Mandriva 2007 ax25 node kernelerror ?

Hello !

Somone has a clue of this ?

Look at the attachement

SM6HOC Lars

[root@lb4 Desktop]# call lo1 sm6hoc-10
GW4PTS AX.25 Connect v1.11
*** Connected to sm6hoc-10
*** buffer overflow detected ***: call terminated ======= Backtrace: ========= /lib/i686/libc.so.6(__chk_fail+0x41)[0xb7edec41] /lib/i686/libc.so.6[0xb7ede458] /lib/i686/libc.so.6(_IO_default_xsputn+0xb7)[0xb7e62527] /lib/i686/libc.so.6(_IO_vfprintf+0x931)[0xb7e3bea1] /lib/i686/libc.so.6(__vsprintf_chk+0xad)[0xb7ede50d] /lib/i686/libc.so.6(__sprintf_chk+0x30)[0xb7ede440] call[0x804b385]
======= Memory map: ========

08048000-08053000 r-xp 00000000 03:06 1532913    /usr/bin/call
08053000-08054000 rw-p 0000b000 03:06 1532913    /usr/bin/call
08054000-08075000 rw-p 08054000 00:00 0          [heap]
b7dfb000-b7dfd000 rw-p b7dfb000 00:00 0 
b7dfd000-b7dff000 r-xp 00000000 03:06 60443      /lib/libdl-2.4.so
b7dff000-b7e01000 rw-p 00001000 03:06 60443      /lib/libdl-2.4.so
b7e01000-b7f28000 r-xp 00000000 03:06 60422      /lib/i686/libc-2.4.so
b7f28000-b7f29000 r--p 00126000 03:06 60422      /lib/i686/libc-2.4.so
b7f29000-b7f2b000 rw-p 00127000 03:06 60422      /lib/i686/libc-2.4.so
b7f2b000-b7f2e000 rw-p b7f2b000 00:00 0 
b7f2e000-b7f36000 r-xp 00000000 03:06 1756548    /usr/lib/libax25.so.0.0.0
b7f36000-b7f37000 rw-p 00007000 03:06 1756548    /usr/lib/libax25.so.0.0.0
b7f37000-b7f75000 r-xp 00000000 03:06 60503      /lib/libncurses.so.5.5
b7f75000-b7f7d000 rw-p 0003e000 03:06 60503      /lib/libncurses.so.5.5

b7f7d000-b7f7e000 rw-p b7f7d000 00:00 0
b7f8b000-b7f95000 r-xp 00000000 03:06 60475 /lib/libgcc_s-4.1.1.so.1
b7f95000-b7f96000 rw-p 0000a000 03:06 60475 /lib/libgcc_s-4.1.1.so.1
b7f96000-b7f98000 rw-p b7f96000 00:00 0

b7f98000-b7fb0000 r-xp 00000000 03:06 60432      /lib/ld-2.4.so
b7fb0000-b7fb1000 r--p 00017000 03:06 60432      /lib/ld-2.4.so
b7fb1000-b7fb2000 rw-p 00018000 03:06 60432      /lib/ld-2.4.so
bfb19000-bfb2e000 rw-p bfb19000 00:00 0          [stack]

bfffe000-bffff000 r-xp bfffe000 00:00 0
Avbruten (SIGABRT)
[root@lb4 Desktop]#

Hey Lars and the gang;

The first thing that comes to mind is to make sure the rpms you loaded in for the ax.25 stuff has been compiled against the correct and SAME kernel you are using.

Vy 72;

Bob
w9ya

I wonder whether anyone out there is using Debian GNU/Linux as a Packet-Radio (AX25) client/terminal ?

73

Geoff
G3FHL

I'm running an APRS station on Debian. I'm not using it to connect to other nodes (BBS/cluster etc). Can I help?

There's also a debian-hams list (at lists.debian.org).

Hamish

Hamish Moffatt VK3SB <[email protected]> <[email protected]>

Here in Florida we are converting all of our packet switches to Linux, indeed there is a new iso that is available at the following location that has it all in
there, when you do the HD install it ask if you want the Knoppix install or the Debian install, select Debian, and it will install it all in there, just go in and
configure the ax25 files for your station and you are up and running. Here is the address:
ftp://ftp.n4zkf.com/Fadca/
fadca 1.8 is a 2.6.17 kernel.
The previous ones are 2.4 kernels.

This iso has instructions for setting up the ax25 stuff, FPAC, F6FBB BBS and NetRom also, just in case you want to do that stuff. The basic ax25 setup is in the ax25 howto.

There has been quite a bit of exchanges of setup tricks on both the FPAC reflector (the archives are on www.f6fbb.org) and the FADCA reflector (www. fadca.org for those archives) a part of it has been about interfacing TNC's and ax25 parameters. Dig in, you should find a lot of good data.

Chuck Hast  -- KP4DJT --
To paraphrase my flight instructor;
"the only dumb question is the one you DID NOT ask resulting in my going
out and having to identify your bits and pieces in the midst of torn
and twisted metal."

No. The kernel's ABI is cast into stone and will not change unless in very rare, carefully considered circumstances.

Ralf

If you say so.

Bob
w9ya

This dump was created by the application not kernel.

Ralf