the Consel on SCC 1 for 8260
I have changed the MPC8260ads for my own board. now, my uboot is come up, but the serial port didn't print anything. I have set the boud rate, the IO port for SCC 1. And I am sure the hardware has no problem.
Is there anything left unchanged that I should change?
best regards.
handson
2006-11-06
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061106/e82d107c/attachment.htm