write data to a file from a kernel module
Hello,
I am trying to create a module for kernel 2.4.27 that writes data to a file when it
receives a packet from the network interface card. In the code below the pkt_handler function is called each time a packet is received. A while after the insmod, the CPU reaches 100% and the pc freezes.
Is there something wrong with the code or is there an alternate way to write data to a file? I think the problem is because the opening and writing are happening too often. Don't tell me to use the proc filesystem, it is
not appropriate in my case.
Thanks in advance.
(I've commented out the semaphore operations because they don't seem to work as they are currently used)
/* Packet handler. It is called by the kernel when a new packet has been received. */
int pkt_handler (struct sk_buff *skb, struct net_device *dv, struct packet_type *pt)
{
static int calls = 0;kfree_skb (skb);
printk (KERN_ALERT "packet %d received\n", calls); if (calls++ > 10) {
open_f_and_write ("/tmp/tmp.log");
calls = 0;
}
return 0;
}
int open_f_and_write (const char *file_name)
{
struct file *file = NULL;mm_segment_t fs;
char *tmp;
struct inode *inode;
tmp = getname (file_name);
file = filp_open (tmp, O_CREAT | O_WRONLY | O_APPEND, S_IRWXU); if (IS_ERR (file)) {
int errno = PTR_ERR (file);
printk (KERN_DEBUG "error %i\n", errno);
return 2;
}
if (!file->f_op->write) {
fput (file);
return 3;
}
fs = get_fs ();set_fs (KERNEL_DS);
//inode = file->f_dentry->d_inode;
//down (&inode->i_sem);
{
char *buffer = "write something\n";
int p = file->f_op->write (file, buffer, m_strlen (buffer),&file->f_pos);
printk (KERN_ALERT "write returned %d\n", p);
}
//up(&inode->i_sem);set_fs (fs);
putname (tmp);filp_close (file, NULL);
return 0;
}
Quoted 5 lines · On Tue, 7 Nov 2006 09:52:27 -0500 "Robotis Konstantinos" <[email protected]>…
Hello,
I am trying to create a module for kernel 2.4.27 that writes data to a file when it
receives a packet from the network interface card.
http://kernelnewbies.org/FAQ/WhyWritingFilesFromKernelIsBad
Signature · 2 lines
Paolo Ornati Linux 2.6.19-rc4-gd1ed6a3e on x86_64
Quoted 5 lines
Hello,
I am trying to create a module for kernel 2.4.27 that writes data to a file when it
receives a packet from the network interface card. In the code below
What makes tcpdump and friends not usable that you need to write kernel code?
Quoted 8 lines
the
pkt_handlerfunction is called each time a packet is received. A while after the insmod, the CPU reaches 100% and the pc freezes.Is there something wrong with the code or is there an alternate way to write data to a file? I think the problem is because the opening and writing are happening too often. Don't tell me to use the proc filesystem, it is
not appropriate in my case.
If at all, you should use a character device and do the copying with copy_to_user() rather than trying to open/write files in kernelspace.
Quoted 6 lines
Thanks in advance.
(I've commented out the semaphore operations because they don't seem to work as they are currently used)
Quoted 6 lines
/* Packet handler. It is called by the kernel when a new packet has been received. */
intpkt_handler(structsk_buff*skb, structnet_device*dv, structpacket_type*pt)
{
static int calls = 0;
Your indentation is broekn, it's hard to read.
Quoted 5 lines
kfree_skb(skb);printk (
KERN_ALERT"packet %d received\n", calls); if (calls++ > 10) {open_f_and_write("/tmp/tmp.log");
You repeatedly open and write. That's a CPU buster for sure. How about opening it once? (Of course that leaves the question where to close it - which is why you should use alternate methods such as char devs, (proc) or SOCK_RAW)
open_f_and_write()s return value is not examined. In case you run into a problem, you will continue to do so -- not so good, better stop when there is a problem.
Quoted 14 lines
calls = 0;
}return 0;
}int
open_f_and_write(const char*file_name)
{
struct file *file = NULL;mm_segment_tfs;
char *tmp;
struct inode *inode;
Quoted 4 lines
tmp = getname (
file_name);file =
filp_open(tmp,O_CREAT|O_WRONLY|O_APPEND,S_IRWXU); if (IS_ERR(file)) {
tmp is not freed. So it's more than just logical for the box to lockup someday.
Quoted 3 lines
int errno =
PTR_ERR(file);
printk (KERN_DEBUG"error %i\n", errno);
return 2;
You usually would return -PTR_ERR(file) here;
Quoted 3 lines
}
if (!file->f_op->write) {
fput (file);
tmp is not freed here either.
Quoted 11 lines
return 3;
}fs =
get_fs();set_fs(KERNEL_DS);
//inode =file->f_dentry->d_inode;
//down (&inode->i_sem);{
char *buffer = "write something\n";
int p =file->f_op->write(file, buffer,m_strlen(buffer),
strlen(buffer) is probably better, whatever m_strlen() is.
Quoted 8 lines
&file->f_pos);
printk (KERN_ALERT"write returned %d\n", p);
}
//up(&inode->i_sem);set_fs(fs);
putname (tmp);filp_close(file, NULL);
Quoted 9 lines
return 0;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
-`J'