Skip to contentSkip to conversation

storing hush scripts

U-Boot-Users cam at sysgo.com 6 participants 10 messages Nov 14, 2006 – Nov 17, 2006

lore
Share & tools
lore
#0 lore raw

Hello,

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it works?

regards,

Carlos Mitidieri

#1 lore raw
Quoted 3 lines

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it

works?

Infact, use (abuse) of environment variables to store the scripts is strongly discouraged. Yes, you can download the script at run time using UART/TFTP. The script needs a valid header to work, for details see the 'mkimage' utility present in the 'tools' directory. You will have to add header to the script using this utility and then download it. Also, refer to the details of 'autoscr' command.

--
Ajay

#2 lore raw
Quoted 3 lines · In message <040401c707e4$90921860$561fa8c0@pcajain> you wrote:

Infact, use (abuse) of environment variables to store the scripts is strongly discouraged.

Who says so? I strongly disagree.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The day-to-day travails of the IBM programmer are so amusing to  most
of us who are fortunate enough never to have been one - like watching
Charlie Chaplin trying to cook a shoe.
#3 lore raw
Quoted 5 lines
Quoted 3 lines

Infact, use (abuse) of environment variables to store the scripts is strongly discouraged.

Who says so? I strongly disagree.

Refering to the text below:

CONFIG_EXTRA_ENV_SETTINGS: Define this to contain any number of null terminated strings (variable = value pairs) that will be part of the default environment compiled into the boot image. Warning: This method is based on knowledge about the internal format how the environment is stored by the U-Boot code. This is NOT an official, exported interface! Although it is unlikely that this format will change soon, there is no guarantee either. You better know what you are doing here. Note:
overly (ab)use of the default environment is discouraged. Make sure to check other ways to preset the environment like the autoscript function or the boot command first.

Therfore, can we not interptet that use (abuse) is discouraged?

--
Ajay

#4 lore raw
Quoted 10 lines · On Wed, 15 Nov 2006 12:07:27 +0530 "Ajay Jain" <[email protected]> wrote:
Quoted 5 lines
Quoted 3 lines

Infact, use (abuse) of environment variables to store the scripts is strongly discouraged.

Who says so? I strongly disagree.

Refering to the text below:

here. Note: overly (ab)use of the default environment is discouraged. Make sure to check other ways to preset the environment

The key word here is ....... ^default^.
The comment is for the specific C macro to setup the default env in the compiled image. I used it to create some standard scripts for a standard devel setup on many boards at once.

To create and run "saveenv" to store any scripts you want on a specific board is just fine.

#5 lore raw
In reply to Ajay Jain
Quoted 4 lines · In message <04fe01c70880$88987f40$561fa8c0@pcajain> you wrote:

Refering to the text below:

CONFIG_EXTRA_ENV_SETTINGS: Define this to contain any number of null

...

Quoted 2 lines

guarantee either. You better know what you are doing here. Note:
overly (ab)use of the default environment is discouraged. Make sure to

                        ^^^^^^^
Quoted 4 lines

check other ways to preset the environment like the autoscript function or the boot command first.

Therfore, can we not interptet that use (abuse) is discouraged?

The text only warns not to overload trhe DEFAULT environment.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Boykottiert Microsoft - Kauft Eure Fenster bei OBI!
#6 lore raw
In reply to cam at sysgo.com

Hello!

Quoted 2 lines · cam at sysgo.com

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it works?

mkimage (on development host) and autoscr (on U-Boot target) are your friendd.

With best regards
Andreas Schweigstill

Signature · 5 lines
Dipl.-Phys. Andreas Schweigstill
Schweigstill IT | Embedded Systems
Schauenburgerstra?e 116, D-24118 Kiel, Germany
Phone: (+49) 431 5606-435, Fax: (+49) 431 5606-436
Mobile: (+49) 171 6921973, Web: http://www.schweigstill.de/
#7 lore raw

Many thanks to Ajay Jain and Andreas Schweigstill for the very quick anwser. Best regards,

Carlos Mitidieri

Quoted 5 lines

Hello!

Quoted 2 lines · cam at sysgo.com

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it works?

#8 lore raw
In reply to cam at sysgo.com
Quoted 4 lines · cam at sysgo.com

Hello,

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it works?

Take a look at autoscr command. You can execute scripts stored in flash in U-Image format.

Best regards,
Tolunay

#9 lore raw
In reply to cam at sysgo.com
Quoted 3 lines · In message <[email protected]> you wrote:

Is there an alternative to store hush scripts, other than in an environment variable? Could you please give details on how it works?

Use a script image. Please RTFM.

Best regards,

Wolfgang Denk

Signature · 6 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
All repairs tend to destroy the structure, to  increase  the  entropy
and  disorder  of the system. Less and less effort is spent on fixing
original design flaws; more and more is spent on fixing flaws  intro-
duced by earlier fixes.       - Fred Brooks, "The Mythical Man Month"