[2.6.18] Suspend to ram and SATA
I have problem with suspend to ram, and my SATA drive. When I try:
echo mem > /sys/power/state
system goes standby, but when doing the resume it
would come back and have I/O errors similar like this ((copied from paper notes, the disk is no longer writable when the error happens)
kernel: journal commit I/O errorend_request: I/O error, dev sda, sector xxxxxxxx
sd 0:0:0:0: SCSI error return code: 0xxxxxx
Problem is similar like this:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
http://lkml.org/lkml/2005/9/23/97
I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
Hardware: HP/Compaq nx6310
Signature · 4 lines
Maciej Rutecki <[email protected]> http://www.unixy.pl LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 12 lines · Maciej Rutecki
I have problem with suspend to ram, and my SATA drive. When I try:
echo mem >
/sys/power/statesystem goes standby, but when doing the resume it
would come back and have I/O errors similar like this ((copied from paper notes, the disk is no longer writable when the error happens)kernel: journal commit I/O error
end_request: I/O error, dev sda, sector xxxxxxxx
sd 0:0:0:0: SCSI error return code: 0xxxxxx
Quoted 8 lines
Problem is similar like this:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
http://lkml.org/lkml/2005/9/23/97I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
Hardware: HP/Compaq nx6310
Can you please test 2.6.19-rc4 with CONFIG_DISABLE_CONSOLE_SUSPEND unset?
Rafael
Signature · 2 lines
You never change things by fighting the existing reality. R. Buckminster Fuller
Rafael J. Wysocki napisał(a):
Quoted 7 lines
Can you please test 2.6.19-rc4 with
CONFIG_DISABLE_CONSOLE_SUSPENDunset?Rafael
I don't have this option:
rutek:/usr/src/linux-2.6.19-rc4# cat .config | grep SUSPEND CONFIG_SOFTWARE_SUSPEND=y CONFIG_SUSPEND_SMP=y CONFIG_USB_SUSPEND=y
but suspend to ram seems to work (I did't see any problem). Thanks for help :-)
Signature · 4 lines
Maciej Rutecki <[email protected]> http://www.unixy.pl LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
Quoted 9 lines · Maciej Rutecki
Rafael J. Wysocki napisał(a):
Quoted 7 lines
Can you please test 2.6.19-rc4 with
CONFIG_DISABLE_CONSOLE_SUSPENDunset?Rafael
Quoted 6 lines
I don't have this option:
rutek:/usr/src/linux-2.6.19-rc4# cat .config | grep SUSPEND CONFIG_SOFTWARE_SUSPEND=y CONFIG_SUSPEND_SMP=y CONFIG_USB_SUSPEND=y
So it is not set which is OK.
Quoted 2 lines
but suspend to ram seems to work (I did't see any problem). Thanks for help :-)
You're welcome. :-)
Signature · 2 lines
You never change things by fighting the existing reality. R. Buckminster Fuller
Quoted 12 lines · Maciej Rutecki
I have problem with suspend to ram, and my SATA drive. When I try:
echo mem >
/sys/power/statesystem goes standby, but when doing the resume it
would come back and have I/O errors similar like this ((copied from paper notes, the disk is no longer writable when the error happens)kernel: journal commit I/O error
end_request: I/O error, dev sda, sector xxxxxxxx
sd 0:0:0:0: SCSI error return code: 0xxxxxx
Quoted 6 lines
Problem is similar like this:
http://marc.theaimsgroup.com/?l=linux-kernel&m=111409309804068&w=2
http://www.thinkwiki.org/wiki/Problems_with_SATA_and_Linux
http://lkml.org/lkml/2005/9/23/97I test it in 2.6.18.1 (with initrd) and 2.6.18 (with and without initrd).
for 2.6.18 there is a patch which makes AHCI sata behave correctly on suspend/resume. it was originally written by Forrest Zhao and is now included in the 2.6.19-rcX tree
you can apply the libata patch that went into 2.6.18-mm1. it is to be found in the broken-out dir of 2.6.18-mm1 and named git-libata-all-2.6.18-mm1.patch
when applying it to 2.6.18.1 you will get three rejects because the patches are already in 2.6.18.1. simply say 'n' -> 'n' on those three.
Quoted 8 lines
Hardware: HP/Compaq nx6310
Signature · 4 lines
Maciej Rutecki <[email protected]> http://www.unixy.pl LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)
gruss
mlo
--
Dipl.-Ing. Martin Lorenz
They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.
Benjamin Franklin
please encrypt your mail to me
GnuPG key-ID: F1AAD37D
get it here:
http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D
ICQ UIN: 33588107
Martin Lorenz napisał(a):
Quoted 5 lines
for 2.6.18 there is a patch which makes AHCI sata behave correctly on suspend/resume. it was originally written by Forrest Zhao and is now included in the 2.6.19-rcX tree
Quoted 7 lines
you can apply the libata patch that went into 2.6.18-mm1. it is to be found in the broken-out dir of 2.6.18-mm1 and named git-libata-all-2.6.18-mm1.patch
when applying it to 2.6.18.1 you will get three rejects because the patches are already in 2.6.18.1. simply say 'n' -> 'n' on those three.
A test this patch witch 2.6.18 and works great, thanks :-)
Signature · 4 lines
Maciej Rutecki <[email protected]> http://www.unixy.pl LTG - Linux Testers Group (http://www.stardust.webpages.pl/ltg/wiki/)