Skip to contentSkip to conversation

Block information: Changing from GB to GiB

DISCUSSION Nico Schottelius 2 participants 2 messages Sep 20, 2006

lore
Share & tools
lore
#0 lore raw

Hello!

Would you accept patches, which
a) add printing MiB, GiB, ... ADDITIONALy to MB, GB, ..
b) replace GB with GiB
?

If so, I would check the kernel source for occurences of those units and replace the calculation.

Imho, it would be nicer to print GiB only, because it's the more accurate unit (today).

You can have a look at GiB and co. at wikipedia, if you are not familar with it: http://en.wikipedia.org/wiki/Gigabyte

Sincerly

Nico

P.S.: Please CC me on reply.

Signature · 2 lines
``...if there's one thing about Linux users, they're do-ers, not whiners.''
(A quotation of Andy Patrizio I completely agree with)
#1 lore raw
Quoted 13 lines · Nico Schottelius

Hello!

Would you accept patches, which
a) add printing MiB, GiB, ... ADDITIONALy to MB, GB, ..
b) replace GB with GiB
?

If so, I would check the kernel source for occurences of those units and replace the calculation.

Imho, it would be nicer to print GiB only, because it's the more accurate unit (today).

Quoted 9 lines

You can have a look at GiB and co. at wikipedia, if you are not familar with it: http://en.wikipedia.org/wiki/Gigabyte

Sincerly

Nico

P.S.: Please CC me on reply.

This is not trivial. Much Linux code assumes that k = 1024. It's easy to use and conversions simply use shifts. If you use the newer standards, where k = 1000, then you may have to divide by decimal numbers which takes more time and might even be incorrect unless all the intermediate steps are carried out, retaining any overflow.

I suggest that you just leave the legacy enumeration alone. It doesn't hurt anything and kernel strings are for programmers who know what 'k' means (even without the new 'i'). You can look at the Wikipedia history and see the hassle caused amongst those writing the entry. My advice is to stay well clear of the politics where nobody wins. If somebody were to take my code that shifted-off an integer, leaving the 'k' part and printed it, and replaced it with integer/1000, I would take a fit -- and rightly so.

Cheers,
Dick Johnson
Penguin : Linux version 2.6.16.24 on an i686 machine (5592.66 BogoMips). New book: http://www.AbominableFirebug.com/
_


****************************************************************
The information transmitted in this message is confidential and may be privileged. Any review, retransmission, dissemination, or other use of this information by persons or entities other than the intended recipient is prohibited. If you are not the intended recipient, please notify Analogic Corporation immediately - by replying to this message or by sending an email to [email protected] - and destroy all copies of this information, including any attachments, without reading or disclosing them.

Thank you.