Skip to contentSkip to conversation

specifying the order of calling kernel functions (or modules)

DISCUSSION Seongsu Lee 3 participants 7 messages Sep 28, 2006 – Oct 10, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

I am a beginner of kernel module programming. I want to specify the order of calling functions that I registered by EXPORT_SYMBOL(). (or modules)

Thank you for your help.

Signature · 2 lines
Seongsu Lee - http://www.senux.com/
Buck-passing usually turns out to be a boomerang.
#1 lore raw
Quoted 3 lines · Seongsu Lee

I am a beginner of kernel module programming. I want to specify the order of calling functions that I registered by EXPORT_SYMBOL(). (or modules)

What problem did you expect to solve by specifying the order? Phrased differently, why does the order matter?

#2 lore raw
Quoted 7 lines · On Thu, Sep 28, 2006 at 11:47:02AM -0400, [email protected] wrote:
Quoted 3 lines · Seongsu Lee

I am a beginner of kernel module programming. I want to specify the order of calling functions that I registered by EXPORT_SYMBOL(). (or modules)

What problem did you expect to solve by specifying the order? Phrased differently, why does the order matter?

I am playing with mtdconcat in MTD (Memory Technology Device).

For example:
mtdconcat must be called after initializing the lower device and partitions. So, the order of calling functions must be decided always.

Actuall, the functions in Linux kernel are called in a order. I want to know how to specify these orders.

Sorry for short English. Thank you for your help.

Signature · 3 lines
Seongsu Lee - http://www.senux.com/
"I don't think so," said Ren'e Descartes. Just then,
he vanished.
#3 lore raw
Quoted 16 lines · On Sat, 30 Sep 2006 19:42:05 +0900 Seongsu Lee wrote:
Quoted 7 lines · On Thu, Sep 28, 2006 at 11:47:02AM -0400, [email protected] wrote:
Quoted 3 lines · Seongsu Lee

I am a beginner of kernel module programming. I want to specify the order of calling functions that I registered by EXPORT_SYMBOL(). (or modules)

What problem did you expect to solve by specifying the order? Phrased differently, why does the order matter?

I am playing with mtdconcat in MTD (Memory Technology Device).

For example:
mtdconcat must be called after initializing the lower device and partitions. So, the order of calling functions must be decided always.

Quoted 4 lines

Actuall, the functions in Linux kernel are called in a order. I want to know how to specify these orders.

Sorry for short English. Thank you for your help.

a. linker order matters (order in Makefiles)

b. initcall order matters. See include/linux/init.h, especially this part:

/* initcalls are now grouped by functionality into separate
* subsections. Ordering inside the subsections is determined
* by link order.
* For backwards compatibility, initcall() puts the call in
* the device init subsection.
*/

#define __define_initcall(level,fn) \
	static initcall_t __initcall_##fn __attribute_used__ \
	__attribute__((__section__(".initcall" level ".init"))) = fn

#define core_initcall(fn) __define_initcall("1",fn)
#define postcore_initcall(fn) __define_initcall("2",fn)
#define arch_initcall(fn) __define_initcall("3",fn)
#define subsys_initcall(fn) __define_initcall("4",fn)
#define fs_initcall(fn) __define_initcall("5",fn)
#define device_initcall(fn) __define_initcall("6",fn)
#define late_initcall(fn) __define_initcall("7",fn)

c. "function call" order matters :)

---
~Randy

#4 lore raw

Hello,

Thank you for the replys.

I try to phrase differently.

I made a simple kernel module that do 'hello world'. The module will be called when I do 'modprobe' or 'insmod' to load it into the memory.

When is the function, init_module(), in the module called in the case the module is compiled as a built-in one? (Not M but Y in .config) Can I specify the exact time of calling the function, init_module() in the module?

Signature · 4 lines
Seongsu Lee - http://www.senux.com/
The nice thing about Windows is - It does not just
crash, it displays a dialog box and lets you press
'OK' first. (Arno Schaefer's .sig)
#5 lore raw
Quoted 6 lines · On Sat, 7 Oct 2006 23:41:39 +0900 Seongsu Lee wrote:

Hello,

Thank you for the replys.

I try to phrase differently.

Quoted 7 lines

I made a simple kernel module that do 'hello world'. The module will be called when I do 'modprobe' or 'insmod' to load it into the memory.

When is the function, init_module(), in the module called in the case the module is compiled as a built-in one? (Not M but Y in .config) Can I specify the exact time of calling the function, init_module() in the module?

That depends on the order that it is listed in the (nested) Makefiles. Which sub-directory and Makefile will you use?

---
~Randy

#6 lore raw
Quoted 11 lines · Randy Dunlap
Quoted 9 lines · On Sat, 7 Oct 2006 23:41:39 +0900 Seongsu Lee wrote:

Hello,

Thank you for the replys.

I try to phrase differently.

I made a simple kernel module that do 'hello world'. The module will be called when I do 'modprobe' or 'insmod' to load it into the memory.

Quoted 7 lines
Quoted 4 lines

When is the function, init_module(), in the module called in the case the module is compiled as a built-in one? (Not M but Y in .config) Can I specify the exact time of calling the function, init_module() in the module?

That depends on the order that it is listed in the (nested) Makefiles. Which sub-directory and Makefile will you use?

drivers/mtd/Makefile

Yes, I confirmed that the order of being called is same with the order that is listed in the Makefiles.

I think it is better to post questions of kernel newbie like this into other mailing lists instead of this, developer list.

Anyway, thank you very much for your help.

Signature · 5 lines
Seongsu Lee - http://www.senux.com/
Your job is being a professor and researcher: That's
one hell of a good excuse for some of the
brain-damages of minix. (Linus Torvalds to Andrew
Tanenbaum)