Skip to contentSkip to conversation

lilo 22.7.3 corrupts initrd with large kernel images

DISCUSSION Denis Vlasenko 1 participant 1 message Sep 24, 2006

lore
Share & tools
lore
#0 lore raw

Hello John,

It seems that lilo does something incorrectly with initrd image if kernel image is around 3MB. I found this when I built Linux 2.6.18 and it failed to mount initrd. Previously I was using 2.6.17.11_64 and earlier kernels with no problems.

I tried loading the same image and initrd from DOS with linld and it worked flawlessly. Then I loaded the image without initrd using lilo (this worked) and compared dmesg with DOS one. The obvious related difference is:

testing NMI watchdog ... OK.
-checking if image is initramfs...it isn't (no cpio magic); looks like an initrd +checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 1460k freed

Then I built smaller 2.6.18 (excluded some stuff I can boot without) and it was loaded with initrd using lilo just fine.

More details:

# lilo -V
LILO version 22.7.3
# cd /boot; ls -l */bzImage img-01.gz
-rw-r--r--  1 root root 2615417 Sep 21 21:34 2.6.17.11_64/bzImage (loads ok)
-rw-r--r--  1 root root 3024504 Sep 22 02:34 2.6.18_64/bzImage    (BAD)
-rw-r--r--  1 root root 2687906 Sep 24 15:35 2.6.18_64s/bzImage   (loads ok)
-r--r--r--  1 root root 1495860 Sep  2  2005 img-01.gz    (initrd image)

lilo.conf:

boot=/dev/hda5
lba32
compact
prompt
timeout=40
vga=ask

image=/boot/2.6.18_64/bzImage

    label=2.6.18_64
    initrd=/boot/img-01.gz
    root=/dev/hda5
    append="root=/dev/hda5 init=/bin/sh"
    vga=0

image=/boot/2.6.18_64s/bzImage

    label=2.6.18_64s
    initrd=/boot/img-01.gz
    append="root=/dev/ram init=/linuxrc ROOTMAJ=3 ROOTMIN=5 IPCFG=mac INIT=/init"
    vga=0

image=/boot/2.6.17.11_64/bzImage

    label=2.6.17.11_64
    initrd=/boot/img-01.gz
    append="root=/dev/ram init=/linuxrc ROOTMAJ=3 ROOTMIN=5 IPCFG=mac INIT=/init"
    vga=0

Attached are dmesg outputs from all three boot scenarios:
dmesg_bare - 2.6.18_64 without initrd using lilo, init=/bin/sh
dmesg_dos - 2.6.18_64 with initrd using linld, normal boot
dmesg_smaller - 2.6.18_64s with initrd using lilo, normal boot --
vda