Skip to contentSkip to conversation

Sector size with CFI driver?

U-Boot-Users Yogi 1 participant 1 message Nov 1, 2006

lore
Share & tools
lore

Yogi

author
#0 lore raw

Yeah, you can use the field at 4F (9E). If it is 2 it is bottom boot. If it is 3 it is top boot. See page 27, Table 4-4 CFI Mode: Primary Vendor-Specific Extended Querry Data Values in the data sheet.
Thanks
Yogi

----- Original Message ----
From: Timur Tabi <[email protected]>
To: Tolunay Orkun <[email protected]>
Cc: u-boot-users at lists.sourceforge.net; Stefan Roese <[email protected]>
Sent: Wednesday, November 1, 2006 9:52:44 AM
Subject: Re: [U-Boot-Users] Sector size with CFI driver?

Quoted 3 lines · Tolunay Orkun

Secondly, it looks like the erase region list returned is reversed for this flash chip. I think, CFG_CFI_GEOMETRY_REVERSED would be more appropriate.

I like that one better.

Quoted 5 lines

Perhaps you can identify such a reserved list from the CFI tables on the flash. If this can be done no macros would be needed to handle this case.

Can you tell me the exact part number for your flash. I would like to read the data sheet and compare its CFI structures if I can.

29LV640BTTC-90G

You can find the specs here by going to http://www.macronix.com, clicking on "Flash Memory", and then scrolling to the bottom for this entry:

MX29LV640B T/B 3V x8/x16 Boot sector 90/120 48-TSOP, 63-CSP

I'm using the 48-pin version.

Signature · 12 lines
Timur Tabi
Linux Kernel Developer @ Freescale

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users