Skip to contentSkip to conversation

modules.isapnpmap vs modules.alias

DISCUSSION iSteve 3 participants 5 messages Sep 20, 2006 – Sep 21, 2006

lore
Share & tools
lore

iSteve

author
#0 lore raw

Greetings,
I'm looking at the modules.isapnpmap and I compare it with modules.alias file. For example:

-modules.isapnpmap:
snd-mpu401 0xffff 0xffff 0x00000000 0xd041 0x06b0
-EOF

-modules.alias:
alias: pnp:dPNPb006*
-EOF

I am trying to resolve the isapnpmap into the alias. I figured most of it, but I'm confused by the "PNP" part. It is obvious that vendor 0xd041 conforms to "PNP", as all devices that have vendor 0xd041 have PNP and vice versa, similarly for eg. vendor 0xa865 and "YMH"...

However, how can I actually translate "PNP" to "0xd041" (and/or backwards)?

Thanks in advance for any reply.
Please, CC me, as I am not subscribed to the mailing list.

Signature · 1 line
 -- iSteve
#1 lore raw
Quoted 12 lines · On Wed, 20 Sep 2006 18:53:01 +0200 iSteve wrote:

Greetings,
I'm looking at the modules.isapnpmap and I compare it with modules.alias file. For example:

-modules.isapnpmap:
snd-mpu401 0xffff 0xffff 0x00000000 0xd041 0x06b0

(quoted diff) +0 -2
-EOF
 
-modules.alias:

alias: pnp:dPNPb006*
-EOF

Quoted 6 lines

I am trying to resolve the isapnpmap into the alias. I figured most of it, but I'm confused by the "PNP" part. It is obvious that vendor 0xd041 conforms to "PNP", as all devices that have vendor 0xd041 have PNP and vice versa, similarly for eg. vendor 0xa865 and "YMH"...

However, how can I actually translate "PNP" to "0xd041" (and/or backwards)?

It's defined in the MS ISA PNP spec from
http://www.microsoft.com/whdc/resources/respec/specs/pnpisa.mspx

I just went thru the bit fiddling exercise, so holler if you want/need help with it. (I'd rather just teach you how to fish instead of giving you fish.)

Quoted 2 lines

Thanks in advance for any reply.
Please, CC me, as I am not subscribed to the mailing list.

---
~Randy

author
#2 lore raw

Re: modules.isapnpmap vs modules.alias (now: modules.usbmap vs alias)

Quoted 6 lines · On Wed, 20 Sep 2006 10:22:48 -0700 "Randy.Dunlap" <[email protected]> wrote:

It's defined in the MS ISA PNP spec from
http://www.microsoft.com/whdc/resources/respec/specs/pnpisa.mspx

I just went thru the bit fiddling exercise, so holler if you want/need help with it. (I'd rather just teach you how to fish instead of giving you fish.)

Mhm, thanks, I've got it... (also, I've found the fish itself;)

I've got one more question, this time regarding modules.usbmap.

-modules.usbmap:
ibmcam 0x000f 0x0545 0x8080 0x0002 0x0002 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8080 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8080 0x0301 0x0301 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8002 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x800c 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x800d 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 -EOF

-With corresponding aliases:
alias usb:v0545p8080d0002dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8080d030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8080d0301dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8002d030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p800Cd030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p800Dd030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam -EOF

I absolutely do not understand the d030[10-9], where fields bcdDevice_lo and bcdDevice_hi are 0x030a...

Looking at drivers/usb/core/usb.c, it'd seem that the MODALIAS sent upon device event doesn't have anything like this -- it would have "[...]d030A[...]". So I wonder, how it got generated?

-The relevant items in ibmcam.c:

static struct usb_device_id id_table[] = {
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) },
        { }
};

-EOF

-And the resulting alias part of modinfo:
alias: usb:v0545p8080d0002dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8080d030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8080d0301dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8002d030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p800Cd030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p800Dd030[10-9]dc*dsc*dp*ic*isc*ip* -EOF

Thanks in advance for any pointers

Signature · 1 line
 -- iSteve
#3 lore raw

broken modules.alias entries for some USB devices

Quoted 20 lines · On Thu, 21 Sep 2006 16:54:24 +0200 iSteve wrote:

I've got one more question, this time regarding modules.usbmap.

-modules.usbmap:
ibmcam 0x000f 0x0545 0x8080 0x0002 0x0002 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8080 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8080 0x0301 0x0301 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x8002 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x800c 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0 ibmcam 0x000f 0x0545 0x800d 0x030a 0x030a 0x00 0x00 0x00 0x00 0x00 0x00 0x0

(quoted diff) +0 -2
-EOF
 
-With corresponding aliases:

alias usb:v0545p8080d0002dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8080d030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8080d0301dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p8002d030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p800Cd030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam alias usb:v0545p800Dd030[10-9]dc*dsc*dp*ic*isc*ip* ibmcam -EOF

Quoted 2 lines

I absolutely do not understand the d030[10-9], where fields bcdDevice_lo and bcdDevice_hi are 0x030a...

This surely looks like a bug.

Quoted 3 lines

Looking at drivers/usb/core/usb.c, it'd seem that the MODALIAS sent upon device event doesn't have anything like this -- it would have "[...]d030A[...]". So I wonder, how it got generated?

scripts/mod/file2alias.c generates these lines from the ID tables.

Quoted 8 lines

-The relevant items in ibmcam.c:

static struct usb_device_id id_table[] = {
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) },
        { USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) },

The problem is that the bcdDevice field is supposed to be BCD - i.e., its hex representation should contain only decimal digits 0..9. Therefore a proper USB device cannot have bcdDevice == 0x030a. Apparently some ibmcam devices violate this and use the bcdDevice field as if it was binary.

Quoted 11 lines
        { }
};
(quoted diff) +0 -2
-EOF
 
-And the resulting alias part of modinfo:

alias: usb:v0545p8080d0002dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8080d030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8080d0301dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p8002d030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p800Cd030[10-9]dc*dsc*dp*ic*isc*ip*
alias: usb:v0545p800Dd030[10-9]dc*dsc*dp*ic*isc*ip*

The code in scripts/mod/file2alias.c assumes that the bcdDevice_lo and bcdDevice_hi field contain proper BCD data. Seems that, thanks to buggy hardware, this assumption is incorrect, and the code needs to support any hex numbers there.

author
#4 lore raw

Re: broken modules.alias entries for some USB devices

Quoted 10 lines · On Thu, 21 Sep 2006 22:30:35 +0400 Sergey Vlasov <[email protected]> wrote:

The problem is that the bcdDevice field is supposed to be BCD - i.e., its hex representation should contain only decimal digits 0..9. Therefore a proper USB device cannot have bcdDevice == 0x030a. Apparently some ibmcam devices violate this and use the bcdDevice field as if it was binary.

The code in scripts/mod/file2alias.c assumes that the bcdDevice_lo and bcdDevice_hi field contain proper BCD data. Seems that, thanks to buggy hardware, this assumption is incorrect, and the code needs to support any hex numbers there.

So the 'correct' alias for this device should be eg.:
usb:v0545p800Dd030Adc*dsc*dp*ic*isc*ip* right?

Given this new info... what if _lo is 0x030a and _hi is 0x030f? How would the alias look like? Or worse, what if _lo is 0x030a and _hi is 0x040a?

Would these be correct?
usb:v0545p800Dd030[A-F]dc*dsc*dp*ic*isc*ip*
usb:v0545p800Dd0[30A-40A]dc*dsc*dp*ic*isc*ip*

Thanks in advance.

Signature · 1 line
 -- iSteve