Merge window closed: v2.6.19-rc1
Subsystems (13)
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with tons of changes, and in fact since 2.6.18 took longer than normal due to me traveling (and others probably also being on vacations), it's possibly even larger than usual.
I think we got updates to pretty much all of the active architectures, we've got VM changes (dirty shared page tracking, for example), we've got networking, drivers, you name it. Even the shortlog and the diffstats are too big to make the kernel mailing list, but even just the summary says something:
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)
so please give it a good testing, and let's see if there are any regressions.
As usual, the best way to get some grip on a particular subsystem would tend to be with some script like
git log --no-merges v2.6.18.. drivers/usb | git shortlog | less -S
which gives a more manageable overview of any particular area you're interested in (in the example that would be 'drivers/usb', but you can use this to browse any interesting area).
Linus
2.6.19-rc1: known regressions
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Subject : CONFIG_M386=y rwsem compile error
References : http://lkml.org/lkml/2006/10/3/240
Submitter : Klaus Knopper <[email protected]>
Guilty : Andi Kleen <[email protected]>
commit add659bf8aa92f8b3f01a8c0220557c959507fb1
Status : unknown
Subject : Lost all PCI devices
References : http://lkml.org/lkml/2006/9/30/128
Submitter : Luca Tettamanti <[email protected]>
Guilty : Andi Kleen <[email protected]>
commit 5e544d618f0fb21011f36f28d5e3952b9dc109d2
Status : patch available (might not completely fix the problem?)
Subject : SMP x86_64 boot problem
References : http://lkml.org/lkml/2006/9/28/330
Submitter : [email protected]
Status : unknown
Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
Submitter : Thierry Vignaud <[email protected]>
Status : unknown
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Status : Jens is working on a fix
Re: 2.6.19-rc1: known regressions
Quoted 5 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
Quoted 8 lines
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Quoted 48 lines
Subject :
CONFIG_M386=yrwsem compile error
References : http://lkml.org/lkml/2006/10/3/240
Submitter : Klaus Knopper <[email protected]>
Guilty : Andi Kleen <[email protected]>commit add659bf8aa92f8b3f01a8c0220557c959507fb1Status : unknown
Subject : Lost all PCI devices
References : http://lkml.org/lkml/2006/9/30/128
Submitter : Luca Tettamanti <[email protected]>
Guilty : Andi Kleen <[email protected]>commit 5e544d618f0fb21011f36f28d5e3952b9dc109d2Handled-By Andi Kleen <[email protected]>Status : patch available (might not completely fix the problem?)
Subject : SMP
x86_64boot problem
References : http://lkml.org/lkml/2006/9/28/330
Submitter : [email protected]
Status : unknownSubject : sata-via doesn't detect anymore disks attached to VIA vt6421
References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
Submitter : Thierry Vignaud <[email protected]>
Status : unknownSubject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknownSubject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36Handled-By Jens Axboe <[email protected]>Status : Jens is working on a fix
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Re: 2.6.19-rc1: known regressions
Quoted 13 lines · Benjamin Herrenschmidt
Quoted 12 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Quoted 4 lines
Quoted 1 line
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Let me know if it appears to be ide related, there's a chance it could be the same thing as:
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Status : Jens is working on a fix
Signature · 1 line
Jens Axboe
Re: 2.6.19-rc1: known regressions
Quoted 14 lines · Jens Axboe
Quoted 13 lines · Benjamin Herrenschmidt
Quoted 12 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Let me know if it appears to be ide related, there's a chance it could be the same thing as:
No idea yet, I had various reports mostly saying "black screen", both on sleep and resume, there could be several issues. I need to finish some other stuff and I'll look into it.
Ben.
Re: 2.6.19-rc1: known regressions
In reply to Jens AxboeQuoted 10 lines · Jens Axboe
Quoted 9 lines · Benjamin Herrenschmidt
Quoted 8 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
No idea who to trim, sorry.
It is possible to setup in kconfig, an initramfs system that won't boot, giving the message as it locks up tight that there is not any initramfs cpio magic. I have it rebuilding now with the proper options turned on I hope.
Quoted 13 lines
Quoted 2 lines
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Let me know if it appears to be ide related, there's a chance it could be the same thing as:
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36Handled-By Jens Axboe <[email protected]>Status : Jens is working on a fix
Signature · 7 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
Re: 2.6.19-rc1: known regressions
In reply to Benjamin HerrenschmidtQuoted 13 lines · Benjamin Herrenschmidt
Quoted 12 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Quoted 5 lines
Quoted 1 line
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
...
Thanks, added.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.19-rc1: known regressions
In reply to Benjamin HerrenschmidtQuoted 13 lines · Benjamin Herrenschmidt
Quoted 12 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Quoted 4 lines
Quoted 1 line
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Does not even boot for me (iBook G4).
Andreas.
Signature · 4 lines
Andreas Schwab, SuSE Labs, [email protected] SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany PGP key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different."
Re: 2.6.19-rc1: known regressions
On (05/10/06 22:27), Andreas Schwab didst pronounce:
Quoted 15 lines
Quoted 13 lines · Benjamin Herrenschmidt
Quoted 12 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Due to the huge amount of recipients, please trim the Cc when answering.
Add sleep/wakeup on powerbooks apparently busted. Haven't tracked down yet.
Does not even boot for me (iBook G4).
There may be a known issue with 32 bit PPC and CONFIG_HIGHMEM. If it is the problem I think it is, there is a patch below but we haven't been able to fins a machine to confirm it fixes it.
Can you please confirm that CONFIG_HIGHMEM is set on your machine? If it is, can you unset it and see does it boot? If it boots, this patch should allow the kernel to boot with CONFIG_HIGHMEM.
Thanks
arch/i386/kernel/setup.c +6 -7
@@ -1083,16 +1083,15 @@ static unsigned long __init setup_memoryvoid __init zone_sizes_init (void ) { +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] = +virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; + max_zone_pfns[ZONE_NORMAL ] = max_low_pfn;#ifdef CONFIG_HIGHMEM -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn, - highend_pfn}; + max_zone_pfns[ZONE_HIGHMEM ] = highend_pfn;add_active_range (0 ,0 , highend_pfn);#else -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn};add_active_range (0 ,0 , max_low_pfn);#endif
arch/i386/mm/discontig.c +6 -5
@@ -357,11 +357,12 @@ void __init numa_kva_reserve(void)void __init zone_sizes_init (void ) {int nid; -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn, - highend_pfn - }; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] = +virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; + max_zone_pfns[ZONE_NORMAL ] = max_low_pfn; + max_zone_pfns[ZONE_HIGHMEM ] = highend_pfn;/* If SRAT has not registered memory, register it now */ if (find_max_pfn_with_active_regions () ==0 ) {
arch/ia64/mm/contig.c +1 -0
@@ -233,6 +233,7 @@ paging_init (void)efi_memmap_walk (count_pages, &num_physpages); max_dma =virt_to_phys ((void *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); max_zone_pfns[ZONE_DMA ] = max_dma; max_zone_pfns[ZONE_NORMAL ] = max_low_pfn;
arch/ia64/mm/discontig.c +1 -0
@@ -709,6 +709,7 @@ void __init paging_init(void) max_pfn = mem_data[node].max_pfn; } +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); max_zone_pfns[ZONE_DMA ] = max_dma; max_zone_pfns[ZONE_NORMAL ] = max_pfn;free_area_init_nodes (max_zone_pfns);
arch/powerpc/mm/mem.c +4 -3
@@ -307,11 +307,12 @@ void __init paging_init(void) top_of_ram, total_ram);printk (KERN_DEBUG "Memory hole size: %ldMB\n" , (top_of_ram - total_ram) >>20 ); +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns));#ifdef CONFIG_HIGHMEM - max_zone_pfns[0 ] = total_lowmem >>PAGE_SHIFT ; - max_zone_pfns[1 ] = top_of_ram >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_lowmem >>PAGE_SHIFT ; + max_zone_pfns[ZONE_HIGHMEM ] = top_of_ram >>PAGE_SHIFT ;#else - max_zone_pfns[0 ] = top_of_ram >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = top_of_ram >>PAGE_SHIFT ;#endif free_area_init_nodes (max_zone_pfns); }
arch/powerpc/mm/numa.c +3 -3
@@ -617,9 +617,9 @@ void __init do_init_bootmem(void)void __init paging_init (void ) { -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -lmb_end_of_DRAM () >>PAGE_SHIFT - }; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =lmb_end_of_DRAM () >>PAGE_SHIFT ;free_area_init_nodes (max_zone_pfns); }
arch/ppc/mm/init.c +4 -3
@@ -374,11 +374,12 @@ void __init paging_init(void) end_pfn = start_pfn + (total_memory >>PAGE_SHIFT );add_active_range (0 , start_pfn, end_pfn); +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns));#ifdef CONFIG_HIGHMEM - max_zone_pfns[0 ] = total_lowmem >>PAGE_SHIFT ; - max_zone_pfns[1 ] = total_memory >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_lowmem >>PAGE_SHIFT ; + max_zone_pfns[ZONE_HIGHMEM ] = total_memory >>PAGE_SHIFT ;#else - max_zone_pfns[0 ] = total_memory >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_memory >>PAGE_SHIFT ;#endif /* CONFIG_HIGHMEM */ free_area_init_nodes (max_zone_pfns); }
arch/x86_64/mm/init.c +6 -3
@@ -406,9 +406,12 @@ void __cpuinit zap_low_mappings(int cpu)#ifndef CONFIG_NUMA void __init paging_init (void ) { -unsigned long max_zone_pfns[MAX_NR_ZONES ] = {MAX_DMA_PFN , -MAX_DMA32_PFN , - end_pfn}; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =MAX_DMA_PFN ; + max_zone_pfns[ZONE_DMA32 ] =MAX_DMA32_PFN ; + max_zone_pfns[ZONE_NORMAL ] = end_pfn; +memory_present (0 ,0 , end_pfn);sparse_init ();free_area_init_nodes (max_zone_pfns);
arch/x86_64/mm/numa.c +5 -3
@@ -338,9 +338,11 @@ static void __init arch_sparse_init(voidvoid __init paging_init (void ) {int i; -unsigned long max_zone_pfns[MAX_NR_ZONES ] = {MAX_DMA_PFN , -MAX_DMA32_PFN , - end_pfn}; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =MAX_DMA_PFN ; + max_zone_pfns[ZONE_DMA32 ] =MAX_DMA32_PFN ; + max_zone_pfns[ZONE_NORMAL ] = end_pfn;arch_sparse_init ();
Signature · 4 lines
-- Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.19-rc1: known regressions
Quoted 1 line · [email protected] (Mel Gorman) writes:
Can you please confirm that
CONFIG_HIGHMEMis set on your machine?
Yes, it is.
Quoted 1 line
If it is, can you unset it and see does it boot?
I did, and it did.
Quoted 2 lines
If it boots, this patch should allow the kernel to boot with
CONFIG_HIGHMEM.
Bingo! :-)
Andreas.
Signature · 4 lines
Andreas Schwab, SuSE Labs, [email protected] SuSE Linux Products GmbH, Maxfeldstraße 5, 90409 Nürnberg, Germany PGP key fingerprint = 58CA 54C7 6D53 942B 1756 01D3 44D5 214B 8276 4ED5 "And now for something completely different."
PATCH 1/1 Use symbolic names instead of indices for zone initialisation
Hi Linus,
Arch-independent zone-sizing is using indices instead of symbolic names to offset within an array related to zones (max_zone_pfns). The unintended impact is that ZONE_DMA and ZONE_NORMAL is initialised on powerpc instead of ZONE_DMA and ZONE_HIGHMEM when CONFIG_HIGHMEM is set. As a result, the the machine fails to boot but will boot with CONFIG_HIGHMEM turned off.
The following patch properly initialises the max_zone_pfns[] array and uses symbolic names instead of indices in each architecture using arch-independent zone-sizing. Two users have successfully booted their powerpcs with it (one an ibook G4). It has also been boot tested on x86, x86_64, ppc64 and ia64. Please merge for 2.6.19-rc2.
Credit to Benjamin Herrenschmidt for identifying the bug and rolling the first fix. Additional credit to Johannes Berg and Andreas Schwab for reporting the problem and testing on powerpc.
arch/i386/kernel/setup.c +6 -7
@@ -1083,16 +1083,15 @@ static unsigned long __init setup_memoryvoid __init zone_sizes_init (void ) { +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] = +virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; + max_zone_pfns[ZONE_NORMAL ] = max_low_pfn;#ifdef CONFIG_HIGHMEM -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn, - highend_pfn}; + max_zone_pfns[ZONE_HIGHMEM ] = highend_pfn;add_active_range (0 ,0 , highend_pfn);#else -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn};add_active_range (0 ,0 , max_low_pfn);#endif
arch/i386/mm/discontig.c +6 -5
@@ -357,11 +357,12 @@ void __init numa_kva_reserve(void)void __init zone_sizes_init (void ) {int nid; -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT , - max_low_pfn, - highend_pfn - }; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] = +virt_to_phys ((char *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; + max_zone_pfns[ZONE_NORMAL ] = max_low_pfn; + max_zone_pfns[ZONE_HIGHMEM ] = highend_pfn;/* If SRAT has not registered memory, register it now */ if (find_max_pfn_with_active_regions () ==0 ) {
arch/ia64/mm/contig.c +1 -0
@@ -233,6 +233,7 @@ paging_init (void)efi_memmap_walk (count_pages, &num_physpages); max_dma =virt_to_phys ((void *)MAX_DMA_ADDRESS ) >>PAGE_SHIFT ; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); max_zone_pfns[ZONE_DMA ] = max_dma; max_zone_pfns[ZONE_NORMAL ] = max_low_pfn;
arch/ia64/mm/discontig.c +1 -0
@@ -709,6 +709,7 @@ void __init paging_init(void) max_pfn = mem_data[node].max_pfn; } +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); max_zone_pfns[ZONE_DMA ] = max_dma; max_zone_pfns[ZONE_NORMAL ] = max_pfn;free_area_init_nodes (max_zone_pfns);
arch/powerpc/mm/mem.c +4 -3
@@ -307,11 +307,12 @@ void __init paging_init(void) top_of_ram, total_ram);printk (KERN_DEBUG "Memory hole size: %ldMB\n" , (top_of_ram - total_ram) >>20 ); +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns));#ifdef CONFIG_HIGHMEM - max_zone_pfns[0 ] = total_lowmem >>PAGE_SHIFT ; - max_zone_pfns[1 ] = top_of_ram >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_lowmem >>PAGE_SHIFT ; + max_zone_pfns[ZONE_HIGHMEM ] = top_of_ram >>PAGE_SHIFT ;#else - max_zone_pfns[0 ] = top_of_ram >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = top_of_ram >>PAGE_SHIFT ;#endif free_area_init_nodes (max_zone_pfns); }
arch/powerpc/mm/numa.c +3 -3
@@ -617,9 +617,9 @@ void __init do_init_bootmem(void)void __init paging_init (void ) { -unsigned long max_zone_pfns[MAX_NR_ZONES ] = { -lmb_end_of_DRAM () >>PAGE_SHIFT - }; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =lmb_end_of_DRAM () >>PAGE_SHIFT ;free_area_init_nodes (max_zone_pfns); }
arch/ppc/mm/init.c +4 -3
@@ -374,11 +374,12 @@ void __init paging_init(void) end_pfn = start_pfn + (total_memory >>PAGE_SHIFT );add_active_range (0 , start_pfn, end_pfn); +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns));#ifdef CONFIG_HIGHMEM - max_zone_pfns[0 ] = total_lowmem >>PAGE_SHIFT ; - max_zone_pfns[1 ] = total_memory >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_lowmem >>PAGE_SHIFT ; + max_zone_pfns[ZONE_HIGHMEM ] = total_memory >>PAGE_SHIFT ;#else - max_zone_pfns[0 ] = total_memory >>PAGE_SHIFT ; + max_zone_pfns[ZONE_DMA ] = total_memory >>PAGE_SHIFT ;#endif /* CONFIG_HIGHMEM */ free_area_init_nodes (max_zone_pfns); }
arch/x86_64/mm/init.c +6 -3
@@ -406,9 +406,12 @@ void __cpuinit zap_low_mappings(int cpu)#ifndef CONFIG_NUMA void __init paging_init (void ) { -unsigned long max_zone_pfns[MAX_NR_ZONES ] = {MAX_DMA_PFN , -MAX_DMA32_PFN , - end_pfn}; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =MAX_DMA_PFN ; + max_zone_pfns[ZONE_DMA32 ] =MAX_DMA32_PFN ; + max_zone_pfns[ZONE_NORMAL ] = end_pfn; +memory_present (0 ,0 , end_pfn);sparse_init ();free_area_init_nodes (max_zone_pfns);
arch/x86_64/mm/numa.c +5 -3
@@ -338,9 +338,11 @@ static void __init arch_sparse_init(voidvoid __init paging_init (void ) {int i; -unsigned long max_zone_pfns[MAX_NR_ZONES ] = {MAX_DMA_PFN , -MAX_DMA32_PFN , - end_pfn}; +unsigned long max_zone_pfns[MAX_NR_ZONES ]; +memset (max_zone_pfns,0 ,sizeof (max_zone_pfns)); + max_zone_pfns[ZONE_DMA ] =MAX_DMA_PFN ; + max_zone_pfns[ZONE_DMA32 ] =MAX_DMA32_PFN ; + max_zone_pfns[ZONE_NORMAL ] = end_pfn;arch_sparse_init ();
Re: 2.6.19-rc1: known regressions
In reply to Adrian BunkHi.
Quoted 4 lines · Adrian Bunk
Contrary to popular belief, there are people who test -rc kernels and report bugs.
And there are even people who test -git kernels.
Slightly off topic, but let me report a "metoo" as far as testing -git goes (you can even find a suspend2-against-current-git tree on kernel.org now!), and some positive progress: for the first time in months, I'm reliably suspending and resuming my amd64 based laptop. I don't have an exact cause, but would guess at Andi's multitude of patches and/or any cpufreq fixes that might have slid in there too. It's been really strange writing software that others can use reliably, and not being able to reliably use it yourself! Kudos to all the authors of suspend/resume bug fixes that have gone in!
Nigel
PATCH 1/1 x86, fix rwsem build bug on CONFIG_M386=y
In reply to Adrian BunkQuoted 2 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18.
thanks Adrian - this list is extremely useful in my opinion! Please keep up the good work.
Quoted 6 lines
Subject :
CONFIG_M386=yrwsem compile error
References : http://lkml.org/lkml/2006/10/3/240
Submitter : Klaus Knopper <[email protected]>
Guilty : Andi Kleen <[email protected]>commit add659bf8aa92f8b3f01a8c0220557c959507fb1Status : unknown
find the fix below.
-------------------->
Subject: [patch] x86, fix rwsem build bug on CONFIG_M386=y
From: Ingo Molnar <[email protected]>
CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the semaphore.S rwsem stubs. Tested both with and without CONFIG_M386.
--- arch/i386/lib/semaphore.S | 3 +++ 1 file changed, 3 insertions(+)
arch/i386/lib/semaphore.S +3 -0
@@ -152,6 +152,8 @@ ENTRY(__read_lock_failed) #endif +#ifdef CONFIG_RWSEM_XCHGADD_ALGORITHM + /* Fix up special calling conventions */ ENTRY(call_rwsem_down_read_failed) CFI_STARTPROC
@@ -214,3 +216,4 @@ ENTRY(call_rwsem_downgrade_wake) CFI_ENDPROC END(call_rwsem_downgrade_wake) +#endif
Re: [discuss] [patch] x86, fix rwsem build bug on CONFIG_M386=y
Quoted 5 lines
-------------------->
Subject: [patch] x86, fix rwsem build bug onCONFIG_M386=y
From: Ingo Molnar <[email protected]>
added thanks
-Andi
cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
In reply to Adrian BunkI have an AMD K8 system and I'm unable to get cpufreq working with 2.6.19-rc1. The cpufreq sysfs directory is missing under /sys/devices/system/cpu/cpu0/. 2.6.18 works as expected.
I've also noticed an infiniband related problem. I have to disable Infiniband in the config to get the kernel to compile. Can't say more since I'm not using any Infinband stuff and therefore don't need it anyway.
I can say that 2.6.19-rc1 is very stable here. Much more than any rc that I've seen before. And it seems to have solved the sluggish performance on high I/O load too.
user@ubuntu:~$ lspci 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3) 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3) 00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2) 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) 00:07.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:08.0 RAID bus controller: nVidia Corporation CK804 Serial ATA Controller (rev f3) 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) 00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3) 00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 VGA compatible controller: nVidia Corporation Unknown device 0391 (rev a1) 05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.19-rc1
# Mon Oct 9 22:39:22 2006
#CONFIG_X86_64=yCONFIG_64BIT=yCONFIG_X86=yCONFIG_ZONE_DMA32=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_MMU=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=yCONFIG_EARLY_PRINTK=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_DMI=yCONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_IPC_NS=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_UTS_NS=yCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_CPUSETS=yCONFIG_RELAY=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_TASK_XACCT=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not setCONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_MTRR=yCONFIG_SMP=y
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_NODES_SHIFT=6CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not setCONFIG_ARCH_DISCONTIGMEM_ENABLE=yCONFIG_ARCH_DISCONTIGMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=yCONFIG_NR_CPUS=8CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not setCONFIG_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_SWIOTLB=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000CONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_REORDER=yCONFIG_K8_NB=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_ISA_DMA_API=yCONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION=""CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_HOTKEY=mCONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=yCONFIG_ACPI_ASUS=mCONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set CONFIG_ACPI_TOSHIBA=mCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=yCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=yCONFIG_X86_ACPI_CPUFREQ=m
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCIEAER=yCONFIG_PCI_MSI=y CONFIG_PCI_MULTITHREAD_PROBE=y CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_FWMARK=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_MULTIPATH_CACHED=yCONFIG_IP_ROUTE_MULTIPATH_RR=mCONFIG_IP_ROUTE_MULTIPATH_RANDOM=mCONFIG_IP_ROUTE_MULTIPATH_WRANDOM=mCONFIG_IP_ROUTE_MULTIPATH_DRR=mCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=yCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_ROUTE_FWMARK is not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not setCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not setCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not setCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_CT_ACCT=yCONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not setCONFIG_IP_NF_CONNTRACK_NETLINK=mCONFIG_IP_NF_CT_PROTO_SCTP=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_NETBIOS_NS=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_PPTP=mCONFIG_IP_NF_H323=m
# CONFIG_IP_NF_SIP is not setCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_IPRANGE=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_HASHLIMIT=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_SAME=mCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_NAT_TFTP=mCONFIG_IP_NF_NAT_AMANDA=mCONFIG_IP_NF_NAT_PPTP=mCONFIG_IP_NF_NAT_H323=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#CONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_OWNER=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=mCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=mCONFIG_IP_DCCP_TFRC_LIB=m
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=mCONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=m
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=mCONFIG_LAPB=mCONFIG_ECONET=mCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not setCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not setCONFIG_NET_ESTIMATOR=y
#
# Network testing
#CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=mCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not setCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=yCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=mCONFIG_BT_HCIVHCI=mCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=mCONFIG_IEEE80211_CRYPT_CCMP=mCONFIG_IEEE80211_CRYPT_TKIP=mCONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not setCONFIG_WIRELESS_EXT=y
# CONFIG_NETLABEL is not setCONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=yCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLOCK=mCONFIG_MTD_BLOCK_RO=mCONFIG_FTL=mCONFIG_NFTL=mCONFIG_NFTL_RW=yCONFIG_INFTL=mCONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=mCONFIG_MTD_RAM=mCONFIG_MTD_ROM=mCONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=mCONFIG_MTD_PHYSMAP_START=0x8000000CONFIG_MTD_PHYSMAP_LEN=0x4000000CONFIG_MTD_PHYSMAP_BANKWIDTH=2CONFIG_MTD_PNC2000=mCONFIG_MTD_SC520CDP=mCONFIG_MTD_NETSC520=mCONFIG_MTD_TS5500=mCONFIG_MTD_SBC_GXX=mCONFIG_MTD_AMD76XROM=mCONFIG_MTD_ICHXROM=mCONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=mCONFIG_MTD_DILNETPC=mCONFIG_MTD_DILNETPC_BOOTSIZE=0x80000CONFIG_MTD_L440GX=mCONFIG_MTD_PCI=mCONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not setCONFIG_MTD_DATAFLASH=mCONFIG_MTD_M25P80=mCONFIG_MTD_SLRAM=mCONFIG_MTD_PHRAM=mCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=mCONFIG_MTD_DOC2001=mCONFIG_MTD_DOC2001PLUS=mCONFIG_MTD_DOCPROBE=mCONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not setCONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#CONFIG_MTD_ONENAND=mCONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=mCONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=mCONFIG_PARIDE=mCONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEFLOPPY=mCONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=mCONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=mCONFIG_BLK_DEV_OPTI621=mCONFIG_BLK_DEV_RZ1000=mCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_AEC62XX=mCONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=mCONFIG_BLK_DEV_ATIIXP=mCONFIG_BLK_DEV_CMD64X=mCONFIG_BLK_DEV_TRIFLEX=mCONFIG_BLK_DEV_CY82C693=mCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not setCONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not setCONFIG_BLK_DEV_SC1200=mCONFIG_BLK_DEV_PIIX=mCONFIG_BLK_DEV_IT821X=mCONFIG_BLK_DEV_NS87415=mCONFIG_BLK_DEV_PDC202XX_OLD=mCONFIG_PDC202XX_BURST=yCONFIG_BLK_DEV_PDC202XX_NEW=mCONFIG_BLK_DEV_SVWKS=mCONFIG_BLK_DEV_SIIMAGE=mCONFIG_BLK_DEV_SIS5513=mCONFIG_BLK_DEV_SLC90E66=mCONFIG_BLK_DEV_TRM290=mCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#CONFIG_ISCSI_TCP=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_RESET_DELAY_MS=15000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000CONFIG_AIC79XX_ENABLE_RD_STRM=yCONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not setCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not setCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not setCONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#CONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #CONFIG_ATA=yCONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=mCONFIG_SATA_MV=mCONFIG_SATA_NV=yCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIL24=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INTEL_COMBINED=yCONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NS87410=mCONFIG_PATA_OPTI=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PCMCIA=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RZ1000=mCONFIG_PATA_SC1200=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=m
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID5_RESHAPE=yCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#CONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_IEEE1394_OUI_DB=yCONFIG_IEEE1394_EXTRA_CONFIG_ROMS=yCONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=mCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#CONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_EQUALIZER=mCONFIG_TUN=mCONFIG_NET_SB1000=m
#
# ARCnet devices
#CONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=mCONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=mCONFIG_ARCNET_COM20020=mCONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#CONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=m
#
# Tulip family network device support
#CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_HP100=mCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_PCNET32_NAPI=yCONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not setCONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not setCONFIG_B44=mCONFIG_FORCEDETH=mCONFIG_FORCEDETH_NAPI=yCONFIG_DGRS=mCONFIG_EEPRO100=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not setCONFIG_NET_POCKET=yCONFIG_ATP=mCONFIG_DE600=mCONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_DL2K=mCONFIG_E1000=mCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=mCONFIG_R8169_NAPI=yCONFIG_R8169_VLAN=yCONFIG_SIS190=mCONFIG_SKGE=mCONFIG_SKY2=mCONFIG_SK98LIN=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=mCONFIG_QLA3XXX=y
#
# Ethernet (10000 Mbit)
#CONFIG_CHELSIO_T1=mCONFIG_IXGB=mCONFIG_IXGB_NAPI=yCONFIG_S2IO=mCONFIG_S2IO_NAPI=yCONFIG_MYRI10GE=m
#
# Token Ring devices
#CONFIG_TR=yCONFIG_IBMOL=mCONFIG_3C359=mCONFIG_TMS380TR=mCONFIG_TMSPCI=mCONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=yCONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#CONFIG_STRIP=mCONFIG_PCMCIA_WAVELAN=mCONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#CONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_AIRO=mCONFIG_HERMES=mCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=mCONFIG_NORTEL_HERMES=mCONFIG_PCI_HERMES=mCONFIG_ATMEL=mCONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#CONFIG_PCMCIA_HERMES=mCONFIG_PCMCIA_SPECTRUM=mCONFIG_AIRO_CS=mCONFIG_PCMCIA_ATMEL=mCONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #CONFIG_PRISM54=mCONFIG_USB_ZD1201=mCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_HOSTAP_CS=mCONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set CONFIG_BCM43XX_DMA=yCONFIG_BCM43XX_PIO=y CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=mCONFIG_ARCNET_COM20020_CS=m
#
# Wan interfaces
#CONFIG_WAN=yCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_LANMEDIA=mCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300=mCONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package. #CONFIG_FARSYNC=mCONFIG_DLCI=mCONFIG_DLCI_COUNT=24CONFIG_DLCI_MAX=8CONFIG_WAN_ROUTER_DRIVERS=yCONFIG_CYCLADES_SYNC=mCONFIG_CYCLOMX_X25=yCONFIG_LAPBETHER=mCONFIG_X25_ASY=mCONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_FORE200E_MAYBE=mCONFIG_ATM_FORE200E_PCA=yCONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_FORE200E=mCONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_FDDI=yCONFIG_DEFXX=mCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not setCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_SHAPER=mCONFIG_NETCONSOLE=mCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#CONFIG_ISDN=m
#
# Old ISDN4Linux
#CONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not setCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#CONFIG_HISAX_SEDLBAUER_CS=mCONFIG_HISAX_ELSA_CS=mCONFIG_HISAX_AVM_A1_CS=mCONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=mCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=mCONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#CONFIG_ISDN_DRV_GIGASET=mCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#CONFIG_CAPI_EICON=yCONFIG_ISDN_DIVAS=mCONFIG_ISDN_DIVAS_BRIPCI=yCONFIG_ISDN_DIVAS_PRIPCI=yCONFIG_ISDN_DIVAS_DIVACAPI=mCONFIG_ISDN_DIVAS_USERIDI=mCONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#CONFIG_PHONE=mCONFIG_PHONE_IXJ=mCONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_VSXXXAA=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=mCONFIG_ROCKETPORT=mCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not setCONFIG_DIGIEPCA=mCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not setCONFIG_SX=m
# CONFIG_RIO is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=48CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_TIPAR=m
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not setCONFIG_SC1200_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=yCONFIG_NVRAM=mCONFIG_RTC=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=mCONFIG_AGP_SIS=mCONFIG_AGP_VIA=mCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_I915=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not setCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#CONFIG_TCG_TPM=mCONFIG_TCG_TIS=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=m
#
# I2C support
#CONFIG_I2C=mCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_OCORES=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_STUB=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=mCONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_DS1337=mCONFIG_SENSORS_DS1374=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#CONFIG_SPI=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#CONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=mCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#CONFIG_IBM_ASM=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9840=mCONFIG_VIDEO_TDA9875=mCONFIG_VIDEO_TEA6415C=mCONFIG_VIDEO_TEA6420=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=mCONFIG_VIDEO_KS0127=mCONFIG_VIDEO_SAA7110=mCONFIG_VIDEO_SAA7111=mCONFIG_VIDEO_SAA7114=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_VPX3220=mCONFIG_VIDEO_CX2341X=mCONFIG_VIDEO_SAA7185=mCONFIG_VIDEO_ADV7170=mCONFIG_VIDEO_ADV7175=mCONFIG_VIDEO_VIVI=mCONFIG_VIDEO_BT848=mCONFIG_VIDEO_BT848_DVB=yCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_BWQCAM=mCONFIG_VIDEO_CQCAM=mCONFIG_VIDEO_W9966=mCONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not setCONFIG_VIDEO_CPIA_USB=mCONFIG_VIDEO_CPIA2=mCONFIG_VIDEO_SAA5246A=mCONFIG_VIDEO_SAA5249=mCONFIG_TUNER_3036=mCONFIG_VIDEO_STRADIS=mCONFIG_VIDEO_ZORAN_ZR36060=mCONFIG_VIDEO_ZORAN=mCONFIG_VIDEO_ZORAN_BUZ=mCONFIG_VIDEO_ZORAN_DC10=mCONFIG_VIDEO_ZORAN_DC30=mCONFIG_VIDEO_ZORAN_LML33=mCONFIG_VIDEO_ZORAN_LML33R10=mCONFIG_VIDEO_ZORAN_AVS6EYES=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_OSS=mCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_MXB=mCONFIG_VIDEO_DPC=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#CONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_USBVIDEO=mCONFIG_USB_VICAM=mCONFIG_USB_IBMCAM=mCONFIG_USB_KONICAWC=mCONFIG_USB_QUICKCAM_MESSENGER=mCONFIG_USB_ET61X251=mCONFIG_VIDEO_OVCAMCHIP=mCONFIG_USB_W9968CF=mCONFIG_USB_OV511=mCONFIG_USB_SE401=mCONFIG_USB_SN9C102=mCONFIG_USB_STV680=mCONFIG_USB_ZC0301=mCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#CONFIG_RADIO_GEMTEK_PCI=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_MAESTRO=mCONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=yCONFIG_DVB_CORE=mCONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=yCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_DVB_CINERGYT2=mCONFIG_DVB_CINERGYT2_TUNING=yCONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=yCONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#CONFIG_DVB_STV0299=mCONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_TDA8083=mCONFIG_DVB_MT312=mCONFIG_DVB_VES1X93=mCONFIG_DVB_S5H1420=mCONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#CONFIG_DVB_PLL=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#CONFIG_DVB_LNBP21=mCONFIG_DVB_ISL6421=mCONFIG_DVB_TUA6100=mCONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=mCONFIG_VIDEO_VIDEOBUF=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_BUF=mCONFIG_VIDEO_BUF_DVB=mCONFIG_VIDEO_BTCX=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_USB_DABUSB=m
#
# Graphics support
#CONFIG_FIRMWARE_EDID=yCONFIG_FB=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=yCONFIG_FB_CIRRUS=mCONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=yCONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not setCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=mCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_GX=mCONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_DEVICE=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_DEVICE=y
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_AC97_BUS=mCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_MTS64=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
#
# PCI devices
#CONFIG_SND_AD1889=mCONFIG_SND_ALS300=mCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=mCONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=mCONFIG_SND_FM801_TEA575X_BOOL=yCONFIG_SND_FM801_TEA575X=mCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=mCONFIG_SND_MAESTRO3=mCONFIG_SND_MIXART=mCONFIG_SND_NM256=mCONFIG_SND_PCXHR=mCONFIG_SND_RIPTIDE=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SONICVIBES=mCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=mCONFIG_SND_VIA82XX_MODEM=mCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=mCONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#CONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#CONFIG_SND_VXPOCKET=mCONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#CONFIG_SOUND_PRIME=m
# CONFIG_OSS_OBSOLETE_DRIVER is not setCONFIG_SOUND_BT878=mCONFIG_SOUND_ES1371=mCONFIG_SOUND_ICH=mCONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not setCONFIG_SOUND_VIA82CXXX=mCONFIG_MIDI_VIA82CXXX=yCONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not setCONFIG_SOUND_CS4232=m
# CONFIG_SOUND_SSCAPE is not setCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=mCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=mCONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not setCONFIG_SOUND_TVMIXER=mCONFIG_SOUND_KAHLUA=m
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=mCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not setCONFIG_HID_FF=yCONFIG_HID_PID=yCONFIG_LOGITECH_FF=yCONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=mCONFIG_USB_MOUSE=mCONFIG_USB_AIPTEK=mCONFIG_USB_WACOM=mCONFIG_USB_ACECAD=mCONFIG_USB_KBTAB=mCONFIG_USB_POWERMATE=mCONFIG_USB_TOUCHSCREEN=mCONFIG_USB_TOUCHSCREEN_EGALAX=yCONFIG_USB_TOUCHSCREEN_PANJIT=yCONFIG_USB_TOUCHSCREEN_3M=yCONFIG_USB_TOUCHSCREEN_ITM=yCONFIG_USB_TOUCHSCREEN_ETURBO=yCONFIG_USB_TOUCHSCREEN_GUNZE=yCONFIG_USB_YEALINK=mCONFIG_USB_XPAD=mCONFIG_USB_ATI_REMOTE=mCONFIG_USB_ATI_REMOTE2=mCONFIG_USB_KEYSPAN_REMOTE=mCONFIG_USB_APPLETOUCH=mCONFIG_USB_TRANCEVIBRATOR=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_MON=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_AIRPRIME=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not setCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_LED=mCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_PHIDGET=mCONFIG_USB_PHIDGETKIT=mCONFIG_USB_PHIDGETMOTORCONTROL=mCONFIG_USB_PHIDGETSERVO=mCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not setCONFIG_USB_LD=mCONFIG_USB_TEST=m
#
# USB DSL modem support
#CONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not setCONFIG_USB_GADGET_SELECTED=yCONFIG_USB_GADGET_NET2280=yCONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not setCONFIG_USB_GADGET_DUALSPEED=yCONFIG_USB_ZERO=mCONFIG_USB_ETH=mCONFIG_USB_ETH_RNDIS=yCONFIG_USB_GADGETFS=mCONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not setCONFIG_USB_G_SERIAL=mCONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_BLOCK=mCONFIG_MMC_SDHCI=mCONFIG_MMC_WBSD=mCONFIG_MMC_TIFM_SD=m
#
# LED devices
#CONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_IDE_DISK=yCONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_E752X=mCONFIG_EDAC_POLL=y
#
# Real Time Clock
#CONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=mCONFIG_RTC_INTF_PROC=mCONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#CONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_RS5C348=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_M48T86=mCONFIG_RTC_DRV_TEST=mCONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_DELL_RBU=mCONFIG_DCDBAS=m
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_JBD=m
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=mCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_SECURITY=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_NOLOCK=mCONFIG_GFS2_FS_LOCKING_DLM=mCONFIG_OCFS2_FS=mCONFIG_OCFS2_DEBUG_MASKLOG=yCONFIG_MINIX_FS=mCONFIG_ROMFS_FS=mCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_DNOTIFY=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=mCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_ECRYPT_FS=mCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_JFFS_FS=mCONFIG_JFFS_FS_VERBOSE=0CONFIG_JFFS_PROC_FS=yCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not setCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not setCONFIG_CRAMFS=yCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=yCONFIG_CIFS_UPCALL=yCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not setCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_AFS_FS=mCONFIG_RXRPC=mCONFIG_9P_FS=mCONFIG_GENERIC_ACL=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="cp437"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=mCONFIG_KPROBES=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_LOG_BUF_SHIFT=15CONFIG_DEBUG_FS=yCONFIG_UNWIND_INFO=yCONFIG_STACK_UNWIND=y
# CONFIG_LKDTM is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=m CONFIG_SECURITY_ROOTPLUG=m CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_X86_64=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#CONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC32=yCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_REED_SOLOMON=mCONFIG_REED_SOLOMON_DEC16=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=y
RE: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Quoted 5 lines
I have an AMD K8 system and I'm unable to get cpufreq working with 2.6.19-rc1.
The cpufreq sysfs directory is missing under/sys/devices/system/cpu/cpu0/.
2.6.18 works as expected.
What error message are you getting from dmesg | grep power ?
I didn't make any changes to powernow-k8 for 2.6.19 so I'm surprised you found a regression.
-Mark Langsdorf
AMD, Inc.
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Am Dienstag, 10. Oktober 2006 16:59 schrieb Langsdorf, Mark:
Quoted 7 lines
Quoted 5 lines
I have an AMD K8 system and I'm unable to get cpufreq working with 2.6.19-rc1.
The cpufreq sysfs directory is missing under/sys/devices/system/cpu/cpu0/.
2.6.18 works as expected.What error message are you getting from
dmesg | grep power?
dmesg | grep power
[ 17.852383] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 17.852403] powernow-k8: MP systems not supported by PSB BIOS structure [ 17.852428] powernow-k8: MP systems not supported by PSB BIOS structure
Haven't seen this before.
-Christian
RE: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Quoted 16 lines
Am Dienstag, 10. Oktober 2006 16:59 schrieb Langsdorf, Mark:
Quoted 7 lines
Quoted 5 lines
I have an AMD K8 system and I'm unable to get cpufreq working with 2.6.19-rc1.
The cpufreq sysfs directory is missing under/sys/devices/system/cpu/cpu0/.
2.6.18 works as expected.What error message are you getting from
dmesg | grep power?dmesg | grep power
[ 17.852383] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 17.852403] powernow-k8: MP systems not supported by PSB BIOS structure [ 17.852428] powernow-k8: MP systems not supported by PSB
Quoted 3 lines
BIOS structure
Haven't seen this before.
I thought I cleaned that message out in v2.0.
The BIOS failed to supply _PSS objects that Linux could recognize. The powernow-k8 driver tried to use a PSB table, but MP/dual-core systems can't use PSB tables. The driver errored out.
If you can get it to work with 2.6.18 and it doesn't work with 2.6.19-rc1, the most likely culprit is a change in the ACPI subsystem.
Can you get decompiled dumps of the DSDT? See the ACPI pages on sourceforge if you need instructions.
-Mark Langsdorf
AMD, Inc.
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
It seems that my first try exceeded the LKML size limit. So hopefully you should get my decompiled DSDT now as a bzip compressed file.
-Christian
RE: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Quoted 3 lines
It seems that my first try exceeded the LKML size limit. So hopefully you should get my decompiled DSDT now as a bzip compressed file.
Right then. You're completely missing the _PCT, _PPC, and _PSS packages, as well as the CPU scope they're normally defined in. powernow-k8 is not going to work on this system.
If you boot with the 2.6.18 kernel, do you get the same decompiled DSDT? If not, there's an ACPI regression you need to report to Len Brown.
Have you upgraded the processors or BIOS on the box?
-Mark Langsdorf
AMD, Inc.
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Am Mittwoch, 11. Oktober 2006 19:33 schrieb Langsdorf, Mark:
Quoted 7 lines
Quoted 3 lines
It seems that my first try exceeded the LKML size limit. So hopefully you should get my decompiled DSDT now as a bzip compressed file.
Right then. You're completely missing the
_PCT,_PPC, and_PSSpackages, as well as the CPU scope they're normally defined in. powernow-k8 is not going to work on this system.
user@ubuntu:~$ uname -a Linux ubuntu.localnet 2.6.18-rc7 #2 SMP Wed Sep 13 11:28:41 CEST 2006 x86_64 GNU/Linux user@ubuntu:~$ dmesg | grep power [ 402.879894] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 402.880409] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 402.880412] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 402.880415] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 402.881299] powernow-k8: ph2 null fid transition 0xc
2.6.18-rc7 powerfreq works nice. Double checked it!
The decompiled DSDT is apparently the same on both kernels, except the filename in the dump. Maybe it's my fault. I've attached the binary DSDT dump of 2.6.18-rc7.
Quoted 5 lines
If you boot with the 2.6.18 kernel, do you get the same decompiled DSDT? If not, there's an ACPI regression you need to report to Len Brown.
Have you upgraded the processors or BIOS on the box?
No.
-Christian
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Quoted 20 lines · Christian
Am Mittwoch, 11. Oktober 2006 19:33 schrieb Langsdorf, Mark:
Quoted 7 lines
Quoted 3 lines
It seems that my first try exceeded the LKML size limit. So hopefully you should get my decompiled DSDT now as a bzip compressed file.
Right then. You're completely missing the
_PCT,_PPC, and_PSSpackages, as well as the CPU scope they're normally defined in. powernow-k8 is not going to work on this system.user@ubuntu:~$ uname -a Linux ubuntu.localnet 2.6.18-rc7 #2 SMP Wed Sep 13 11:28:41 CEST 2006 x86_64 GNU/Linux user@ubuntu:~$ dmesg | grep power [ 402.879894] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) [ 402.880409] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 [ 402.880412] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa [ 402.880415] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 402.881299] powernow-k8: ph2 null fid transition 0xc
Quoted 1 line
2.6.18-rc7 powerfreq works nice. Double checked it!
There are strange woes with cpufreq in current kernel. During
2.6.18-rc cpufreq-nforce2 was broken, then fixed (acpi-cpufreq was failing to propagate registration error) then broken again. It still doesn't work in 19-rc1.
Signature · 2 lines
Tomasz Torcz Only gods can safely risk perfection, [email protected] it's a dangerous thing for a man. -- Alia
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
In reply to ChristianQuoted 5 lines · Christian
...
I've also noticed an infiniband related problem. I have to disable Infiniband in the config to get the kernel to compile. Can't say more since I'm not using any Infinband stuff and therefore don't need it anyway.
...
Please send the .config for this bug.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Am Mittwoch, 11. Oktober 2006 06:23 schrieb Adrian Bunk:
Quoted 8 lines · Christian
Quoted 6 lines
...
I've also noticed an infiniband related problem. I have to disable Infiniband in the config to get the kernel to compile. Can't say more since I'm not using any Infinband stuff and therefore don't need it anyway.
...
Quoted 4 lines
Please send the .config for this bug.
cu
Adrian
This is the build error:
Kernel: arch/x86_64/boot/bzImage is ready (#5)
MODPOST 1602 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "to_qp_state_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined!
WARNING: "to_event_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined! make[1]: *** [__modpost] Fehler 1
make: *** [modules] Fehler 2
And here the .config:
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.19-rc1
# Wed Oct 11 11:07:36 2006
#CONFIG_X86_64=yCONFIG_64BIT=yCONFIG_X86=yCONFIG_ZONE_DMA32=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_MMU=yCONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=yCONFIG_EARLY_PRINTK=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_DMI=yCONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_IPC_NS=yCONFIG_POSIX_MQUEUE=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_UTS_NS=yCONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_CPUSETS=yCONFIG_RELAY=yCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_TASK_XACCT=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_KMOD=yCONFIG_STOP_MACHINE=y
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not setCONFIG_MK8=y
# CONFIG_MPSC is not set
# CONFIG_GENERIC_CPU is not setCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_TSC=yCONFIG_X86_GOOD_APIC=yCONFIG_MICROCODE=mCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_IO_APIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_MTRR=yCONFIG_SMP=y
# CONFIG_SCHED_SMT is not setCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not setCONFIG_PREEMPT=yCONFIG_PREEMPT_BKL=yCONFIG_NUMA=yCONFIG_K8_NUMA=yCONFIG_NODES_SHIFT=6CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not setCONFIG_ARCH_DISCONTIGMEM_ENABLE=yCONFIG_ARCH_DISCONTIGMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not setCONFIG_SPARSEMEM_EXTREME=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_MIGRATION=yCONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=yCONFIG_NR_CPUS=8CONFIG_HOTPLUG_CPU=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not setCONFIG_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_SWIOTLB=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000CONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_ALL is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_1000=yCONFIG_HZ=1000CONFIG_REORDER=yCONFIG_K8_NB=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_ISA_DMA_API=yCONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#CONFIG_PM=yCONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION=""CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_SLEEP_PROC_FS=y CONFIG_ACPI_SLEEP_PROC_SLEEP=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_HOTKEY=mCONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=mCONFIG_ACPI_NUMA=yCONFIG_ACPI_ASUS=mCONFIG_ACPI_IBM=m
# CONFIG_ACPI_IBM_DOCK is not set CONFIG_ACPI_TOSHIBA=mCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=mCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# CPUFreq processor drivers
#CONFIG_X86_POWERNOW_K8=yCONFIG_X86_SPEEDSTEP_CENTRINO=mCONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=yCONFIG_X86_ACPI_CPUFREQ=m
#
# shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set CONFIG_PCIEAER=yCONFIG_PCI_MSI=y CONFIG_PCI_MULTITHREAD_PROBE=y CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_FAKE=m CONFIG_HOTPLUG_PCI_ACPI=m CONFIG_HOTPLUG_PCI_ACPI_IBM=m CONFIG_HOTPLUG_PCI_CPCI=y CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_COMPAT=yCONFIG_SYSVIPC_COMPAT=y
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=mCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=yCONFIG_XFRM_USER=mCONFIG_XFRM_SUB_POLICY=yCONFIG_NET_KEY=mCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not setCONFIG_IP_FIB_HASH=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_FWMARK=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_MULTIPATH_CACHED=yCONFIG_IP_ROUTE_MULTIPATH_RR=mCONFIG_IP_ROUTE_MULTIPATH_RANDOM=mCONFIG_IP_ROUTE_MULTIPATH_WRANDOM=mCONFIG_IP_ROUTE_MULTIPATH_DRR=mCONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=yCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=yCONFIG_INET_XFRM_MODE_TUNNEL=yCONFIG_INET_XFRM_MODE_BEET=yCONFIG_INET_DIAG=yCONFIG_INET_TCP_DIAG=yCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=m
# CONFIG_DEFAULT_BIC is not setCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IPV6=mCONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=yCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_ROUTE_FWMARK is not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not setCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
# CONFIG_NETFILTER_XT_TARGET_SECMARK is not setCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not setCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not setCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=mCONFIG_IP_NF_CT_ACCT=yCONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_SECMARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not setCONFIG_IP_NF_CONNTRACK_NETLINK=mCONFIG_IP_NF_CT_PROTO_SCTP=mCONFIG_IP_NF_FTP=mCONFIG_IP_NF_IRC=mCONFIG_IP_NF_NETBIOS_NS=mCONFIG_IP_NF_TFTP=mCONFIG_IP_NF_AMANDA=mCONFIG_IP_NF_PPTP=mCONFIG_IP_NF_H323=m
# CONFIG_IP_NF_SIP is not setCONFIG_IP_NF_QUEUE=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_IPRANGE=mCONFIG_IP_NF_MATCH_TOS=mCONFIG_IP_NF_MATCH_RECENT=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_MATCH_OWNER=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_HASHLIMIT=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_IP_NF_TARGET_TCPMSS=mCONFIG_IP_NF_NAT=mCONFIG_IP_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_SAME=mCONFIG_IP_NF_NAT_SNMP_BASIC=mCONFIG_IP_NF_NAT_IRC=mCONFIG_IP_NF_NAT_FTP=mCONFIG_IP_NF_NAT_TFTP=mCONFIG_IP_NF_NAT_AMANDA=mCONFIG_IP_NF_NAT_PPTP=mCONFIG_IP_NF_NAT_H323=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_TOS=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#CONFIG_IP6_NF_QUEUE=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_OWNER=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_LOG=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_RAW=m
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=m
#
# Bridge: Netfilter Configuration
#CONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=mCONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not setCONFIG_IP_DCCP_CCID3=mCONFIG_IP_DCCP_TFRC_LIB=m
#
# SCTP Configuration (EXPERIMENTAL)
#CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not setCONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not setCONFIG_ATM=yCONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_BRIDGE=mCONFIG_VLAN_8021Q=mCONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=yCONFIG_LLC2=mCONFIG_IPX=m
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_IPDDP_DECAP=yCONFIG_X25=mCONFIG_LAPB=mCONFIG_ECONET=mCONFIG_ECONET_AUNUDP=yCONFIG_ECONET_NATIVE=yCONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#CONFIG_NET_SCHED=yCONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_INGRESS=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_ROUTE=yCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not setCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not setCONFIG_NET_CLS_POLICE=y
# CONFIG_NET_CLS_IND is not setCONFIG_NET_ESTIMATOR=y
#
# Network testing
#CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not setCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=mCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=yCONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not setCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=m
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=m
# CONFIG_MCS_FIR is not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIUSB=mCONFIG_BT_HCIUSB_SCO=yCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=mCONFIG_BT_HCIVHCI=mCONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not setCONFIG_IEEE80211_CRYPT_WEP=mCONFIG_IEEE80211_CRYPT_CCMP=mCONFIG_IEEE80211_CRYPT_TKIP=mCONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not setCONFIG_WIRELESS_EXT=y
# CONFIG_NETLABEL is not setCONFIG_FIB_RULES=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=yCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLOCK=mCONFIG_MTD_BLOCK_RO=mCONFIG_FTL=mCONFIG_NFTL=mCONFIG_NFTL_RW=yCONFIG_INFTL=mCONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=mCONFIG_MTD_RAM=mCONFIG_MTD_ROM=mCONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=mCONFIG_MTD_PHYSMAP_START=0x8000000CONFIG_MTD_PHYSMAP_LEN=0x4000000CONFIG_MTD_PHYSMAP_BANKWIDTH=2CONFIG_MTD_PNC2000=mCONFIG_MTD_SC520CDP=mCONFIG_MTD_NETSC520=mCONFIG_MTD_TS5500=mCONFIG_MTD_SBC_GXX=mCONFIG_MTD_AMD76XROM=mCONFIG_MTD_ICHXROM=mCONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=mCONFIG_MTD_DILNETPC=mCONFIG_MTD_DILNETPC_BOOTSIZE=0x80000CONFIG_MTD_L440GX=mCONFIG_MTD_PCI=mCONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not setCONFIG_MTD_DATAFLASH=mCONFIG_MTD_M25P80=mCONFIG_MTD_SLRAM=mCONFIG_MTD_PHRAM=mCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOC2000=mCONFIG_MTD_DOC2001=mCONFIG_MTD_DOC2001PLUS=mCONFIG_MTD_DOCPROBE=mCONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not setCONFIG_MTD_DOCPROBE_ADDRESS=0
#
# NAND Flash Device Drivers
#CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=m CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#CONFIG_MTD_ONENAND=mCONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
#CONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=mCONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#CONFIG_PNPACPI=y
#
# Block devices
#CONFIG_BLK_DEV_FD=mCONFIG_PARIDE=mCONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024CONFIG_BLK_DEV_INITRD=yCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8CONFIG_CDROM_PKTCDVD_WCACHE=yCONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=mCONFIG_BLK_DEV_IDETAPE=mCONFIG_BLK_DEV_IDEFLOPPY=mCONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#CONFIG_IDE_GENERIC=mCONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not setCONFIG_BLK_DEV_GENERIC=mCONFIG_BLK_DEV_OPTI621=mCONFIG_BLK_DEV_RZ1000=mCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not setCONFIG_BLK_DEV_AEC62XX=mCONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not setCONFIG_BLK_DEV_AMD74XX=mCONFIG_BLK_DEV_ATIIXP=mCONFIG_BLK_DEV_CMD64X=mCONFIG_BLK_DEV_TRIFLEX=mCONFIG_BLK_DEV_CY82C693=mCONFIG_BLK_DEV_CS5520=mCONFIG_BLK_DEV_CS5530=mCONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not setCONFIG_BLK_DEV_HPT366=m
# CONFIG_BLK_DEV_JMICRON is not setCONFIG_BLK_DEV_SC1200=mCONFIG_BLK_DEV_PIIX=mCONFIG_BLK_DEV_IT821X=mCONFIG_BLK_DEV_NS87415=mCONFIG_BLK_DEV_PDC202XX_OLD=mCONFIG_PDC202XX_BURST=yCONFIG_BLK_DEV_PDC202XX_NEW=mCONFIG_BLK_DEV_SVWKS=mCONFIG_BLK_DEV_SIIMAGE=mCONFIG_BLK_DEV_SIS5513=mCONFIG_BLK_DEV_SLC90E66=mCONFIG_BLK_DEV_TRM290=mCONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=mCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=mCONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #CONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=mCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_LIBSAS_DEBUG=y
#
# SCSI low-level drivers
#CONFIG_ISCSI_TCP=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_RESET_DELAY_MS=15000CONFIG_AIC7XXX_DEBUG_ENABLE=yCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC7XXX_OLD=mCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=15000CONFIG_AIC79XX_ENABLE_RD_STRM=yCONFIG_AIC79XX_DEBUG_ENABLE=yCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not setCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_HPTIOP is not setCONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not setCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not setCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not setCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not setCONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not setCONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#CONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=m
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #CONFIG_ATA=yCONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=mCONFIG_SATA_MV=mCONFIG_SATA_NV=yCONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SX4=mCONFIG_SATA_SIL=mCONFIG_SATA_SIL24=mCONFIG_SATA_SIS=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=mCONFIG_SATA_INTEL_COMBINED=yCONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_ATA_GENERIC=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_MPIIX=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NS87410=mCONFIG_PATA_OPTI=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PCMCIA=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RZ1000=mCONFIG_PATA_SC1200=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=m
#
# Multi-device support (RAID and LVM)
#CONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_RAID5_RESHAPE=yCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not setCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#CONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not setCONFIG_IEEE1394_OUI_DB=yCONFIG_IEEE1394_EXTRA_CONFIG_ROMS=yCONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set
#
# Device Drivers
#CONFIG_IEEE1394_PCILYNX=mCONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#CONFIG_IEEE1394_VIDEO1394=mCONFIG_IEEE1394_SBP2=mCONFIG_IEEE1394_ETH1394=mCONFIG_IEEE1394_DV1394=mCONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#CONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=mCONFIG_I2O_CONFIG_OLD_IOCTL=yCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=m
#
# Network device support
#CONFIG_NETDEVICES=yCONFIG_DUMMY=mCONFIG_BONDING=mCONFIG_EQUALIZER=mCONFIG_TUN=mCONFIG_NET_SB1000=m
#
# ARCnet devices
#CONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=mCONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=mCONFIG_ARCNET_COM20020=mCONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#CONFIG_PHYLIB=m
#
# MII PHY device drivers
#CONFIG_MARVELL_PHY=mCONFIG_DAVICOM_PHY=mCONFIG_QSEMI_PHY=mCONFIG_LXT_PHY=mCONFIG_CICADA_PHY=m
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_FIXED_PHY is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=mCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NET_VENDOR_3COM=yCONFIG_VORTEX=mCONFIG_TYPHOON=m
#
# Tulip family network device support
#CONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_HP100=mCONFIG_NET_PCI=yCONFIG_PCNET32=mCONFIG_PCNET32_NAPI=yCONFIG_AMD8111_ETH=m
# CONFIG_AMD8111E_NAPI is not setCONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not setCONFIG_B44=mCONFIG_FORCEDETH=mCONFIG_FORCEDETH_NAPI=yCONFIG_DGRS=mCONFIG_EEPRO100=mCONFIG_E100=mCONFIG_FEALNX=mCONFIG_NATSEMI=mCONFIG_NE2K_PCI=mCONFIG_8139CP=mCONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_SIS900=mCONFIG_EPIC100=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not setCONFIG_NET_POCKET=yCONFIG_ATP=mCONFIG_DE600=mCONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_DL2K=mCONFIG_E1000=mCONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not setCONFIG_NS83820=mCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_R8169=mCONFIG_R8169_NAPI=yCONFIG_R8169_VLAN=yCONFIG_SIS190=mCONFIG_SKGE=mCONFIG_SKY2=mCONFIG_SK98LIN=mCONFIG_VIA_VELOCITY=mCONFIG_TIGON3=mCONFIG_BNX2=mCONFIG_QLA3XXX=y
#
# Ethernet (10000 Mbit)
#CONFIG_CHELSIO_T1=mCONFIG_IXGB=mCONFIG_IXGB_NAPI=yCONFIG_S2IO=mCONFIG_S2IO_NAPI=yCONFIG_MYRI10GE=m
#
# Token Ring devices
#CONFIG_TR=yCONFIG_IBMOL=mCONFIG_3C359=mCONFIG_TMS380TR=mCONFIG_TMSPCI=mCONFIG_ABYSS=m
#
# Wireless LAN (non-hamradio)
#CONFIG_NET_RADIO=yCONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#CONFIG_STRIP=mCONFIG_PCMCIA_WAVELAN=mCONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#CONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_AIRO=mCONFIG_HERMES=mCONFIG_PLX_HERMES=mCONFIG_TMD_HERMES=mCONFIG_NORTEL_HERMES=mCONFIG_PCI_HERMES=mCONFIG_ATMEL=mCONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#CONFIG_PCMCIA_HERMES=mCONFIG_PCMCIA_SPECTRUM=mCONFIG_AIRO_CS=mCONFIG_PCMCIA_ATMEL=mCONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support #CONFIG_PRISM54=mCONFIG_USB_ZD1201=mCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y CONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_HOSTAP_CS=mCONFIG_BCM43XX=m
# CONFIG_BCM43XX_DEBUG is not set CONFIG_BCM43XX_DMA=yCONFIG_BCM43XX_PIO=y CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#CONFIG_NET_PCMCIA=yCONFIG_PCMCIA_3C589=mCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_FMVJ18X=mCONFIG_PCMCIA_PCNET=mCONFIG_PCMCIA_NMCLAN=mCONFIG_PCMCIA_SMC91C92=mCONFIG_PCMCIA_XIRC2PS=mCONFIG_PCMCIA_AXNET=mCONFIG_ARCNET_COM20020_CS=m
#
# Wan interfaces
#CONFIG_WAN=yCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_LANMEDIA=mCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300=mCONFIG_PC300_MLPPP=y
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package. #CONFIG_FARSYNC=mCONFIG_DLCI=mCONFIG_DLCI_COUNT=24CONFIG_DLCI_MAX=8CONFIG_WAN_ROUTER_DRIVERS=yCONFIG_CYCLADES_SYNC=mCONFIG_CYCLOMX_X25=yCONFIG_LAPBETHER=mCONFIG_X25_ASY=mCONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not setCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_FORE200E_MAYBE=mCONFIG_ATM_FORE200E_PCA=yCONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_FORE200E=mCONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_FDDI=yCONFIG_DEFXX=mCONFIG_SKFP=mCONFIG_HIPPI=yCONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not setCONFIG_PLIP=mCONFIG_PPP=mCONFIG_PPP_MULTILINK=yCONFIG_PPP_FILTER=yCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_BSDCOMP=mCONFIG_PPP_MPPE=mCONFIG_PPPOE=mCONFIG_PPPOATM=mCONFIG_SLIP=mCONFIG_SLIP_COMPRESSED=yCONFIG_SLHC=mCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=yCONFIG_NET_FC=yCONFIG_SHAPER=mCONFIG_NETCONSOLE=mCONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#CONFIG_ISDN=m
#
# Old ISDN4Linux
#CONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not setCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#CONFIG_HISAX_SEDLBAUER_CS=mCONFIG_HISAX_ELSA_CS=mCONFIG_HISAX_AVM_A1_CS=mCONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=mCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=mCONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#CONFIG_ISDN_DRV_GIGASET=mCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIFS_BOOL=yCONFIG_ISDN_CAPI_CAPIFS=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#CONFIG_CAPI_EICON=yCONFIG_ISDN_DIVAS=mCONFIG_ISDN_DIVAS_BRIPCI=yCONFIG_ISDN_DIVAS_PRIPCI=yCONFIG_ISDN_DIVAS_DIVACAPI=mCONFIG_ISDN_DIVAS_USERIDI=mCONFIG_ISDN_DIVAS_MAINT=m
#
# Telephony Support
#CONFIG_PHONE=mCONFIG_PHONE_IXJ=mCONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_TSDEV=mCONFIG_INPUT_TSDEV_SCREEN_X=240CONFIG_INPUT_TSDEV_SCREEN_Y=320CONFIG_INPUT_EVDEV=mCONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_NEWTON=m
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_VSXXXAA=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_ADS7846=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not setCONFIG_INPUT_MISC=yCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_SERIAL_NONSTANDARD=yCONFIG_COMPUTONE=mCONFIG_ROCKETPORT=mCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not setCONFIG_DIGIEPCA=mCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not setCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_N_HDLC=mCONFIG_SPECIALIX=m
# CONFIG_SPECIALIX_RTSCTS is not setCONFIG_SX=m
# CONFIG_RIO is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=yCONFIG_SERIAL_8250_CS=mCONFIG_SERIAL_8250_NR_UARTS=48CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=yCONFIG_SERIAL_8250_MANY_PORTS=yCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_SERIAL_JSM=mCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_TIPAR=m
#
# IPMI
#CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_SC520_WDT=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not setCONFIG_SC1200_WDT=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=mCONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_INTEL=yCONFIG_HW_RANDOM_AMD=yCONFIG_HW_RANDOM_GEODE=yCONFIG_NVRAM=mCONFIG_RTC=yCONFIG_DTLK=mCONFIG_R3964=mCONFIG_APPLICOM=m
#
# Ftape, the floppy tape device driver
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=mCONFIG_AGP_SIS=mCONFIG_AGP_VIA=mCONFIG_DRM=mCONFIG_DRM_TDFX=mCONFIG_DRM_R128=mCONFIG_DRM_RADEON=mCONFIG_DRM_I810=mCONFIG_DRM_I830=mCONFIG_DRM_I915=mCONFIG_DRM_MGA=mCONFIG_DRM_SIS=mCONFIG_DRM_VIA=mCONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not setCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not setCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#CONFIG_TCG_TPM=mCONFIG_TCG_TIS=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TELCLOCK=m
#
# I2C support
#CONFIG_I2C=mCONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCF=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_I810=mCONFIG_I2C_PIIX4=mCONFIG_I2C_ISA=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_OCORES=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_PROSAVAGE=mCONFIG_I2C_SAVAGE4=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_STUB=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=mCONFIG_I2C_VOODOO3=mCONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#CONFIG_SENSORS_DS1337=mCONFIG_SENSORS_DS1374=mCONFIG_SENSORS_EEPROM=mCONFIG_SENSORS_PCF8574=mCONFIG_SENSORS_PCA9539=mCONFIG_SENSORS_PCF8591=mCONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#CONFIG_SPI=yCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=m
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#CONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=mCONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_FSCHER=mCONFIG_SENSORS_FSCPOS=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#CONFIG_IBM_ASM=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=m
#
# Multimedia devices
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9840=mCONFIG_VIDEO_TDA9875=mCONFIG_VIDEO_TEA6415C=mCONFIG_VIDEO_TEA6420=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=mCONFIG_VIDEO_KS0127=mCONFIG_VIDEO_SAA7110=mCONFIG_VIDEO_SAA7111=mCONFIG_VIDEO_SAA7114=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_VPX3220=mCONFIG_VIDEO_CX2341X=mCONFIG_VIDEO_SAA7185=mCONFIG_VIDEO_ADV7170=mCONFIG_VIDEO_ADV7175=mCONFIG_VIDEO_VIVI=mCONFIG_VIDEO_BT848=mCONFIG_VIDEO_BT848_DVB=yCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_BWQCAM=mCONFIG_VIDEO_CQCAM=mCONFIG_VIDEO_W9966=mCONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not setCONFIG_VIDEO_CPIA_USB=mCONFIG_VIDEO_CPIA2=mCONFIG_VIDEO_SAA5246A=mCONFIG_VIDEO_SAA5249=mCONFIG_TUNER_3036=mCONFIG_VIDEO_STRADIS=mCONFIG_VIDEO_ZORAN_ZR36060=mCONFIG_VIDEO_ZORAN=mCONFIG_VIDEO_ZORAN_BUZ=mCONFIG_VIDEO_ZORAN_DC10=mCONFIG_VIDEO_ZORAN_DC30=mCONFIG_VIDEO_ZORAN_LML33=mCONFIG_VIDEO_ZORAN_LML33R10=mCONFIG_VIDEO_ZORAN_AVS6EYES=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_OSS=mCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_MXB=mCONFIG_VIDEO_DPC=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_VP3054=m
#
# V4L USB devices
#CONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_USBVIDEO=mCONFIG_USB_VICAM=mCONFIG_USB_IBMCAM=mCONFIG_USB_KONICAWC=mCONFIG_USB_QUICKCAM_MESSENGER=mCONFIG_USB_ET61X251=mCONFIG_VIDEO_OVCAMCHIP=mCONFIG_USB_W9968CF=mCONFIG_USB_OV511=mCONFIG_USB_SE401=mCONFIG_USB_SN9C102=mCONFIG_USB_STV680=mCONFIG_USB_ZC0301=mCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#CONFIG_RADIO_GEMTEK_PCI=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_MAESTRO=mCONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=yCONFIG_DVB_CORE=mCONFIG_DVB_CORE_ATTACH=y
#
# Supported SAA7146 based PCI Adapters
#CONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=yCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=mCONFIG_DVB_USB_DIBUSB_MB_FAULTY=yCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_DVB_CINERGYT2=mCONFIG_DVB_CINERGYT2_TUNING=yCONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=yCONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
#
# Supported FlexCopII (B2C2) Adapters
#CONFIG_DVB_B2C2_FLEXCOP=mCONFIG_DVB_B2C2_FLEXCOP_PCI=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#CONFIG_DVB_STV0299=mCONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_TDA8083=mCONFIG_DVB_MT312=mCONFIG_DVB_VES1X93=mCONFIG_DVB_S5H1420=mCONFIG_DVB_TDA10086=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #CONFIG_DVB_NXT200X=mCONFIG_DVB_OR51211=mCONFIG_DVB_OR51132=mCONFIG_DVB_BCM3510=mCONFIG_DVB_LGDT330X=m
#
# Tuners/PLL support
#CONFIG_DVB_PLL=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUNER_MT2060=m
#
# Miscellaneous devices
#CONFIG_DVB_LNBP21=mCONFIG_DVB_ISL6421=mCONFIG_DVB_TUA6100=mCONFIG_VIDEO_SAA7146=mCONFIG_VIDEO_SAA7146_VV=mCONFIG_VIDEO_VIDEOBUF=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_BUF=mCONFIG_VIDEO_BUF_DVB=mCONFIG_VIDEO_BTCX=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_USB_DABUSB=m
#
# Graphics support
#CONFIG_FIRMWARE_EDID=yCONFIG_FB=yCONFIG_FB_DDC=mCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=yCONFIG_FB_CIRRUS=mCONFIG_FB_PM2=mCONFIG_FB_PM2_FIFO_DISCONNECT=yCONFIG_FB_CYBER2000=m
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not setCONFIG_FB_VGA16=mCONFIG_FB_VESA=yCONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not setCONFIG_FB_S1D13XXX=mCONFIG_FB_NVIDIA=mCONFIG_FB_NVIDIA_I2C=yCONFIG_FB_RIVA=mCONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_INTEL is not setCONFIG_FB_MATROX=mCONFIG_FB_MATROX_MILLENIUM=yCONFIG_FB_MATROX_MYSTIQUE=yCONFIG_FB_MATROX_G=yCONFIG_FB_MATROX_I2C=mCONFIG_FB_MATROX_MAVEN=mCONFIG_FB_MATROX_MULTIHEAD=yCONFIG_FB_RADEON=mCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not setCONFIG_FB_ATY128=mCONFIG_FB_ATY=mCONFIG_FB_ATY_CT=yCONFIG_FB_ATY_GENERIC_LCD=yCONFIG_FB_ATY_GX=yCONFIG_FB_SAVAGE=mCONFIG_FB_SAVAGE_I2C=yCONFIG_FB_SAVAGE_ACCEL=yCONFIG_FB_SIS=mCONFIG_FB_SIS_300=yCONFIG_FB_SIS_315=yCONFIG_FB_NEOMAGIC=mCONFIG_FB_KYRO=mCONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not setCONFIG_FB_VOODOO1=mCONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not setCONFIG_FB_GEODE=yCONFIG_FB_GEODE_GX=mCONFIG_FB_GEODE_GX1=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=yCONFIG_VGACON_SOFT_SCROLLBACK=yCONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64CONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_DEVICE=yCONFIG_LCD_CLASS_DEVICE=mCONFIG_LCD_DEVICE=y
#
# Sound
#CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#CONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_SEQUENCER=mCONFIG_SND_SEQ_DUMMY=mCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_RTCTIMER=mCONFIG_SND_SEQ_RTCTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=yCONFIG_SND_SUPPORT_OLD_API=yCONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=mCONFIG_SND_OPL3_LIB=mCONFIG_SND_VX_LIB=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_AC97_BUS=mCONFIG_SND_DUMMY=mCONFIG_SND_VIRMIDI=mCONFIG_SND_MTPAV=mCONFIG_SND_MTS64=mCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=m
#
# PCI devices
#CONFIG_SND_AD1889=mCONFIG_SND_ALS300=mCONFIG_SND_ALS4000=mCONFIG_SND_ALI5451=mCONFIG_SND_ATIIXP=mCONFIG_SND_ATIIXP_MODEM=mCONFIG_SND_AU8810=mCONFIG_SND_AU8820=mCONFIG_SND_AU8830=mCONFIG_SND_AZT3328=mCONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not setCONFIG_SND_CA0106=mCONFIG_SND_CMIPCI=mCONFIG_SND_CS4281=mCONFIG_SND_CS46XX=mCONFIG_SND_CS46XX_NEW_DSP=yCONFIG_SND_DARLA20=mCONFIG_SND_GINA20=mCONFIG_SND_LAYLA20=mCONFIG_SND_DARLA24=mCONFIG_SND_GINA24=mCONFIG_SND_LAYLA24=mCONFIG_SND_MONA=mCONFIG_SND_MIA=mCONFIG_SND_ECHO3G=mCONFIG_SND_INDIGO=mCONFIG_SND_INDIGOIO=mCONFIG_SND_INDIGODJ=mCONFIG_SND_EMU10K1=mCONFIG_SND_EMU10K1X=mCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=mCONFIG_SND_ES1938=mCONFIG_SND_ES1968=mCONFIG_SND_FM801=mCONFIG_SND_FM801_TEA575X_BOOL=yCONFIG_SND_FM801_TEA575X=mCONFIG_SND_HDA_INTEL=mCONFIG_SND_HDSP=mCONFIG_SND_HDSPM=mCONFIG_SND_ICE1712=mCONFIG_SND_ICE1724=mCONFIG_SND_INTEL8X0=mCONFIG_SND_INTEL8X0M=mCONFIG_SND_KORG1212=mCONFIG_SND_MAESTRO3=mCONFIG_SND_MIXART=mCONFIG_SND_NM256=mCONFIG_SND_PCXHR=mCONFIG_SND_RIPTIDE=mCONFIG_SND_RME32=mCONFIG_SND_RME96=mCONFIG_SND_RME9652=mCONFIG_SND_SONICVIBES=mCONFIG_SND_TRIDENT=mCONFIG_SND_VIA82XX=mCONFIG_SND_VIA82XX_MODEM=mCONFIG_SND_VX222=mCONFIG_SND_YMFPCI=mCONFIG_SND_AC97_POWER_SAVE=y
#
# USB devices
#CONFIG_SND_USB_AUDIO=mCONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#CONFIG_SND_VXPOCKET=mCONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#CONFIG_SOUND_PRIME=m
# CONFIG_OSS_OBSOLETE_DRIVER is not setCONFIG_SOUND_BT878=mCONFIG_SOUND_ES1371=mCONFIG_SOUND_ICH=mCONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not setCONFIG_SOUND_VIA82CXXX=mCONFIG_MIDI_VIA82CXXX=yCONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not setCONFIG_SOUND_CS4232=m
# CONFIG_SOUND_SSCAPE is not setCONFIG_SOUND_VMIDI=mCONFIG_SOUND_TRIX=mCONFIG_SOUND_MSS=mCONFIG_SOUND_MPU401=mCONFIG_SOUND_PAS=mCONFIG_SOUND_PSS=mCONFIG_PSS_MIXER=yCONFIG_SOUND_SB=mCONFIG_SOUND_YM3812=mCONFIG_SOUND_UART6850=mCONFIG_SOUND_AEDSP16=mCONFIG_SC6600=yCONFIG_SC6600_JOY=yCONFIG_SC6600_CDROM=4CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not setCONFIG_SOUND_TVMIXER=mCONFIG_SOUND_KAHLUA=m
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_BANDWIDTH=yCONFIG_USB_DYNAMIC_MINORS=yCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_SPLIT_ISO=yCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=mCONFIG_USB_U132_HCD=mCONFIG_USB_SL811_HCD=mCONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#CONFIG_USB_ACM=mCONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_USBAT=y CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_KARMA=y CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#CONFIG_USB_HID=mCONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not setCONFIG_HID_FF=yCONFIG_HID_PID=yCONFIG_LOGITECH_FF=yCONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not setCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#CONFIG_USB_KBD=mCONFIG_USB_MOUSE=mCONFIG_USB_AIPTEK=mCONFIG_USB_WACOM=mCONFIG_USB_ACECAD=mCONFIG_USB_KBTAB=mCONFIG_USB_POWERMATE=mCONFIG_USB_TOUCHSCREEN=mCONFIG_USB_TOUCHSCREEN_EGALAX=yCONFIG_USB_TOUCHSCREEN_PANJIT=yCONFIG_USB_TOUCHSCREEN_3M=yCONFIG_USB_TOUCHSCREEN_ITM=yCONFIG_USB_TOUCHSCREEN_ETURBO=yCONFIG_USB_TOUCHSCREEN_GUNZE=yCONFIG_USB_YEALINK=mCONFIG_USB_XPAD=mCONFIG_USB_ATI_REMOTE=mCONFIG_USB_ATI_REMOTE2=mCONFIG_USB_KEYSPAN_REMOTE=mCONFIG_USB_APPLETOUCH=mCONFIG_USB_TRANCEVIBRATOR=m
#
# USB Imaging devices
#CONFIG_USB_MDC800=mCONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_MON=y
#
# USB port drivers
#CONFIG_USB_USS720=m
#
# USB Serial Converter support
#CONFIG_USB_SERIAL=mCONFIG_USB_SERIAL_GENERIC=yCONFIG_USB_SERIAL_AIRCABLE=mCONFIG_USB_SERIAL_AIRPRIME=mCONFIG_USB_SERIAL_ARK3116=mCONFIG_USB_SERIAL_BELKIN=mCONFIG_USB_SERIAL_WHITEHEAT=mCONFIG_USB_SERIAL_DIGI_ACCELEPORT=mCONFIG_USB_SERIAL_CP2101=mCONFIG_USB_SERIAL_CYPRESS_M8=mCONFIG_USB_SERIAL_EMPEG=mCONFIG_USB_SERIAL_FTDI_SIO=mCONFIG_USB_SERIAL_FUNSOFT=mCONFIG_USB_SERIAL_VISOR=mCONFIG_USB_SERIAL_IPAQ=mCONFIG_USB_SERIAL_IR=mCONFIG_USB_SERIAL_EDGEPORT=mCONFIG_USB_SERIAL_EDGEPORT_TI=mCONFIG_USB_SERIAL_GARMIN=mCONFIG_USB_SERIAL_IPW=mCONFIG_USB_SERIAL_KEYSPAN_PDA=mCONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not setCONFIG_USB_SERIAL_KLSI=mCONFIG_USB_SERIAL_KOBIL_SCT=mCONFIG_USB_SERIAL_MCT_U232=mCONFIG_USB_SERIAL_MOS7840=mCONFIG_USB_SERIAL_NAVMAN=mCONFIG_USB_SERIAL_PL2303=mCONFIG_USB_SERIAL_HP4X=mCONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not setCONFIG_USB_SERIAL_TI=mCONFIG_USB_SERIAL_CYBERJACK=mCONFIG_USB_SERIAL_XIRCOM=mCONFIG_USB_SERIAL_OPTION=mCONFIG_USB_SERIAL_OMNINET=mCONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#CONFIG_USB_EMI62=mCONFIG_USB_EMI26=mCONFIG_USB_ADUTUX=mCONFIG_USB_AUERSWALD=mCONFIG_USB_RIO500=mCONFIG_USB_LEGOTOWER=mCONFIG_USB_LCD=mCONFIG_USB_LED=mCONFIG_USB_CYPRESS_CY7C63=mCONFIG_USB_CYTHERM=mCONFIG_USB_PHIDGET=mCONFIG_USB_PHIDGETKIT=mCONFIG_USB_PHIDGETMOTORCONTROL=mCONFIG_USB_PHIDGETSERVO=mCONFIG_USB_IDMOUSE=mCONFIG_USB_FTDI_ELAN=mCONFIG_USB_APPLEDISPLAY=mCONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not setCONFIG_USB_LD=mCONFIG_USB_TEST=m
#
# USB DSL modem support
#CONFIG_USB_ATM=mCONFIG_USB_SPEEDTOUCH=mCONFIG_USB_CXACRU=mCONFIG_USB_UEAGLEATM=mCONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not setCONFIG_USB_GADGET_SELECTED=yCONFIG_USB_GADGET_NET2280=yCONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not setCONFIG_USB_GADGET_DUALSPEED=yCONFIG_USB_ZERO=mCONFIG_USB_ETH=mCONFIG_USB_ETH_RNDIS=yCONFIG_USB_GADGETFS=mCONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not setCONFIG_USB_G_SERIAL=mCONFIG_USB_MIDI_GADGET=m
#
# MMC/SD Card support
#CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not setCONFIG_MMC_BLOCK=mCONFIG_MMC_SDHCI=mCONFIG_MMC_WBSD=mCONFIG_MMC_TIFM_SD=m
#
# LED devices
#CONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_IDE_DISK=yCONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#CONFIG_INFINIBAND=mCONFIG_INFINIBAND_USER_MAD=mCONFIG_INFINIBAND_USER_ACCESS=mCONFIG_INFINIBAND_ADDR_TRANS=yCONFIG_INFINIBAND_MTHCA=mCONFIG_INFINIBAND_MTHCA_DEBUG=yCONFIG_INFINIBAND_IPATH=mCONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not setCONFIG_INFINIBAND_IPOIB=mCONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not setCONFIG_INFINIBAND_SRP=mCONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #CONFIG_EDAC=m
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not setCONFIG_EDAC_MM_EDAC=mCONFIG_EDAC_E752X=mCONFIG_EDAC_POLL=y
#
# Real Time Clock
#CONFIG_RTC_LIB=yCONFIG_RTC_CLASS=yCONFIG_RTC_HCTOSYS=yCONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=mCONFIG_RTC_INTF_PROC=mCONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#CONFIG_RTC_DRV_X1205=mCONFIG_RTC_DRV_DS1307=mCONFIG_RTC_DRV_DS1553=mCONFIG_RTC_DRV_ISL1208=mCONFIG_RTC_DRV_DS1672=mCONFIG_RTC_DRV_DS1742=mCONFIG_RTC_DRV_PCF8563=mCONFIG_RTC_DRV_PCF8583=mCONFIG_RTC_DRV_RS5C348=mCONFIG_RTC_DRV_RS5C372=mCONFIG_RTC_DRV_M48T86=mCONFIG_RTC_DRV_TEST=mCONFIG_RTC_DRV_MAX6902=mCONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#CONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
#
# CONFIG_EDD is not setCONFIG_DELL_RBU=mCONFIG_DCDBAS=m
#
# File systems
#CONFIG_EXT2_FS=mCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=mCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_JBD=m
# CONFIG_JBD_DEBUG is not setCONFIG_FS_MBCACHE=mCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not setCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=yCONFIG_JFS_FS=mCONFIG_JFS_POSIX_ACL=yCONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not setCONFIG_JFS_STATISTICS=yCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_SECURITY=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=yCONFIG_GFS2_FS=mCONFIG_GFS2_FS_LOCKING_NOLOCK=mCONFIG_GFS2_FS_LOCKING_DLM=mCONFIG_OCFS2_FS=mCONFIG_OCFS2_DEBUG_MASKLOG=yCONFIG_MINIX_FS=mCONFIG_ROMFS_FS=mCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=yCONFIG_QUOTA=yCONFIG_QFMT_V1=mCONFIG_QFMT_V2=mCONFIG_QUOTACTL=yCONFIG_DNOTIFY=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=mCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=mCONFIG_MSDOS_FS=mCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=yCONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not setCONFIG_AFFS_FS=mCONFIG_ECRYPT_FS=mCONFIG_HFS_FS=mCONFIG_HFSPLUS_FS=mCONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not setCONFIG_BFS_FS=mCONFIG_EFS_FS=mCONFIG_JFFS_FS=mCONFIG_JFFS_FS_VERBOSE=0CONFIG_JFFS_PROC_FS=yCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not setCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not setCONFIG_CRAMFS=yCONFIG_VXFS_FS=mCONFIG_HPFS_FS=mCONFIG_QNX4FS_FS=mCONFIG_SYSV_FS=mCONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
#CONFIG_NFS_FS=mCONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not setCONFIG_NFS_V4=yCONFIG_NFS_DIRECTIO=yCONFIG_NFSD=mCONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not setCONFIG_NFSD_V4=yCONFIG_NFSD_TCP=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=mCONFIG_RPCSEC_GSS_SPKM3=mCONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not setCONFIG_CIFS=mCONFIG_CIFS_STATS=yCONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=yCONFIG_CIFS_UPCALL=yCONFIG_NCP_FS=mCONFIG_NCPFS_PACKET_SIGNING=yCONFIG_NCPFS_IOCTL_LOCKING=yCONFIG_NCPFS_STRONG=yCONFIG_NCPFS_NFS_NS=yCONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not setCONFIG_NCPFS_NLS=yCONFIG_NCPFS_EXTRAS=yCONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not setCONFIG_AFS_FS=mCONFIG_RXRPC=mCONFIG_9P_FS=mCONFIG_GENERIC_ACL=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=y
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="cp437"CONFIG_NLS_CODEPAGE_437=mCONFIG_NLS_CODEPAGE_737=mCONFIG_NLS_CODEPAGE_775=mCONFIG_NLS_CODEPAGE_850=mCONFIG_NLS_CODEPAGE_852=mCONFIG_NLS_CODEPAGE_855=mCONFIG_NLS_CODEPAGE_857=mCONFIG_NLS_CODEPAGE_860=mCONFIG_NLS_CODEPAGE_861=mCONFIG_NLS_CODEPAGE_862=mCONFIG_NLS_CODEPAGE_863=mCONFIG_NLS_CODEPAGE_864=mCONFIG_NLS_CODEPAGE_865=mCONFIG_NLS_CODEPAGE_866=mCONFIG_NLS_CODEPAGE_869=mCONFIG_NLS_CODEPAGE_936=mCONFIG_NLS_CODEPAGE_950=mCONFIG_NLS_CODEPAGE_932=mCONFIG_NLS_CODEPAGE_949=mCONFIG_NLS_CODEPAGE_874=mCONFIG_NLS_ISO8859_8=mCONFIG_NLS_CODEPAGE_1250=mCONFIG_NLS_CODEPAGE_1251=mCONFIG_NLS_ASCII=mCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=mCONFIG_NLS_ISO8859_3=mCONFIG_NLS_ISO8859_4=mCONFIG_NLS_ISO8859_5=mCONFIG_NLS_ISO8859_6=mCONFIG_NLS_ISO8859_7=mCONFIG_NLS_ISO8859_9=mCONFIG_NLS_ISO8859_13=mCONFIG_NLS_ISO8859_14=mCONFIG_NLS_ISO8859_15=mCONFIG_NLS_KOI8_R=mCONFIG_NLS_KOI8_U=mCONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Instrumentation Support
#CONFIG_PROFILING=yCONFIG_OPROFILE=mCONFIG_KPROBES=y
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_LOG_BUF_SHIFT=15CONFIG_DEBUG_FS=yCONFIG_UNWIND_INFO=yCONFIG_STACK_UNWIND=y
# CONFIG_LKDTM is not set
#
# Security options
#CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set CONFIG_SECURITY=yCONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y CONFIG_SECURITY_CAPABILITIES=m CONFIG_SECURITY_ROOTPLUG=m CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX=y CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX_VALUE=19
#
# Cryptographic options
#CONFIG_CRYPTO=yCONFIG_CRYPTO_ALGAPI=yCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_HASH=yCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_HMAC=yCONFIG_CRYPTO_NULL=mCONFIG_CRYPTO_MD4=mCONFIG_CRYPTO_MD5=yCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=mCONFIG_CRYPTO_SHA512=mCONFIG_CRYPTO_WP512=mCONFIG_CRYPTO_TGR192=mCONFIG_CRYPTO_ECB=mCONFIG_CRYPTO_CBC=mCONFIG_CRYPTO_DES=mCONFIG_CRYPTO_BLOWFISH=mCONFIG_CRYPTO_TWOFISH=mCONFIG_CRYPTO_TWOFISH_COMMON=mCONFIG_CRYPTO_TWOFISH_X86_64=mCONFIG_CRYPTO_SERPENT=mCONFIG_CRYPTO_AES=mCONFIG_CRYPTO_AES_X86_64=mCONFIG_CRYPTO_CAST5=mCONFIG_CRYPTO_CAST6=mCONFIG_CRYPTO_TEA=mCONFIG_CRYPTO_ARC4=mCONFIG_CRYPTO_KHAZAD=mCONFIG_CRYPTO_ANUBIS=mCONFIG_CRYPTO_DEFLATE=mCONFIG_CRYPTO_MICHAEL_MIC=mCONFIG_CRYPTO_CRC32C=mCONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
#
# Library routines
#CONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC32=yCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_REED_SOLOMON=mCONFIG_REED_SOLOMON_DEC16=yCONFIG_TEXTSEARCH=yCONFIG_TEXTSEARCH_KMP=mCONFIG_TEXTSEARCH_BM=mCONFIG_TEXTSEARCH_FSM=mCONFIG_PLIST=y
Re: cpufreq not working on AMD K8 (was Re: 2.6.19-rc1: known regressions)
Quoted 16 lines · Christian
Am Mittwoch, 11. Oktober 2006 06:23 schrieb Adrian Bunk:
Quoted 8 lines · Christian
Quoted 6 lines
...
I've also noticed an infiniband related problem. I have to disable Infiniband in the config to get the kernel to compile. Can't say more since I'm not using any Infinband stuff and therefore don't need it anyway.
...Quoted 4 lines
Please send the .config for this bug.
cu
AdrianThis is the build error:
Quoted 9 lines
Kernel:
arch/x86_64/boot/bzImageis ready (#5)
MODPOST 1602 modules
WARNING: Can't handle masks in drivers/ide/pci/atiixp:FFFF05
WARNING: "to_qp_state_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined!
WARNING: "to_event_str" [drivers/infiniband/hw/amso1100/iw_c2.ko] undefined! make[1]: *** [__modpost] Fehler 1
make: *** [modules] Fehler 2
...
Thanks.
This was a known bug that was fixed in Linus' tree yesterday.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedQuoted 7 lines · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with tons of changes, and in fact since 2.6.18 took longer than normal due to me traveling (and others probably also being on vacations), it's possibly even larger than usual.
Quoted 5 lines
I think we got updates to pretty much all of the active architectures, we've got VM changes (dirty shared page tracking, for example), we've got networking, drivers, you name it. Even the shortlog and the diffstats are too big to make the kernel mailing list, but even just the summary says something:
Booted fine here, but I've got a few strange messages from the firewire subsystem that weren't present in 2.6.18. I think it marginally slows down boot up, but I could just be imagining it.
[alistair] 16:04 [~] dmesg | grep 1394
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host0: Running dma failed because Node ID is not valid
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
Signature · 5 lines
Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
ohci1394 regression in 2.6.19-rc1 (was Re: Merge window closed: v2.6.19-rc1)
Quoted 4 lines · Alistair John Strachan
Booted fine here, but I've got a few strange messages from the firewire subsystem that weren't present in 2.6.18. I think it marginally slows down boot up, but I could just be imagining it.
Quoted 8 lines
[alistair] 16:04 [~] dmesg | grep 1394
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host0: Running dma failed because Node ID is not valid
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
Thanks for the quick report. Could you please test the following, each one separately?
A. Configure PCI_MULTITHREAD_PROBE=n
B. Revert patch "Initialize ieee1394 early when built in"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=8df4083c5291b3647e0381d3c69ab2196f5dd3b7
I don't see how any other ohci1394 patch after 2.6.18 could lead up to that message. I also don't understand what causes this glitch. At least it seems recoverable, according to the "Host added" lines.
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- --=-= http://arcgraph.de/sr/
Re: ohci1394 regression in 2.6.19-rc1 (was Re: Merge window closed: v2.6.19-rc1)
Quoted 16 lines · Stefan Richter
Quoted 4 lines · Alistair John Strachan
Booted fine here, but I've got a few strange messages from the firewire subsystem that weren't present in 2.6.18. I think it marginally slows down boot up, but I could just be imagining it.
Quoted 10 lines
[alistair] 16:04 [~] dmesg | grep 1394
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[dffff000-dffff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[dfffc000-dfffc7ff] Max Packet=[2048] IR/IT contexts=[4/8]
ohci1394: fw-host0: Running dma failed because Node ID is not valid
ohci1394: fw-host0: AT dma reset ctx=0, aborting transmission
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting...
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0091023fd7]
ieee1394: Host added: ID:BUS[1-00:1023] GUID[000129200003d023]
Quoted 4 lines
Thanks for the quick report. Could you please test the following, each one separately?
A. Configure PCI_MULTITHREAD_PROBE=n
Not set.
Quoted 3 lines
B. Revert patch "Initialize ieee1394 early when built in"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
itdiff_plain;h=8df4083c5291b3647e0381d3c69ab2196f5dd3b7
Firewire isn't built in. I assume therefore this would have no effect.
Quoted 3 lines
I don't see how any other ohci1394 patch after 2.6.18 could lead up to that message. I also don't understand what causes this glitch. At least it seems recoverable, according to the "Host added" lines.
I haven't tried to use it, but I agree that the outcome is similar. I recompiled with excessive debug output on 2.6.19-rc1, and uploaded the configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As you can see, 2.6.18 does not exhibit any problems.
Signature · 5 lines
Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Re: ohci1394 regression in 2.6.19-rc1 (was Re: Merge window closed: v2.6.19-rc1)
On Thursday 05 October 2006 21:30, Alistair John Strachan wrote:
[snip]
Quoted 4 lines
I haven't tried to use it, but I agree that the outcome is similar. I recompiled with excessive debug output on 2.6.19-rc1, and uploaded the configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As you can see, 2.6.18 does not exhibit any problems.
Forgetting the URL; apologies:
http://devzero.co.uk/~alistair/ieee1394/
Signature · 5 lines
Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Re: ohci1394 regression in 2.6.19-rc1 (was Re: Merge window closed: v2.6.19-rc1)
Quoted 10 lines · Alistair John Strachan
On Thursday 05 October 2006 21:30, Alistair John Strachan wrote:
[snip]Quoted 4 lines
I haven't tried to use it, but I agree that the outcome is similar. I recompiled with excessive debug output on 2.6.19-rc1, and uploaded the configs for 2.6.19-rc1 and 2.6.18, and the corresponding dmesg outputs. As you can see, 2.6.18 does not exhibit any problems.
Forgetting the URL; apologies:
Thanks. From the 2.6.19-rc1 dmesg: The ieee1394 core inserts a packet before there was the first bus reset and first self ID stage completed. This shouldn't happen. Also, the packet looks a bit weird but that is probably because some base variables are still zero when this packet is sent:
[ 39.513301] ieee1394: send packet at S100: ffc00140 0000ffff f0000234
destination = ffc0: node 0 on local FireWire bus (this is the host's node; there isn't any other one anyway)
transaction label = 0: OK
retry code = 1: bogus, should be 0 as the first attempt transaction code = 4: quadlet read request (usually used "much" later by higher-level code, i.e. ieee1394's nodemgr, after self ID stage was properly completed plus a pause)
pri = 0: OK
source ID = 0000: not OK, should be ffc0 on proper packets destination offset = ffff f000 0234: this is the address of the BROADCAST_CHANNEL register (usually read "much" later by ieee1394's nodemgr to probe capabilities of an IRM: nodemgr_check_irm_capability() calls this.)
It does indeed look like the nodemgr kicked in prematurely. After some other messages from lower levels and from different contexts, there is also a sign of nodemgr_check_irm_capability() failing (it can only fail this early):
[ 40.298112] ieee1394: Current remote IRM is not 1394a-2000 compliant,
resetting...
OK. Enough with the boring details. Maybe the following patch doesn't work entirely as I intended:
"ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
I think if you revert the next patch first... "ieee1394: nodemgr: convert nodemgr_serialize semaphore to mutex"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=cab8d154e2ed43fe1495aa0e18103e747552891b
...you can then revert the 'switch to kthread' patch and see if the message "Running dma failed because Node ID is not valid" disappears. Would be nice if you could test that.
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- --=-= http://arcgraph.de/sr/
Re: ohci1394 regression in 2.6.19-rc1 (was Re: Merge window closed: v2.6.19-rc1)
On Thursday 05 October 2006 23:16, Stefan Richter wrote:
[snip]
Quoted 14 lines
It does indeed look like the nodemgr kicked in prematurely. After some other messages from lower levels and from different contexts, there is also a sign of
nodemgr_check_irm_capability()failing (it can only fail this early):[ 40.298112] ieee1394: Current remote IRM is not 1394a-2000 compliant,resetting...
OK. Enough with the boring details. Maybe the following patch doesn't work entirely as I intended:
"ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
itdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
Quoted 8 lines
I think if you revert the next patch first... "ieee1394: nodemgr: convert
nodemgr_serializesemaphore to mutex"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=comm
itdiff_plain;h=cab8d154e2ed43fe1495aa0e18103e747552891b...you can then revert the 'switch to kthread' patch and see if the message "Running dma failed because Node ID is not valid" disappears. Would be nice if you could test that.
Of course. I tried reverting these two, and it has not helped.
-rw-r--r-- 1 root root 562133 2006-10-05 23:29 kernel/drivers/ieee1394/ieee1394.ko
(KBUILD only regenerated this file, I hope that's correct.)
http://devzero.co.uk/~alistair/ieee1394/dmesg-2.6.19-rc1-reverts.gz
Signature · 5 lines
Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Re: ohci1394 regression in 2.6.19-rc1
Quoted 6 lines · Alistair John Strachan
Quoted 3 lines · Stefan Richter
...you can then revert the 'switch to kthread' patch and see if the message "Running dma failed because Node ID is not valid" disappears. Would be nice if you could test that.
Of course. I tried reverting these two, and it has not helped.
Thanks.
Quoted 3 lines
-rw-r--r-- 1 root root 562133 2006-10-05 23:29
kernel/drivers/ieee1394/ieee1394.ko(KBUILD only regenerated this file, I hope that's correct.)
Yes.
One more thing you could to try if you can spare the time:
Build and boot Linux _2.6.18_ after applying this patchkit:
http://me.in-berlin.de/~s5r6/linux1394/updates/
This is only little more of 1394 stuff than what is now in 2.6.19-rc1.
This test would at least give a hint if changes sent via the linux1394 git tree are the culprit, or some change from outside.
In case you are familiar with quilt, take the quilt variant of the patchkit instead of the collapsed patch. Short instructions on the patchkits are on the website. The quilt patchset would allow to hunt down the bad patch by bisection --- if the bad one is among the 1394 updates in the first place.
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- --==- http://arcgraph.de/sr/
Re: ohci1394 regression in 2.6.19-rc1
Quoted 3 lines · I wrote:
One more thing you could to try if you can spare the time:
Build and boot Linux _2.6.18_ after applying this patchkit:
Not necessary anymore.
I saw the messages and the delay that you described now too, using Linux 2.6.18 + all IEEE 1394 updates. I will continue to narrow the cause down.
Thanks,
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- --==- http://arcgraph.de/sr/
Re: ohci1394 regression in 2.6.19-rc1
Quoted 2 lines · I wrote:
I saw the messages and the delay that you described now too, using Linux 2.6.18 + all IEEE 1394 updates. I will continue to narrow the cause down.
It's as I suspected:
"ieee1394: nodemgr: switch to kthread api, replace reset semaphore"
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff_plain;h=d2f119fe319528da8c76a1107459d6f478cbf28c
Before that, I get a selfID-complete event, then nodemgr starts its work. After that its the reverse, which lets nodemgr inject a packet before the bus is completely ready. (So it's actually a regression in ieee1394 core's high-level functions, not in ohci1394. And it's harmless.)
I will post when I have a fix.
Signature · 3 lines
Stefan Richter -=====-=-==- =-=- --==- http://arcgraph.de/sr/
Re: ohci1394 regression in 2.6.19-rc1
Alistair, could you please test the following one-liner on top of 2.6.19-rc1?
-----------------
Date: Fri, 6 Oct 2006 19:49:52 +0200 (CEST)
From: Stefan Richter <[email protected]>
Subject: ieee1394: nodemgr: fix startup of knodemgrd
Revert a thinko in commit d2f119fe319528da8c76a1107459d6f478cbf28c:
When knodemgrd starts, it needs to sleep until host->generation was incremented above its initial value of 0. My wrong logic caused it to start sending requests when the bus wasn't completely ready. Seen as "AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1.
---
drivers/ieee1394/nodemgr.c +1 -1
@@ -1614,7 +1614,7 @@ static int nodemgr_host_thread(void *__h {struct host_info *hi = (struct host_info *)__hi;struct hpsb_host *host = hi->host; -unsigned int g, generation =get_hpsb_generation (host) -1 ; +unsigned int g, generation =0 ;int i, reset_cycles =0 ;/* Setup our device-model entries */
Re: ohci1394 regression in 2.6.19-rc1
Quoted 2 lines · Stefan Richter
Alistair, could you please test the following one-liner on top of 2.6.19-rc1?
Thanks Stefan, this fixes everything.
I'm puzzled and annoyed that I wasn't able to observe the same behaviour you were with the mentioned patches reverted, I'm certain I did it correctly.. just as well you tried it.
Signature · 5 lines
Cheers, Alistair. Final year Computer Science undergraduate. 1F2 55 South Clerk Street, Edinburgh, UK.
Quoted 23 lines · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with tons of changes, and in fact since 2.6.18 took longer than normal due to me traveling (and others probably also being on vacations), it's possibly even larger than usual.
I think we got updates to pretty much all of the active architectures, we've got VM changes (dirty shared page tracking, for example), we've got networking, drivers, you name it. Even the shortlog and the diffstats are too big to make the kernel mailing list, but even just the summary says something:
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)so please give it a good testing, and let's see if there are any regressions.
As usual, the best way to get some grip on a particular subsystem would tend to be with some script like
Quoted 7 lines
git log --no-merges v2.6.18..
drivers/usb| git shortlog | less -Swhich gives a more manageable overview of any particular area you're interested in (in the example that would be '
drivers/usb', but you can use this to browse any interesting area).Linus
I had to rebuild it 2 extra times to get all the options right, partially my fault. But once my usual .config was achieved, it back to business as usual, complete with my logs being littered with this message:
Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB device using
ohci_hcd and address 3
This is my only (so far) minor nit to pick.
[root@coyote linux-2.6.19-rc1]# lsusb
[...]
Bus 003 Device 003: ID 045e:008c Microsoft Corp.
[...]
Now, I'd assume its referring to my mouse, the Microsoft Corp entry above, which has had a fresh set of batteries installed without effecting this, and I even removed the batteries from another usb/bluetooth mouse I use on my lappy when its powered up, all without effecting this apparently innocuous error as the mouse itself works just fine. The receiver is about 3 feet away as the tower is at least 5 feet away, under an adjacent desk.
This started at about the same time I jumped from a 2.6.16-something to the 2nd rc of 2.6.18, and has continued more or less un-abated since. Doing a reset/reconfigure on the mouse and base station does not appear to generate any log messages, nor to effect the random logging of the above messages.
Does anyone have a suggestion?
Signature · 7 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
usb resets [Was Re: Merge window closed: v2.6.19-rc1]
Hello,
Quoted 4 lines · Gene Heskett
But once my usual .config was achieved, it back to business as usual, complete with my logs being littered with this message:
Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB device using
Quoted 8 lines
ohci_hcdand address 3This is my only (so far) minor nit to pick.
[root@coyote linux-2.6.19-rc1]# lsusb
[...]
Bus 003 Device 003: ID 045e:008c Microsoft Corp.
[...]
I saw that, too. But I have
zeisberg@cepheus:~$ lsusb
Bus 001 Device 002: ID 046d:c00b Logitech, Inc. MouseMan Wheel
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000 And whenever the reset occured, my keyboard produced mulitple key events when a key was pressed.
And since I didn't connect my usb cardreader anymore, the problem disapeared. (Yes, it is not listed above. I'll try to find the time to do some further testing.)
Quoted 2 lines
This started at about the same time I jumped from a 2.6.16-something to the 2nd rc of 2.6.18
Same for me. (But at the same time I upgraded my machine from a Duron 600 to a Pentium D 940. So I thought it has to do with that.)
Best regards
Uwe
Signature · 3 lines
Uwe Zeisberger $ dc -e "5735816763073014741799356604682P"
Re: usb resets [Was Re: Merge window closed: v2.6.19-rc1]
Quoted 25 lines · Uwe Zeisberger
Hello,
Quoted 4 lines · Gene Heskett
But once my usual .config was achieved, it back to business as usual, complete with my logs being littered with this message:
Oct 5 11:14:40 coyote kernel: usb 3-2.1: reset low speed USB deviceQuoted 8 lines
using
ohci_hcdand address 3This is my only (so far) minor nit to pick.
[root@coyote linux-2.6.19-rc1]# lsusb
[...]
Bus 003 Device 003: ID 045e:008c Microsoft Corp.
[...]I saw that, too. But I have
zeisberg@cepheus:~$ lsusb Bus 001 Device 002: ID 046d:c00b Logitech, Inc. MouseMan Wheel Bus 001 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000
Quoted 3 lines
And whenever the reset occured, my keyboard produced mulitple key events when a key was pressed.
My keyboard, a ps2 microsoftie thats about got the legends worn from the keycaps, has not exhibited any such behaviour.
Quoted 9 lines
And since I didn't connect my usb cardreader anymore, the problem disapeared. (Yes, it is not listed above. I'll try to find the time to do some further testing.)
Quoted 2 lines
This started at about the same time I jumped from a 2.6.16-something to the 2nd rc of 2.6.18
Same for me. (But at the same time I upgraded my machine from a Duron 600 to a Pentium D 940. So I thought it has to do with that.)
No hardware updates here recently, the most recent addition being a wap11 for my lappy. And I believe that was up and running for at least 2 months before this started. Mobo is an older (now) biostar, gig of ram, XP-2800 Athlon, 333 fsb. Accessory 4 port usb1.1 hub in front panel for usb expansion. 7 usb devices total. But only 5 are alive ATM, and one of those doesn't properly ID itself, a pl2303 usb-seriel adaptor thats plugged in but not in use. $40 and it doesn't honor flow control either style or way.
Thanks Uwe.
Signature · 7 lines
Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2006 by Maurice Eugene Heskett, all rights reserved.
Quoted 1 line · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
...
Quoted 2 lines
so please give it a good testing, and let's see if there are any regressions.
The UDF filesystem can't be mounted in read-write mode any more, because of forgotten braces.
---
fs/udf/super.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-)
fs/udf/super.c +2 -1
@@ -1621,9 +1621,10 @@ #endif goto error_out; } -if (UDF_SB_PARTFLAGS (sb,UDF_SB_PARTITION (sb)) &UDF_PART_FLAG_READ_ONLY ) +if (UDF_SB_PARTFLAGS (sb,UDF_SB_PARTITION (sb)) &UDF_PART_FLAG_READ_ONLY ) {printk ("UDF-fs: Partition marked readonly; forcing readonly mount\n" ); sb->s_flags |=MS_RDONLY ; + }if (udf_find_fileset (sb, &fileset, &rootdir) ) {
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
Quoted 9 lines · Peter Osterlund
Quoted 1 line · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
...
Quoted 2 lines
so please give it a good testing, and let's see if there are any regressions.
The UDF filesystem can't be mounted in read-write mode any more, because of forgotten braces.
Urgh.
Thanks...
-Eric
PATCH 1/1 fix qla{2,4} build error
In reply to Linus TorvaldsQuoted 2 lines · Linus Torvalds
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)
commit 0181944fe647cae18d545ac1167df3d15d393701 adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too.
Trying to build both drivers results in the following error:
LD drivers/scsi/built-in.o
drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
first defined here
make[2]: *** [drivers/scsi/built-in.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
The following patch simply adds a qla2_ (qla4_ respectively) prefix to the variable name.
Regards,
Frederik
drivers/scsi/qla2xxx/qla_dbg.h +7 -7
@@ -38,7 +38,7 @@ #endif* Macros use for debugging the driver. */ -#define DEBUG (x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG (x) do { if (qla2_extended_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_1 )#define DEBUG1 (x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else#define DEBUG1 (x) do {} while (0)#endif -#define DEBUG2 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_3 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_3_11 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_9_10 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_11 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_13 (x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2_3 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2_3_11 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2_9_10 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2_11 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2_13 (x) do { if (qla2_extended_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_3 )#define DEBUG3 (x) do {x;} while (0)
drivers/scsi/qla2xxx/qla_gbl.h +1 -1
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;extern int ql2xloginretrycount;extern int ql2xfdmienable;extern int ql2xallocfwdump; -extern int extended_error_logging; +extern int qla2_extended_error_logging;extern void qla2x00_sp_compl (scsi_qla_host_t *,srb_t *);
drivers/scsi/qla2xxx/qla_init.c +1 -1
@@ -1644,7 +1644,7 @@ #endif* Set host adapter parameters. */ if (nv->host_p[0 ] &BIT_7 ) - extended_error_logging =1 ; + qla2_extended_error_logging =1 ; ha->flags.disable_risc_code_load = ((nv->host_p[0 ] &BIT_4 ) ?1 :0 );/* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100 (ha) && !IS_QLA2200 (ha))
drivers/scsi/qla2xxx/qla_os.c +4 -4
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,"during HBA initialization. Memory allocation requirements " "vary by ISP type. Default is 1 - allocate memory."); -int extended_error_logging; -module_param (extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (extended_error_logging, +int qla2_extended_error_logging; +module_param (qla2_extended_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (qla2_extended_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging. 1 - log errors." );
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)/* Derive version string. */ strcpy (qla2x00_version_str,QLA2XXX_VERSION ); -if (extended_error_logging) +if (qla2_extended_error_logging)strcat (qla2x00_version_str,"-debug" ); qla2xxx_transport_template =
drivers/scsi/qla4xxx/ql4_dbg.h +2 -2
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);#endif #if defined(QL_DEBUG_LEVEL_2 ) -#define DEBUG2 (x) do {if(extended_error_logging == 2) x;} while (0); +#define DEBUG2 (x) do {if(qla4_extended_error_logging == 2) x;} while (0);#define DEBUG2_3 (x) do {x;} while (0);#else /* */ #define DEBUG2 (x) do {} while (0);#endif /* */ #if defined(QL_DEBUG_LEVEL_3 ) -#define DEBUG3 (x) do {if(extended_error_logging == 3) x;} while (0); +#define DEBUG3 (x) do {if(qla4_extended_error_logging == 3) x;} while (0);#else /* */ #define DEBUG3 (x) do {} while (0);#if !defined(QL_DEBUG_LEVEL_2 )
drivers/scsi/qla4xxx/ql4_glbl.h +1 -1
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(structint qla4xxx_process_ddb_changed (struct scsi_qla_host * ha,uint32_t fw_ddb_index,uint32_t state); -extern int extended_error_logging; +extern int qla4_extended_error_logging;extern int ql4xdiscoverywait;extern int ql4xdontresethba;#endif /* _QLA4x_GBL_H */
drivers/scsi/qla4xxx/ql4_mbx.c +1 -1
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct sDEBUG3 (printk ("scsi%ld: Connection Event Log Dump (%d entries):\n" , ha->host_no, num_valid_entries)); -if (extended_error_logging ==3 ) { +if (qla4_extended_error_logging ==3 ) {if (oldest_entry ==0 ) {/* Circular Buffer has not wrapped around */ for (i=0 ; i < num_valid_entries; i++) {
drivers/scsi/qla4xxx/ql4_os.c +4 -4
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba," default it will reset hba :0" " set to 1 to avoid resetting HBA"); -int extended_error_logging =0 ;/* 0 = off, 1 = log errors */ -module_param (extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (extended_error_logging, +int qla4_extended_error_logging =0 ;/* 0 = off, 1 = log errors */ +module_param (qla4_extended_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (qla4_extended_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging, 1 - debug logging" );
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo/* Derive version string. */ strcpy (qla4xxx_version_str,QLA4XXX_DRIVER_VERSION ); -if (extended_error_logging) +if (qla4_extended_error_logging)strcat (qla4xxx_version_str,"-debug" ); qla4xxx_scsi_transport =
Re: [patch] fix qla{2,4} build error
Quoted 19 lines · Frederik Deweerdt
Quoted 2 lines · Linus Torvalds
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)commit
0181944fe647cae18d545ac1167df3d15d393701adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too.
Trying to build both drivers results in the following error:LD
drivers/scsi/built-in.o
drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
first defined here
make[2]: *** [drivers/scsi/built-in.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
Quoted 2 lines
The following patch simply adds a
qla2_(qla4_respectively) prefix to the variable name.
Thanks for doing this, but could I suggest the following instead which will at least maintain some consistency (yes, I know it's lacking) with other qla2xxx module-parameter prefixes (ql2x and ql4x).
---
drivers/scsi/qla2xxx/qla_dbg.h +7 -7
@@ -38,7 +38,7 @@ #endif* Macros use for debugging the driver. */ -#define DEBUG (x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG (x) do { if (ql2xextened_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_1 )#define DEBUG1 (x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else#define DEBUG1 (x) do {} while (0)#endif -#define DEBUG2 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_3 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_3_11 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_9_10 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_11 (x) do { if (extended_error_logging) { x; } } while (0) -#define DEBUG2_13 (x) do { if (extended_error_logging) { x; } } while (0) +#define DEBUG2 (x) do { if (ql2xextened_error_logging) { x; } } while (0) +#define DEBUG2_3 (x) do { if (ql2xextened_error_logging) { x; } } while (0) +#define DEBUG2_3_11 (x) do { if (ql2xextened_error_logging) { x; } } while (0) +#define DEBUG2_9_10 (x) do { if (ql2xextened_error_logging) { x; } } while (0) +#define DEBUG2_11 (x) do { if (ql2xextened_error_logging) { x; } } while (0) +#define DEBUG2_13 (x) do { if (ql2xextened_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_3 )#define DEBUG3 (x) do {x;} while (0)
drivers/scsi/qla2xxx/qla_gbl.h +1 -1
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;extern int ql2xloginretrycount;extern int ql2xfdmienable;extern int ql2xallocfwdump; -extern int extended_error_logging; +extern int ql2xextened_error_logging;extern void qla2x00_sp_compl (scsi_qla_host_t *,srb_t *);
drivers/scsi/qla2xxx/qla_init.c +1 -1
@@ -1644,7 +1644,7 @@ #endif* Set host adapter parameters. */ if (nv->host_p[0 ] &BIT_7 ) - extended_error_logging =1 ; + ql2xextened_error_logging =1 ; ha->flags.disable_risc_code_load = ((nv->host_p[0 ] &BIT_4 ) ?1 :0 );/* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100 (ha) && !IS_QLA2200 (ha))
drivers/scsi/qla2xxx/qla_os.c +4 -4
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,"during HBA initialization. Memory allocation requirements " "vary by ISP type. Default is 1 - allocate memory."); -int extended_error_logging; -module_param (extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (extended_error_logging, +int ql2xextened_error_logging; +module_param (ql2xextened_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (ql2xextened_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging. 1 - log errors." );
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)/* Derive version string. */ strcpy (qla2x00_version_str,QLA2XXX_VERSION ); -if (extended_error_logging) +if (ql2xextened_error_logging)strcat (qla2x00_version_str,"-debug" ); qla2xxx_transport_template =
drivers/scsi/qla4xxx/ql4_dbg.h +2 -2
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);#endif #if defined(QL_DEBUG_LEVEL_2 ) -#define DEBUG2 (x) do {if(extended_error_logging == 2) x;} while (0); +#define DEBUG2 (x) do {if(ql4xextened_error_logging == 2) x;} while (0);#define DEBUG2_3 (x) do {x;} while (0);#else /* */ #define DEBUG2 (x) do {} while (0);#endif /* */ #if defined(QL_DEBUG_LEVEL_3 ) -#define DEBUG3 (x) do {if(extended_error_logging == 3) x;} while (0); +#define DEBUG3 (x) do {if(ql4xextened_error_logging == 3) x;} while (0);#else /* */ #define DEBUG3 (x) do {} while (0);#if !defined(QL_DEBUG_LEVEL_2 )
drivers/scsi/qla4xxx/ql4_glbl.h +1 -1
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(structint qla4xxx_process_ddb_changed (struct scsi_qla_host * ha,uint32_t fw_ddb_index,uint32_t state); -extern int extended_error_logging; +extern int ql4xextened_error_logging;extern int ql4xdiscoverywait;extern int ql4xdontresethba;#endif /* _QLA4x_GBL_H */
drivers/scsi/qla4xxx/ql4_mbx.c +1 -1
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct sDEBUG3 (printk ("scsi%ld: Connection Event Log Dump (%d entries):\n" , ha->host_no, num_valid_entries)); -if (extended_error_logging ==3 ) { +if (ql4xextened_error_logging ==3 ) {if (oldest_entry ==0 ) {/* Circular Buffer has not wrapped around */ for (i=0 ; i < num_valid_entries; i++) {
drivers/scsi/qla4xxx/ql4_os.c +4 -4
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba," default it will reset hba :0" " set to 1 to avoid resetting HBA"); -int extended_error_logging =0 ;/* 0 = off, 1 = log errors */ -module_param (extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (extended_error_logging, +int ql4xextened_error_logging =0 ;/* 0 = off, 1 = log errors */ +module_param (ql4xextened_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (ql4xextened_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging, 1 - debug logging" );
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo/* Derive version string. */ strcpy (qla4xxx_version_str,QLA4XXX_DRIVER_VERSION ); -if (extended_error_logging) +if (ql4xextened_error_logging)strcat (qla4xxx_version_str,"-debug" ); qla4xxx_scsi_transport =
PATCH 1/1 Maintain module-parameter name consistency with qla2xxx/qla4xxx.
---
Quoted 21 lines · Frederik Deweerdt
Quoted 20 lines · Linus Torvalds
Quoted 2 lines
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)commit
0181944fe647cae18d545ac1167df3d15d393701adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too.
Trying to build both drivers results in the following error:LD
drivers/scsi/built-in.o
drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure':
drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166:
first defined here
make[2]: *** [drivers/scsi/built-in.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2
Quoted 6 lines
Quoted 2 lines
The following patch simply adds a
qla2_(qla4_respectively) prefix to the variable name.Thanks for doing this, but could I suggest the following instead which will at least maintain some consistency (yes, I know it's lacking) with other qla2xxx module-parameter prefixes (ql2x and ql4x).
Frederik's original patch made it into Linus' tree, James please add this for the next scsi-rc-fixes.
drivers/scsi/qla2xxx/qla_dbg.h +7 -7
@@ -38,7 +38,7 @@ #endif* Macros use for debugging the driver. */ -#define DEBUG (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG (x) do { if (ql2xextended_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_1 )#define DEBUG1 (x) do {x;} while (0)
@@ -46,12 +46,12 @@ #else#define DEBUG1 (x) do {} while (0)#endif -#define DEBUG2 (x) do { if (qla2_extended_error_logging) { x; } } while (0) -#define DEBUG2_3 (x) do { if (qla2_extended_error_logging) { x; } } while (0) -#define DEBUG2_3_11 (x) do { if (qla2_extended_error_logging) { x; } } while (0) -#define DEBUG2_9_10 (x) do { if (qla2_extended_error_logging) { x; } } while (0) -#define DEBUG2_11 (x) do { if (qla2_extended_error_logging) { x; } } while (0) -#define DEBUG2_13 (x) do { if (qla2_extended_error_logging) { x; } } while (0) +#define DEBUG2 (x) do { if (ql2xextended_error_logging) { x; } } while (0) +#define DEBUG2_3 (x) do { if (ql2xextended_error_logging) { x; } } while (0) +#define DEBUG2_3_11 (x) do { if (ql2xextended_error_logging) { x; } } while (0) +#define DEBUG2_9_10 (x) do { if (ql2xextended_error_logging) { x; } } while (0) +#define DEBUG2_11 (x) do { if (ql2xextended_error_logging) { x; } } while (0) +#define DEBUG2_13 (x) do { if (ql2xextended_error_logging) { x; } } while (0)#if defined(QL_DEBUG_LEVEL_3 )#define DEBUG3 (x) do {x;} while (0)
drivers/scsi/qla2xxx/qla_gbl.h +1 -1
@@ -60,7 +60,7 @@ extern int ql2xplogiabsentdevice;extern int ql2xloginretrycount;extern int ql2xfdmienable;extern int ql2xallocfwdump; -extern int qla2_extended_error_logging; +extern int ql2xextended_error_logging;extern void qla2x00_sp_compl (scsi_qla_host_t *,srb_t *);
drivers/scsi/qla2xxx/qla_init.c +1 -1
@@ -1644,7 +1644,7 @@ #endif* Set host adapter parameters. */ if (nv->host_p[0 ] &BIT_7 ) - qla2_extended_error_logging =1 ; + ql2xextended_error_logging =1 ; ha->flags.disable_risc_code_load = ((nv->host_p[0 ] &BIT_4 ) ?1 :0 );/* Always load RISC code on non ISP2[12]00 chips. */ if (!IS_QLA2100 (ha) && !IS_QLA2200 (ha))
drivers/scsi/qla2xxx/qla_os.c +4 -4
@@ -61,9 +61,9 @@ MODULE_PARM_DESC(ql2xallocfwdump,"during HBA initialization. Memory allocation requirements " "vary by ISP type. Default is 1 - allocate memory."); -int qla2_extended_error_logging; -module_param (qla2_extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (qla2_extended_error_logging, +int ql2xextended_error_logging; +module_param (ql2xextended_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (ql2xextended_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging. 1 - log errors." );
@@ -2697,7 +2697,7 @@ qla2x00_module_init(void)/* Derive version string. */ strcpy (qla2x00_version_str,QLA2XXX_VERSION ); -if (qla2_extended_error_logging) +if (ql2xextended_error_logging)strcat (qla2x00_version_str,"-debug" ); qla2xxx_transport_template =
drivers/scsi/qla4xxx/ql4_dbg.h +2 -2
@@ -22,14 +22,14 @@ #define DEBUG(x) do {} while (0);#endif #if defined(QL_DEBUG_LEVEL_2 ) -#define DEBUG2 (x) do {if(qla4_extended_error_logging == 2) x;} while (0); +#define DEBUG2 (x) do {if(ql4xextended_error_logging == 2) x;} while (0);#define DEBUG2_3 (x) do {x;} while (0);#else /* */ #define DEBUG2 (x) do {} while (0);#endif /* */ #if defined(QL_DEBUG_LEVEL_3 ) -#define DEBUG3 (x) do {if(qla4_extended_error_logging == 3) x;} while (0); +#define DEBUG3 (x) do {if(ql4xextended_error_logging == 3) x;} while (0);#else /* */ #define DEBUG3 (x) do {} while (0);#if !defined(QL_DEBUG_LEVEL_2 )
drivers/scsi/qla4xxx/ql4_glbl.h +1 -1
@@ -72,7 +72,7 @@ int qla4xxx_reinitialize_ddb_list(structint qla4xxx_process_ddb_changed (struct scsi_qla_host * ha,uint32_t fw_ddb_index,uint32_t state); -extern int qla4_extended_error_logging; +extern int ql4xextended_error_logging;extern int ql4xdiscoverywait;extern int ql4xdontresethba;#endif /* _QLA4x_GBL_H */
drivers/scsi/qla4xxx/ql4_mbx.c +1 -1
@@ -701,7 +701,7 @@ void qla4xxx_get_conn_event_log(struct sDEBUG3 (printk ("scsi%ld: Connection Event Log Dump (%d entries):\n" , ha->host_no, num_valid_entries)); -if (qla4_extended_error_logging ==3 ) { +if (ql4xextended_error_logging ==3 ) {if (oldest_entry ==0 ) {/* Circular Buffer has not wrapped around */ for (i=0 ; i < num_valid_entries; i++) {
drivers/scsi/qla4xxx/ql4_os.c +4 -4
@@ -34,9 +34,9 @@ MODULE_PARM_DESC(ql4xdontresethba," default it will reset hba :0" " set to 1 to avoid resetting HBA"); -int qla4_extended_error_logging =0 ;/* 0 = off, 1 = log errors */ -module_param (qla4_extended_error_logging, int,S_IRUGO |S_IRUSR ); -MODULE_PARM_DESC (qla4_extended_error_logging, +int ql4xextended_error_logging =0 ;/* 0 = off, 1 = log errors */ +module_param (ql4xextended_error_logging, int,S_IRUGO |S_IRUSR ); +MODULE_PARM_DESC (ql4xextended_error_logging,"Option to enable extended error logging, " "Default is 0 - no logging, 1 - debug logging" );
@@ -1714,7 +1714,7 @@ static int __init qla4xxx_module_init(vo/* Derive version string. */ strcpy (qla4xxx_version_str,QLA4XXX_DRIVER_VERSION ); -if (qla4_extended_error_logging) +if (ql4xextended_error_logging)strcat (qla4xxx_version_str,"-debug" ); qla4xxx_scsi_transport =
monitor not active after boot (was Re: Merge window closed: v2.6.19-rc1)
In reply to Linus TorvaldsIf my monitor is off during boot and I turn it on once KDE is fully started, the screen remains black. If it stays on during boot, X will work ok. This happens on a G5 with ' nVidia Corporation NV43 [GeForce 6600] (rev a2)' The i2c errors are new.
...
nvidiafb: Device ID: 10de0141
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog found
ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... i2c_adapter i2c-0: unable to read EDID block.i2c_adapter i2c-0: unable to read EDID block.
ieee1394: Error parsing configrom for node 0-01:1023 i2c_adapter i2c-0: unable to read EDID block.
nvidiafb: Found OF EDID for head 1
nvidiafb: EDID found from BUS1
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
Console: switching to colour frame buffer device 128x48
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0x90000000)
...
346bc21026e7a92e1d7a4a1b3792c5e8b686133d is first bad commit
diff-tree 346bc21026e7a92e1d7a4a1b3792c5e8b686133d (from fc5891c8a3ba284f13994d7bc1f1bfa8283982de)
Author: Antonino A. Daplas <[email protected]> Date: Tue Oct 3 01:14:43 2006 -0700
[PATCH] nvidiafb: Use generic DDC reading
Update driver to use generic DDC reading
:040000 040000 f20a7c1e3ce7d97a4b6e9bcde25b24685aeaabe4 9383ef67e1f4525eaaecd7d3c54685dea997dffc M drivers
git-bisect start
# bad: [d223a60106891bfe46febfacf46b20cd8509aaad] Linux 2.6.19-rc1
git-bisect bad d223a60106891bfe46febfacf46b20cd8509aaad
# good: [119248f4578ca60b09c20893724e10f19806e6f1] Linux v2.6.18. Arrr!
git-bisect good 119248f4578ca60b09c20893724e10f19806e6f1
# good: [ac7f6b5e44cb0982b98c31fa33298ba73fb5dcfc] Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev git-bisect good ac7f6b5e44cb0982b98c31fa33298ba73fb5dcfc
# good: [82965addad66fce61a92c5f03104ea90b0b87124] Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart git-bisect good 82965addad66fce61a92c5f03104ea90b0b87124
# bad: [c53c1bb94f30cecee79ca0a8e9977640338283be] knfsd: lockd: Add nlm_destroy_host
git-bisect bad c53c1bb94f30cecee79ca0a8e9977640338283be
# bad: [2dc350283d3ea194c954428d86025190cab47366] drivers/video/sis/sis_accel.h: removal of old code
git-bisect bad 2dc350283d3ea194c954428d86025190cab47366
# good: [a12f66fccf2e266ad197df142b5ebafc6a169a8c] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
git-bisect good a12f66fccf2e266ad197df142b5ebafc6a169a8c
# good: [829d464e60151a525c7ba57e7acfc4fc297f7069] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband
git-bisect good 829d464e60151a525c7ba57e7acfc4fc297f7069
# good: [14e0a193209aeea810ad3d66388f422dc79c5b40] ide: fix revision comparison in ide_in_drive_list
git-bisect good 14e0a193209aeea810ad3d66388f422dc79c5b40
# bad: [bf5df0a2c54c2dc0fad619ac25d029119023610a] rivafb: Use generic DDC reading
git-bisect bad bf5df0a2c54c2dc0fad619ac25d029119023610a
# good: [a4bea10eca68152e84ffc4eaeb9d20ec2ac34664] Allow ide_generic_all to be used modular and built in
git-bisect good a4bea10eca68152e84ffc4eaeb9d20ec2ac34664
# good: [535a09ad59286b7675ffbf8b51d8ecb001c44386] rivafb: use constants instead of magic values
git-bisect good 535a09ad59286b7675ffbf8b51d8ecb001c44386
# good: [fc5891c8a3ba284f13994d7bc1f1bfa8283982de] fbdev: Add generic ddc read functionality
git-bisect good fc5891c8a3ba284f13994d7bc1f1bfa8283982de
# bad: [346bc21026e7a92e1d7a4a1b3792c5e8b686133d] nvidiafb: Use generic DDC reading
git-bisect bad 346bc21026e7a92e1d7a4a1b3792c5e8b686133d
Re: monitor not active after boot (was Re: Merge window closed: v2.6.19-rc1)
Quoted 4 lines · Olaf Hering
If my monitor is off during boot and I turn it on once KDE is fully started, the screen remains black. If it stays on during boot, X will work ok. This happens on a G5 with ' nVidia Corporation NV43 [GeForce 6600] (rev a2)' The i2c errors are new.
I dont know how Xorg gets the EDID data. There is no difference in dmesg output with monitor on/off. But the Xorg.0.log shows:
@@ -772,49 +772,13 @@
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) NV(0): I2C device "DDC:ddc2" removed.
-(--) NV(0): DDC detected a CRT:
-(II) NV(0): Manufacturer: ACT Model: f1b Serial#: 8016154 -(II) NV(0): Year: 1998 Week: 9
-(II) NV(0): EDID Version: 1.0
-(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V -(II) NV(0): Sync: Separate Composite
-(II) NV(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21 -(II) NV(0): Gamma: 2.00
-(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
-(II) NV(0): redX: 0.625 redY: 0.339 greenX: 0.301 greenY: 0.599
-(II) NV(0): blueX: 0.141 blueY: 0.065 whiteX: 0.281 whiteY: 0.310
-(II) NV(0): Supported VESA Video Modes:
-(II) NV(0): 720x400@70Hz
-(II) NV(0): 640x480@60Hz
-(II) NV(0): 640x480@75Hz
-(II) NV(0): 800x600@60Hz
-(II) NV(0): 800x600@75Hz
-(II) NV(0): 1024x768@60Hz
-(II) NV(0): 1024x768@70Hz
-(II) NV(0): 1024x768@75Hz
-(II) NV(0): Manufacturer's mask: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 36.0 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 640 h_sync: 696 h_sync_end 752 h_blank_end 832 h_border: 0 -(II) NV(0): v_active: 480 v_sync: 481 v_sync_end 484 v_blanking: 509 v_border: 0 -(II) NV(0): Supported additional Video Mode: -(II) NV(0): clock: 56.2 MHz Image Size: 280 x 210 mm -(II) NV(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0 -(II) NV(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
-(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 94.5 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0 -(II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0 -(II) NV(0): Supported additional Video Mode:
-(II) NV(0): clock: 108.0 MHz Image Size: 280 x 210 mm
-(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 -(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
+(II) NV(0): ... none found
(--) NV(0): CRTC 0 appears to have a CRT attached
(II) NV(0): Using CRT on CRTC 0
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
-(II) NV(0): Monitor[0]: Using default hsync range of 43.26-68.68 kHz -(II) NV(0): Monitor[0]: Using default vrefresh range of 60.01-85.06 Hz +(II) NV(0): Monitor[0]: Using default hsync range of 28.00-33.00 kHz +(II) NV(0): Monitor[0]: Using default vrefresh range of 43.00-72.00 Hz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (hsync out of range) (II) NV(0): Not using default mode "320x175" (hsync out of range)
The root cause may be that Xorg nv can not handle 640x480@xx at all on this card, or this monitor. It works ok in OSX.
Also turning the monitor off while in yaboot doesnt help.
tree -f /sys shows also no difference.
Quoted 2 lines · Linus Torvalds
so please give it a good testing, and let's see if there are any regressions.
it breaks suspend when the airo module is loaded:
kernel: Stopping tasks: ================================================================================= kernel: stopping tasks timed out after 20 seconds (1 tasks remaining): kernel: eth1 kernel: Restarting tasks...<6> Strange, eth1 not stopped
if i remove the airo module suspend works normally (this is on a thinkpad t40).
--alex--
Signature · 4 lines
| I believe the moment is at hand when, by a paranoiac and active | | advance of the mind, it will be possible (simultaneously with | | automatism and other passive states) to systematize confusion | | and thus to help to discredit completely the world of reality. |
2.6.19-rc1 regression: airo suspend fails
Quoted 7 lines · Alex Romosan
Quoted 2 lines · Linus Torvalds
so please give it a good testing, and let's see if there are any regressions.
it breaks suspend when the airo module is loaded:
Quoted 7 lines
kernel: Stopping tasks: ================================================================================= kernel: stopping tasks timed out after 20 seconds (1 tasks remaining): kernel: eth1 kernel: Restarting tasks...<6> Strange, eth1 not stoppedif i remove the airo module suspend works normally (this is on a thinkpad t40).
Thanks for your report.
Let's try to figure out what broke it.
As a first step, please replace drivers/net/wireless/airo.c with the version in 2.6.18 and check whether this fixes the issue (you can ignore the deprecated warning during compilation).
Quoted 1 line
--alex--
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: 2.6.19-rc1 regression: airo suspend fails
Quoted 16 lines · Adrian Bunk
Quoted 7 lines · Alex Romosan
Quoted 2 lines · Linus Torvalds
so please give it a good testing, and let's see if there are any regressions.
it breaks suspend when the airo module is loaded:
Quoted 7 lines
kernel: Stopping tasks: ================================================================================= kernel: stopping tasks timed out after 20 seconds (1 tasks remaining): kernel: eth1 kernel: Restarting tasks...<6> Strange, eth1 not stoppedif i remove the airo module suspend works normally (this is on a thinkpad t40).
Quoted 7 lines
Thanks for your report.
Let's try to figure out what broke it.
As a first step, please replace
drivers/net/wireless/airo.cwith the version in 2.6.18 and check whether this fixes the issue (you can ignore the deprecated warning during compilation).
i replaced airo.c with the 2.6.18 version. the good news is i can suspend to memory with it. the bad news is dhcp never got an ip address (so i don't think the 2.6.18 driver really works with the 2.6.19-rc1 infrastructure). any patches i could try? thanks.
--alex--
Signature · 4 lines
| I believe the moment is at hand when, by a paranoiac and active | | advance of the mind, it will be possible (simultaneously with | | automatism and other passive states) to systematize confusion | | and thus to help to discredit completely the world of reality. |
Re: 2.6.19-rc1 regression: airo suspend fails
In reply to Adrian BunkQuoted 9 lines · Adrian Bunk
Quoted 7 lines · Alex Romosan
it breaks suspend when the airo module is loaded:
kernel: Stopping tasks: ================================================================================= kernel: stopping tasks timed out after 20 seconds (1 tasks remaining): kernel: eth1 kernel: Restarting tasks...<6> Strange, eth1 not stopped
Quoted 6 lines
Quoted 2 lines
if i remove the airo module suspend works normally (this is on a thinkpad t40).
Thanks for your report.
Let's try to figure out what broke it.
I believe it was broken by:
http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5
I have seen this in the -mm tree, but didn't follow up at the time. I was able to fix it with the following patch. I don't know if it's the best fix, but it seems to follow the same logic as the original code.
The airo driver used to break out of while loop if there were any signals pending. Since it no longer checks for signals, it at least needs to check if it needs to be frozen.
drivers/net/wireless/airo.c +4 -2
@@ -3090,7 +3090,8 @@ static int airo_thread(void *data) {set_bit (JOB_AUTOWEP , &ai->jobs);break ; } -if (!kthread_should_stop ()) { +if (!kthread_should_stop () && + !freezing (current)) {unsigned long wake_at;if (!ai->expires || !ai->scan_timeout) { wake_at = max(ai->expires,
@@ -3102,7 +3103,8 @@ static int airo_thread(void *data) {schedule_timeout (wake_at - jiffies);continue ; } - }else if (!kthread_should_stop ()) { + }else if (!kthread_should_stop () && + !freezing (current)) {schedule ();continue ; }
Signature · 2 lines
David Kleikamp IBM Linux Technology Center
Re: 2.6.19-rc1 regression: airo suspend fails
Quoted 29 lines · Dave Kleikamp
I believe it was broken by:
http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5I have seen this in the -mm tree, but didn't follow up at the time. I was able to fix it with the following patch. I don't know if it's the best fix, but it seems to follow the same logic as the original code.
The airo driver used to break out of while loop if there were any signals pending. Since it no longer checks for signals, it at least needs to check if it needs to be frozen.
Signed-off-by Dave Kleikamp <[email protected]>diff -Nurp
linux-2.6.19-rc1/drivers/net/wireless/airo.clinux/drivers/net/wireless/airo.cdrivers/net/wireless/airo.c +2
-1@@ -3090,7 +3090,8 @@ static int airo_thread(void *data) {set_bit (JOB_AUTOWEP , &ai->jobs);break ; } -if (!kthread_should_stop ()) { +if (!kthread_should_stop () && + !freezing (current)) {unsigned long wake_at;if (!ai->expires || !ai->scan_timeout) { wake_at = max(ai->expires,
drivers/net/wireless/airo.c static int airo_thread(void *data) { · line 3110
Quoted 9 lines
drivers/net/wireless/airo.c +2
-1@@ -3102,7 +3103,8 @@ static int airo_thread(void *data) {schedule_timeout (wake_at - jiffies);continue ; } - }else if (!kthread_should_stop ()) { + }else if (!kthread_should_stop () && + !freezing (current)) {schedule ();continue ; }
thanks. with this patch applied i can suspend to ram with the airo module loaded.
--alex--
Signature · 4 lines
| I believe the moment is at hand when, by a paranoiac and active | | advance of the mind, it will be possible (simultaneously with | | automatism and other passive states) to systematize confusion | | and thus to help to discredit completely the world of reality. |
Re: 2.6.19-rc1 regression: airo suspend fails
In reply to Dave KleikampHi!
Quoted 22 lines
Quoted 7 lines
Quoted 7 lines
it breaks suspend when the airo module is loaded:
kernel: Stopping tasks: ================================================================================= kernel: stopping tasks timed out after 20 seconds (1 tasks remaining): kernel: eth1 kernel: Restarting tasks...<6> Strange, eth1 not stoppedQuoted 6 lines
Quoted 2 lines
if i remove the airo module suspend works normally (this is on a thinkpad t40).
Thanks for your report.
Let's try to figure out what broke it.
I believe it was broken by:
http://www.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5I have seen this in the -mm tree, but didn't follow up at the time. I was able to fix it with the following patch. I don't know if it's the best fix, but it seems to follow the same logic as the original code.
Quoted 5 lines
The airo driver used to break out of while loop if there were any signals pending. Since it no longer checks for signals, it at least needs to check if it needs to be frozen.
Signed-off-by Dave Kleikamp <[email protected]>
ACK. Please push it to akpm or airo maintainers...
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 14 lines · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with tons of changes, and in fact since 2.6.18 took longer than normal due to me traveling (and others probably also being on vacations), it's possibly even larger than usual.
I think we got updates to pretty much all of the active architectures, we've got VM changes (dirty shared page tracking, for example), we've got networking, drivers, you name it. Even the shortlog and the diffstats are too big to make the kernel mailing list, but even just the summary says something:
Quoted 6 lines
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)so please give it a good testing, and let's see if there are any regressions.
In dmesg:
warning: process `sleep' used the removed sysctl system call
warning: process `alsactl' used the removed sysctl system call
warning: process `nscd' used the removed sysctl system call
warning: process `tail' used the removed sysctl system call
ver_linux says:
/~ $ ./src/kernel/linux-2.6.19-rc1/scripts/ver_linux
If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes.
Linux grinch 2.6.19-rc1 #1 PREEMPT Thu Oct 5 22:53:57 EEST 2006 i686 unknown unknown GNU/Linux
Gnu C 3.3.4 Gnu make 3.80 binutils 2.15.92.0.2 util-linux 2.12p mount 2.12p module-init-tools 3.1 e2fsprogs 1.35 jfsutils 1.1.11 reiserfsprogs 3.6.18 xfsprogs 2.6.13 quota-tools 3.12. nfs-utils 1.0.7 Linux C Library 2.3.4 Dynamic linker (ldd) 2.3.4 Linux C++ Library 5.0.6 Procps 3.2.5 Net-tools 1.60 Kbd 1.12 Sh-utils 5.2.1
/~ $ /usr/sbin/alsactl -v
alsactl version 1.0.10
In Documentation/feature-removal-schedule.txt it says:
---------------------------
What: sys_sysctl When: January 2007 Why: The same information is available through /proc/sys and that is the
interface user space prefers to use. And there do not appear to be any existing user in user space of sys_sysctl. The additional maintenance overhead of keeping a set of binary names gets in the way of doing a good job of maintaining this interface.
Who: Eric Biederman <[email protected]>
---------------------------
I can upgrade my userspace (Slackware 10.1) if necessary ;)
Bye
Calin
--
"frate, trezeste-te, aici nu-i razboiul stelelor"
Radu R. pe offtopic at lug.ro
Quoted 6 lines · On Fri, 6 Oct 2006, [email protected] wrote:
In dmesg:
warning: process `sleep' used the removed sysctl system call
warning: process `alsactl' used the removed sysctl system call
warning: process `nscd' used the removed sysctl system call
warning: process `tail' used the removed sysctl system call
You need to compile with CONFIG_SYSCLT set to 'y' rather than 'n'.
Alternatively, you can probably fix it by just upgrading user-land, but the SYSCLT thing _does_ still exist, it's just deprecated and defaults to off by default..
(Or you can possibly even choose to just ignore the warnings, they probably won't affect any actual behaviour)
Linus
Quoted 8 lines · Linus Torvalds
Quoted 6 lines · On Fri, 6 Oct 2006, [email protected] wrote:
In dmesg:
warning: process `sleep' used the removed sysctl system call
warning: process `alsactl' used the removed sysctl system call
warning: process `nscd' used the removed sysctl system call
warning: process `tail' used the removed sysctl system call
Quoted 8 lines
You need to compile with
CONFIG_SYSCLTset to 'y' rather than 'n'.Alternatively, you can probably fix it by just upgrading user-land, but the SYSCLT thing _does_ still exist, it's just deprecated and defaults to off by default..
(Or you can possibly even choose to just ignore the warnings, they probably won't affect any actual behaviour)
I'm tempted to submit a patch that just kills the warning.
The only known user is lipthreads from glibc performing. if ! uname -v | grep "SMP" ; then
....
fi
That code if it gets -ENOSYS reads /proc/sys/kernel/version, and it has worked this way since the day it was written.
I have been looking for other uses of sys_sysctl but I haven't found any. Why glibc doesn't call uname like any normal program when it wants to uname information is beyond me.
Eric
Quoted 2 lines · Eric W. Biederman
That code if it gets
-ENOSYSreads/proc/sys/kernel/version, and it has worked this way since the day it was written.
What happens if /proc is not mounted (e.g. in a chrooted environment)?
Gabor
Signature · 4 lines
---------------------------------------------------------
MTA SZTAKI Computer and Automation Research Institute
Hungarian Academy of Sciences
---------------------------------------------------------Quoted 6 lines · Gabor Gombas
Quoted 2 lines · Eric W. Biederman
That code if it gets
-ENOSYSreads/proc/sys/kernel/version, and it has worked this way since the day it was written.What happens if /proc is not mounted (e.g. in a chrooted environment)?
glibc decides we aren't a SMP system so it's mutex locks don't busy wait, and go to sleep immediately.
Eric
Quoted 10 lines · Linus Torvalds
Quoted 6 lines · On Fri, 6 Oct 2006, [email protected] wrote:
In dmesg:
warning: process `sleep' used the removed sysctl system call
warning: process `alsactl' used the removed sysctl system call
warning: process `nscd' used the removed sysctl system call
warning: process `tail' used the removed sysctl system call
Quoted 8 lines
You need to compile with
CONFIG_SYSCLTset to 'y' rather than 'n'.Alternatively, you can probably fix it by just upgrading user-land, but the SYSCLT thing _does_ still exist, it's just deprecated and defaults to off by default..
(Or you can possibly even choose to just ignore the warnings, they probably won't affect any actual behaviour)
I get these:
grant@sempro:~$ dmesg |grep removed warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call warning: process `dd' used the removed sysctl system call warning: process `ls' used the removed sysctl system call warning: process `touch' used the removed sysctl system call
too, box still works, slack-11.0 if it matters.
Grant.
Quoted 14 lines · Linus Torvalds
Ok, it's two weeks since v2.6.18, and as a result I've cut a -rc1 release.
As usual for -rc1 with a lot of pending merges, it's a huge thing with tons of changes, and in fact since 2.6.18 took longer than normal due to me traveling (and others probably also being on vacations), it's possibly even larger than usual.
I think we got updates to pretty much all of the active architectures, we've got VM changes (dirty shared page tracking, for example), we've got networking, drivers, you name it. Even the shortlog and the diffstats are too big to make the kernel mailing list, but even just the summary says something:
Quoted 6 lines
4998 total commits
6535 files changed, 414890 insertions(+), 233881 deletions(-)so please give it a good testing, and let's see if there are any regressions.
2.6.19-rc1-git2 :
...
CC arch/i386/mm/pgtable.o CC arch/i386/mach-voyager/voyager_basic.o CC arch/i386/mm/fault.o CC arch/i386/kernel/ptrace.o
arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types for 'voyager_timer_inte
rrupt'include/asm/voyager.h:508: error: previous declaration of 'voyager_timer_interrupt' was here arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types for 'voyager_timer_inte
rrupt'include/asm/voyager.h:508: error: previous declaration of 'voyager_timer_interrupt' was here
make[1]: *** [arch/i386/mach-voyager/voyager_basic.o] Error 1
make: *** [arch/i386/mach-voyager] Error 2
make: *** Waiting for unfinished jobs....
CC arch/i386/kernel/time.o
In file included from arch/i386/kernel/time.c:74:include/asm-i386/mach-voyager/do_timer.h: In function `do_timer_interrupt_hook':include/asm-i386/mach-voyager/do_timer.h:8: error: `irq_regs' undeclared (first use in this
function)include/asm-i386/mach-voyager/do_timer.h:8: error: (Each undeclared identifier is reported o
nly onceinclude/asm-i386/mach-voyager/do_timer.h:8: error: for each function it appears in.)
make[1]: *** [arch/i386/kernel/time.o] Error 1
make[1]: *** Waiting for unfinished jobs....
CC arch/i386/mm/ioremap.o
make: *** [arch/i386/kernel] Error 2
Signature · 3 lines
Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html
Quoted 3 lines · Jesper Juhl
arch/i386/mach-voyager/voyager_basic.c:170: error: conflicting types for 'voyager_timer_interrupt'
Gaah. That voyager timer handling is a bit confusing.
Maybe something like this would fix it?
Untested. Need James or the other alledged voyager-owner to actually test or do somethign better..
Linus
---
include/asm-i386/mach-voyager/do_timer.h +3 -2
@@ -3,12 +3,13 @@ #include <asm/voyager.h>static inline void do_timer_interrupt_hook (void ) { +struct pt_regs *regs =get_irq_regs ();do_timer (1 );#ifndef CONFIG_SMP -update_process_times (user_mode_vm (irq_regs)); +update_process_times (user_mode_vm (regs));#endif -voyager_timer_interrupt (); +voyager_timer_interrupt (regs); }static inline int do_timer_overflow (int count)
include/asm-i386/voyager.h +1 -1
@@ -505,7 +505,7 @@ extern int voyager_memory_detect(int regextern void voyager_smp_intr_init (void );extern __u8 voyager_extended_cmos_read (__u16 cmos_address);extern void voyager_smp_dump (void ); -extern void voyager_timer_interrupt (void ); +extern void voyager_timer_interrupt (struct pt_regs *);extern void smp_local_timer_interrupt (void );extern void voyager_power_off (void );extern void smp_voyager_power_off (void *dummy);
James Bottomley
maintainerQuoted 6 lines · Linus Torvalds
Gaah. That voyager timer handling is a bit confusing.
Maybe something like this would fix it?
Untested. Need James or the other alledged voyager-owner to actually test or do somethign better..
There are other alleged voyager owners ... see, I keep telling you its a popular architecture ...
I'll take a look ... I think I can probably eliminate the regs usage from the VIC code as well.
James
2.6.19-rc1: known regressions (v2)
In reply to Linus TorvaldsThis email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Subject : SMP x86_64 boot problem
References : http://lkml.org/lkml/2006/9/28/330
http://lkml.org/lkml/2006/10/5/289
Submitter : [email protected]
Status : submitter was asked to git bisect
result of bisecting seems to be wrong
Subject : snd-hda-intel <-> forcedeth MSI problem
References : http://lkml.org/lkml/2006/10/5/40
Submitter : Prakash Punnoor <[email protected]>
Status : unknown
Subject : oops in xfrm_register_mode
References : http://lkml.org/lkml/2006/10/4/170
Submitter : Steve Fox <[email protected]>
Status : unknown
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
Subject : thinkpad x60: brightness no longer adjustable in 2.6.18-git
References : http://lkml.org/lkml/2006/10/2/300
Submitter : Pavel Machek <[email protected]>
Status : unknown, related to the issue above?
Subject : monitor not active after boot
References : http://lkml.org/lkml/2006/10/5/338
Submitter : Olaf Hering <[email protected]>
Guilty : Antonino Daplas <[email protected]>
commit 346bc21026e7a92e1d7a4a1b3792c5e8b686133d
Status : unknown
Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
Submitter : Thierry Vignaud <[email protected]>
Status : unknown
Subject : ueagle-atm Oops
References : http://lkml.org/lkml/2006/10/6/390
Submitter : Ernst Herzberg <[email protected]>
Status : unknown
Subject : DVD drive lost DVD capabilities
References : http://lkml.org/lkml/2006/10/1/45
Submitter : Olaf Hering <[email protected]>
Guilty : Jens Axboe <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Status : Jens is working on a fix
Subject : sleep/wakeup on powerbooks apparently busted
References : http://lkml.org/lkml/2006/10/5/13
Submitter : Benjamin Herrenschmidt <[email protected]>
Status : Benjamin will investigate
Subject : doesn't boot on iBook G4
References : http://lkml.org/lkml/2006/10/5/305
Submitter : Andreas Schwab <[email protected]>
Patch : http://lkml.org/lkml/2006/10/6/80
Status : patch available
Subject : airo suspend fails
References : http://lkml.org/lkml/2006/10/6/3
Submitter : Alex Romosan <[email protected]>
Guilty : Sukadev Bhattiprolu <[email protected]> (?)
commit 3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5 (?)
Patch : http://lkml.org/lkml/2006/10/7/139
Status : patch available
Subject : NFSv4 fails to mount (timeout)
References : http://bugzilla.kernel.org/show_bug.cgi?id=7274
Submitter : Torsten Kaiser <[email protected]>
Guilty : Trond Myklebust <[email protected]>
commit 51b6ded4d9a94a61035deba1d8f51a54e3a3dd86
Patch : http://bugzilla.kernel.org/show_bug.cgi?id=7274
Status : patch available
Subject : kexec broken on x86_64
References : http://lkml.org/lkml/2006/10/5/86
Submitter : Magnus Damm <[email protected]>
Patch : http://lkml.org/lkml/2006/10/5/199
Status : patch available
Subject : strange ieee1394 messages
References : http://lkml.org/lkml/2006/10/5/154
Submitter : "Alistair John Strachan" <[email protected]>
Guilty : Stefan Richter <[email protected]>
commit d2f119fe319528da8c76a1107459d6f478cbf28c
Patch : http://lkml.org/lkml/2006/10/6/235
Status : harmless, patch available
Re: 2.6.19-rc1: known regressions (v2)
Am Samstag 07 Oktober 2006 23:46 schrieb Adrian Bunk:
Quoted 4 lines
Subject : snd-hda-intel <-> forcedeth MSI problem
References : http://lkml.org/lkml/2006/10/5/40
Submitter : Prakash Punnoor <[email protected]>
Status : unknown
AFAIK, strictly speaking this is not a regression, but rather a new feature
breaking: MSI capability of snd-hda-intel. Alsa dev
Takashi Iwai doesn't think it is snd-hda-intel doing something wrong, but rather an IRQ routing probem. As such I am not sure who to cc....
While I don't really understand the details, I guess it is due to snd and net sharing the interrupt in "pure" APIC more:
23: 232796 0 IO-APIC-fasteoi HDA Intel, eth0
So both are physically on the same INT line? But MSI of snd want to assign another IRQ to itself:
23: 7486 0 IO-APIC-fasteoi eth0 316: 0 0 PCI-MSI-edge HDA Intel
So it seems that irq23 still receives signals from snd and thus the nobody cared message gets printed.
Thus my work-around is simply to disable MSI of snd by snd-hda-intel.disable_msi=1 and all is well again.
So if this cannot be fixed for 2.6.19, I humbly suggest deactivating MSI of snd-intel-hda by default.
Cheers,
Signature · 3 lines
(°= =°) //\ Prakash Punnoor /\\ V_/ \_V
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel
x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
In reply to Adrian BunkQuoted 9 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
...
Quoted 10 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknownSubject : thinkpad x60: brightness no longer adjustable in 2.6.18-git
References : http://lkml.org/lkml/2006/10/2/300
Submitter : Pavel Machek <[email protected]>
Status : unknown, related to the issue above?
Strange, problem went away after reboot. I guess I'll write it off as an acpi glitch... there's definitely something strange going on with backlight around s2ram: during normal operation, backlight changes are fast. After s2ram, backlight change from keyboard takes 300msec or so.
Signature · 1 line
Thanks for all the (sleeping) penguins.
Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 23 lines · Pavel Machek
Quoted 9 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
...
Quoted 10 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknownSubject : thinkpad x60: brightness no longer adjustable in 2.6.18-git
References : http://lkml.org/lkml/2006/10/2/300
Submitter : Pavel Machek <[email protected]>
Status : unknown, related to the issue above?
Quoted 4 lines
Strange, problem went away after reboot. I guess I'll write it off as an acpi glitch... there's definitely something strange going on with backlight around s2ram: during normal operation, backlight changes are fast. After s2ram, backlight change from keyboard takes 300msec or so.
Is this a regression compared to 2.6.18 or an older issue?
If it's a regression can you bisect?
TIA
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoting r. Adrian Bunk <[email protected]>:
Quoted 13 lines
Subject: Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 10 lines · Pavel Machek
Quoted 3 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
...
Quoted 4 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
This was on a pre -rc1 git tree.
I've been using -rc1 since it's out and does not happen to me anymore. So we probably can write this off as a memory corruption issue that got fixed in between.
Signature · 1 line
MST
Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 15 lines · Michael S. Tsirkin
Quoting r. Adrian Bunk <[email protected]>:
Quoted 13 lines
Subject: Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 10 lines · Pavel Machek
Quoted 3 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
...
Quoted 4 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
Quoted 4 lines
This was on a pre -rc1 git tree.
I've been using -rc1 since it's out and does not happen to me anymore. So we probably can write this off as a memory corruption issue that got fixed in between.
Thanks for the information, I've removed it from the list.
Quoted 1 line
MST
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoting r. Adrian Bunk <[email protected]>:
Quoted 18 lines
Subject: Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 15 lines · Michael S. Tsirkin
Quoting r. Adrian Bunk <[email protected]>:
Quoted 13 lines
Subject: Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 10 lines · Pavel Machek
Quoted 3 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
...
Quoted 4 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknown
Quoted 6 lines
Quoted 4 lines
This was on a pre -rc1 git tree.
I've been using -rc1 since it's out and does not happen to me anymore. So we probably can write this off as a memory corruption issue that got fixed in between.Thanks for the information, I've removed it from the list.
Unfortunately, this came back after using 2.6.19-rc1 for a couple of days without reboot. And I just re-tested and was able to re-produce the problem on 2.6.19-rc2, as well. So the problem is still there, with the same symptoms:
after usig machine for a while, or under stress (e.g. if I do a full kernel compile), I stop getting any ACPI events.
tail -f /var/log/acpid
does not show anything, even on Fn/F4 which is supposed ot be always enabled. Restarting the acpid doesn't do anything either - ACPI starts working again, for a while, only after reboot.
Worked fine under 2.6.18 (I was running vanilla + this patch
http://lkml.org/lkml/2006/7/20/56 which made it into upstream since then).
Any ideas? How to debug this?
Signature · 1 line
MST
Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
In reply to Adrian BunkQuoted 24 lines · Adrian Bunk
Quoted 23 lines · Pavel Machek
Quoted 9 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
...
Quoted 10 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknownSubject : thinkpad x60: brightness no longer adjustable in 2.6.18-git
References : http://lkml.org/lkml/2006/10/2/300
Submitter : Pavel Machek <[email protected]>
Status : unknown, related to the issue above?
Quoted 6 lines
Quoted 4 lines
Strange, problem went away after reboot. I guess I'll write it off as an acpi glitch... there's definitely something strange going on with backlight around s2ram: during normal operation, backlight changes are fast. After s2ram, backlight change from keyboard takes 300msec or so.
Is this a regression compared to 2.6.18 or an older issue?
Slowness is not something I'd classify as serious problem, and breakage is not reproducible. Ignore it for now.
Signature · 1 line
Thanks for all the (sleeping) penguins.
Re: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
Quoted 30 lines · Pavel Machek
Quoted 29 lines · Adrian Bunk
Quoted 27 lines · Pavel Machek
Quoted 9 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
...
Quoted 10 lines
Subject : T60 stops triggering any ACPI events
References : http://lkml.org/lkml/2006/10/4/425
Submitter : "Michael S. Tsirkin" <[email protected]>
Status : unknownSubject : thinkpad x60: brightness no longer adjustable in 2.6.18-git
References : http://lkml.org/lkml/2006/10/2/300
Submitter : Pavel Machek <[email protected]>
Status : unknown, related to the issue above?Strange, problem went away after reboot. I guess I'll write it off as an acpi glitch... there's definitely something strange going on with backlight around s2ram: during normal operation, backlight changes are fast. After s2ram, backlight change from keyboard takes 300msec or so.
Quoted 4 lines
Quoted 1 line
Is this a regression compared to 2.6.18 or an older issue?
Slowness is not something I'd classify as serious problem, and breakage is not reproducible. Ignore it for now.
OK, removed.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: x60 backlight Re: [discuss] 2.6.19-rc1: known regressions (v2)
In reply to Pavel MachekQuoted 5 lines · Pavel Machek
Strange, problem went away after reboot. I guess I'll write it off as an acpi glitch... there's definitely something strange going on with backlight around s2ram: during normal operation, backlight changes are fast. After s2ram, backlight change from keyboard takes 300msec or so.
Yes, I'm seeing that too. It's not just keyboard brightness changes; gnome does some fadeup effect, which takes ~300ms/step as well.
J
Re: 2.6.19-rc1: known regressions (v2)
In reply to Adrian BunkHi,
Quoted 13 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you was declared guilty for a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Quoted 7 lines
Subject : ueagle-atm Oops
References : http://lkml.org/lkml/2006/10/6/390
Submitter : Ernst Herzberg <[email protected]>Handled-By Matthieu Castet <[email protected]>Status : unknown
Patch available at
https://mail.gna.org/public/ueagleatm-dev/2006-10/msg00022.html , but some cleaning is need (I wasn't aware of "USB: fix __must_check warnings in drivers/usb/atm/" patch).
Matthieu
[GIT PULL] ieee1394 update (was 2.6.19-rc1: known regressions (v2))
In reply to Adrian BunkQuoted 2 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
[...]
Quoted 8 lines
Subject : strange ieee1394 messages
References : http://lkml.org/lkml/2006/10/5/154
Submitter : "Alistair John Strachan" <[email protected]>
Guilty : Stefan Richter <[email protected]>commit d2f119fe319528da8c76a1107459d6f478cbf28cHandled-By Stefan Richter <[email protected]>Patch : http://lkml.org/lkml/2006/10/6/235
Status : harmless, patch available
Linus, please pull from the upstream-linus branch at
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git upstream-linus
to receive the following patch...
Stefan Richter:
ieee1394: nodemgr: fix startup of knodemgrd
drivers/ieee1394/nodemgr.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
...or just apply it from this mail.
Date: Fri, 6 Oct 2006 19:49:52 +0200 (CEST)
From: Stefan Richter <[email protected]>
Subject: ieee1394: nodemgr: fix startup of knodemgrd
Revert a thinko in commit d2f119fe319528da8c76a1107459d6f478cbf28c:
When knodemgrd starts, it needs to sleep until host->generation was incremented above its initial value of 0. My wrong logic caused it to start sending requests when the bus wasn't completely ready. Seen as "AT dma reset ctx=0, aborting transmission" messages in 2.6.19-rc1.
---
drivers/ieee1394/nodemgr.c +1 -1
@@ -1614,7 +1614,7 @@ static int nodemgr_host_thread(void *__h {struct host_info *hi = (struct host_info *)__hi;struct hpsb_host *host = hi->host; -unsigned int g, generation =get_hpsb_generation (host) -1 ; +unsigned int g, generation =0 ;int i, reset_cycles =0 ;/* Setup our device-model entries */
Re: 2.6.19-rc1: known regressions (v2) - xfrm_register_mode
In reply to Adrian BunkQuoted 4 lines · Adrian Bunk
Subject : oops in
xfrm_register_mode
References : http://lkml.org/lkml/2006/10/4/170
Submitter : Steve Fox <[email protected]>
Status : unknown
Status: Vivek and Mel have both created patches which fix the boot issue, but it is not clear to me if either of these are acceptable fixes.
Signature · 2 lines
Steve Fox IBM Linux Technology Center
Re: 2.6.19-rc1: known regressions (v2) - xfrm_register_mode
Quoted 10 lines · Steve Fox
Quoted 4 lines · Adrian Bunk
Subject : oops in
xfrm_register_mode
References : http://lkml.org/lkml/2006/10/4/170
Submitter : Steve Fox <[email protected]>
Status : unknownStatus: Vivek and Mel have both created patches which fix the boot issue, but it is not clear to me if either of these are acceptable fixes.
I suggest taking Vivek's.
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
BUG when doing parallel NFS mounts (WAS: Re: Merge window closed: v2.6.19-rc1)
In reply to Linus TorvaldsQuoted 2 lines · Linus Torvalds
so please give it a good testing, and let's see if there are any regressions.
If I run this one-liner script:
while true ; do echo -n . ; mount p4:/home /p4home -ohard,intr & mount p4:/extra /p4extra -ohard,intr ; umount /p4home ; umount /p4extra ; done
I get a BUG after a few iterations, see below. If I replace the '&' with a ';' so the mounts happen one at a time, it works as expected.
The NFS server runs kernel 2.6.17.11.
------------[ cut here ]------------ kernel BUG at fs/nfs/client.c:352! invalid opcode: 0000 [#1] PREEMPT Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore CPU: 0 EIP: 0060:[<e0c836b5>] Not tainted VLI EFLAGS: 00010202 (2.6.19-rc1 #53)
EIP is at nfs_create_server+0x9f1/0xa6e [nfs]
eax: 00000000 ebx: d5e11b40 ecx: ca01a000 edx: 00000000
esi: 00000001 edi: ca01bdac ebp: ca01bd08 esp: ca01bbf8
ds: 007b es: 007b ss: 0068
Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)
Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030
ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c
c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0
Call Trace:
[<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs]
[<c0166416>] vfs_kern_mount+0x42/0x8c
[<c01664c4>] do_kern_mount+0x3b/0x4e
[<c017a8ca>] do_mount+0x25a/0x6a5
[<c017adaa>] sys_mount+0x95/0xd4
[<c01030c1>] sysenter_past_esp+0x56/0x8d
[<b7fa9410>] 0xb7fa9410
=======================
Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86
EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
Re: BUG when doing parallel NFS mounts (WAS: Re: Merge window closed: v2.6.19-rc1)
Quoted 27 lines · Peter Osterlund
Quoted 2 lines · Linus Torvalds
so please give it a good testing, and let's see if there are any regressions.
If I run this one-liner script:
while true ; do echo -n . ; mount p4:/home /p4home -ohard,intr & mount p4:/extra /p4extra -ohard,intr ; umount /p4home ; umount /p4extra ; done
I get a BUG after a few iterations, see below. If I replace the '&' with a ';' so the mounts happen one at a time, it works as expected.
The NFS server runs kernel 2.6.17.11.
------------[ cut here ]------------ kernel BUG at fs/nfs/client.c:352! invalid opcode: 0000 [#1] PREEMPT Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore CPU: 0 EIP: 0060:[<e0c836b5>] Not tainted VLI EFLAGS: 00010202 (2.6.19-rc1 #53)EIP is at
nfs_create_server+0x9f1/0xa6e[nfs]
eax: 00000000 ebx:d5e11b40ecx:ca01a000edx: 00000000
esi: 00000001 edi:ca01bdacebp:ca01bd08esp:ca01bbf8
ds: 007b es: 007b ss: 0068
Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)
Quoted 14 lines
Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030
ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c
c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0
Call Trace:
[<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs]
[<c0166416>] vfs_kern_mount+0x42/0x8c
[<c01664c4>] do_kern_mount+0x3b/0x4e
[<c017a8ca>] do_mount+0x25a/0x6a5
[<c017adaa>] sys_mount+0x95/0xd4
[<c01030c1>] sysenter_past_esp+0x56/0x8d
[<b7fa9410>] 0xb7fa9410
=======================
Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86
EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8According to "git bisect", this is the bad commit:
commit 54ceac4515986030c2502960be620198dd8fe25b
Author: David Howells <[email protected]> Date: Tue Aug 22 20:06:13 2006 -0400
NFS: Share NFS superblocks per-protocol per-server per-FSID
The attached patch makes NFS share superblocks between mounts from the same server and FSID over the same protocol.
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
Re: BUG when doing parallel NFS mounts (WAS: Re: Merge window closed: v2.6.19-rc1)
Quoted 19 lines · Peter Osterlund
Quoted 19 lines
------------[ cut here ]------------ kernel BUG at fs/nfs/client.c:352! invalid opcode: 0000 [#1] PREEMPT Modules linked in: nfs radeon nfsd exportfs lockd autofs4 sunrpc michael_mic arc4 ecb blkcipher cryptomgr crypto_algapi ieee80211_crypt_tkip binfmt_misc dm_mirror dm_mod lp parport_pc parport pcmcia ehci_hcd joydev ohci1394 ieee1394 ohci_hcd bcm43xx yenta_socket snd_atiixp_modem rsrc_nonstatic ide_cd ieee80211softmac ieee80211 serio_raw 8250_pci pcmcia_core 8250 ieee80211_crypt pcspkr 8139too serial_core cdrom rtc usbcore CPU: 0 EIP: 0060:[<e0c836b5>] Not tainted VLI EFLAGS: 00010202 (2.6.19-rc1 #53)EIP is at
nfs_create_server+0x9f1/0xa6e[nfs]
eax: 00000000 ebx:d5e11b40ecx:ca01a000edx: 00000000
esi: 00000001 edi:ca01bdacebp:ca01bd08esp:ca01bbf8
ds: 007b es: 007b ss: 0068
Process mount (pid: 4052, ti=ca01a000 task=ca078030 task.ti=ca01a000)Stack: ca01bc58 c1405c68 ca01bc2c c1405c40 c1405c40 00000296 c05cc5d0 ca078030 ca07857c d6b03380 00000003 ca97704c ca97705c ca078030 00000000 ca01bc8c c0135211 c01eea52 ca078570 00000246 ca01bc6c 00000246 00000002 ca845cb0 Call Trace: [<e0c899b2>] nfs_get_sb+0xbb/0x531 [nfs] [<c0166416>] vfs_kern_mount+0x42/0x8c
Quoted 8 lines
Quoted 8 lines
[<c01664c4>] do_kern_mount+0x3b/0x4e [<c017a8ca>] do_mount+0x25a/0x6a5 [<c017adaa>] sys_mount+0x95/0xd4 [<c01030c1>] sysenter_past_esp+0x56/0x8d [<b7fa9410>] 0xb7fa9410 ======================= Code: 85 28 ff ff ff 89 44 24 04 c7 04 24 00 61 c9 e0 e8 16 8e 49 df 8b 9d 28 ff ff ff 31 d2 81 fb 00 f0 ff ff 0f 97 c2 e9 62 f9 ff ff <0f> 0b 60 01 40 50 c9 e0 e9 34 f9 ff ff 81 fa 60 ea 00 00 0f 86 EIP: [<e0c836b5>] nfs_create_server+0x9f1/0xa6e [nfs] SS:ESP 0068:ca01bbf8
Does the following patch fix it?
Cheers,
Trond
NFS_CS_INITING > NFS_CS_READY, so instead of waiting for the structure to get initialised, we currently immediately jump out of the loop without ever sleeping.
---
fs/nfs/client.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
fs/nfs/client.c +1 -1
@@ -330,7 +330,7 @@ found_client:for (;;) {set_current_state (TASK_INTERRUPTIBLE );if (signal_pending (current) || - clp->cl_cons_state >NFS_CS_READY ) + clp->cl_cons_state !=NFS_CS_INITING )break ;schedule (); }
Re: BUG when doing parallel NFS mounts (WAS: Re: Merge window closed: v2.6.19-rc1)
Quoted 4 lines · Trond Myklebust
Quoted 1 line · Peter Osterlund
Quoted 1 line
kernel BUG at
fs/nfs/client.c:352!Does the following patch fix it?
Yes it does. Thanks!
Signature · 2 lines
Peter Osterlund - [email protected] http://web.telia.com/~u89404340
Re: BUG when doing parallel NFS mounts (WAS: Re: Merge window closed: v2.6.19-rc1)
Quoted 8 lines · Peter Osterlund
Quoted 4 lines · Trond Myklebust
Quoted 1 line · Peter Osterlund
Quoted 1 line
kernel BUG at
fs/nfs/client.c:352!Does the following patch fix it?
Yes it does. Thanks!
Hmm... There would appear to be another bug there. After breaking out of the loop, the task state is left as TASK_INTERRUPTIBLE. Let's just replace the whole thing with a wait_on_event_interruptible.
Cheers,
Trond
NFS_CS_INITING > NFS_CS_READY, so instead of waiting for the structure to get initialised, we currently immediately jump out of the loop without ever sleeping.
It is also possible to break out of the loop while still in TASK_INTERRUPTIBLE. Replace by wait_event_interruptible, which doesn't suffer from these problems.
---
fs/nfs/client.c | 24 +++++------------------- 1 files changed, 5 insertions(+), 19 deletions(-)
fs/nfs/client.c +5 -19
@@ -322,25 +322,11 @@ found_client:if (new)nfs_free_client (new); -if (clp->cl_cons_state ==NFS_CS_INITING ) { -DECLARE_WAITQUEUE (myself, current); - -add_wait_queue (&nfs_client_active_wq, &myself); - -for (;;) { -set_current_state (TASK_INTERRUPTIBLE ); -if (signal_pending (current) || - clp->cl_cons_state >NFS_CS_READY ) -break ; -schedule (); - } - -remove_wait_queue (&nfs_client_active_wq, &myself); - -if (signal_pending (current)) { -nfs_put_client (clp); -return ERR_PTR (-ERESTARTSYS ); - } + error =wait_event_interruptible (&nfs_client_active_wq, + clp->cl_cons_state !=NFS_CS_INITING ); +if (error <0 ) { +nfs_put_client (clp); +return ERR_PTR (-ERESTARTSYS ); }if (clp->cl_cons_state <NFS_CS_READY ) {
2.6.19-rc1: DVB frontend selection causes compile errors
In reply to Linus TorvaldsThe DVB frontend selection changes in 2.6.19-rc1 are giving me the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference to tda10086_attach' saa7134-dvb.c:(.text+0x91db0): undefined reference to tda826x_attach'
make: *** [.tmp_vmlinux1] Error 1
<-- snip -->
.config attached.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.19-rc1
# Mon Oct 9 01:44:46 2006
#CONFIG_X86_32=yCONFIG_GENERIC_TIME=yCONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=yCONFIG_X86=yCONFIG_MMU=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_DMI=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#CONFIG_EXPERIMENTAL=yCONFIG_BROKEN_ON_SMP=yCONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_SWAP=yCONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not setCONFIG_IKCONFIG=yCONFIG_IKCONFIG_PROC=y
# CONFIG_RELAY is not setCONFIG_INITRAMFS_SOURCE=""CONFIG_CC_OPTIMIZE_FOR_SIZE=yCONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not setCONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not setCONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not setCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SHMEM=yCONFIG_SLAB=yCONFIG_VM_EVENT_COUNTERS=yCONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not setCONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#CONFIG_MODULES=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# Block layer
#CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not setCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
# CONFIG_SMP is not setCONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not setCONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not setCONFIG_X86_CMPXCHG=yCONFIG_X86_XADD=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INVLPG=yCONFIG_X86_BSWAP=yCONFIG_X86_POPAD_OK=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_GOOD_APIC=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_USE_3DNOW=yCONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not setCONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not setCONFIG_X86_UP_APIC=yCONFIG_X86_UP_IOAPIC=yCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_MCE=yCONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not setCONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not setCONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not setCONFIG_PAGE_OFFSET=0xC0000000CONFIG_HIGHMEM=yCONFIG_ARCH_FLATMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_SELECT_MEMORY_MODEL=yCONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not setCONFIG_FLATMEM=yCONFIG_FLAT_NODE_MEM_MAP=yCONFIG_SPARSEMEM_STATIC=yCONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not setCONFIG_MTRR=y
# CONFIG_EFI is not setCONFIG_REGPARM=y
# CONFIG_SECCOMP is not setCONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=100
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not setCONFIG_PHYSICAL_START=0x100000
# CONFIG_COMPAT_VDSO is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
#CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not setCONFIG_SOFTWARE_SUSPEND=yCONFIG_PM_STD_PARTITION="/dev/sda2"
#
# ACPI (Advanced Configuration and Power Interface) Support #CONFIG_ACPI=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_VIDEO is not set
# CONFIG_ACPI_HOTKEY is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
# CONFIG_ACPI_PROCESSOR is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_EC=yCONFIG_ACPI_POWER=yCONFIG_ACPI_SYSTEM=yCONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set
#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not setCONFIG_PCI_GOANY=yCONFIG_PCI_BIOS=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_HT_IRQ is not setCONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Networking
#CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not setCONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=y
# CONFIG_NET_KEY is not setCONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not setCONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not setCONFIG_TCP_CONG_CUBIC=yCONFIG_DEFAULT_TCP_CONG="cubic"
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not setCONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not setCONFIG_NETFILTER_XT_MATCH_LIMIT=yCONFIG_NETFILTER_XT_MATCH_MAC=y
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not setCONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
#
# IP: Netfilter Configuration
#CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not setCONFIG_IP_NF_FTP=y
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_NETBIOS_NS is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_IPRANGE is not set
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not setCONFIG_IP_NF_FILTER=y
# CONFIG_IP_NF_TARGET_REJECT is not setCONFIG_IP_NF_TARGET_LOG=y
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_TARGET_TCPMSS is not set
# CONFIG_IP_NF_NAT is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker #
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#CONFIG_PARPORT=yCONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not setCONFIG_PARPORT_1284=y
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
#CONFIG_IDE=yCONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives #
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not setCONFIG_BLK_DEV_IDEPCI=yCONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not setCONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not setCONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not setCONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not setCONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not setCONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not setCONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs #
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers #
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
#CONFIG_NET_ETHERNET=yCONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not setCONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not setCONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1280CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not setCONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not setCONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not setCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_NR_UARTS=4CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=256CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not setCONFIG_NVRAM=yCONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not setCONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not setCONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not setCONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not setCONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#CONFIG_I2C=yCONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not setCONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not setCONFIG_I2C_VIAPRO=y
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#CONFIG_HWMON=yCONFIG_HWMON_VID=y
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not setCONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_TIFM_CORE is not set
#
# Multimedia devices
#CONFIG_VIDEO_DEV=yCONFIG_VIDEO_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
#
# Encoders/decoders and other helper chips
#
#
# Audio decoders
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TDA9875 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
#
# Video decoders
#
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA7111 is not set
# CONFIG_VIDEO_SAA7114 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
# CONFIG_VIDEO_CX25840 is not set
#
# MPEG video encoders
#
# CONFIG_VIDEO_CX2341X is not set
#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not setCONFIG_VIDEO_SAA7134=y
# CONFIG_VIDEO_SAA7134_ALSA is not setCONFIG_VIDEO_SAA7134_DVB=y
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#CONFIG_DVB=yCONFIG_DVB_CORE=y
# CONFIG_DVB_CORE_ATTACH is not set
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set
#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not setCONFIG_DVB_TDA1004X=y
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
#
# Tuners/PLL support
#CONFIG_DVB_PLL=y
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUNER_MT2060 is not set
#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not setCONFIG_VIDEO_TUNER=yCONFIG_VIDEO_BUF=yCONFIG_VIDEO_BUF_DVB=yCONFIG_VIDEO_IR=y
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#CONFIG_FIRMWARE_EDID=yCONFIG_FB=yCONFIG_FB_DDC=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not setCONFIG_FB_RADEON=yCONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not setCONFIG_VIDEO_SELECT=yCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#CONFIG_SND=yCONFIG_SND_TIMER=yCONFIG_SND_PCM=yCONFIG_SND_RAWMIDI=yCONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not setCONFIG_SND_RTCTIMER=yCONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#CONFIG_SND_MPU401_UART=yCONFIG_SND_AC97_CODEC=yCONFIG_SND_AC97_BUS=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not setCONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#CONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not setCONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' #
#
# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) #
# CONFIG_EDAC is not set
#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set
#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set
#
# DMA Clients
#
#
# DMA Devices
#
#
# File systems
#CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not setCONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=yCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_ZISOFS_FS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=yCONFIG_FAT_DEFAULT_CODEPAGE=850CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_SYSFS=yCONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not setCONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#CONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-15"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not setCONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not setCONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not setCONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not setCONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_KERNEL is not setCONFIG_LOG_BUF_SHIFT=14CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_UNWIND_INFO is not setCONFIG_EARLY_PRINTK=yCONFIG_X86_FIND_SMP_CONFIG=yCONFIG_X86_MPPARSE=yCONFIG_DOUBLEFAULT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not setCONFIG_CRC32=y
# CONFIG_LIBCRC32C is not setCONFIG_ZLIB_INFLATE=yCONFIG_PLIST=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_X86_BIOS_REBOOT=yCONFIG_KTIME_SCALAR=y
Re: [v4l-dvb-maintainer] 2.6.19-rc1: DVB frontend selection causes compile errors
Quoted 12 lines · Adrian Bunk
The DVB frontend selection changes in 2.6.19-rc1 are giving me the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference totda10086_attach' saa7134-dvb.c:(.text+0x91db0): undefined reference totda826x_attach'
make: *** [.tmp_vmlinux1] Error 1
Quoted 6 lines
<-- snip -->
.config attached.
cu
Adrian
Adrian,
Does this fix it for you?
drivers/media/dvb/frontends/tda10086.h +9 -0
@@ -35,7 +35,16 @@ struct tda10086_config u8 invert; }; +#if defined(CONFIG_DVB_TDA10086 ) || defined(CONFIG_DVB_TDA10086_MODULE )extern struct dvb_frontend *tda10086_attach (const struct tda10086_config * config,struct i2c_adapter * i2c); +#else +static inline struct dvb_frontend *tda10086_attach (const struct tda10086_config * config, +struct i2c_adapter * i2c) +{ +printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __FUNCTION__); +return NULL ; +} +#endif // CONFIG_DVB_TDA10086 #endif // TDA10086_H
drivers/media/dvb/frontends/tda826x.h +15 -2
@@ -35,6 +35,19 @@* @param has_loopthrough Set to 1 if the card has a loopthrough RF connector. * @return FE pointer on success, NULL on failure. */ -extern struct dvb_frontend *tda826x_attach (struct dvb_frontend *fe,int addr,struct i2c_adapter *i2c,int has_loopthrough); +#if defined(CONFIG_DVB_TDA826X ) || defined(CONFIG_DVB_TDA826X_MODULE ) +extern struct dvb_frontend *tda826x_attach (struct dvb_frontend *fe,int addr, +struct i2c_adapter *i2c, +int has_loopthrough); +#else +static inline struct dvb_frontend *tda826x_attach (struct dvb_frontend *fe, +int addr, +struct i2c_adapter *i2c, +int has_loopthrough) +{ +printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __FUNCTION__); +return NULL ; +} +#endif // CONFIG_DVB_TDA826X -#endif +#endif // __DVB_TDA826X_H__
Re: [v4l-dvb-maintainer] 2.6.19-rc1: DVB frontend selection causes compile errors
Quoted 15 lines · Michael Krufky
Quoted 14 lines · Adrian Bunk
The DVB frontend selection changes in 2.6.19-rc1 are giving me the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference totda10086_attach' saa7134-dvb.c:(.text+0x91db0): undefined reference totda826x_attach'
make: *** [.tmp_vmlinux1] Error 1<-- snip -->
Quoted 7 lines
Quoted 4 lines
.config attached.
cu
AdrianAdrian,
Hi Michael,
Quoted 1 line
Does this fix it for you?
it does fix it with my .config, but
Quoted 11 lines
Signed-off-by Michael Krufky <[email protected]>diff -r
7efa405e2d66linux/drivers/media/dvb/frontends/tda10086.hdrivers/media/dvb/frontends/tda10086.h +1
-0@@ -35,7 +35,16 @@ struct tda10086_configu8 invert; }; +#if defined(CONFIG_DVB_TDA10086 ) || defined(CONFIG_DVB_TDA10086_MODULE ) extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,
drivers/media/dvb/frontends/tda10086.h struct tda10086_config · line 48
Quoted 10 lines
drivers/media/dvb/frontends/tda10086.h +8
-0struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend *tda10086_attach (const struct tda10086_config * config, +struct i2c_adapter * i2c) +{ +printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __FUNCTION__); +return NULL ; +} +#endif // CONFIG_DVB_TDA10086
this breaks with CONFIG_VIDEO_SAA7134_DVB=y, CONFIG_DVB_TDA1004X=m.
#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE)) might work, but the whole manual frontend selection IMHO looks a bit
fragile.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon SeedRe: [v4l-dvb-maintainer] 2.6.19-rc1: DVB frontend selection causes compile errors
Quoted 53 lines · Adrian Bunk
Quoted 13 lines · Michael Krufky
Quoted 12 lines · Adrian Bunk
The DVB frontend selection changes in 2.6.19-rc1 are giving me the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference totda10086_attach' saa7134-dvb.c:(.text+0x91db0): undefined reference totda826x_attach'
make: *** [.tmp_vmlinux1] Error 1Quoted 8 lines
Quoted 6 lines
<-- snip -->
.config attached.
cu
AdrianAdrian,
Hi Michael,
Quoted 1 line
Does this fix it for you?
it does fix it with my .config, but
Quoted 11 lines
Signed-off-by Michael Krufky <[email protected]>diff -r
7efa405e2d66linux/drivers/media/dvb/frontends/tda10086.hdrivers/media/dvb/frontends/tda10086.h +1
-0@@ -35,7 +35,16 @@ struct tda10086_configu8 invert; }; +#if defined(CONFIG_DVB_TDA10086 ) || defined(CONFIG_DVB_TDA10086_MODULE ) extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,drivers/media/dvb/frontends/tda10086.h struct tda10086_config · line 48
Quoted 10 lines
drivers/media/dvb/frontends/tda10086.h +8
-0struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend *tda10086_attach (const struct tda10086_config * config, +struct i2c_adapter * i2c) +{ +printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __FUNCTION__); +return NULL ; +} +#endif // CONFIG_DVB_TDA10086 this breaks with
CONFIG_VIDEO_SAA7134_DVB=y,CONFIG_DVB_TDA1004X=m.
Quoted 7 lines
#if
defined(CONFIG_DVB_TDA10086)|| (defined(CONFIG_DVB_TDA10086_MODULE)&& defined(MODULE)) might work, but the whole manual frontend selection IMHO looks a bit
fragile.cu
Adrian
That's never going to work -- If the card driver is build as y, then the frontend must also be built y...
Andrew, we need some Kconfig logic to prevent that case described by Adrian, above.
-Mike
Re: [v4l-dvb-maintainer] 2.6.19-rc1: DVB frontend selection causes compile errors
Quoted 58 lines · On Mon, 09 Oct 2006 04:27:26 -0400 Michael Krufky wrote:
Quoted 57 lines · Adrian Bunk
Quoted 13 lines · Michael Krufky
Quoted 12 lines · Adrian Bunk
The DVB frontend selection changes in 2.6.19-rc1 are giving me the following compile error:
<-- snip -->
...
LD .tmp_vmlinux1drivers/built-in.o: In function `dvb_init':
saa7134-dvb.c:(.text+0x91d94): undefined reference totda10086_attach' saa7134-dvb.c:(.text+0x91db0): undefined reference totda826x_attach'
make: *** [.tmp_vmlinux1] Error 1Quoted 8 lines
Quoted 6 lines
<-- snip -->
.config attached.
cu
AdrianAdrian,
Hi Michael,
Quoted 1 line
Does this fix it for you?
it does fix it with my .config, but
Quoted 11 lines
Signed-off-by Michael Krufky <[email protected]>diff -r
7efa405e2d66linux/drivers/media/dvb/frontends/tda10086.hdrivers/media/dvb/frontends/tda10086.h +1
-0@@ -35,7 +35,16 @@ struct tda10086_configu8 invert; }; +#if defined(CONFIG_DVB_TDA10086 ) || defined(CONFIG_DVB_TDA10086_MODULE ) extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config,drivers/media/dvb/frontends/tda10086.h struct tda10086_config · line 48
Quoted 10 lines
drivers/media/dvb/frontends/tda10086.h +8
-0struct i2c_adapter* i2c); +#else +static inline struct dvb_frontend *tda10086_attach (const struct tda10086_config * config, +struct i2c_adapter * i2c) +{ +printk (KERN_WARNING "%s: driver disabled by Kconfig\n" , __FUNCTION__); +return NULL ; +} +#endif // CONFIG_DVB_TDA10086 this breaks with
CONFIG_VIDEO_SAA7134_DVB=y,CONFIG_DVB_TDA1004X=m.#if
defined(CONFIG_DVB_TDA10086)|| (defined(CONFIG_DVB_TDA10086_MODULE)&& defined(MODULE)) might work, but the whole manual frontend selection IMHO looks a bit
fragile.
Quoted 5 lines
Quoted 3 lines
cu
AdrianThat's never going to work -- If the card driver is build as y, then the frontend must also be built y...
Where is the connection between the card driver and the frontend(s)? Is it in card driver source files or frontend source files or in Kconfig files? I looked but didn't see it (in Kconfig).
Quoted 1 line
Andrew, we need some
Kconfiglogic to prevent that case described by Adrian, above.
There seems to be a good bit on dependence between the Multimedia devices menu and DVB/frontends menus.. without having much Kconfig language dependence info there. Maybe I'm wrong. I hope so.
---
~Randy
Re: [v4l-dvb-maintainer] 2.6.19-rc1: DVB frontend selection causes compile errors
Quoted 7 lines · Randy Dunlap
Quoted 6 lines · On Mon, 09 Oct 2006 04:27:26 -0400 Michael Krufky wrote:
Quoted 5 lines · Adrian Bunk
Quoted 1 line
+#if
defined(CONFIG_DVB_TDA10086)||defined(CONFIG_DVB_TDA10086_MODULE)this breaks with
CONFIG_VIDEO_SAA7134_DVB=y,CONFIG_DVB_TDA1004X=m.#if
defined(CONFIG_DVB_TDA10086)|| (defined(CONFIG_DVB_TDA10086_MODULE)&& defined(MODULE))
I'd do this ^^^.
Quoted 5 lines
Quoted 5 lines
Quoted 3 lines
might work, but the whole manual frontend selection IMHO looks a bit fragile.
That's never going to work -- If the card driver is build as y, then the frontend must also be built y...
The frontend must only be built as 'y' if it the card driver (built as 'y') wants to use it. There is no reason you couldn't compile a card driver into the kernel, and set one of the supported front-ends to be a module, so that a different card driver, compiled as a module, could use it. For instance, use 'y' for all built-in hardware and then 'm' for hot-pluggable USB devices and their front-ends.
Quoted 3 lines
Where is the connection between the card driver and the frontend(s)? Is it in card driver source files or frontend source files or in
Kconfigfiles? I looked but didn't see it (inKconfig).
It's in the card driver source files. They call (only) a xxxx_attach() function to get the frontend. The Kconfig entry for a card driver has 'select' lines for all the front-ends it can use, when DVB_FE_CUSTOMISE is turned off. When DVB_FE_CUSTOMISE is on, the user must turn on the front-ends they want.
2.6.19-rc1: known regressions (v3)
In reply to Linus TorvaldsThis email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
If you find your name in the Cc header, you are either submitter of one of the bugs, maintainer of an affectected subsystem or driver, a patch of you caused a breakage or I'm considering you in any other way possibly involved with one or more of these issues.
Due to the huge amount of recipients, please trim the Cc when answering.
Subject : sata-via doesn't detect anymore disks attached to VIA vt6421
References : http://bugzilla.kernel.org/show_bug.cgi?id=7255
Submitter : Thierry Vignaud <[email protected]>
Status : unknown
Subject : monitor not active after boot
References : http://lkml.org/lkml/2006/10/5/338
Submitter : Olaf Hering <[email protected]>
commit 346bc21026e7a92e1d7a4a1b3792c5e8b686133d
Status : unknown
Subject : SMP x86_64 boot problem
References : http://lkml.org/lkml/2006/9/28/330
http://lkml.org/lkml/2006/10/5/289
Submitter : [email protected]
Status : submitter was asked to git bisect
result of bisecting seems to be wrong
Subject : sleep/wakeup on powerbooks apparently busted
References : http://lkml.org/lkml/2006/10/5/13
Submitter : Benjamin Herrenschmidt <[email protected]>
Status : Benjamin will investigate
Subject : w83781d modprobing failure
References : http://bugzilla.kernel.org/show_bug.cgi?id=7293
Submitter : Sylvain BERTRAND <[email protected]>
commit 8202632647278eba7223727dc442f49227c040d0 (?)
Status : Jean is investigating
Subject : CD/DVD drives lost capabilities
References : http://lkml.org/lkml/2006/10/1/45
http://bugzilla.kernel.org/show_bug.cgi?id=7284
Submitter : Olaf Hering <[email protected]>
Johannes Berg <[email protected]>
commit 4aff5e2333c9a1609662f2091f55c3f6fffdad36
Status : Jens is working on a fix
Subject : snd-hda-intel <-> forcedeth MSI problem
References : http://lkml.org/lkml/2006/10/5/40
http://lkml.org/lkml/2006/10/7/164
Submitter : Prakash Punnoor <[email protected]>
Status : suggested workaround for 2.6.19:
deactivate MSI in snd-intel-hda by default
Subject : DVB frontend selection causes compile errors
References : http://lkml.org/lkml/2006/10/8/244
Submitter : Adrian Bunk <[email protected]>
commit 176ac9da4f09820a43fd48f0e74b1486fc3603ba
"Andrew de Quincey" <[email protected]>
Status : possible workaround: don't allow CONFIG_DVB_FE_CUSTOMISE=y
Subject : ueagle-atm Oops
References : http://lkml.org/lkml/2006/10/6/390
Submitter : Ernst Herzberg <[email protected]>
commit e7ccdfec087f02930c5cdc81143d4a045ae8d361
Laurent Riffard
Patch : https://mail.gna.org/public/ueagleatm-dev/2006-10/msg00022.html
Status : "patch available, but some cleaning is needed"
Subject : oops in xfrm_register_mode
References : http://lkml.org/lkml/2006/10/4/170
Submitter : Steve Fox <[email protected]>
Status : patch available
Subject : doesn't boot on iBook G4
References : http://lkml.org/lkml/2006/10/5/305
Submitter : Andreas Schwab <[email protected]>
Patch : http://lkml.org/lkml/2006/10/6/80
Status : patch available
Subject : airo suspend fails
References : http://lkml.org/lkml/2006/10/6/3
Submitter : Alex Romosan <[email protected]>
commit 3b4c7d640376dbccfe80fc4f7b8772ecc7de28c5 (?)
Patch : http://lkml.org/lkml/2006/10/7/139
Status : patch available
Subject : kexec broken on x86_64
References : http://lkml.org/lkml/2006/10/5/86
Submitter : Magnus Damm <[email protected]>
Patch : http://lkml.org/lkml/2006/10/5/199
Status : patch available
Subject : NFSv4 fails to mount (timeout)
References : http://bugzilla.kernel.org/show_bug.cgi?id=7274
Submitter : Torsten Kaiser <[email protected]>
commit 51b6ded4d9a94a61035deba1d8f51a54e3a3dd86
Patch : http://bugzilla.kernel.org/show_bug.cgi?id=7274
Status : patch available
Re: 2.6.19-rc1: known regressions (v3)
Quoted 6 lines
Subject : sleep/wakeup on powerbooks apparently busted
References : http://lkml.org/lkml/2006/10/5/13
Submitter : Benjamin Herrenschmidt <[email protected]>Handled-By Benjamin Herrenschmidt <[email protected]>Status : Benjamin will investigate
Could be a long standing problem with some powerpc platform drivers not properly updated to Russel King changes from last year (still using struct device_driver instead of struct platform_driver). A patch will be sent to Linus shortly by Paulus which makes it work for us. More field testing will be needed.
Ben.
Re: 2.6.19-rc1: known regressions (v3)
In reply to Adrian BunkQuoted 12 lines · Adrian Bunk
This email lists some known regressions in 2.6.19-rc1 compared to 2.6.18 that are not yet fixed Linus' tree.
<snip>
Subject : doesn't boot on iBook G4
References : http://lkml.org/lkml/2006/10/5/305
Submitter : Andreas Schwab <[email protected]>Handled-By Mel Gorman <[email protected]>Patch : http://lkml.org/lkml/2006/10/6/80
Status : patch available
This patch is currently in 2.6.18-rc1-mm1 and is called mm-use-symbolic-names-instead-of-indices-for-zone-initialisation.patch .
Signature · 3 lines
Mel Gorman Part-time Phd Student Linux Technology Center University of Limerick IBM Dublin Software Lab
Re: 2.6.19-rc1: known regressions (v3)
In reply to Adrian BunkQuoted 5 lines · Adrian Bunk
Subject : sleep/wakeup on powerbooks apparently busted
References : http://lkml.org/lkml/2006/10/5/13
Submitter : Benjamin Herrenschmidt <[email protected]>Handled-By Benjamin Herrenschmidt <[email protected]>Status : Benjamin will investigate
Should be fixed once Linus pulls the powerpc.git tree.
Paul.
Re: 2.6.19-rc1: known regressions (v3)
Quoted 9 lines · Paul Mackerras
Quoted 5 lines · Adrian Bunk
Subject : sleep/wakeup on powerbooks apparently busted
References : http://lkml.org/lkml/2006/10/5/13
Submitter : Benjamin Herrenschmidt <[email protected]>Handled-By Benjamin Herrenschmidt <[email protected]>Status : Benjamin will investigate
Should be fixed once Linus pulls the powerpc.git tree.
Thanks for the information, I've removed it from the list.
Quoted 1 line
Paul.
cu
Adrian
Signature · 4 lines
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed