add support for the mpc832x mds board
Subsystems (2)
PATCH 7/7 add support for the mpc832x mds board
Add support for MPC832x MDS evaluation board.
This patch depends on the 8360+QE lib patches by Leo.
The MPC832x processors (MPC8323E, MPC8323, MPC8321E, MPC8321) sport the e300c2 core plus a QUICC Engine (QE). This patch adds support for the 832x MDS evaluation board.
The 832x MDS dts and defconfig files are pending more tests.
--- arch/powerpc/Kconfig | 2 arch/powerpc/platforms/83xx/Kconfig | 13 ++ arch/powerpc/platforms/83xx/Makefile | 1 arch/powerpc/platforms/83xx/mpc832x_mds.c | 215 +++++++++++++++++++++++++++++ arch/powerpc/platforms/83xx/mpc832x_mds.h | 19 +++ 5 files changed, 249 insertions(+), 1 deletions(-)
arch/powerpc/Kconfig +1 -1
@@ -357,7 +357,7 @@ endchoice config QUICC_ENGINE bool - depends on PPC_MPC836x + depends on PPC_MPC836x || PPC_MPC832x default y help The QUICC Engine (QE) is a new generation of communications
arch/powerpc/platforms/83xx/Kconfig +13 -0
@@ -5,6 +5,13 @@ choice prompt "Machine Type" default MPC834x_SYS +config MPC832x_MDS + bool "Freescale MPC832x MDS" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This option enables support for the MPC832x MDS evaluation board. + config MPC834x_SYS bool "Freescale MPC834x SYS" select DEFAULT_UIMAGE
@@ -34,6 +41,12 @@ config MPC8360E_PB endchoice +config PPC_MPC832x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC832x_MDS + config MPC834x bool select PPC_UDBG_16550
arch/powerpc/platforms/83xx/Makefile +1 -0
@@ -3,6 +3,7 @@ # Makefile for the PowerPC 83xx linux ke # obj-y := misc.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o
arch/powerpc/platforms/83xx/mpc832x_mds.c new file +215 -0
215 lines not on this page · raw message
arch/powerpc/platforms/83xx/mpc832x_mds.h new file +19 -0
@@ -0,0 +1,19 @@ +/* +* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. +* +* Description: +* MPC832x MDS board specific header. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +* +*/ + +#ifndef __MACH_MPC832x_MDS_H__ +#define __MACH_MPC832x_MDS_H__ + +extern u8 *get_bcsr (void ); + +#endif /* __MACH_MPC832x_MDS_H__ */
Signature · 1 line
1.4.2.3
Quoted 82 lines · Kim Phillips
Add support for MPC832x MDS evaluation board.
This patch depends on the 8360+QE lib patches by Leo.
The MPC832x processors (MPC8323E, MPC8323, MPC8321E, MPC8321) sport the e300c2 core plus a QUICC Engine (QE). This patch adds support for the 832x MDS evaluation board.
The 832x MDS dts and defconfig files are pending more tests.
Signed-off-by Kim Phillips <[email protected]>--- arch/powerpc/Kconfig | 2 arch/powerpc/platforms/83xx/Kconfig | 13 ++ arch/powerpc/platforms/83xx/Makefile | 1 arch/powerpc/platforms/83xx/mpc832x_mds.c | 215 ++++++++++++++++++ +++++++++++ arch/powerpc/platforms/83xx/mpc832x_mds.h | 19 +++ 5 files changed, 249 insertions(+), 1 deletions(-)arch/powerpc/platforms/83xx/mpc832x_mds.c new file +2
-0@@ -0,0 +1,215 @@ +/* +* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * MPC832xE MDS board specific routines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */arch/powerpc/platforms/83xx/mpc832x_mds.c new file +41
-0+ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" +#include "mpc832x_mds.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base =0 ;
arch/powerpc/platforms/83xx/mpc832x_mds.c line 62
Quoted 10 lines
arch/powerpc/platforms/83xx/mpc832x_mds.c new file +10
-0+unsigned long isa_mem_base =0 ; +#endif + +static u8 *bcsr_regs =NULL ; + +u8 *get_bcsr (void ) +{ +return bcsr_regs; +} +
Is get_bcsr() needed since you removed its use from ucc_geth? (if not, let's remove it and the header as well).
Quoted 185 lines
+/*
************************************************************************
+ *
+ * Setup the architecture
+ *
+ */arch/powerpc/platforms/83xx/mpc832x_mds.c new file +148
-0+static void __init mpc832x_sys_setup_arch (void ) +{ +struct device_node *np; + +if (ppc_md.progress) + ppc_md.progress ("mpc832x_sys_setup_arch()" ,0 ); + + np =of_find_node_by_type (NULL ,"cpu" ); +if (np !=0 ) { +unsigned int *fp = + (int *)get_property (np,"clock-frequency" ,NULL ); +if (fp !=0 ) + loops_per_jiffy = *fp /HZ ; +else + loops_per_jiffy =50000000 /HZ ; +of_node_put (np); + } + +/* Map BCSR area */ + np =of_find_node_by_name (NULL ,"bcsr" ); +if (np !=0 ) { +struct resource res; + +of_address_to_resource (np,0 , &res); + bcsr_regs =ioremap (res.start, res.end - res.start +1 ); +of_node_put (np); + } + +#ifdef CONFIG_PCI +for (np =NULL ; (np =of_find_node_by_type (np,"pci" )) !=NULL ;) +add_bridge (np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_QUICC_ENGINE +qe_reset (); + +if ((np =of_find_node_by_name (np,"par_io" )) !=NULL ) { +par_io_init (np); +of_node_put (np); + +for (np =NULL ; (np =of_find_node_by_name (np,"ucc" )) !=NULL ;) +par_io_of_config (np); + } + +if ((np =of_find_compatible_node (NULL ,"network" ,"ucc_geth" )) + !=NULL ){ +/* Reset the Ethernet PHY */ + bcsr_regs[9 ] &= ~0x20 ; +udelay (1000 ); + bcsr_regs[9 ] |=0x20 ; +iounmap (bcsr_regs); +of_node_put (np); + } + +#endif /* CONFIG_QUICC_ENGINE */ + +#ifdef CONFIG_BLK_DEV_INITRD +if (initrd_start) +ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS +ROOT_DEV = Root_NFS; +#else +ROOT_DEV = Root_HDA1; +#endif +} + +void __init mpc832x_sys_init_IRQ (void ) +{ + +struct device_node *np; + + np =of_find_node_by_type (NULL ,"ipic" ); +if (!np) +return ; + +ipic_init (np,0 ); + +/* Initialize the default interrupt mapping priorities, +* in case the boot rom changed something on us. +*/ +ipic_set_default_priority (); +of_node_put (np); + +#ifdef CONFIG_QUICC_ENGINE + np =of_find_node_by_type (NULL ,"qeic" ); +if (!np) +return ; + +qe_ic_init (np,0 ); +of_node_put (np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +#if defined(CONFIG_I2C_MPC ) && defined(CONFIG_SENSORS_DS1374 ) +extern ulong ds1374_get_rtc_time (void ); +extern int ds1374_set_rtc_time (ulong ); + +static int __init mpc832x_rtc_hookup (void ) +{ +struct timespec tv; + + ppc_md.get_rtc_time = ds1374_get_rtc_time; + ppc_md.set_rtc_time = ds1374_set_rtc_time; + + tv.tv_nsec =0 ; + tv.tv_sec = (ppc_md.get_rtc_time) (); +do_settimeofday (&tv); + +return 0 ; +} + +late_initcall (mpc832x_rtc_hookup); +#endif + +/* +* Called very early, MMU is off, device-tree isn't unflattened +*/ +static int __init mpc832x_sys_probe (void ) +{ +char *model =of_get_flat_dt_prop (of_get_flat_dt_root (), +"model" ,NULL ); + +if (model ==NULL ) +return 0 ; +if (strcmp (model,"MPC8323EMDS" )) +return 0 ; + +DBG ("%s found\n" , model); + +return 1 ; +} + +define_machine (mpc832x_mds) { + .name = "MPC832x MDS", + .probe = mpc832x_sys_probe, + .setup_arch = mpc832x_sys_setup_arch, + .init_IRQ = mpc832x_sys_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +};arch/powerpc/platforms/83xx/mpc832x_mds.h new file +2
-0@@ -0,0 +1,19 @@ +/* +* Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
+ *
+ * Description:
+ * MPC832x MDS board specific header.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */arch/powerpc/platforms/83xx/mpc832x_mds.h new file +7
-0+ +#ifndef __MACH_MPC832x_MDS_H__ +#define __MACH_MPC832x_MDS_H__ + +extern u8 *get_bcsr (void ); + +#endif /* __MACH_MPC832x_MDS_H__ */ Signature · 1 line
1.4.2.3