Skip to contentSkip to conversation

i8042: remove polling timer (v6)

RFT/PATCH Dmitry Torokhov 4 participants 16 messages Aug 24, 2006 – Nov 20, 2006

lore
Share & tools
lore
#0 lore raw

Hi everyone,

Here is another version of the patch removing polling timer from i8042 which is needed if we want tickless kernel. Keyboards should now work on boxes that do not have mouse plugged in. PLease give it a test.

Signature · 1,127 lines
Dmitry

Input: i8042 - get rid of polling timer

Remove polling timer that was used to detect keybord/mice hotplug and
register both IRQs right away instead of waiting for a driver to
attach to a port.

Signed-off-by: Dmitry Torokhov <[email protected]>
---

 drivers/input/serio/i8042.c |  741 +++++++++++++++++++++++---------------------
 drivers/input/serio/i8042.h |    9 
 2 files changed, 388 insertions(+), 362 deletions(-)

Index: work/drivers/input/serio/i8042.c
===================================================================
--- work.orig/drivers/input/serio/i8042.c
+++ work/drivers/input/serio/i8042.c
@@ -90,46 +90,24 @@ static DEFINE_SPINLOCK(i8042_lock);
 struct i8042_port {
 	struct serio *serio;
 	int irq;
-	unsigned char disable;
-	unsigned char irqen;
 	unsigned char exists;
 	signed char mux;
-	char name[8];
 };
 
 #define I8042_KBD_PORT_NO	0
 #define I8042_AUX_PORT_NO	1
 #define I8042_MUX_PORT_NO	2
 #define I8042_NUM_PORTS		(I8042_NUM_MUX_PORTS + 2)
-static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
-	{
-		.disable	= I8042_CTR_KBDDIS,
-		.irqen		= I8042_CTR_KBDINT,
-		.mux		= -1,
-		.name		= "KBD",
-	},
-	{
-		.disable	= I8042_CTR_AUXDIS,
-		.irqen		= I8042_CTR_AUXINT,
-		.mux		= -1,
-		.name		= "AUX",
-	}
-};
+
+static struct i8042_port i8042_ports[I8042_NUM_PORTS];
 
 static unsigned char i8042_initial_ctr;
 static unsigned char i8042_ctr;
-static unsigned char i8042_mux_open;
 static unsigned char i8042_mux_present;
-static struct timer_list i8042_timer;
+static unsigned char i8042_kbd_irq_registered;
+static unsigned char i8042_aux_irq_registered;
 static struct platform_device *i8042_platform_device;
 
-
-/*
- * Shared IRQ's require a device pointer, but this driver doesn't support
- * multiple devices
- */
-#define i8042_request_irq_cookie (&i8042_timer)
-
 static irqreturn_t i8042_interrupt(int irq, void *dev_id, struct pt_regs *regs);
 
 /*
@@ -141,6 +119,7 @@ static irqreturn_t i8042_interrupt(int i
 static int i8042_wait_read(void)
 {
 	int i = 0;
+
 	while ((~i8042_read_status() & I8042_STR_OBF) && (i < I8042_CTL_TIMEOUT)) {
 		udelay(50);
 		i++;
@@ -151,6 +130,7 @@ static int i8042_wait_read(void)
 static int i8042_wait_write(void)
 {
 	int i = 0;
+
 	while ((i8042_read_status() & I8042_STR_IBF) && (i < I8042_CTL_TIMEOUT)) {
 		udelay(50);
 		i++;
@@ -192,48 +172,57 @@ static int i8042_flush(void)
  * encoded in bits 8-11 of the command number.
  */
 
-static int i8042_command(unsigned char *param, int command)
+static int __i8042_command(unsigned char *param, int command)
 {
-	unsigned long flags;
-	int i, retval, auxerr = 0;
+	int i, error;
 
 	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
 		return -1;
 
-	spin_lock_irqsave(&i8042_lock, flags);
-
-	if ((retval = i8042_wait_write()))
-		goto out;
+	error = i8042_wait_write();
+	if (error)
+		return error;
 
 	dbg("%02x -> i8042 (command)", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
-		if ((retval = i8042_wait_write()))
-			goto out;
+		error = i8042_wait_write();
+		if (error)
+			return error;
 		dbg("%02x -> i8042 (parameter)", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
-		if ((retval = i8042_wait_read()))
-			goto out;
+		error = i8042_wait_read();
+		if (error) {
+			dbg("     -- i8042 (timeout)");
+			return error;
+		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			retval = auxerr = -1;
-			goto out;
+			dbg("     -- i8042 (auxerr)");
+			return -1;
 		}
 
 		param[i] = i8042_read_data();
 		dbg("%02x <- i8042 (return)", param[i]);
 	}
 
-	if (retval)
-		dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
+	return 0;
+}
 
- out:
+static int i8042_command(unsigned char *param, int command)
+{
+	unsigned long flags;
+	int retval;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+	retval = __i8042_command(param, command);
 	spin_unlock_irqrestore(&i8042_lock, flags);
+
 	return retval;
 }
 
@@ -248,7 +237,7 @@ static int i8042_kbd_write(struct serio 
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	if(!(retval = i8042_wait_write())) {
+	if (!(retval = i8042_wait_write())) {
 		dbg("%02x -> i8042 (kbd-data)", c);
 		i8042_write_data(c);
 	}
@@ -287,100 +276,6 @@ static int i8042_aux_write(struct serio 
 }
 
 /*
- * i8042_activate_port() enables port on a chip.
- */
-
-static int i8042_activate_port(struct i8042_port *port)
-{
-	if (!port->serio)
-		return -1;
-
-	i8042_flush();
-
-	/*
-	 * Enable port again here because it is disabled if we are
-	 * resuming (normally it is enabled already).
-	 */
-	i8042_ctr &= ~port->disable;
-
-	i8042_ctr |= port->irqen;
-
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		i8042_ctr &= ~port->irqen;
-		return -1;
-	}
-
-	return 0;
-}
-
-
-/*
- * i8042_open() is called when a port is open by the higher layer.
- * It allocates the interrupt and calls i8042_enable_port.
- */
-
-static int i8042_open(struct serio *serio)
-{
-	struct i8042_port *port = serio->port_data;
-
-	if (port->mux != -1)
-		if (i8042_mux_open++)
-			return 0;
-
-	if (request_irq(port->irq, i8042_interrupt,
-			IRQF_SHARED, "i8042", i8042_request_irq_cookie)) {
-		printk(KERN_ERR "i8042.c: Can't get irq %d for %s, unregistering the port.\n", port->irq, port->name);
-		goto irq_fail;
-	}
-
-	if (i8042_activate_port(port)) {
-		printk(KERN_ERR "i8042.c: Can't activate %s, unregistering the port\n", port->name);
-		goto activate_fail;
-	}
-
-	i8042_interrupt(0, NULL, NULL);
-
-	return 0;
-
- activate_fail:
-	free_irq(port->irq, i8042_request_irq_cookie);
-
- irq_fail:
-	serio_unregister_port_delayed(serio);
-
-	return -1;
-}
-
-/*
- * i8042_close() frees the interrupt, so that it can possibly be used
- * by another driver. We never know - if the user doesn't have a mouse,
- * the BIOS could have used the AUX interrupt for PCI.
- */
-
-static void i8042_close(struct serio *serio)
-{
-	struct i8042_port *port = serio->port_data;
-
-	if (port->mux != -1)
-		if (--i8042_mux_open)
-			return;
-
-	i8042_ctr &= ~port->irqen;
-
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042.c: Can't write CTR while closing %s.\n", port->name);
-/*
- * We still want to continue and free IRQ so if more data keeps coming in
- * kernel will just ignore the irq.
- */
-	}
-
-	free_irq(port->irq, i8042_request_irq_cookie);
-
-	i8042_flush();
-}
-
-/*
  * i8042_start() is called by serio core when port is about to finish
  * registering. It will mark port as existing so i8042_interrupt can
  * start sending data through it.
@@ -423,8 +318,6 @@ static irqreturn_t i8042_interrupt(int i
 	unsigned int port_no;
 	int ret;
 
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
-
 	spin_lock_irqsave(&i8042_lock, flags);
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
@@ -480,8 +373,8 @@ static irqreturn_t i8042_interrupt(int i
 
 	port = &i8042_ports[port_no];
 
-	dbg("%02x <- i8042 (interrupt, %s, %d%s%s)",
-	    data, port->name, irq,
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
 
@@ -494,6 +387,58 @@ static irqreturn_t i8042_interrupt(int i
 }
 
 /*
+ * i8042_enable_kbd_port enables keybaord port on chip
+ */
+
+static int i8042_enable_kbd_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_KBDDIS;
+	i8042_ctr |= I8042_CTR_KBDINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_aux_port enables AUX (mouse) port on chip
+ */
+
+static int i8042_enable_aux_port(void)
+{
+	i8042_ctr &= ~I8042_CTR_AUXDIS;
+	i8042_ctr |= I8042_CTR_AUXINT;
+
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/*
+ * i8042_enable_mux_ports enables 4 individual AUX ports after
+ * the controller has been switched into Multiplexed mode
+ */
+
+static int i8042_enable_mux_ports(void)
+{
+	unsigned char param;
+	int i;
+
+	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+		i8042_command(&param, I8042_CMD_MUX_PFX + i);
+		i8042_command(&param, I8042_CMD_AUX_ENABLE);
+	}
+
+	return i8042_enable_aux_port();
+}
+
+/*
  * i8042_set_mux_mode checks whether the controller has an active
  * multiplexor and puts the chip into Multiplexed (1) or Legacy (0) mode.
  */
@@ -510,8 +455,7 @@ static int i8042_set_mux_mode(unsigned i
 
 /*
  * Internal loopback test - send three bytes, they should come back from the
- * mouse interface, the last should be version. Note that we negate mouseport
- * command responses for the i8042_check_aux() routine.
+ * mouse interface, the last should be version.
  */
 
 	param = 0xf0;
@@ -530,67 +474,67 @@ static int i8042_set_mux_mode(unsigned i
 	return 0;
 }
 
-
 /*
- * i8042_enable_mux_ports enables 4 individual AUX ports after
- * the controller has been switched into Multiplexed mode
+ * i8042_check_mux() checks whether the controller supports the PS/2 Active
+ * Multiplexing specification by Synaptics, Phoenix, Insyde and
+ * LCS/Telegraphics.
  */
 
-static int i8042_enable_mux_ports(void)
+static int __devinit i8042_check_mux(void)
 {
-	unsigned char param;
-	int i;
+	unsigned char mux_version;
+
+	if (i8042_set_mux_mode(1, &mux_version))
+		return -1;
+
 /*
- * Disable all muxed ports by disabling AUX.
+ * Workaround for interference with USB Legacy emulation
+ * that causes a v10.12 MUX to be found.
  */
+	if (mux_version == 0xAC)
+		return -1;
+
+	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
+/*
+ * Disable all muxed ports by disabling AUX.
+ */
 	i8042_ctr |= I8042_CTR_AUXDIS;
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
-		return -1;
+		return -EIO;
 	}
 
-/*
- * Enable all muxed ports.
- */
-
-	for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-		i8042_command(&param, I8042_CMD_MUX_PFX + i);
-		i8042_command(&param, I8042_CMD_AUX_ENABLE);
-	}
+	i8042_mux_present = 1;
 
 	return 0;
 }
 
-
 /*
- * i8042_check_mux() checks whether the controller supports the PS/2 Active
- * Multiplexing specification by Synaptics, Phoenix, Insyde and
- * LCS/Telegraphics.
+ * The following is used to test AUX IRQ delivery.
  */
+static struct completion i8042_aux_irq_delivered __devinitdata;
+static int i8042_irq_being_tested __devinitdata;
 
-static int __devinit i8042_check_mux(void)
+static irqreturn_t __devinit i8042_aux_test_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
-	unsigned char mux_version;
-
-	if (i8042_set_mux_mode(1, &mux_version))
-		return -1;
-
-	/* Workaround for interference with USB Legacy emulation */
-	/* that causes a v10.12 MUX to be found. */
-	if (mux_version == 0xAC)
-		return -1;
-
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
-		(mux_version >> 4) & 0xf, mux_version & 0xf);
+	unsigned long flags;
+	unsigned char str, data;
 
-	if (i8042_enable_mux_ports())
-		return -1;
+	spin_lock_irqsave(&i8042_lock, flags);
+	str = i8042_read_status();
+	if (str & I8042_STR_OBF) {
+		data = i8042_read_data();
+		if (i8042_irq_being_tested &&
+		    data == 0xa5 && (str & I8042_STR_AUXDATA))
+			complete(&i8042_aux_irq_delivered);
+	}
+	spin_unlock_irqrestore(&i8042_lock, flags);
 
-	i8042_mux_present = 1;
-	return 0;
+	return IRQ_HANDLED;
 }
 
 
@@ -601,18 +545,10 @@ static int __devinit i8042_check_mux(voi
 
 static int __devinit i8042_check_aux(void)
 {
+	int retval = -1;
+	int irq_registered = 0;
+	unsigned long flags;
 	unsigned char param;
-	static int i8042_check_aux_cookie;
-
-/*
- * Check if AUX irq is available. If it isn't, then there is no point
- * in trying to detect AUX presence.
- */
-
-	if (request_irq(i8042_ports[I8042_AUX_PORT_NO].irq, i8042_interrupt,
-			IRQF_SHARED, "i8042", &i8042_check_aux_cookie))
-                return -1;
-	free_irq(i8042_ports[I8042_AUX_PORT_NO].irq, &i8042_check_aux_cookie);
 
 /*
  * Get rid of bytes in the queue.
@@ -637,9 +573,9 @@ static int __devinit i8042_check_aux(voi
  * AUX ports, we test for this only when the LOOP command failed.
  */
 
-		if (i8042_command(&param, I8042_CMD_AUX_TEST)
-			|| (param && param != 0xfa && param != 0xff))
-				return -1;
+		if (i8042_command(&param, I8042_CMD_AUX_TEST) ||
+		    (param && param != 0xfa && param != 0xff))
+			return -1;
 	}
 
 /*
@@ -659,54 +595,80 @@ static int __devinit i8042_check_aux(voi
 		return -1;
 
 /*
- * Disable the interface.
+ * Test AUX IRQ delivery to make sure BIOS did not grab the IRQ and
+ * used it for a PCI card or somethig else.
  */
 
-	i8042_ctr |= I8042_CTR_AUXDIS;
-	i8042_ctr &= ~I8042_CTR_AUXINT;
+	if (i8042_noloop) {
+/*
+ * Without LOOP command we can't test AUX IRQ delivery. Assume the port
+ * is working and hope we are right.
+ */
+		retval = 0;
+		goto out;
+	}
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		return -1;
+	if (request_irq(I8042_AUX_IRQ, i8042_aux_test_irq, IRQF_SHARED,
+			"i8042", i8042_platform_device))
+		goto out;
 
-	return 0;
-}
+	irq_registered = 1;
+
+	if (i8042_enable_aux_port())
+		goto out;
+
+	spin_lock_irqsave(&i8042_lock, flags);
+
+	init_completion(&i8042_aux_irq_delivered);
+	i8042_irq_being_tested = 1;
+
+	param = 0xa5;
+	retval = __i8042_command(&param, I8042_CMD_AUX_LOOP & 0xf0ff);
 
+	spin_unlock_irqrestore(&i8042_lock, flags);
 
+	if (retval)
+		goto out;
+
+	if (wait_for_completion_timeout(&i8042_aux_irq_delivered,
+					msecs_to_jiffies(250)) == 0) {
 /*
- * i8042_port_register() marks the device as existing,
- * registers it, and reports to the user.
+ * AUX IRQ was never delivered so we need to flush the controller to
+ * get rid of the byte we put there; otherwise keyboard may not work.
  */
+		i8042_flush();
+		retval = -1;
+	}
 
-static int __devinit i8042_port_register(struct i8042_port *port)
-{
-	i8042_ctr &= ~port->disable;
+ out:
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042.c: Can't write CTR while registering.\n");
-		kfree(port->serio);
-		port->serio = NULL;
-		i8042_ctr |= port->disable;
-		return -EIO;
-	}
+/*
+ * Disable the interface.
+ */
 
-	printk(KERN_INFO "serio: i8042 %s port at %#lx,%#lx irq %d\n",
-	       port->name,
-	       (unsigned long) I8042_DATA_REG,
-	       (unsigned long) I8042_COMMAND_REG,
-	       port->irq);
+	i8042_ctr |= I8042_CTR_AUXDIS;
+	i8042_ctr &= ~I8042_CTR_AUXINT;
 
-	serio_register_port(port->serio);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+		retval = -1;
 
-	return 0;
-}
+	if (irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
 
+	return retval;
+}
 
-static void i8042_timer_func(unsigned long data)
+static int i8042_controller_check(void)
 {
-	i8042_interrupt(0, NULL, NULL);
+	if (i8042_flush() == I8042_BUFFER_SIZE) {
+		printk(KERN_ERR "i8042.c: No controller found.\n");
+		return -ENODEV;
+	}
+
+	return 0;
 }
 
-static int i8042_ctl_test(void)
+static int i8042_controller_selftest(void)
 {
 	unsigned char param;
 
@@ -715,13 +677,13 @@ static int i8042_ctl_test(void)
 
 	if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
 		printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
-		return -1;
+		return -ENODEV;
 	}
 
 	if (param != I8042_RET_CTL_TEST) {
 		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
 			 param, I8042_RET_CTL_TEST);
-		return -1;
+		return -EIO;
 	}
 
 	return 0;
@@ -738,25 +700,12 @@ static int i8042_controller_init(void)
 	unsigned long flags;
 
 /*
- * Test the i8042. We need to know if it thinks it's working correctly
- * before doing anything else.
- */
-
-	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
-		return -1;
-	}
-
-	if (i8042_ctl_test())
-		return -1;
-
-/*
  * Save the CTR for restoral on unload / reboot.
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
 		printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
-		return -1;
+		return -EIO;
 	}
 
 	i8042_initial_ctr = i8042_ctr;
@@ -805,7 +754,7 @@ static int i8042_controller_init(void)
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
-		return -1;
+		return -EIO;
 	}
 
 	return 0;
@@ -813,15 +762,12 @@ static int i8042_controller_init(void)
 
 
 /*
- * Reset the controller.
+ * Reset the controller and reset CRT to the original value set by BIOS.
  */
+
 static void i8042_controller_reset(void)
 {
-/*
- * Reset the controller if requested.
- */
-
-	i8042_ctl_test();
+	i8042_flush();
 
 /*
  * Disable MUX mode if present.
@@ -831,12 +777,16 @@ static void i8042_controller_reset(void)
 		i8042_set_mux_mode(0, NULL);
 
 /*
- * Restore the original control register setting.
+ * Reset the controller if requested.
  */
 
-	i8042_ctr = i8042_initial_ctr;
+	i8042_controller_selftest();
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
+/*
+ * Restore the original control register setting.
+ */
+
+	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
 		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
 }
 
@@ -850,14 +800,12 @@ static void i8042_controller_cleanup(voi
 {
 	int i;
 
-	i8042_flush();
-
 /*
  * Reset anything that is connected to the ports.
  */
 
 	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].exists)
+		if (i8042_ports[i].serio)
 			serio_cleanup(i8042_ports[i].serio);
 
 	i8042_controller_reset();
@@ -913,8 +861,7 @@ static long i8042_panic_blink(long count
 
 static int i8042_suspend(struct platform_device *dev, pm_message_t state)
 {
-	del_timer_sync(&i8042_timer);
-	i8042_controller_reset();
+	i8042_controller_cleanup();
 
 	return 0;
 }
@@ -926,33 +873,39 @@ static int i8042_suspend(struct platform
 
 static int i8042_resume(struct platform_device *dev)
 {
-	int i;
+	int error;
 
-	if (i8042_ctl_test())
-		return -1;
+	error = i8042_controller_check();
+	if (error)
+		return error;
 
-	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042: Can't write CTR\n");
-		return -1;
-	}
-
-	if (i8042_mux_present)
-		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING "i8042: failed to resume active multiplexor, mouse won't work.\n");
+	error = i8042_controller_selftest();
+	if (error)
+		return error;
 
 /*
- * Activate all ports.
+ * Restore pre-resume CTR value and disable all ports
  */
 
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		i8042_activate_port(&i8042_ports[i]);
+	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
+	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
+	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
+		printk(KERN_ERR "i8042: Can't write CTR to resume\n");
+		return -EIO;
+	}
 
-/*
- * Restart timer (for polling "stuck" data)
- */
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+	if (i8042_mux_present) {
+		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
+			printk(KERN_WARNING
+				"i8042: failed to resume active multiplexor, "
+				"mouse won't work.\n");
+	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
+		i8042_enable_aux_port();
 
-	panic_blink = i8042_panic_blink;
+	if (i8042_ports[I8042_KBD_PORT_NO].serio)
+		i8042_enable_kbd_port();
+
+	i8042_interrupt(0, NULL, NULL);
 
 	return 0;
 }
@@ -978,24 +931,24 @@ static int __devinit i8042_create_kbd_po
 
 	serio->id.type		= i8042_direct ? SERIO_8042 : SERIO_8042_XL;
 	serio->write		= i8042_dumbkbd ? NULL : i8042_kbd_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
 	serio->start		= i8042_start;
 	serio->stop		= i8042_stop;
 	serio->port_data	= port;
 	serio->dev.parent	= &i8042_platform_device->dev;
-	strlcpy(serio->name, "i8042 Kbd Port", sizeof(serio->name));
+	strlcpy(serio->name, "i8042 KBD port", sizeof(serio->name));
 	strlcpy(serio->phys, I8042_KBD_PHYS_DESC, sizeof(serio->phys));
 
 	port->serio = serio;
+	port->irq = I8042_KBD_IRQ;
 
-	return i8042_port_register(port);
+	return 0;
 }
 
-static int __devinit i8042_create_aux_port(void)
+static int __devinit i8042_create_aux_port(int idx)
 {
 	struct serio *serio;
-	struct i8042_port *port = &i8042_ports[I8042_AUX_PORT_NO];
+	int port_no = idx < 0 ? I8042_AUX_PORT_NO : I8042_MUX_PORT_NO + idx;
+	struct i8042_port *port = &i8042_ports[port_no];
 
 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
 	if (!serio)
@@ -1003,111 +956,191 @@ static int __devinit i8042_create_aux_po
 
 	serio->id.type		= SERIO_8042;
 	serio->write		= i8042_aux_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
 	serio->start		= i8042_start;
 	serio->stop		= i8042_stop;
 	serio->port_data	= port;
 	serio->dev.parent	= &i8042_platform_device->dev;
-	strlcpy(serio->name, "i8042 Aux Port", sizeof(serio->name));
-	strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+	if (idx < 0) {
+		strlcpy(serio->name, "i8042 AUX port", sizeof(serio->name));
+		strlcpy(serio->phys, I8042_AUX_PHYS_DESC, sizeof(serio->phys));
+	} else {
+		snprintf(serio->name, sizeof(serio->name), "i8042 AUX%d port", idx);
+		snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, idx + 1);
+	}
 
 	port->serio = serio;
+	port->mux = idx;
+	port->irq = I8042_AUX_IRQ;
 
-	return i8042_port_register(port);
+	return 0;
 }
 
-static int __devinit i8042_create_mux_port(int index)
+static void __devinit i8042_free_kbd_port(void)
 {
-	struct serio *serio;
-	struct i8042_port *port = &i8042_ports[I8042_MUX_PORT_NO + index];
+	kfree(i8042_ports[I8042_KBD_PORT_NO].serio);
+	i8042_ports[I8042_KBD_PORT_NO].serio = NULL;
+}
 
-	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
-	if (!serio)
-		return -ENOMEM;
+static void __devinit i8042_free_aux_ports(void)
+{
+	int i;
 
-	serio->id.type		= SERIO_8042;
-	serio->write		= i8042_aux_write;
-	serio->open		= i8042_open;
-	serio->close		= i8042_close;
-	serio->start		= i8042_start;
-	serio->stop		= i8042_stop;
-	serio->port_data	= port;
-	serio->dev.parent	= &i8042_platform_device->dev;
-	snprintf(serio->name, sizeof(serio->name), "i8042 Aux-%d Port", index);
-	snprintf(serio->phys, sizeof(serio->phys), I8042_MUX_PHYS_DESC, index + 1);
+	for (i = I8042_AUX_PORT_NO; i < I8042_NUM_PORTS; i++) {
+		kfree(i8042_ports[i].serio);
+		i8042_ports[i].serio = NULL;
+	}
+}
 
-	*port = i8042_ports[I8042_AUX_PORT_NO];
-	port->exists = 0;
-	snprintf(port->name, sizeof(port->name), "AUX%d", index);
-	port->mux = index;
-	port->serio = serio;
+static void __devinit i8042_register_ports(void)
+{
+	int i;
 
-	return i8042_port_register(port);
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
+				i8042_ports[i].serio->name,
+				(unsigned long) I8042_DATA_REG,
+				(unsigned long) I8042_COMMAND_REG,
+				i8042_ports[i].irq);
+			serio_register_port(i8042_ports[i].serio);
+		}
+	}
 }
 
-static int __devinit i8042_probe(struct platform_device *dev)
+static void __devinit i8042_unregister_ports(void)
 {
-	int i, have_ports = 0;
-	int err;
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++) {
+		if (i8042_ports[i].serio) {
+			serio_unregister_port(i8042_ports[i].serio);
+			i8042_ports[i].serio = NULL;
+		}
+	}
+}
+
+static void i8042_free_irqs(void)
+{
+	if (i8042_aux_irq_registered)
+		free_irq(I8042_AUX_IRQ, i8042_platform_device);
+	if (i8042_kbd_irq_registered)
+		free_irq(I8042_KBD_IRQ, i8042_platform_device);
+
+	i8042_aux_irq_registered = i8042_kbd_irq_registered = 0;
+}
 
-	init_timer(&i8042_timer);
-	i8042_timer.function = i8042_timer_func;
+static int __devinit i8042_setup_aux(void)
+{
+	int (*aux_enable)(void);
+	int error;
+	int i;
 
-	if (i8042_controller_init())
+	if (i8042_check_aux())
 		return -ENODEV;
 
-	if (!i8042_noaux && !i8042_check_aux()) {
-		if (!i8042_nomux && !i8042_check_mux()) {
-			for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
-				err = i8042_create_mux_port(i);
-				if (err)
-					goto err_unregister_ports;
-			}
-		} else {
-			err = i8042_create_aux_port();
-			if (err)
-				goto err_unregister_ports;
+	if (i8042_nomux || i8042_check_mux()) {
+		error = i8042_create_aux_port(-1);
+		if (error)
+			goto err_free_ports;
+		aux_enable = i8042_enable_aux_port;
+	} else {
+		for (i = 0; i < I8042_NUM_MUX_PORTS; i++) {
+			error = i8042_create_aux_port(i);
+			if (error)
+				goto err_free_ports;
 		}
-		have_ports = 1;
+		aux_enable = i8042_enable_mux_ports;
 	}
 
-	if (!i8042_nokbd) {
-		err = i8042_create_kbd_port();
-		if (err)
-			goto err_unregister_ports;
-		have_ports = 1;
-	}
+	error = request_irq(I8042_AUX_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_ports;
 
-	if (!have_ports) {
-		err = -ENODEV;
-		goto err_controller_cleanup;
-	}
+	if (aux_enable())
+		goto err_free_irq;
 
-	mod_timer(&i8042_timer, jiffies + I8042_POLL_PERIOD);
+	i8042_aux_irq_registered = 1;
 	return 0;
 
- err_unregister_ports:
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].serio)
-			serio_unregister_port(i8042_ports[i].serio);
- err_controller_cleanup:
-	i8042_controller_cleanup();
+ err_free_irq:
+	free_irq(I8042_AUX_IRQ, i8042_platform_device);
+ err_free_ports:
+	i8042_free_aux_ports();
+	return error;
+}
 
-	return err;
+static int __devinit i8042_setup_kbd(void)
+{
+	int error;
+
+	error = i8042_create_kbd_port();
+	if (error)
+		return error;
+
+	error = request_irq(I8042_KBD_IRQ, i8042_interrupt, IRQF_SHARED,
+			    "i8042", i8042_platform_device);
+	if (error)
+		goto err_free_port;
+
+	error = i8042_enable_kbd_port();
+	if (error)
+		goto err_free_irq;
+
+	i8042_kbd_irq_registered = 1;
+	return 0;
+
+ err_free_irq:
+	free_irq(I8042_KBD_IRQ, i8042_platform_device);
+ err_free_port:
+	i8042_free_kbd_port();
+	return error;
 }
 
-static int __devexit i8042_remove(struct platform_device *dev)
+static int __devinit i8042_probe(struct platform_device *dev)
 {
-	int i;
+	int error;
 
-	i8042_controller_cleanup();
+	error = i8042_controller_selftest();
+	if (error)
+		return error;
+
+	error = i8042_controller_init();
+	if (error)
+		return error;
+
+	if (!i8042_noaux) {
+		error = i8042_setup_aux();
+		if (error && error != -ENODEV && error != -EBUSY)
+			goto out_fail;
+	}
 
-	for (i = 0; i < I8042_NUM_PORTS; i++)
-		if (i8042_ports[i].exists)
-			serio_unregister_port(i8042_ports[i].serio);
+	if (!i8042_nokbd) {
+		error = i8042_setup_kbd();
+		if (error)
+			goto out_fail;
+	}
 
-	del_timer_sync(&i8042_timer);
+/*
+ * Ok, everything is ready, let's register all serio ports
+ */
+	i8042_register_ports();
+
+	return 0;
+
+ out_fail:
+	i8042_free_aux_ports();	/* in case KBD failed but AUX not */
+	i8042_free_irqs();
+	i8042_controller_reset();
+
+	return error;
+}
+
+static int __devexit i8042_remove(struct platform_device *dev)
+{
+	i8042_unregister_ports();
+	i8042_free_irqs();
+	i8042_controller_reset();
 
 	return 0;
 }
@@ -1134,8 +1167,9 @@ static int __init i8042_init(void)
 	if (err)
 		return err;
 
-	i8042_ports[I8042_AUX_PORT_NO].irq = I8042_AUX_IRQ;
-	i8042_ports[I8042_KBD_PORT_NO].irq = I8042_KBD_IRQ;
+	err = i8042_controller_check();
+	if (err)
+		goto err_platform_exit;
 
 	err = platform_driver_register(&i8042_driver);
 	if (err)
@@ -1151,6 +1185,8 @@ static int __init i8042_init(void)
 	if (err)
 		goto err_free_device;
 
+	panic_blink = i8042_panic_blink;
+
 	return 0;
 
  err_free_device:
@@ -1167,7 +1203,6 @@ static void __exit i8042_exit(void)
 {
 	platform_device_unregister(i8042_platform_device);
 	platform_driver_unregister(&i8042_driver);
-
 	i8042_platform_exit();
 
 	panic_blink = NULL;
Index: work/drivers/input/serio/i8042.h
===================================================================
--- work.orig/drivers/input/serio/i8042.h
+++ work/drivers/input/serio/i8042.h
@@ -37,15 +37,6 @@
 #define I8042_CTL_TIMEOUT	10000
 
 /*
- * When the device isn't opened and it's interrupts aren't used, we poll it at
- * regular intervals to see if any characters arrived. If yes, we can start
- * probing for any mouse / keyboard connected. This is the period of the
- * polling.
- */
-
-#define I8042_POLL_PERIOD	HZ/20
-
-/*
  * Status register bits.
  */
#1 lore raw
Quoted 5 lines · Dmitry Torokhov

Hi everyone,

Here is another version of the patch removing polling timer from i8042 which is needed if we want tickless kernel. Keyboards should now work on boxes that do not have mouse plugged in. PLease give it a test.

What's the intent of this; just to allow tickless? Or is it also to make the i8042 driver less racy? I ask because I've applied this over (a modified) 2.6.18 on my Compaq Presario X1010us laptop which has been driving me crazy w/ Synaptics problems and keyboard problems
(intermittent, but frequent enough lately that I finally figured I
needed to do something about it).

If removing raciness is part of the goal, isn't the window in i8042_aux_write still a problem?

	if (port->mux == -1)
		retval = i8042_command(&c, I8042_CMD_AUX_SEND);
	else
		retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);

       /* i8042_command has re-enabled interrupts;
          what happens if real interrupt happens here, before we call

the ISR ourselves? */

	i8042_interrupt(0, NULL, NULL);
	return retval;
}

I don't really know if or how much the races in this driver are contributing to my problems (keyboard getting stuck repeating last key, or ignoring interrupts, or synaptics touchpad freezing, last of which requires cold boot to fix). Maybe more likely an ACPI thing?

Anyway, thought I'd point this out and see if this patch is actually going in someone's queue. I think I'll keep running w/ the patch since w/ the polling in there and HZ set to 1000, it seemed like there were an awful lot of opportunities for the driver to get confused, and even if it's not causing my problems it doesn't seem like it could be helping.

Dave

#2 lore raw
Quoted 24 lines · Dave Neuer
Quoted 5 lines · Dmitry Torokhov

Hi everyone,

Here is another version of the patch removing polling timer from i8042 which is needed if we want tickless kernel. Keyboards should now work on boxes that do not have mouse plugged in. PLease give it a test.

What's the intent of this; just to allow tickless? Or is it also to
make the i8042 driver less racy? I ask because I've applied this over (a modified) 2.6.18 on my Compaq Presario X1010us laptop which has been driving me crazy w/ Synaptics problems and keyboard problems
(intermittent, but frequent enough lately that I finally figured I
needed to do something about it).

If removing raciness is part of the goal, isn't the window in i8042_aux_write still a problem?

	if (port->mux == -1)
		retval = i8042_command(&c, I8042_CMD_AUX_SEND);
	else
		retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);

        /* i8042_command has re-enabled interrupts;
           what happens if real interrupt happens here, before we call
Quoted 6 lines

the ISR ourselves? */

	i8042_interrupt(0, NULL, NULL);
	return retval;
}

Hi Dave,

i8042_interrupt() uses spinlock to serialize access to the KBC so if real interrupt happens before we call i8042_interrupt() manually (and it should normally happen) it will just process the response and second i8042_interrupt() will be just a no-op.

Sorry, freel like crap, will try re-reading and responding to the rest of your email later...

Signature · 1 line
Dmitry
#3 lore raw
Quoted 31 lines · Dmitry Torokhov
Quoted 24 lines · Dave Neuer
Quoted 5 lines · Dmitry Torokhov

Hi everyone,

Here is another version of the patch removing polling timer from i8042 which is needed if we want tickless kernel. Keyboards should now work on boxes that do not have mouse plugged in. PLease give it a test.

What's the intent of this; just to allow tickless? Or is it also to
make the i8042 driver less racy? I ask because I've applied this over (a modified) 2.6.18 on my Compaq Presario X1010us laptop which has been driving me crazy w/ Synaptics problems and keyboard problems
(intermittent, but frequent enough lately that I finally figured I
needed to do something about it).

If removing raciness is part of the goal, isn't the window in i8042_aux_write still a problem?

	if (port->mux == -1)
		retval = i8042_command(&c, I8042_CMD_AUX_SEND);
	else
		retval = i8042_command(&c, I8042_CMD_MUX_SEND + port->mux);

        /* i8042_command has re-enabled interrupts;
           what happens if real interrupt happens here, before we call
Quoted 5 lines

the ISR ourselves? */

	i8042_interrupt(0, NULL, NULL);
	return retval;
}
Quoted 6 lines

Hi Dave,

i8042_interrupt() uses spinlock to serialize access to the KBC so if real interrupt happens before we call i8042_interrupt() manually (and it should normally happen) it will just process the response and second i8042_interrupt() will be just a no-op.

This would, however, create two reads of the i8042 controller back-to-back, which has been a problem on old i8042's: IIRC IBM documentation states that between the reads there should be a delay.

Signature · 2 lines
Vojtech Pavlik
Director SuSE Labs
#4 lore raw
Quoted 12 lines · Vojtech Pavlik
Quoted 6 lines · Dmitry Torokhov

Hi Dave,

i8042_interrupt() uses spinlock to serialize access to the KBC so if real interrupt happens before we call i8042_interrupt() manually (and it should normally happen) it will just process the response and second i8042_interrupt() will be just a no-op.

This would, however, create two reads of the i8042 controller back-to-back, which has been a problem on old i8042's: IIRC IBM documentation states that between the reads there should be a delay.

Maybe I'm missing something, (well actually I'm sure I'm missing somethng). Looking at the code again, it's unclear to me why there is even a call to the ISR in i8042_aux_write, since the latter function already calls i8042_read_data.

Dave

#5 lore raw
Quoted 6 lines · Dave Neuer

Maybe I'm missing something, (well actually I'm sure I'm missing somethng). Looking at the code again, it's unclear to me why there is even a call to the ISR in i8042_aux_write, since the latter function already calls i8042_read_data.

Whoops, sorry. I meant i8042_command, which is called by i8042_aux_write before the call to i8042_interrupt, already calls i8042_read_data.

Dave

#6 lore raw
Quoted 8 lines · Dave Neuer
Quoted 6 lines · Dave Neuer

Maybe I'm missing something, (well actually I'm sure I'm missing somethng). Looking at the code again, it's unclear to me why there is even a call to the ISR in i8042_aux_write, since the latter function already calls i8042_read_data.

Quoted 4 lines

Whoops, sorry. I meant i8042_command, which is called by i8042_aux_write before the call to i8042_interrupt, already calls i8042_read_data.

It only calls i8042_read_data() if command is supposed to return data. Neither I8042_CMD_AUX_SEND nor I8042_CMD_MUX_SEND wait fotr data to come back.

Anyway, I removed call to i8042_interrupt() from i8042_aux_write() because it is indeed unnecessary.

Signature · 1 line
Dmitry
#7 lore raw
Quoted 14 lines · Dmitry Torokhov
Quoted 8 lines · Dave Neuer
Quoted 6 lines · Dave Neuer

Maybe I'm missing something, (well actually I'm sure I'm missing somethng). Looking at the code again, it's unclear to me why there is even a call to the ISR in i8042_aux_write, since the latter function already calls i8042_read_data.

Quoted 4 lines

Whoops, sorry. I meant i8042_command, which is called by i8042_aux_write before the call to i8042_interrupt, already calls i8042_read_data.

Quoted 6 lines

It only calls i8042_read_data() if command is supposed to return data. Neither I8042_CMD_AUX_SEND nor I8042_CMD_MUX_SEND wait fotr data to come back.

Anyway, I removed call to i8042_interrupt() from i8042_aux_write() because it is indeed unnecessary.

It was there because some older i8042's will report an error byte (=> data) even though no device is connected, not just set error flags.

The unflushed byte in the FIFO then caused problems later on.

It may be that now it'll get disposed of correctly, I haven't looked at the code for a while.

Signature · 2 lines
Vojtech Pavlik
Director SuSE Labs
#8 lore raw
Quoted 22 lines · Vojtech Pavlik
Quoted 14 lines · Dmitry Torokhov
Quoted 8 lines · Dave Neuer
Quoted 6 lines · Dave Neuer

Maybe I'm missing something, (well actually I'm sure I'm missing somethng). Looking at the code again, it's unclear to me why there is even a call to the ISR in i8042_aux_write, since the latter function already calls i8042_read_data.

Quoted 4 lines

Whoops, sorry. I meant i8042_command, which is called by i8042_aux_write before the call to i8042_interrupt, already calls i8042_read_data.

Quoted 6 lines

It only calls i8042_read_data() if command is supposed to return data. Neither I8042_CMD_AUX_SEND nor I8042_CMD_MUX_SEND wait fotr data to come back.

Anyway, I removed call to i8042_interrupt() from i8042_aux_write() because it is indeed unnecessary.

Quoted 8 lines

It was there because some older i8042's will report an error byte (=> data) even though no device is connected, not just set error flags.

The unflushed byte in the FIFO then caused problems later on.

It may be that now it'll get disposed of correctly, I haven't looked at the code for a while.

By the time serio ports are registered and there are potential users of i8042_aux_write() we already requested AUX IRQ and I believe any arriving data should be automatically disposed through irq handler. It wasn't the case before, when we postponed requesting IRQ until the port was opened...

Signature · 1 line
Dmitry
#9 lore raw
In reply to Dave Neuer
Quoted 8 lines · Dave Neuer
Quoted 5 lines · Dmitry Torokhov

Hi everyone,

Here is another version of the patch removing polling timer from i8042 which is needed if we want tickless kernel. Keyboards should now work on boxes that do not have mouse plugged in. PLease give it a test.

What's the intent of this; just to allow tickless?

Yes, that was the intent.

Quoted 2 lines

Or is it also to
make the i8042 driver less racy?

I think we agree that i8042_aux_write() is not racy, do you see any other races in i8042?

Quoted 6 lines

I ask because I've applied this over
(a modified) 2.6.18 on my Compaq Presario X1010us laptop which has been driving me crazy w/ Synaptics problems and keyboard problems
(intermittent, but frequent enough lately that I finally figured I
needed to do something about it).

Have you tried limiting Synaptics rate to 40 packets per second (using psmouse.rate=40 option)? Some KBD can't handle full Synaptics rate of 80 pps; it usually manifests in keyboard troubles.

Quoted 5 lines

I don't really know if or how much the races in this driver are contributing to my problems (keyboard getting stuck repeating last key, or ignoring interrupts, or synaptics touchpad freezing, last of which requires cold boot to fix).

You mean even reloading psmouse module can't revive the touchpad?

Quoted 1 line

Maybe more likely an ACPI thing?

Coudl be.

Signature · 1 line
Dmitry
#10 lore raw
Quoted 6 lines · Dmitry Torokhov
Quoted 2 lines · Dave Neuer

Or is it also to
make the i8042 driver less racy?

I think we agree that i8042_aux_write() is not racy, do you see any other races in i8042?

No, the polling seemed like the big race.

Quoted 11 lines
Quoted 7 lines

I ask because I've applied this over
(a modified) 2.6.18 on my Compaq Presario X1010us laptop which has been driving me crazy w/ Synaptics problems and keyboard problems
(intermittent, but frequent enough lately that I finally figured I
needed to do something about it).

Have you tried limiting Synaptics rate to 40 packets per second (using psmouse.rate=40 option)? Some KBD can't handle full Synaptics rate of 80 pps; it usually manifests in keyboard troubles.

No, haven't tried that (first I've heard of it, thanks!)

As I said, I have had both keyboard and touchpad problems on this laptop (formerly more of the former, lately more of the latter); interestingly, after applying this patch I have had failures much less frequently (multiple instances of several days w/out failure w/ the laptop powered on continuously). Also interestingly, and unfortunately, that may be coincidence; I've discovered a use case that seems to reliably cause the touchpad to freeze up w/ or w/out the patch applied (selecting multiple items in modified file list in EasyTAG). Haven't looked into it yet, on the "hurts when I do this," "then don't do that" theory, but when I have time to look at the EasyTAG code and try to reason about what's happening, I will.

Quoted 8 lines
Quoted 6 lines

I don't really know if or how much the races in this driver are contributing to my problems (keyboard getting stuck repeating last key, or ignoring interrupts, or synaptics touchpad freezing, last of which requires cold boot to fix).

You mean even reloading psmouse module can't revive the touchpad?

Correct. Even rebooting doesn't help. Halt. Start.

Quoted 4 lines
Quoted 2 lines

Maybe more likely an ACPI thing?

Coudl be.

Hmmmm.

Dave

#11 lore raw
Quoted 13 lines · Dave Neuer

As I said, I have had both keyboard and touchpad problems on this laptop (formerly more of the former, lately more of the latter); interestingly, after applying this patch I have had failures much less frequently (multiple instances of several days w/out failure w/ the laptop powered on continuously). Also interestingly, and unfortunately, that may be coincidence; I've discovered a use case that seems to reliably cause the touchpad to freeze up w/ or w/out the patch applied (selecting multiple items in modified file list in EasyTAG). Haven't looked into it yet, on the "hurts when I do this," "then don't do that" theory, but when I have time to look at the EasyTAG code and try to reason about what's happening, I will.

It would be interesting to see dmesg of reloading psmouse module after touchpad freezes:

echo 1 > /sys/module/i8042/parameters/debug
rmmod psmouse
modprobe psmouse

BTW, what video driver are you using?

Signature · 1 line
Dmitry
#12 lore raw
Quoted 7 lines · Dmitry Torokhov

It would be interesting to see dmesg of reloading psmouse module after touchpad freezes:

echo 1 > /sys/module/i8042/parameters/debug
rmmod psmouse
modprobe psmouse

Sure, will try it.

Quoted 2 lines

BTW, what video driver are you using?

Free x.org Radeon driver (r200?).

Dave

#13 lore raw
In reply to Dmitry Torokhov
Quoted 3 lines · Dmitry Torokhov

It would be interesting to see dmesg of reloading psmouse module after touchpad freezes:

Whoops, forgot to mention; I have extra printk's in now. At the time of failure it's generally after several "psmouse lost syncs" and resyncs, and finally synaptics driver tries to do synaptics_reconnect => synaptics_query_hardware => synaptics_capability => synaptics_send_cmd => psmouse_sliced_command which fails (then the freeze).

#14 lore raw
In reply to Dmitry Torokhov

On 11/6/06, Dmitry Torokhov <[email protected]> wrote

Quoted 7 lines

It would be interesting to see dmesg of reloading psmouse module after touchpad freezes:

echo 1 > /sys/module/i8042/parameters/debug
rmmod psmouse
modprobe psmouse

Attached is the output of dmesg after the mouse has frozen and the above commands have been issued.

#15 lore raw
In reply to Dave Neuer
Quoted 5 lines · Dave Neuer
Quoted 4 lines · Dmitry Torokhov

Have you tried limiting Synaptics rate to 40 packets per second (using psmouse.rate=40 option)? Some KBD can't handle full Synaptics rate of 80 pps; it usually manifests in keyboard troubles.

This didn't seem to make a difference, but my reliable failure case turned out to not be so reliable after all, so I'm at a loss again.