Skip to contentSkip to conversation

Updates NAND Flash controller support in PPC 440 EP/GR/x

PATCH New Jeff Mann 2 participants 2 messages Oct 9, 2006 – Oct 10, 2006

lore
Share & tools
lore

Jeff Mann

author
#0 lore raw

PATCH 1/1 Updates NAND Flash controller support in PPC 440 EP/GR/x

This patch updates the NAND flash controller support for PPC 440 EP/GR/x processors to support up to the maximum of four devices on the controller. In addition, the NAND initialization streamlines the additional of future controller support for future boards by calling the chip select function through a function (nand_select_device(void)) in nand.c such that calls to board or processor specific functions can be added in one place instead of in several of the nand files.

As discusses with Stefan, the configuration format is

	#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE + 1,

CFG_NAND_BASE + 2 ....}

The Sequoia board will need to be updated, which I will do when we get the next build of them back here in a few days.
------------------

*CHANGELOG
updates the NAND flash controller support for PPC 440 EP/GR/x
processors to allow for multiple nand devices on the controller.
Patch By Jeffrey Mann, Embedded Planet.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: M41T62.patch
Type: application/octet-stream
Size: 7305 bytes
Desc: M41T62.patch
Url : http://lists.denx.de/pipermail/u-boot/attachments/20061009/0d033615/attachment.obj

#1 lore raw

PATCH 1/1 Updates NAND Flash controller support in PPC 440 EP/GR/x

Hi Jeff,

Quoted 8 lines · Jeff Mann

This patch updates the NAND flash controller support for PPC 440 EP/GR/x processors to support up to the maximum of four devices on the controller. In addition, the NAND initialization streamlines the additional of future controller support for future boards by calling the chip select function through a function (nand_select_device(void)) in nand.c such that calls to board or processor specific functions can be added in one place instead of in several of the nand files.

Quoted 6 lines

As discusses with Stefan, the configuration format is

	#define CFG_NAND_BASE_LIST	{ CFG_NAND_BASE + 1,

CFG_NAND_BASE + 2 ....}

The Sequoia board will need to be updated, which I will do when we get the next build of them back here in a few days.

Does this mean that your patch leaves the Sequoia support broken for now? This is not acceptable. If this is the case, then please update the current Sequoia support to work with your updated NAND support.

Quoted 4 lines

*CHANGELOG
updates the NAND flash controller support for PPC 440 EP/GR/x
processors to allow for multiple nand devices on the controller.
Patch By Jeffrey Mann, Embedded Planet.

Hmmm. You have attached the wrong file. Nothing is dealing with the 440 NDFC in this file. Please resend. Thanks.

Best regards,
Stefan