Skip to contentSkip to conversation

Remove crept in whitespace from head*.S again.

S390 Martin Schwidefsky 1 participant 1 message Oct 4, 2006 s390

lore
Share & tools
lore
#0 lore raw

From: Heiko Carstens <[email protected]>

[S390] Remove crept in whitespace from head*.S again.

---

 arch/s390/kernel/head31.S |    8 ++++----
 arch/s390/kernel/head64.S |   12 ++++++------
 2 files changed, 10 insertions(+), 10 deletions(-)
arch/s390/kernel/head31.S +4 -4
diff -urpN linux-2.6/arch/s390/kernel/head31.S linux-2.6-patched/arch/s390/kernel/head31.S
@@ -258,10 +258,10 @@ startup_continue:
 # find out if the diag 0x9c is available
 #
 	mvc	__LC_PGM_NEW_PSW(8),.Lpcdiag9c-.LPG1(%r13)
-	stap   __LC_CPUID+4		# store cpu address
-	lh     %r1,__LC_CPUID+4
-	diag   %r1,0,0x9c		# test diag 0x9c
-	oi     2(%r12),1		# set diag9c flag
+	stap	__LC_CPUID+4		# store cpu address
+	lh	%r1,__LC_CPUID+4
+	diag	%r1,0,0x9c		# test diag 0x9c
+	oi	2(%r12),1		# set diag9c flag
 .Lchkdiag9c:
 
 	lpsw  .Lentry-.LPG1(13)		# jump to _stext in primary-space,
arch/s390/kernel/head64.S +6 -6
diff -urpN linux-2.6/arch/s390/kernel/head64.S linux-2.6-patched/arch/s390/kernel/head64.S
@@ -253,12 +253,12 @@ startup_continue:
 #
 # find out if the diag 0x9c is available
 #
-	la     %r1,0f-.LPG1(%r13)	# set program check address
-	stg    %r1,__LC_PGM_NEW_PSW+8
-	stap   __LC_CPUID+4		# store cpu address
-	lh     %r1,__LC_CPUID+4
-	diag   %r1,0,0x9c		# test diag 0x9c
-	oi     6(%r12),1		# set diag9c flag
+	la	%r1,0f-.LPG1(%r13)	# set program check address
+	stg	%r1,__LC_PGM_NEW_PSW+8
+	stap	__LC_CPUID+4		# store cpu address
+	lh	%r1,__LC_CPUID+4
+	diag	%r1,0,0x9c		# test diag 0x9c
+	oi	6(%r12),1		# set diag9c flag
 0:
 
 #