/page.h renamed from include/asm-generic/page.h~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitions +2 -0
@@ -33,6 +33,7 @@#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) #ifndef __ASSEMBLY__ +#ifndef CONFIG_ARCH_HAVE_GET_ORDER /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size) {
@@ -46,6 +47,7 @@ static __inline__ __attribute_const__ in } while (size);return order; } +#endif /* CONFIG_ARCH_HAVE_GET_ORDER */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */
mm/Kconfig renamed from mm/Kconfig~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitions +4 -0
@@ -56,6 +56,10 @@ config PAGE_SHIFT default "12" # arm(26) || h8300 || i386 || m68knommu || m32r || ppc(32) # s390 || sh/64 || um || v850 || xtensa || x86_64 +config ARCH_HAVE_GET_ORDER + def_bool y + depends on IA64 || PPC || XTENSA + config SELECT_MEMORY_MODEL def_bool y depends on EXPERIMENTAL || ARCH_SELECT_MEMORY_MODEL
_
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 79 lines · On Tue, 29 Aug 2006 08:29:14 -0700 Dave Hansen wrote:
Quoted 17 lines · Paul Mundt
Quoted 3 lines · Dave Hansen
diff -puN
include/asm-generic/page.h~generic-PAGE_SIZE-infrastructureinclude/asm-generic/page.hinclude/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +0
-0[snip]
include/asm-generic/page.h static __inline__ __attribute_const__ in · line 50
Quoted 10 lines
+ */
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +2
-0+#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) +#endif /* CONFIG_ARCH_GENERIC_PAGE_SIZE */ /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size)@@ -20,7 +48,6 @@ static __inline__ __attribute_const__ inreturn order; }You've not handled the case for platforms that have their own
get_order()...
Quoted 2 lines
You may wish to consider the
HAVE_ARCH_GET_ORDERpatch I sent to linux-arch, it was intended to handle this.Gah. I managed to leave that one off of the end of my series. However, I don't think this is a case where
HAVE_ARCH_GET_ORDERis too much of a disease.Linus requested these:
Quoted 8 lines
Quoted 8 lines
/* * We have a very complex xyzzy, we don't even want to * inline it! */ extern void xyxxy(...); /* Tell the rest of the world that we do it! */ #define xyzzy xyzzyAnd I find them really hard to follow. But, maybe those were just done badly. Here's the patch that I have for now. I'll go back and try to Linusify it. ;)
I think
get_order()is going to have to move out ofgeneric/page.h, though.-- Dave
diff -puN
include/asm-generic/page.h~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitionsinclude/asm-generic/page.hinclude/asm-generic/page.h renamed from include/asm-generic/page.h~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitions +2
-0@@ -33,6 +33,7 @@#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1)) #ifndef __ASSEMBLY__ +#ifndef CONFIG_ARCH_HAVE_GET_ORDER /* Pure 2^n version of get_order */ static __inline__ __attribute_const__ int get_order(unsigned long size) {@@ -46,6 +47,7 @@ static __inline__ __attribute_const__ in } while (size);return order; } +#endif /* CONFIG_ARCH_HAVE_GET_ORDER */ #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff -puN
mm/Kconfig~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitionsmm/Kconfigmm/Kconfig renamed from mm/Kconfig~Re-_RFC_PATCH_unify_all_architecture_PAGE_SIZE_definitions +4
-0@@ -56,6 +56,10 @@ config PAGE_SHIFT default "12" # arm(26) || h8300 || i386 || m68knommu || m32r || ppc(32) # s390 || sh/64 || um || v850 || xtensa || x86_64 +config ARCH_HAVE_GET_ORDER + def_bool y + depends on IA64 || PPC || XTENSA + config SELECT_MEMORY_MODEL def_bool y depends on EXPERIMENTAL || ARCH_SELECT_MEMORY_MODEL
Quoted 1 line
_
fwiw, I believe that the HAVE_ARCH* or ARCH_HAS* thingies are (hidden) config options/flags. But they are not as hidden as burying them in include/linux/*.h files.
I posted 9 (iirc) patches to convert <disease> to Kconfig variables, but hch nacked them. He apparently wants to see Linus's solution. :( I looked into using that and it was too ugly for me.
---
~Randy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
include/asm-generic/page.h line 24
Quoted 6 lines · Dave Hansen
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +6
-0+/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN (addr,size) _ALIGN_UP(addr,size)
Note that there is a generic ALIGN macro in include/linux/kernel.h plus __ALIGNs in linux/linkage.h. Could you use that and get to some sane conventin for all these ALIGN functions?
mm/Kconfig line 5
Quoted 5 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +5
-0+# +# On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software +# page size. When using 64K pages however, whether we are really supporting +# 64K pages in HW or not is irrelevant to those definitions. +#
I guess this is an oversight. This has nothing to do with generic and does not belong into mm/Kconfig
Quoted 8 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +8
-0+choice + prompt "Kernel Page Size" + depends on ARCH_GENERIC_PAGE_SIZE +config PAGE_SIZE_4KB + bool "4KB" + help + This lets you select the page size of the kernel. For best 64-bit + performance, a page size of larger than 4k is recommended. For best
mm/Kconfig line 23
Quoted 10 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +10
-0+ 32-bit compatibility on 64-bit architectures, a page size of 4KB + should be selected (although most binaries work perfectly fine with + a larger page size). + + 4KB For best 32-bit compatibility + 8KB and up For best performance + above 64k For kernel hackers only + + If you don't know what to do, choose 8KB (if available). + Otherwise, choose 4KB.
The above also would need to be genericized.
mm/Kconfig line 34
Quoted 11 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +11
-0+config PAGE_SIZE_8KB + bool "8KB" +config PAGE_SIZE_16KB + bool "16KB" +config PAGE_SIZE_64KB + bool "64KB" +config PAGE_SIZE_512KB + bool "512KB" +config PAGE_SIZE_4MB + bool "4MB" +endchoice
But not all arches support this. Choices need to be restricted to what the arch supports. What about support for other pagesizes in the future. IA64 could f.e. support 128k and 256K pages sizes.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 11 lines · Christoph Lameter
include/asm-generic/page.h line 24
Quoted 6 lines · Dave Hansen
include/asm-generic/page.h renamed from include/asm-generic/page.h~generic-PAGE_SIZE-infrastructure +6
-0+/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP (addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN (addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN (addr,size) _ALIGN_UP(addr,size)Note that there is a generic ALIGN macro in
include/linux/kernel.hplus__ALIGNsinlinux/linkage.h. Could you use that and get to some sane conventin for all these ALIGN functions?
Sure. I'll take a look.
Quoted 8 lines
mm/Kconfig line 5
Quoted 5 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +5
-0+# +# On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software +# page size. When using 64K pages however, whether we are really supporting +# 64K pages in HW or not is irrelevant to those definitions. +#I guess this is an oversight. This has nothing to do with generic and does not belong into mm/Kconfig
Yeah, this is gunk. I'll put it back where it belongs.
Quoted 12 lines
Quoted 12 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +12
-0+choice + prompt "Kernel Page Size" + depends on ARCH_GENERIC_PAGE_SIZE +config PAGE_SIZE_4KB + bool "4KB" + help + This lets you select the page size of the kernel. For best 64-bit + performance, a page size of larger than 4k is recommended. For best + 32-bit compatibility on 64-bit architectures, a page size of 4KB + should be selected (although most binaries work perfectly fine with + a larger page size). +
Quoted 8 lines
mm/Kconfig line 23
Quoted 6 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +6
-0+ 4KB For best 32-bit compatibility + 8KB and up For best performance + above 64k For kernel hackers only + + If you don't know what to do, choose 8KB (if available). + Otherwise, choose 4KB.The above also would need to be genericized.
That is genericized. ;) Are there some bits that don't fit ia64 well?
Quoted 7 lines
Quoted 7 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +7
-0+config PAGE_SIZE_8KB + bool "8KB" +config PAGE_SIZE_16KB + bool "16KB" +config PAGE_SIZE_64KB + bool "64KB" +config PAGE_SIZE_512KB
Quoted 8 lines
mm/Kconfig line 34
Quoted 4 lines
mm/Kconfig renamed from mm/Kconfig~generic-PAGE_SIZE-infrastructure +4
-0+ bool "512KB" +config PAGE_SIZE_4MB + bool "4MB" +endchoiceBut not all arches support this. Choices need to be restricted to what the arch supports. What about support for other pagesizes in the future. IA64 could f.e. support 128k and 256K pages sizes.
Take a look a few patches further down in the series. Let me know if this isn't resolved.
-- Dave
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 14 lines
Quoted 14 lines
Quoted 3 lines
Quoted 1 line
Quoted 1 line
"Dave" == Dave Hansen <[email protected]> writes:
+choice > + prompt "Kernel Page Size" > + depends on
ARCH_GENERIC_PAGE_SIZE> +configPAGE_SIZE_4KB> + bool "4KB" > + help > + This lets you select the page size of the kernel. For best 64-bit > + performance, a page size of larger than 4k is recommended. For best > + 32-bit compatibility on 64-bit architectures, a page size of 4KB > + should be selected (although most binaries work perfectly fine with > + a larger page size). >
+ > + 4KB For best 32-bit compatibility > + 8KB and up For best performance > + above 64k For kernel hackers only > + > + If you don't know what to do, choose 8KB (if available). > + Otherwise, choose 4KB.
Quoted 1 line
Quoted 1 line
The above also would need to be genericized.
Dave> That is genericized. ;) Are there some bits that don't fit ia64 Dave> well?
IA64 wants 16k standard, 64k for better performance. So something that says `choose 8k if you can' doesn't really fit. And it'd be *really* nice to test larger pages --- I see ~5% improvement in streaming I/O to a suitable RAID array with 64k as opposed to 16k pages.
(The full range of hardware-supported page sizes for Itanium 2 is:
4K, 8K, 16K, 64K, 256K, 1M, 4M, 16M, 64M, 256M, 1G, 4G and for Itanium 1 is:
4k, 16k, 64k, 256k, 1M, 4M, 16M, 64M, 256M)
--
Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au
http://www.ertos.nicta.com.au ERTOS within National ICT Australia
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 5 lines · Peter Chubb
IA64 wants 16k standard, 64k for better performance. So something that says `choose 8k if you can' doesn't really fit. And it'd be *really* nice to test larger pages --- I see ~5% improvement in streaming I/O to a suitable RAID array with 64k as opposed to 16k pages.
I've updated the help text a bit. I'd appreciate if you could take a look at the latest series, which I'll post shortly.
-- Dave
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 3 lines · Christoph Lameter
Note that there is a generic ALIGN macro in
include/linux/kernel.hplus__ALIGNsinlinux/linkage.h. Could you use that and get to some sane conventin for all these ALIGN functions?
The one in kernel.h should certainly be consolidated. What would you think about a linux/macros.h that had things like ARRAY_SIZE and the ALIGN macros, but didn't have any outside dependencies? How about a linux/align.h just for the alignment macros?
-- Dave
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 9 lines · Dave Hansen
Quoted 3 lines · Christoph Lameter
Note that there is a generic ALIGN macro in
include/linux/kernel.hplus__ALIGNsinlinux/linkage.h. Could you use that and get to some sane conventin for all these ALIGN functions?The one in
kernel.hshould certainly be consolidated. What would you think about alinux/macros.hthat had things likeARRAY_SIZEand the ALIGN macros, but didn't have any outside dependencies? How about alinux/align.hjust for the alignment macros?
linux/align.h sounds best. macros.h would lead to the accumulation of random macros.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>