Skip to contentSkip to conversation

Two more x86-64 bug fixes in recent pull

PATCH In review Andi Kleen 3 participants 5 messages Oct 21, 2006 – Oct 22, 2006

lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

cover Two more x86-64 bug fixes in recent pull

Two last minute fixes.

-Andi

author
#1 lore raw

PATCH 1/2 x86_64: Fix C3 timer test

There was a typo in the C3 latency test to decide of the TSC should be used or not. It used the C2 latency threshold, not the C3 one. Fix that.

This should fix the time on various dual core laptops.

---
 arch/x86_64/kernel/time.c |    2 +-
 1 files changed, 1 insertion(+), 1 deletion(-)
arch/x86_64/kernel/time.c +1 -1
Index: linux/arch/x86_64/kernel/time.c
===================================================================
@@ -948,7 +948,7 @@ __cpuinit int unsynchronized_tsc(void)
  	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) {
 #ifdef CONFIG_ACPI
 		/* But TSC doesn't tick in C3 so don't use it there */
-		if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 100)
+		if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000)
 			return 1;
 #endif
  		return 0;
author
#2 lore raw

PATCH 2/2 x86_64: increase PHB1 split transaction timeout

In reply to Andi Kleen

From: Muli Ben-Yehuda <[email protected]>
This patch increases the timeout for PCI split transactions on PHB1 on the first Calgary to work around an issue with the aic94xx adapter. Fixes kernel.org bugzilla #7180
(http://bugzilla.kernel.org/show_bug.cgi?id=7180)

Based on excellent debugging and a patch by Darrick J. Wong <[email protected]>

---
 arch/x86_64/kernel/pci-calgary.c |   44 ++++++++++++++++++++++++++++++++++++++-
 1 files changed, 43 insertions(+), 1 deletion(-)
arch/x86_64/kernel/pci-calgary.c +43 -1
Index: linux/arch/x86_64/kernel/pci-calgary.c
===================================================================
@@ -52,7 +52,8 @@
 #define ONE_BASED_CHASSIS_NUM   1
 
 /* register offsets inside the host bridge space */
-#define PHB_CSR_OFFSET		0x0110
+#define CALGARY_CONFIG_REG	0x0108
+#define PHB_CSR_OFFSET		0x0110 /* Channel Status */
 #define PHB_PLSSR_OFFSET	0x0120
 #define PHB_CONFIG_RW_OFFSET	0x0160
 #define PHB_IOBASE_BAR_LOW	0x0170
@@ -83,6 +84,8 @@
 #define TAR_VALID		0x0000000000000008UL
 /* CSR (Channel/DMA Status Register) */
 #define CSR_AGENT_MASK		0xffe0ffff
+/* CCR (Calgary Configuration Register) */
+#define CCR_2SEC_TIMEOUT        0x000000000000000EUL
 
 #define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
 #define MAX_NUM_CHASSIS		8 /* max number of chassis */
@@ -732,6 +735,38 @@ static void calgary_watchdog(unsigned lo
 	}
 }
 
+static void __init calgary_increase_split_completion_timeout(void __iomem *bbar,
+	unsigned char busnum)
+{
+	u64 val64;
+	void __iomem *target;
+	unsigned long phb_shift = -1;
+	u64 mask;
+
+	switch (busno_to_phbid(busnum)) {
+	case 0: phb_shift = (63 - 19);
+		break;
+	case 1: phb_shift = (63 - 23);
+		break;
+	case 2: phb_shift = (63 - 27);
+		break;
+	case 3: phb_shift = (63 - 35);
+		break;
+	default:
+		BUG_ON(busno_to_phbid(busnum));
+	}
+
+	target = calgary_reg(bbar, CALGARY_CONFIG_REG);
+	val64 = be64_to_cpu(readq(target));
+
+	/* zero out this PHB's timer bits */
+	mask = ~(0xFUL << phb_shift);
+	val64 &= mask;
+	val64 |= (CCR_2SEC_TIMEOUT << phb_shift);
+	writeq(cpu_to_be64(val64), target);
+	readq(target); /* flush */
+}
+
 static void __init calgary_enable_translation(struct pci_dev *dev)
 {
 	u32 val32;
@@ -756,6 +791,13 @@ static void __init calgary_enable_transl
 	writel(cpu_to_be32(val32), target);
 	readl(target); /* flush */
 
+	/*
+	 * Give split completion a longer timeout on bus 1 for aic94xx
+	 * http://bugzilla.kernel.org/show_bug.cgi?id=7180
+	 */
+	if (busnum == 1)
+		calgary_increase_split_completion_timeout(bbar, busnum);
+
 	init_timer(&tbl->watchdog_timer);
 	tbl->watchdog_timer.function = &calgary_watchdog;
 	tbl->watchdog_timer.data = (unsigned long)dev;
#3 lore raw

Re: [PATCH] [2/2] x86_64: increase PHB1 split transaction timeout

Quoted 24 lines · Andi Kleen

Index: linux/arch/x86_64/kernel/pci-calgary.c
===================================================================

arch/x86_64/kernel/pci-calgary.c +4 -1
@@ -52,7 +52,8 @@
 #define ONE_BASED_CHASSIS_NUM   1
 
 /* register offsets inside the host bridge space */
-#define PHB_CSR_OFFSET		0x0110
+#define CALGARY_CONFIG_REG	0x0108
+#define PHB_CSR_OFFSET		0x0110 /* Channel Status */
 #define PHB_PLSSR_OFFSET	0x0120
 #define PHB_CONFIG_RW_OFFSET	0x0160
 #define PHB_IOBASE_BAR_LOW	0x0170
@@ -83,6 +84,8 @@
 #define TAR_VALID		0x0000000000000008UL
 /* CSR (Channel/DMA Status Register) */
 #define CSR_AGENT_MASK		0xffe0ffff
+/* CCR (Calgary Configuration Register) */
+#define CCR_2SEC_TIMEOUT        0x000000000000000EUL
 
 #define MAX_NUM_OF_PHBS		8 /* how many PHBs in total? */
 #define MAX_NUM_CHASSIS		8 /* max number of chassis */

arch/x86_64/kernel/pci-calgary.c static void calgary_watchdog(unsigned lo · line 743

Quoted 9 lines
arch/x86_64/kernel/pci-calgary.c +6 -0
@@ -732,6 +735,38 @@ static void calgary_watchdog(unsigned lo
 	}
 }
 
+static void __init calgary_increase_split_completion_timeout(void __iomem *bbar,
+	unsigned char busnum)
+{
+	u64 val64;
+	void __iomem *target;
+	unsigned long phb_shift = -1;

The initialization of this to -1 is unclear to me since we fall through to BUG_ON() if busno_to_phbid() returns anything under than 0-3. A shift value of MAX_ULONG is never appropriate.

Quoted 49 lines
arch/x86_64/kernel/pci-calgary.c +33 -1
+	u64 mask;
+
+	switch (busno_to_phbid(busnum)) {
+	case 0: phb_shift = (63 - 19);
+		break;
+	case 1: phb_shift = (63 - 23);
+		break;
+	case 2: phb_shift = (63 - 27);
+		break;
+	case 3: phb_shift = (63 - 35);
+		break;
+	default:
+		BUG_ON(busno_to_phbid(busnum));
+	}
+
+	target = calgary_reg(bbar, CALGARY_CONFIG_REG);
+	val64 = be64_to_cpu(readq(target));
+
+	/* zero out this PHB's timer bits */
+	mask = ~(0xFUL << phb_shift);
+	val64 &= mask;
+	val64 |= (CCR_2SEC_TIMEOUT << phb_shift);
+	writeq(cpu_to_be64(val64), target);
+	readq(target); /* flush */
+}
+
 static void __init calgary_enable_translation(struct pci_dev *dev)
 {
 	u32 val32;
@@ -756,6 +791,13 @@ static void __init calgary_enable_transl
 	writel(cpu_to_be32(val32), target);
 	readl(target); /* flush */
 
+	/*
+	 * Give split completion a longer timeout on bus 1 for aic94xx
+	 * http://bugzilla.kernel.org/show_bug.cgi?id=7180
+	 */
+	if (busnum == 1)
+		calgary_increase_split_completion_timeout(bbar, busnum);
+
 	init_timer(&tbl->watchdog_timer);
 	tbl->watchdog_timer.function = &calgary_watchdog;
 	tbl->watchdog_timer.data = (unsigned long)dev;
-

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

#4 lore raw

Re: [PATCH] [2/2] x86_64: increase PHB1 split transaction timeout

Quoted 10 lines · David Rientjes

arch/x86_64/kernel/pci-calgary.c static void calgary_watchdog(unsigned lo · line 743

Quoted 6 lines
arch/x86_64/kernel/pci-calgary.c +6 -0
+static void __init calgary_increase_split_completion_timeout(void __iomem *bbar,
+	unsigned char busnum)
+{
+	u64 val64;
+	void __iomem *target;
+	unsigned long phb_shift = -1;

The initialization of this to -1 is unclear to me since we fall through to BUG_ON() if busno_to_phbid() returns anything under than 0-3. A shift value of MAX_ULONG is never appropriate.

Without the initialization gcc warns about 'phb_shift' potentially being used unitialized. I used '-1' exactly because it is never appropriate.

Cheers,
Muli