fix idiocy in asd_init_lseq_mdp()
PATCH 1/1 fix idiocy in asd_init_lseq_mdp()
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
--- drivers/scsi/aic94xx/aic94xx_seq.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/scsi/aic94xx/aic94xx_seq.c +1 -1
@@ -764,7 +764,7 @@ static void asd_init_lseq_mdp(struct asdasd_write_reg_word (asd_ha,LmSEQ_FIRST_INV_SCB_SITE (lseq), (u16 )last_scb_site_no+1 );asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq), - (u16 ) LmM0INTEN_MASK &0xFFFF0000 >>16 ); + (u16) ((LmM0INTEN_MASK &0xFFFF0000 ) >>16 ));asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq) +2 , (u16 ) LmM0INTEN_MASK &0xFFFF );asd_write_reg_byte (asd_ha,LmSEQ_LINK_RST_FRM_LEN (lseq),0 );
Signature · 1 line
1.4.2.GIT
Quoted 5 lines · --- Al Viro
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
"whoever" would be Bottomley or someone at LTC.
My code in that spot has:
asd_write_reg_dword(asd_ha, LmSEQ_INTEN_SAVE(lseq),
(u32) LmM0INTEN_MASK);
Quoted 27 lines
Signed-off-by Al Viro <[email protected]>--- drivers/scsi/aic94xx/aic94xx_seq.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/scsi/aic94xx/aic94xx_seq.c +1
-1@@ -764,7 +764,7 @@ static void asd_init_lseq_mdp(struct asdasd_write_reg_word (asd_ha,LmSEQ_FIRST_INV_SCB_SITE (lseq), (u16 )last_scb_site_no+1 );asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq), - (u16 ) LmM0INTEN_MASK &0xFFFF0000 >>16 ); + (u16) ((LmM0INTEN_MASK &0xFFFF0000 ) >>16 ));asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq) +2 , (u16 ) LmM0INTEN_MASK &0xFFFF );asd_write_reg_byte (asd_ha,LmSEQ_LINK_RST_FRM_LEN (lseq),0 );Signature · 6 lines
1.4.2.GIT - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · --- Al Viro
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
"whoever" would be Bottomley or someone at LTC.
My code in that spot has:
asd_write_reg_dword(asd_ha, LmSEQ_INTEN_SAVE(lseq),
(u32) LmM0INTEN_MASK);
LubenQuoted 27 lines
Signed-off-by Al Viro <[email protected]>--- drivers/scsi/aic94xx/aic94xx_seq.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/scsi/aic94xx/aic94xx_seq.c +1
-1@@ -764,7 +764,7 @@ static void asd_init_lseq_mdp(struct asdasd_write_reg_word (asd_ha,LmSEQ_FIRST_INV_SCB_SITE (lseq), (u16 )last_scb_site_no+1 );asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq), - (u16 ) LmM0INTEN_MASK &0xFFFF0000 >>16 ); + (u16) ((LmM0INTEN_MASK &0xFFFF0000 ) >>16 ));asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq) +2 , (u16 ) LmM0INTEN_MASK &0xFFFF );asd_write_reg_byte (asd_ha,LmSEQ_LINK_RST_FRM_LEN (lseq),0 );Signature · 6 lines
1.4.2.GIT - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · Al Viro
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
Al,
On the assumption that you have hardware that uses this driver, did you notice any improvement with your patch applied?
Several of us have reported a degenerate mode, that I term as "tmf timeout", in which a aic94xx based card becomes inoperable. Alas, the same hardware running another OS does not exhibit that problem (or at least not as much).
Quoted 10 lines
Signed-off-by Al Viro <[email protected]>--- drivers/scsi/aic94xx/aic94xx_seq.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)drivers/scsi/aic94xx/aic94xx_seq.c +0
-0
drivers/scsi/aic94xx/aic94xx_seq.c static void asd_init_lseq_mdp(struct asd · line 770
Quoted 8 lines
drivers/scsi/aic94xx/aic94xx_seq.c +1
-1@@ -764,7 +764,7 @@ static void asd_init_lseq_mdp(struct asdasd_write_reg_word (asd_ha,LmSEQ_FIRST_INV_SCB_SITE (lseq), (u16 )last_scb_site_no+1 );asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq), - (u16 ) LmM0INTEN_MASK &0xFFFF0000 >>16 ); + (u16) ((LmM0INTEN_MASK &0xFFFF0000 ) >>16 ));asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq) +2 , (u16 ) LmM0INTEN_MASK &0xFFFF );asd_write_reg_byte (asd_ha,LmSEQ_LINK_RST_FRM_LEN (lseq),0 );
BTW Luben was pointing out that the call you patched and the following call can be combined into a less trouble prone asd_write_reg_dword() call.
Doug Gilbert
Quoted 5 lines
Several of us have reported a degenerate mode, that I term as "tmf timeout", in which a aic94xx based card becomes inoperable. Alas, the same hardware running another OS does not exhibit that problem (or at least not as much).
Quoted 10 lines
drivers/scsi/aic94xx/aic94xx_seq.c static void asd_init_lseq_mdp(struct asd · line 770
Quoted 6 lines
drivers/scsi/aic94xx/aic94xx_seq.c +1
-1asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq), - (u16 ) LmM0INTEN_MASK &0xFFFF0000 >>16 ); + (u16) ((LmM0INTEN_MASK &0xFFFF0000 ) >>16 ));asd_write_reg_word (asd_ha,LmSEQ_INTEN_SAVE (lseq) +2 , (u16 ) LmM0INTEN_MASK &0xFFFF );asd_write_reg_byte (asd_ha,LmSEQ_LINK_RST_FRM_LEN (lseq),0 );BTW Luben was pointing out that the call you patched and the following call can be combined into a less trouble prone
asd_write_reg_dword()call.
In that case there's another bug - we should write upper 16 bits to addr + 2, not the lower ones.
IOW, the old code was
broken attempt to write upper 16 bits to addr (ends up writing _lower_
16 bits)
writing lower 16 bits to addr + 2
With this patch we get the first call do what it clearly intended to do (unless it's a deliberate obfuscation from hell). _IF_ we really want to write the damn thing little-endian, the order should be reverted on top of that. I.e.
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq),
(u16) LmM0INTEN_MASK & 0xFFFF);
asd_write_reg_word(asd_ha, LmSEQ_INTEN_SAVE(lseq) + 2,
(u16) ((LmM0INTEN_MASK & 0xFFFF0000) >> 16));
or, indeed, asd_write_reg_dword().
Quoted 6 lines · --- Douglas Gilbert
Quoted 5 lines · Al Viro
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
[...]
Quoted 3 lines
BTW Luben was pointing out that the call you patched and the following call can be combined into a less trouble prone
asd_write_reg_dword()call.
More than that -- I looked at the history of that file/line and the code as I had written it _never_ had that broken cast and shift mess.
"Someone" changed that after I submitted the code to lkml/lsml.
Luben
Quoted 7 lines · Luben Tuikov
Quoted 6 lines · --- Douglas Gilbert
Quoted 5 lines · Al Viro
To whoever had written that code:
a) priority of >> is higher than that of &
b) priority of typecast is higher than that of any binary operator
c) learn the fscking C
Quoted 8 lines
[...]
Quoted 3 lines
BTW Luben was pointing out that the call you patched and the following call can be combined into a less trouble prone
asd_write_reg_dword()call.More than that -- I looked at the history of that file/line and the code as I had written it _never_ had that broken cast and shift mess.
Far more interesting question: where does the hardware expect to see the upper 16 bits of that 32bit value? Which one it is - LmSEQ_INTEN_SAVE(lseq) ori LmSEQ_INTEN_SAVE(lseq) + 2?
Quoted 5 lines · Al Viro
Far more interesting question: where does the hardware expect to see the
upper 16 bits of that 32bit value? Which one it is -LmSEQ_INTEN_SAVE(lseq)
oriLmSEQ_INTEN_SAVE(lseq)+ 2?
I don't honestly know. The change was made as part of a slew of changes by Robert Tarte at Adaptec to make the driver run on Big Endian platforms. I've copied Jack Hammer who's now looking after it in the hope that he can enlighten us.
James
Quoted 11 lines · James Bottomley
Quoted 5 lines · Al Viro
Far more interesting question: where does the hardware expect to see the
upper 16 bits of that 32bit value? Which one it is -LmSEQ_INTEN_SAVE(lseq)
oriLmSEQ_INTEN_SAVE(lseq)+ 2?I don't honestly know. The change was made as part of a slew of changes by Robert Tarte at Adaptec to make the driver run on Big Endian platforms. I've copied Jack Hammer who's now looking after it in the hope that he can enlighten us.
This was not Rob. I sent this bad code out in a roll up of support for non-x86 systems (and bad process for not running sparse on the patch which passed the buck onto someone else to find).
I think it might have been for an IA64 offset issue someone was seeing. I cannot find the original mail on the issue in my mail archives.
I will try and track down a IA64 system to see if we can verify this is really needed. If not we should revert back to the original dword implementation.
-andmike
--
Michael Anderson
[email protected]
Quoted 11 lines · --- James Bottomley
Quoted 5 lines · Al Viro
Far more interesting question: where does the hardware expect to see the
upper 16 bits of that 32bit value? Which one it is -LmSEQ_INTEN_SAVE(lseq)
oriLmSEQ_INTEN_SAVE(lseq)+ 2?I don't honestly know. The change was made as part of a slew of changes by Robert Tarte at Adaptec to make the driver run on Big Endian platforms. I've copied Jack Hammer who's now looking after it in the hope that he can enlighten us.
Al,
I can see that you addressed your message to me, but Bottomley has stepped in to answer. I can also see that Bottomley is looking for an answer from Jack. To save an off the list correspondence,
I'll go ahead and answer your question addressed to me.
LSEQ_INTEN_SAVE is a 32 bit Little-Endian storage, thus your original, first email on this subject is correct, and your supposition that if the storage is 32 bit LE, then my version is correct, is in itself correct.
No such "changes" (in the HW page writing area) are necessary in order to make the code run in BE platforms. My version of my code (NOT Bottomley's version of my code) has been extensively tested on BE (PowerPC) platforms, and is working properly.
The version as seen in my code:
asd_write_reg_dword(asd_ha, LmSEQ_INTEN_SAVE(lseq), (u32) LmM0INTEN_MASK);
is the correct way.
Good luck!
LubenP.S. Git tells me that I needed to change two lines only, in order to make the code run on BE platforms, the git commit dates Wednesday Sept 28, 2005. That commit is present on the GIT repo, then present on http://linux.adaptec.com/sas/.