Kernel 2.6.18-rc7 Debian
Hey,
Ill compiling my own kernel. i´ve downloaded the archive and unpacked the archive.
This is my directory:
rwxrwsr-x 5 root src 4096 Sep 14 11:35 .
drwxr-xr-x 12 root root 4096 Jul 19 14:08 ..
drwxr-sr-x 2 root src 4096 Sep 14 11:54 kernel-patches
lrwxrwxrwx 1 root src 16 Sep 14 11:03 linux -> linux-2.6.18-rc7
drwxr-xr-x 19 root root 4096 Sep 14 11:36 linux-2.6.18-rc7
-rw-r--r-- 1 root root 52467944 Sep 14 09:22 linux-2.6.18-rc7.tar.gz
Ok,
#make menuconfug
success
Next i will create my debian-package and will include the new patch.
# make-kpkg kernel_image --revision=jan-1.0 --append_to_version jan-1.0 --added-patches=patch-2.6.18-rc7
The Error: debian/ruleset/misc/patches.mk:104: *** Could not find patch for patch-2.6.18-rc7. Stop.
My patch is under /usr/src/kernel-patches/patch-2.6.18-rc7.
If i run the process without --added-patches, then i become this error:
====== making target configure-indep [new prereqs: stamp-configure-indep]====== ====== making target stamp-configure [new prereqs: configure-arch configure-indep]====== Problems ecountered with the version number jan-1.0.
The upstream version jan does not contain a digit
Please re-read the README file and try again.
exit 2
make: *** [sanity_check] Error 2
Ich habe read the README and man pages again, but i cannt locate my mistake.
I hope everyone can help me.
So long
Jan
Quoted 9 lines · On Thursday September 14th 2006 at 12:11 Jan Dinger wrote:
[mostly Debian specific]
Ill compiling my own kernel. i?ve downloaded the archive and unpacked the archive.
...
#make menuconfug
success
In general please do not compile the kernel (or anything else) as root, but under a normal user account. If you, or some scripts, make a mistake it will be rather costly! Strictly speaking it is not an error, and will work, but it is a rather dangerous practice.
Under Debian you normally run the "make-kpkg" script with the help of the "fakeroot" package:
$ fakeroot make-kpkg ...
Only the final install of the generated .deb package needs you to become root or use "sudo".
Quoted 4 lines
Next i will create my debian-package and will include the new patch.
# make-kpkg kernel_image --revision=jan-1.0 --append_to_version jan-1.0 --added-patches=patch-2.6.18-rc7
Specifying a revision can indeed be very handy. Do note however that the revision here has to have a dot (.) but normally absolutely _not_ a dash (-) in it as you unfortunately did. This will most often lead to problems!
No need for the "--added-patches=" here. You seem to have downloaded linux-2.6.18-rc7.tar.gz which is a complete version by itself, no need for additional patches here. If you regularly want or have to try different kernel versions please check http://www.kernelnewbies.org/FAQ
on information on how to use patches, or try "git", http://git.or.cz . There are Debian packages for git in 'etch' and for 'sarge' on
http://backports.org.
Quoted 2 lines
The Error:
debian/ruleset/misc/patches.mk:104: *** Could not find patch for patch-2.6.18-rc7. Stop.
Ok, it could not find the patches. That's because of the superfluous "--added-patches" in this case.
Quoted 10 lines
My patch is under
/usr/src/kernel-patches/patch-2.6.18-rc7.If i run the process without --added-patches, then i become this error:
====== making target configure-indep [new prereqs:
stamp-configure-indep]======
====== making target stamp-configure [new prereqs: configure-arch configure-indep]======
Problems ecountered with the version number jan-1.0. The upstream version jan does not contain a digit
This is because of the dash (-) in the version number.
Quoted 3 lines
Please re-read the README file and try again.
exit 2
make: *** [sanity_check] Error 2
After any error and indeed after succesfully making your .deb package, please use the 'clean' target before trying again or building a new package as the README and the man page for make-kpkg could have told you! ;-)
$ fakeroot make-kpkg clean
Quoted 2 lines
Ich habe read the README and man pages again, but i cannt locate my mistake.
So please try, optionally as user 'jan' or something and first using chown -R jan:jan /usr/src/linux. There is also no need to have this under /usr/src. You can also have the kernel source files somewhere under your home directory.
$ fakeroot make-kpkg clean $ make oldconfig $ fakeroot make-kpkg --revision jan.1 kernel_image
and it will probably just work.
Signature · 1 line
Marco Roeland
Very nice, special thanks for super-help :) Ill test it as soon as possible!
So long
Jan
Quoted 95 lines · Marco Roeland
Quoted 11 lines · On Thursday September 14th 2006 at 12:11 Jan Dinger wrote:
[mostly Debian specific]
Ill compiling my own kernel. i?ve downloaded the archive and unpacked the archive.
...
#make menuconfug
successIn general please do not compile the kernel (or anything else) as root, but under a normal user account. If you, or some scripts, make a mistake it will be rather costly! Strictly speaking it is not an error, and will work, but it is a rather dangerous practice.
Under Debian you normally run the "make-kpkg" script with the help of the "fakeroot" package:
$ fakeroot make-kpkg ...Only the final install of the generated .deb package needs you to become root or use "sudo".
Quoted 5 lines
Next i will create my debian-package and will include the new patch.
# make-kpkg kernel_image --revision=jan-1.0 --append_to_version jan-1.0 --added-patches=patch-2.6.18-rc7Specifying a revision can indeed be very handy. Do note however that the revision here has to have a dot (.) but normally absolutely _not_ a dash (-) in it as you unfortunately did. This will most often lead to problems!
No need for the "--added-patches=" here. You seem to have downloaded linux-2.6.18-rc7.tar.gz which is a complete version by itself, no need for additional patches here. If you regularly want or have to try different kernel versions please check http://www.kernelnewbies.org/FAQ
on information on how to use patches, or try "git", http://git.or.cz . There are Debian packages for git in 'etch' and for 'sarge' on
http://backports.org.Quoted 2 lines
The Error:
debian/ruleset/misc/patches.mk:104: *** Could not find patch for patch-2.6.18-rc7. Stop.Ok, it could not find the patches. That's because of the superfluous "--added-patches" in this case.
Quoted 9 lines
My patch is under
/usr/src/kernel-patches/patch-2.6.18-rc7.If i run the process without --added-patches, then i become this error:
====== making target configure-indep [new prereqs: stamp-configure-indep]====== ====== making target stamp-configure [new prereqs: configure-arch configure-indep]====== Problems ecountered with the version number jan-1.0.
The upstream version jan does not contain a digitThis is because of the dash (-) in the version number.
Quoted 4 lines
Please re-read the README file and try again.
exit 2
make: *** [sanity_check] Error 2After any error and indeed after succesfully making your .deb package, please use the 'clean' target before trying again or building a new package as the README and the man page for make-kpkg could have told you! ;-)
$ fakeroot make-kpkg cleanQuoted 2 lines
Ich habe read the README and man pages again, but i cannt locate my mistake.
So please try, optionally as user 'jan' or something and first using chown -R jan:jan
/usr/src/linux. There is also no need to have this under/usr/src. You can also have the kernel source files somewhere under your home directory.$ fakeroot make-kpkg clean $ make oldconfig $ fakeroot make-kpkg --revision jan.1 kernel_imageand it will probably just work.