Skip to contentSkip to conversation

ieee80211 & ipw2200 (ipw2100) issues

DISCUSSION Shawn Starr 3 participants 3 messages Nov 12, 2006 – Nov 13, 2006

lore
Share & tools
lore
#0 lore raw

I would like to know when the Intel people working on the ipw2200 will merge 1.2.0 into vanilla? If it's not in vanilla is this present in akpm's -mm tree?

The version in vanilla right now doesn't work with WPA and doesn't work with the newst firmware.

Are there plans to change the ipw cards to use the new softmac subsystem?

Thanks,
Shawn.

#1 lore raw
Quoted 6 lines · Shawn Starr

I would like to know when the Intel people working on the ipw2200 will merge 1.2.0 into vanilla? If it's not in vanilla is this present in akpm's -mm tree?

The version in vanilla right now doesn't work with WPA and doesn't work with the newst firmware.

I'm writing this email on a VPN link over a WPA-enabled connection on my ipw2200 wifi card, FC6-uptodate with 2.6.19-rc5-git2:

[asuardi@sandman ~]$ dmesg | grep -i ipw
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.4kmpr
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: Detected geography ZZD (13 802.11bg channels, 0 802.11a channels) [asuardi@sandman ~]$ ps ax| grep wpa
2852 ? Ss 0:00 wpa_supplicant -B -Dwext -ieth1 -c
/etc/wpa_supplicant/wpa_supplicant.conf
4816 pts/2 S+ 0:00 grep wpa
[asuardi@sandman ~]$ rpm -q wpa_supplicant wpa_supplicant-0.4.9-1.fc6
[asuardi@sandman ~]$ uname -a
Linux sandman 2.6.19-rc5-git2 #2 Thu Nov 9 20:05:41 CET 2006 i686 i686 i386 GNU/Linux

What combo isn't working for you ?

Quoted 1 line

Are there plans to change the ipw cards to use the new softmac subsystem?

--alessandro

"...when I get it, I _get_ it"

(Lara Eidemiller)

#2 lore raw

There seem to be many implementations of WPA, including:

tkip+tkip
tkip+ccmp
ccmp+ccmp
ccmp+tkip

Perhaps only some modes are working, and some are not? The "wpa_cli" utility will show which combo is in use (the "status" subcommand), and will also show what is happening if you run it while wpa_supplicant is trying to connect.

My own ipw2200 here, on 2.6.18, seems to work with all of the WPA/WPA2 combinations that my two APs have tried, including three of the above four scenarios.

But I have updated to v0.5.5 of the wpa_supplicant daemon for this, and maybe that's the problem here -- daemon too old/buggy?

Cheers