Skip to contentSkip to conversation

Adding code for new flash type to u-boot 1.1.4

U-Boot-Users Bob 2 participants 3 messages Oct 27, 2006

lore
Share & tools
lore

Bob

author
#0 lore raw

Hi,

I am new to u-boot. I would like to know what are the things needed to be done( source code added), to add a new flash type to u-boot.

Any kind of help, documentation etc is helpful.

Thank you very much in advance.

regards,
James

Signature · 5 lines
  Bob
  chindiyan at fastmail.fm

-- 
http://www.fastmail.fm - IMAP accessible web-mail
#1 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I am new to u-boot. I would like to know what are the things needed to be done( source code added), to add a new flash type to u-boot.

If your flash is CFI conformant, then just use the CFI driver.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To understand a program you must become  both  the  machine  and  the
program.
author
#2 lore raw

Thank you very much Wolfgang.
I will try to understand the flow of CFI driver.

Regards,
James

Quoted 17 lines · Wolfgang Denk

In message <[email protected]> you

Quoted 3 lines · wrote:

I am new to u-boot. I would like to know what are the things needed to be done( source code added), to add a new flash type to u-boot.

If your flash is CFI conformant, then just use the CFI driver.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To understand a program you must become  both  the  machine  and  the
program.
Signature · 5 lines
  Bob
  chindiyan at fastmail.fm

-- 
http://www.fastmail.fm - Choose from over 50 domains or use your own