Skip to contentSkip to conversation

Add phys_efi command line option

PATCH New Horms 1 participant 2 messages Oct 6, 2006 – Oct 23, 2006

lore
Share & tools
lore

Horms

author
#0 lore raw

PATCH 5/5 Add phys_efi command line option

This patch adds a command line option, phys_efi, which forces EFI calls to stay in physical mode. This is mainly for the purpose of being able to test the physical mode code path.

I believe that it may also be needed in order to kexec between OS/hypervisors with different memory layouts, such as Linux->Xen and vice versa, which have 0xe000... and 0xf000... as their page offset respecively. However, I am still working on verifying this.

Index: kexec-ia64-2.6/arch/ia64/kernel/efi.c
=================================--- kexec-ia64-2.6.orig/arch/ia64/kernel/efi.c 2006-10-05 14:54:20.000000000 +0900
+++ kexec-ia64-2.6/arch/ia64/kernel/efi.c 2006-10-05 15:47:52.000000000 +0900
@@ -414,6 +414,7 @@
u64 efi_desc_size;
char *cp, vendor[100] = "unknown";
extern char saved_command_line[];
+ int phys_efi = 0;
int i;

/* it's too early to be able to use the standard kernel command line support... */
@@ -424,6 +425,9 @@
max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
} else if (memcmp(cp, "min_addr=", 9) = 0) {
min_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
+ } else if (memcmp(cp, "phys_efi", 8) = 0) {
+ phys_efi = 1;
+ cp+=8;
} else {
while (*cp != ' ' && *cp)
++cp;
@@ -527,7 +531,10 @@
}
#endif

- efi_enter_virtual_mode();
+ if (phys_efi)
+ printk("Forcing EFI to stay in physical mode\n");
+ else
+ efi_enter_virtual_mode();
}

void
Index: kexec-ia64-2.6/Documentation/kernel-parameters.txt
=================================--- kexec-ia64-2.6.orig/Documentation/kernel-parameters.txt 2006-10-05 15:15:17.000000000 +0900
+++ kexec-ia64-2.6/Documentation/kernel-parameters.txt 2006-10-05 15:16:58.000000000 +0900
@@ -1266,6 +1266,10 @@
pg. [PARIDE]
See Documentation/paride.txt.

+ phys_efi [IA-64] Force EFI, PAL and SAL calls to be made
+ in physical mode. Otherwise, if possible virtual mode
+ calls are made.
+
pirq= [SMP,APIC] Manual mp-table setup
See Documentation/i386/IO-APIC.txt.

--

Signature · 3 lines
Horms
  H: http://www.vergenet.net/~horms/
  W: http://www.valinux.co.jp/en/
author
#1 lore raw

PATCH 5/5 Add phys_efi command line option

This patch adds a command line option, phys_efi, which forces EFI calls to stay in physical mode. This is mainly for the purpose of being able to test the physical mode code path.

I believe that it may also be needed in order to kexec between OS/hypervisors with different memory layouts, such as Linux->Xen and vice versa, which have 0xe000... and 0xf000... as their page offset respecively. However, I am still working on verifying this.

 Documentation/kernel-parameters.txt |    4 ++++
 arch/ia64/kernel/efi.c              |    9 ++++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

Index: kexec-ia64-2.6/arch/ia64/kernel/efi.c
=================================--- kexec-ia64-2.6.orig/arch/ia64/kernel/efi.c 2006-10-20 12:58:00.000000000 +0900
+++ kexec-ia64-2.6/arch/ia64/kernel/efi.c 2006-10-20 12:58:00.000000000 +0900
@@ -414,6 +414,7 @@
u64 efi_desc_size;
char *cp, vendor[100] = "unknown";
extern char saved_command_line[];
+ int phys_efi = 0;
int i;

/* it's too early to be able to use the standard kernel command line support... */
@@ -424,6 +425,9 @@
max_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
} else if (memcmp(cp, "min_addr=", 9) = 0) {
min_addr = GRANULEROUNDDOWN(memparse(cp + 9, &cp));
+ } else if (memcmp(cp, "phys_efi", 8) = 0) {
+ phys_efi = 1;
+ cp+=8;
} else {
while (*cp != ' ' && *cp)
++cp;
@@ -527,7 +531,10 @@
}
#endif

- efi_enter_virtual_mode();
+ if (phys_efi)
+ printk("Forcing EFI to stay in physical mode\n");
+ else
+ efi_enter_virtual_mode();
}

void
Index: kexec-ia64-2.6/Documentation/kernel-parameters.txt
=================================--- kexec-ia64-2.6.orig/Documentation/kernel-parameters.txt 2006-10-20 12:57:20.000000000 +0900
+++ kexec-ia64-2.6/Documentation/kernel-parameters.txt 2006-10-20 12:58:00.000000000 +0900
@@ -1266,6 +1266,10 @@
pg. [PARIDE]
See Documentation/paride.txt.

+ phys_efi [IA-64] Force EFI, PAL and SAL calls to be made
+ in physical mode. Otherwise, if possible virtual mode
+ calls are made.
+
pirq= [SMP,APIC] Manual mp-table setup
See Documentation/i386/IO-APIC.txt.

--

Signature · 3 lines
Horms
  H: http://www.vergenet.net/~horms/
  W: http://www.valinux.co.jp/en/