Skip to contentSkip to conversation

Add initial support for the e300c2 core

PATCH In review Kim Phillips 1 participant 1 message Oct 3, 2006 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 6/7 Add initial support for the e300c2 core

Add support for the Freescale e300c2 core found in the MPC832x processor line.

As far as initial kernel support is concerned, the e300c2 core is identical to the e300c1 found in the mpc834x, except that it's had its floating point unit chopped off.

---
 arch/powerpc/kernel/cputable.c |   15 +++++++++++++--
 1 files changed, 13 insertions(+), 2 deletions(-)
arch/powerpc/kernel/cputable.c +13 -2
index 190a57e..47a613c 100644
@@ -763,10 +763,10 @@ #if CLASSIC_PPC
 		.cpu_setup		= __setup_cpu_603,
 		.platform		= "ppc603",
 	},
-	{	/* e300 (a 603e core, plus some) on 83xx */
+	{	/* e300c1 (a 603e core, plus some) on 83xx */
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00830000,
-		.cpu_name		= "e300",
+		.cpu_name		= "e300c1",
 		.cpu_features		= CPU_FTRS_E300,
 		.cpu_user_features	= COMMON_USER,
 		.icache_bsize		= 32,
@@ -774,6 +774,17 @@ #if CLASSIC_PPC
 		.cpu_setup		= __setup_cpu_603,
 		.platform		= "ppc603",
 	},
+	{	/* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */
+		.pvr_mask		= 0x7fff0000,
+		.pvr_value		= 0x00840000,
+		.cpu_name		= "e300c2",
+		.cpu_features		= CPU_FTRS_E300,
+		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_603,
+		.platform		= "ppc603",
+	},
 	{	/* default match, we assume split I/D cache & TB (non-601)... */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
Signature · 1 line
1.4.2.3