Skip to contentSkip to conversation

megaraid question

DISCUSSION [email protected] 4 participants 6 messages Sep 25, 2006

lore
Share & tools
lore
#0 lore raw

i am using opensource megaraid driver (2.6.17) . Do you know any opensource monitoring tool for the opensource megaraid drivers Or is there a way to check the state of harddrives connected to the megaraid controller?

#1 lore raw
Quoted 4 lines · On Mon, Sep 25, 2006 at 01:29:09AM +0000, [email protected] wrote:

i am using opensource megaraid driver (2.6.17) . Do you know any opensource monitoring tool for the opensource megaraid drivers Or is there a way to check the state of harddrives connected to the megaraid controller?

I've only found MegaCLI which has the kind of interface that makes me wish I was a bricklayer (I'm looking at the SAS raid card btw).

Pick your card out from http://www.lsilogic.com/cm/DownloadSearch.do
and you should get something. No source (fooey) but at least it's something.

Wish the source was available though. I might be bothered to do something about the interface.

Signature · 3 lines
    "To the extent that we overreact, we proffer the terrorists the
    greatest tribute."
    	- High Court Judge Michael Kirby
#2 lore raw
In reply to [email protected]

Keep me in CC.

Quoted 1 line · [email protected] wrote:

i am using opensource megaraid driver (2.6.17) . Do you know any opensource monitoring tool for the opensource megaraid drivers Or is there a way to check the state of harddrives connected to the megaraid controller?

I'd like to add a "ME TOO" here. as well as one for the adaptec raid cards.

Last time I looked, the only software I could find for megaraid was a program from Dell (binary only unfortunately)

Signature · 2 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???
#3 lore raw

Am Montag, 25. September 2006 03:51 schrieb Wakko Warner:

Quoted 8 lines

Keep me in CC.

Quoted 4 lines · [email protected] wrote:

i am using opensource megaraid driver (2.6.17) . Do you know any opensource monitoring tool for the opensource megaraid drivers Or is there a way to check the state of harddrives connected to the megaraid controller?

Quoted 5 lines

I'd like to add a "ME TOO" here. as well as one for the adaptec raid cards.

Last time I looked, the only software I could find for megaraid was a program from Dell (binary only unfortunately)

Hi, thanks for answering me!

If i find something out i will let you know.
THe last info i got is that it is somehow possible with smartmon tools. (a la smartctl -d megaraid,0 /dev/sda)

I am asking smartmontools developers right now, because there is no out of the box support for megaraid.

Also i was told that there is a binary monitoring tool from lsi-logic page.

But will it work with open source driver?

Roman

#4 lore raw
Quoted 2 lines · Roman Glebov

Am Montag, 25. September 2006 03:51 schrieb Wakko Warner:

Quoted 1 line

Keep me in CC.

    ^^^^^^^^^^^^^^
Quoted 6 lines
Quoted 6 lines
Quoted 4 lines · [email protected] wrote:

i am using opensource megaraid driver (2.6.17) . Do you know any opensource monitoring tool for the opensource megaraid drivers Or is there a way to check the state of harddrives connected to the megaraid controller?

Quoted 8 lines
Quoted 5 lines

I'd like to add a "ME TOO" here. as well as one for the adaptec raid cards.

Last time I looked, the only software I could find for megaraid was a program from Dell (binary only unfortunately)

Hi, thanks for answering me!

If i find something out i will let you know.

That'd be great.

Quoted 2 lines

THe last info i got is that it is somehow possible with smartmon tools. (a la smartctl -d megaraid,0 /dev/sda)

I have never tried this.

Quoted 6 lines

I am asking smartmontools developers right now, because there is no out of the box support for megaraid.

Also i was told that there is a binary monitoring tool from lsi-logic page.

But will it work with open source driver?

I'm not sure about the program from LSI, but the one from Dell seems to work with any megaraid controller (the one I do have happens to be a dell megaraid card). The program I used from that package looks very similar to the bios configuration tool and you can change disk layouts from within the program while still in linux.

Signature · 2 lines
 Lab tests show that use of micro$oft causes cancer in lab animals
 Got Gas???
#5 lore raw
Quoted 11 lines · Wakko Warner
Quoted 4 lines · Roman Glebov

Also i was told that there is a binary monitoring tool from lsi-logic page.

But will it work with open source driver?

I'm not sure about the program from LSI, but the one from Dell seems to work with any megaraid controller (the one I do have happens to be a dell megaraid card). The program I used from that package looks very similar to the bios configuration tool and you can change disk layouts from within the program while still in linux.

The program from Dell is the same program you get from LSI. Yes, it does work with the kernel's "new generation" megaraid driver. Just make sure /dev/megadev0 is present.