add TV810 board support
PATCH 1/1 add TV810 board support
Hello folks,
inlined is the patch that adds support for TV810 board which is a small deviation :) from PNX8550 platform.
arch/mips/Kconfig | 5 arch/mips/Makefile | 5 arch/mips/configs/pnx8550-stb810_defconfig | 1219 +++++++++++++++++++++++++ arch/mips/kernel/head.S | 2 arch/mips/philips/pnx8550/common/prom.c | 20 arch/mips/philips/pnx8550/stb810/Makefile | 4 arch/mips/philips/pnx8550/stb810/board_setup.c | 56 + arch/mips/philips/pnx8550/stb810/irqmap.c | 23 arch/mips/philips/pnx8550/stb810/prom_init.c | 49 + include/asm-mips/bootinfo.h | 1 10 files changed, 1369 insertions(+), 15 deletions(-)
Signed-off-by Vitaly Wool <[email protected]>
Signed-off-by Vladimir Barinov <[email protected]>
arch/mips/philips/pnx8550/stb810/Makefile new file +4 -0
@@ -0,0 +1,4 @@ + +# Makefile for the Philips STB810 Board. + +lib-y := prom_init.o board_setup.o irqmap.o
arch/mips/philips/pnx8550/stb810/board_setup.c new file +56 -0
56 lines not on this page · raw message
arch/mips/philips/pnx8550/stb810/irqmap.c new file +23 -0
@@ -0,0 +1,23 @@ +/* +* Philips STB810 board irqmap. +* +* Author: MontaVista Software, Inc. +* [email protected] +* +* Copyright 2005 MontaVista Software Inc. +* +* This program is free software; you can redistribute it and/or modify it +* under the terms of the GNU General Public License as published by the +* Free Software Foundation; either version 2 of the License, or (at your +* option) any later version. +*/ + +#include <linux/init.h> +#include <int.h> + +char irq_tab_jbs[][5 ]__initdata = { + [8 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [9 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, + [10 ] = {-1 ,PNX8550_INT_PCI_INTA ,0xff ,0xff ,0xff }, +}; +
arch/mips/philips/pnx8550/stb810/prom_init.c new file +49 -0
49 lines not on this page · raw message
include/asm-mips/bootinfo.h +1 -0
@@ -137,6 +137,7 @@#define MACH_PHILIPS_NINO 0/* Nino */ #define MACH_PHILIPS_VELO 1/* Velo */ #define MACH_PHILIPS_JBS 2/* JBS */ +#define MACH_PHILIPS_STB810 3/* STB810 */ /* * Valid machtype for group Globespan
arch/mips/philips/pnx8550/common/prom.c +6 -14
@@ -35,23 +35,15 @@ char * prom_getcmdline(void)return &(arcs_cmdline[0 ]); } -void prom_init_cmdline (void ) +void __init prom_init_cmdline (void ) { -char *cp; -int actr; - - actr =1 ;/* Always ignore argv[0] */ +int i; - cp = &(arcs_cmdline[0 ]); -while (actr < prom_argc) { -strcpy (cp, prom_argv[actr]); - cp +=strlen (prom_argv[actr]); - *cp++ =' ' ; - actr++; + arcs_cmdline[0 ] ='\0' ; +for (i =0 ; i < prom_argc; i++) { +strcat (arcs_cmdline, prom_argv[i]); +strcat (arcs_cmdline," " ); } -if (cp != &(arcs_cmdline[0 ]))/* get rid of trailing space */ - --cp; - *cp ='\0' ; }char *prom_getenv (char *envname)
arch/mips/kernel/head.S +1 -1
@@ -138,7 +138,7 @@ EXPORT(stext) # used for profiling EXPORT(_stext) -#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM) +#if defined(CONFIG_QEMU) || defined(CONFIG_MIPS_SIM) || defined(CONFIG_PNX8550_STB810) /* * Give us a fighting chance of running if execution beings at the * kernel load address. This is needed because this platform does
arch/mips/configs/pnx8550-stb810_defconfig new file +1219 -0
1,219 lines not on this page · raw message
arch/mips/Kconfig +5 -0
@@ -480,6 +480,11 @@ config PNX8550_JBS select PNX8550 select SYS_SUPPORTS_LITTLE_ENDIAN +config PNX8550_STB810 + bool "Support for Philips PNX8550 based STB810 board" + select PNX8550 + select SYS_SUPPORTS_LITTLE_ENDIAN + config DDB5477 bool "NEC DDB Vrc-5477" select DDB5XXX_COMMON
arch/mips/Makefile +5 -0
@@ -467,6 +467,11 @@ libs-$(CONFIG_PNX8550_JBS) += arch/mips/ #cflags-$(CONFIG_PNX8550_JBS) += -Iinclude/asm-mips/mach-pnx8550 load-$(CONFIG_PNX8550_JBS) += 0xffffffff80060000 +# Philips PNX8550 STB810 board +# +libs-$(CONFIG_PNX8550_STB810) += arch/mips/philips/pnx8550/stb810/ +load-$(CONFIG_PNX8550_STB810) += 0xffffffff80060000 + # NEC EMMA2RH boards # core-$(CONFIG_EMMA2RH) += arch/mips/emma2rh/common/
Vitaly Wool wrote:
[snip]
arch/mips/philips/pnx8550/stb810/board_setup.c line 37
Quoted 4 lines
arch/mips/philips/pnx8550/stb810/board_setup.c new file +4
-0+/* CP0 hazard avoidance. */ +#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t")
Didn't we just get rid of that BARRIER stuff?
Thiemo