Skip to contentSkip to conversation

Fix to remove flickering.

PATCH New Freddy Spierenburg 1 participant 1 message Sep 12, 2006

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Fix to remove flickering.

Hi Antonino,

Currently a lot of flickering is seen on the VGA and LCD port when one starts a DBAu1100 board, with 'CONFIG_PRINTK=y'.

This patch removes the flickering and as a result all kernel messages come by in a nice steady fashion.

Please apply.

Signature · 4 lines
$ cat ~/.signature
Freddy Spierenburg <[email protected]>  http://freddy.snarl.nl/
GnuPG: 0x7941D1E1=C948 5851 26D2 FA5C 39F1  E588 6F17 FD5D 7941 D1E1
$ # Please read http://www.ietf.org/rfc/rfc2015.txt before complain!
drivers/video/au1100fb.h +1 -1
diff -Naur linux-2.6.17.13-orig/drivers/video/au1100fb.h linux-2.6.17.13/drivers/video/au1100fb.h
@@ -274,7 +274,7 @@
 		.bpp = 16,
 		.control_base =	0x0004886A |
 			LCD_CONTROL_DEFAULT_PO | LCD_CONTROL_DEFAULT_SBPPF |
-			LCD_CONTROL_BPP_16,
+			LCD_CONTROL_BPP_16 | LCD_CONTROL_SBB_4,
 		.clkcontrol_base = 0x00020000,
 		.horztiming = 0x005aff1f,
 		.verttiming = 0x16000e57,