Skip to contentSkip to conversation

Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags in omap.c

PATCH Carlos Aguiar 2 participants 2 messages Nov 6, 2006 – Nov 10, 2006 MMC, SD and SDIO

lore
Share & tools
lore
#0 lore raw

Hi Tony and folks,

Following previous comments from Juha and Pierre, this patch add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags in omap.c

BR,

Carlos.

Signature · 6 lines
Carlos Eduardo
Nokia Institute of Technology - INdT
Embedded Linux Laboratory - 10LE
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: [email protected]

Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags

Signed-off-by Carlos Eduardo Aguiar <carlos.aguiar <at> indt.org.br>
drivers/mmc/omap.c +2 -2
Index: linux-omap-git/drivers/mmc/omap.c
===================================================================
@@ -1088,8 +1088,8 @@ static int __init mmc_omap_probe(struct 
 	mmc->ops = &mmc_omap_ops;
 	mmc->f_min = 400000;
 	mmc->f_max = 24000000;
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_CAP_MULTIWRITE
-				| MMC_CAP_BYTEBLOCK;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
 
 	if (minfo->wire4)
 		 mmc->caps |= MMC_CAP_4_BIT_DATA;
#1 lore raw
Quoted 27 lines · Carlos Aguiar

Hi Tony and folks,

Following previous comments from Juha and Pierre, this patch add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags in omap.c

BR,

Carlos.

Signature · 14 lines
Carlos Eduardo
Nokia Institute of Technology - INdT
Embedded Linux Laboratory - 10LE
Phone: +55 92 2126-1079
Mobile: +55 92 8127-1797
E-mail: [email protected]


Add MMC_CAP_{MULTIWRITE,BYTEBLOCK} flags

Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar <at> indt.org.br>

Index: linux-omap-git/drivers/mmc/omap.c
===================================================================

drivers/mmc/omap.c static int __init mmc_omap_probe(struct · line 1095

Quoted 10 lines
drivers/mmc/omap.c +2 -2
@@ -1088,8 +1088,8 @@ static int __init mmc_omap_probe(struct 
 	mmc->ops = &mmc_omap_ops;
 	mmc->f_min = 400000;
 	mmc->f_max = 24000000;
-	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_CAP_MULTIWRITE
-				| MMC_CAP_BYTEBLOCK;
+	mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+	mmc->caps = MMC_CAP_MULTIWRITE | MMC_CAP_BYTEBLOCK;
 
 	if (minfo->wire4)
 		 mmc->caps |= MMC_CAP_4_BIT_DATA;

Pushing today.

Tony