Skip to contentSkip to conversation

Ondemand/Conservative not working with 2.6.18

DISCUSSION S.Çağlar Onur 1 participant 2 messages Oct 4, 2006 – Oct 9, 2006

lore
Share & tools
lore
#0 lore raw

Hi;

With kernel 2.6.18 "ondemand" and "conservative" governors are not working with Sony Vaio FS-215B laptop, no frequency scaling or anything else :) occurs while system is %100 idle or at any workload using these governors, but setting "performance" governor changes to 1733 Mhz and "powersave" changes to 800 Mhz as expected. They all works without a problem with 2.6.16.x, system information below;

/proc/cpuinfo

processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Pentium(R) M processor 1.73GHz
stepping : 8
cpu MHz : 1733.000
cache size : 2048 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up est tm2
bogomips : 3460.80

/sys/devices/system/cpu/cpu0/cpufreq values

ondemand/ignore_nice_load:0 ondemand/up_threshold:60 ondemand/sampling_rate:333000 ondemand/sampling_rate_min:10000 ondemand/sampling_rate_max:10000000 scaling_cur_freq:1733000
cpuinfo_cur_freq:1733000 scaling_available_frequencies:1733000 1333000 1067000 800000 scaling_available_governors:ondemand performance scaling_driver:centrino
scaling_governor:ondemand
affected_cpus:0
scaling_max_freq:1733000
scaling_min_freq:800000
cpuinfo_max_freq:1733000
cpuinfo_min_freq:800000

Cheers

Signature · 4 lines
S.Çağlar Onur <[email protected]>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!
#1 lore raw

04 Eki 2006 Çar 16:33 tarihinde, S.Çağlar Onur şunları yazmıştı:

Quoted 8 lines

Hi;

With kernel 2.6.18 "ondemand" and "conservative" governors are not working with Sony Vaio FS-215B laptop, no frequency scaling or anything else :) occurs while system is %100 idle or at any workload using these governors, but setting "performance" governor changes to 1733 Mhz and "powersave" changes to 800 Mhz as expected. They all works without a problem with 2.6.16.x, system information below;

Also not working with 2.6.19-rc1

Signature · 4 lines
S.Çağlar Onur <[email protected]>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!