powerpc: Add Efika platform support
PATCH 1/1 powerpc: Add Efika platform support
Add Efika (http://www.bplan-gmbh.de/efika_spec_en.html) platform support for arch/powerpc
---
arch/powerpc/platforms/efika/setup.c +149 -0
@@ -0,0 +1,149 @@ +/* +* +* Efika 5K2 platform setup +* Some code really inspired from the lite5200b platform. +* +* Copyright (C) 2006 bplan GmbH +* +* This file is licensed under the terms of the GNU General Public License +* version 2. This program is licensed "as is" without any warranty of any +* kind, whether express or implied. +* +*/ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/utsrelease.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/timer.h> +#include <linux/pci.h> + +#include <asm/pgtable.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/rtas.h> +#include <asm/of_device.h> +#include <asm/mpc52xx.h> + +#include "efika.h" + +static void efika_show_cpuinfo (struct seq_file *m) +{ +struct device_node *root; +const char *revision =NULL ; +const char *codegendescription =NULL ; +const char *codegenvendor =NULL ; + + root =of_find_node_by_path ("/" ); +if (root) { + revision =get_property (root,"revision" ,NULL ); + codegendescription = +get_property (root,"CODEGEN,description" ,NULL ); + codegenvendor =get_property (root,"CODEGEN,vendor" ,NULL ); + +of_node_put (root); + } + +if (codegendescription) +seq_printf (m,"machine\t\t: %s\n" , codegendescription); +else +seq_printf (m,"machine\t\t: Efika\n" ); + +if (revision) +seq_printf (m,"revision\t: %s\n" , revision); + +if (codegenvendor) +seq_printf (m,"vendor\t\t: %s\n" , codegenvendor); + +of_node_put (root); +} + +static void __init efika_setup_arch (void ) +{ +rtas_initialize (); + +#ifdef CONFIG_BLK_DEV_INITRD + initrd_below_start_ok =1 ; + +if (initrd_start) +ROOT_DEV = Root_RAM0; + else +#endif +ROOT_DEV = Root_SDA2;/* sda2 (sda1 is for the kernel) */ + +efika_pcisetup (); + +if (ppc_md.progress) + ppc_md.progress ("Linux/PPC " UTS_RELEASE " runnung on Efika ;-)\n" ,0x0 ); +} + +static void __init efika_init (void ) +{ +struct device_node *np; +struct device_node *cnp =NULL ; +const u32 *base; + +/* Find every child of the SOC node and add it to of_platform */ + np =of_find_node_by_name (NULL ,"builtin" ); +if (np) { +char name[BUS_ID_SIZE ]; +while ((cnp =of_get_next_child (np, cnp))) { +strcpy (name, cnp->name); + + base =get_property (cnp,"reg" ,NULL ); +if (base ==NULL ) +continue ; + +snprintf (name+strlen (name),BUS_ID_SIZE ,"@%x" , *base); +of_platform_device_create (cnp, name,NULL ); + + printk(KERN_INFO EFIKA_PLATFORM_NAME" : Added %s (type '%s' at '%s') to the known devices\n", name, cnp->type, cnp->full_name); + } + } + +if (ppc_md.progress) + ppc_md.progress (" Have fun with your Efika! " ,0x7777 ); +} + +static int __init efika_probe (void ) +{ +char *model =of_get_flat_dt_prop (of_get_flat_dt_root (), +"model" ,NULL ); + +if (model ==NULL ) +return 0 ; +if (strcmp (model,"EFIKA5K2" )) +return 0 ; + +ISA_DMA_THRESHOLD = ~0L ; +DMA_MODE_READ =0x44 ; +DMA_MODE_WRITE =0x48 ; + +return 1 ; +} + +define_machine (efika) +{ + .name = EFIKA_PLATFORM_NAME, + .probe = efika_probe, + .setup_arch = efika_setup_arch, + .init = efika_init, + .show_cpuinfo = efika_show_cpuinfo, + .init_IRQ = mpc52xx_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = rtas_restart, + .power_off = rtas_power_off, + .halt = rtas_halt, + .set_rtc_time = rtas_set_rtc_time, + .get_rtc_time = rtas_get_rtc_time, + .progress = rtas_progress, + .get_boot_time = rtas_get_boot_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +};
arch/powerpc/platforms/efika/pci.c +119 -0
119 lines not on this page · raw message
arch/powerpc/platforms/efika/efika.h +19 -0
@@ -0,0 +1,19 @@ +/* +* Efika 5K2 platform setup - Header file +* +* Copyright (C) 2006 bplan GmbH +* +* This file is licensed under the terms of the GNU General Public License +* version 2. This program is licensed "as is" without any warranty of any +* kind, whether express or implied. +* +*/ + +#ifndef __ARCH_POWERPC_EFIKA__ +#define __ARCH_POWERPC_EFIKA__ + +#define EFIKA_PLATFORM_NAME "Efika" + +extern void __init efika_pcisetup (void ); + +#endif
arch/powerpc/platforms/efika/Makefile +1 -0
@@ -0,0 +1 @@ +obj-y += setup.o mpc52xx.o pci.o
arch/powerpc/platforms/Makefile +1 -0
@@ -5,6 +5,7 @@ ifeq ($(CONFIG_PPC64),y) obj-$(CONFIG_PPC_PMAC) += powermac/ endif endif +obj-$(CONFIG_PPC_EFIKA) += efika/ obj-$(CONFIG_PPC_CHRP) += chrp/ obj-$(CONFIG_4xx) += 4xx/ obj-$(CONFIG_PPC_83xx) += 83xx/
arch/powerpc/Kconfig +8 -0
@@ -386,6 +386,14 @@ config PPC_CHRP select PPC_UDBG_16550 default y +config PPC_EFIKA + bool "bPlan Efika 5k2. MPC5200B based computer" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_RTAS + select RTAS_PROC + select PPC_MPC52xx + default y + config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_MULTIPLATFORM
Quoted 1 line · On Sun, 5 Nov 2006 12:57:16 +0100 (MET) Nicolas DET <[email protected]> wrote:
Add Efika (http://www.bplan-gmbh.de/efika_spec_en.html) platform support for
arch/powerpc
Who (if anyone) is the maintainer for this sort of thing?
Thanks.
Quoted 6 lines · Andrew Morton
Quoted 1 line · On Sun, 5 Nov 2006 12:57:16 +0100 (MET) Nicolas DET <[email protected]> wrote:
Add Efika (http://www.bplan-gmbh.de/efika_spec_en.html) platform support for
arch/powerpcWho (if anyone) is the maintainer for this sort of thing?
It's powerpc, it will go through paulus tree I suppose. You can host them in -mm if you like until the merge window.
In the specific case of Efika, I'm doing the ACK'ing/NACK'ing of the patches. At this point, the platform patch and interrupt patches are good to go.
Cheers,
Ben.