x86_64: Relocatable bzImage (V3)
cover x86_64: Relocatable bzImage (V3)
Hi All,
Here is the third attempt on implementing relocatable bzImage for x86_64.
Following are the changes since V2.
- Broke suspend/resume code changes into smaller patches. Pavel, I hope now it is easier to review.
- Moved cpu long mode and SSE verfication code into a single common file (arch/x86_64/kernel/verify_cpu.S). This file is not shared at all the entry places.
- Fixed a bug during resume operation on machines which support NX bit.
Your comments/suggestions are welcome.
Thanks
Vivek
PATCH 1/20 x86_64: Align data segment to PAGE_SIZE boundary
o Explicitly align data segment to PAGE_SIZE boundary otherwise depending on config options and tool chain it might be placed on a non PAGE_SIZE aligned boundary and vmlinux loaders like kexec fail when they encounter a PT_LOAD type segment which is not aligned to PAGE_SIZE boundary.
---
arch/x86_64/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+)
arch/x86_64/kernel/vmlinux.lds.S renamed from arch/x86_64/kernel/vmlinux.lds.S~x86_64-align-data-segment-to-4K-boundary +1 -0
@@ -60,6 +60,7 @@ SECTIONS } #endif + . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { *(.data)
_
PATCH 2/20 x86_64: Assembly safe page.h and pgtable.h
In reply to Vivek GoyalThis patch makes pgtable.h and page.h safe to include in assembly files like head.S. Allowing us to use symbolic constants instead of hard coded numbers when refering to the page tables.
This patch copies asm-sparc64/const.h to asm-x86_64 to get a definition of _AC() a very convinient macro that allows us to force the type when we are compiling the code in C and to drop all of the type information when we are using the constant in assembly. Previously this was done with multiple definition of the same constant. const.h was modified slightly so that it works when given CONFIG options as arguments.
This patch adds #ifndef __ASSEMBLY__ ... #endif and _AC(1,UL) where appropriate so the assembler won't choke on the header files. Otherwise nothing should have changed.
---
include/asm-x86_64/const.h | 20 ++++++++++++++++++++ include/asm-x86_64/page.h | 34 +++++++++++++--------------------- include/asm-x86_64/pgtable.h | 33 +++++++++++++++++++++------------ 3 files changed, 54 insertions(+), 33 deletions(-)
include/asm-x86_64/const.h new file +20 -0
@@ -0,0 +1,20 @@ +/* const.h: Macros for dealing with constants. */ + +#ifndef _X86_64_CONST_H +#define _X86_64_CONST_H + +/* Some constant macros are used in both assembler and +* C code. Therefore we cannot annotate them always with +* 'UL' and other type specificers unilaterally. We +* use the following macros to deal with this. +*/ + +#ifdef __ASSEMBLY__ +#define _AC (X ,Y ) X +#else +#define __AC (X ,Y ) (X##Y) +#define _AC (X ,Y ) __AC(X,Y) +#endif + + +#endif /* !(_X86_64_CONST_H) */
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Assembly-safe-page.h-and-pgtable.h +13 -21
@@ -1,14 +1,11 @@#ifndef _X86_64_PAGE_H#define _X86_64_PAGE_H +#include <asm/const.h> /* PAGE_SHIFT determines the page size */ #define PAGE_SHIFT 12 -#ifdef __ASSEMBLY__ -#define PAGE_SIZE (0x1 << PAGE_SHIFT) -#else -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#endif +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)#define PAGE_MASK (~(PAGE_SIZE-1))#define PHYSICAL_PAGE_MASK (~(PAGE_SIZE-1) & __PHYSICAL_MASK)
@@ -33,10 +30,10 @@#define N_EXCEPTION_STACKS 5/* hw limit: 7 */ #define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1)) -#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT) +#define LARGE_PAGE_SIZE (_AC(1,UL) << PMD_SHIFT)#define HPAGE_SHIFT PMD_SHIFT -#define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) +#define HPAGE_SIZE (_AC(1,UL) << HPAGE_SHIFT)#define HPAGE_MASK (~(HPAGE_SIZE - 1))#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
@@ -76,29 +73,24 @@ typedef struct { unsigned long pgprot; }#define __pgd (x) ((pgd_t) { (x) } )#define __pgprot (x) ((pgprot_t) { (x) } ) -#define __PHYSICAL_START ((unsigned long)CONFIG_PHYSICAL_START) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) -#define __START_KERNEL_map 0xffffffff80000000UL -#define __PAGE_OFFSET 0xffff810000000000UL +#endif /* !__ASSEMBLY__ */ -#else -#define __PHYSICAL_START CONFIG_PHYSICAL_START +#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL)#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) -#define __START_KERNEL_map 0xffffffff80000000 -#define __PAGE_OFFSET 0xffff810000000000 -#endif /* !__ASSEMBLY__ */ +#define __START_KERNEL_map _AC(0xffffffff80000000,UL) +#define __PAGE_OFFSET _AC(0xffff810000000000,UL)/* to align the pointer to the (next) page boundary */ #define PAGE_ALIGN (addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)/* See Documentation/x86_64/mm.txt for a description of the memory map. */ #define __PHYSICAL_MASK_SHIFT 46 -#define __PHYSICAL_MASK ((1UL << __PHYSICAL_MASK_SHIFT) - 1) +#define __PHYSICAL_MASK ((_AC(1,UL) << __PHYSICAL_MASK_SHIFT) - 1)#define __VIRTUAL_MASK_SHIFT 48 -#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1) +#define __VIRTUAL_MASK ((_AC(1,UL) << __VIRTUAL_MASK_SHIFT) - 1) -#define KERNEL_TEXT_SIZE (40UL*1024*1024) -#define KERNEL_TEXT_START 0xffffffff80000000UL +#define KERNEL_TEXT_SIZE (_AC(40,UL)*1024*1024) +#define KERNEL_TEXT_START _AC(0xffffffff80000000,UL)#ifndef __ASSEMBLY__
@@ -106,7 +98,7 @@ typedef struct { unsigned long pgprot; }#endif /* __ASSEMBLY__ */ -#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET) +#define PAGE_OFFSET __PAGE_OFFSET/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol. Otherwise you risk miscompilation. */
include/asm-x86_64/pgtable.h renamed from include/asm-x86_64/pgtable.h~x86_64-Assembly-safe-page.h-and-pgtable.h +21 -12
@@ -1,6 +1,9 @@#ifndef _X86_64_PGTABLE_H#define _X86_64_PGTABLE_H +#include <asm/const.h> +#ifndef __ASSEMBLY__ +/* * This file contains the functions and defines necessary to modify and use * the x86-64 page table tree.
@@ -31,6 +34,8 @@ extern void clear_kernel_mapping(unsigneextern unsigned long empty_zero_page[PAGE_SIZE /sizeof (unsigned long )];#define ZERO_PAGE (vaddr) (virt_to_page(empty_zero_page)) +#endif /* !__ASSEMBLY__ */ +/* * PGDIR_SHIFT determines what a top-level page table entry can map */
@@ -55,6 +60,8 @@ extern unsigned long empty_zero_page[PAG*/ #define PTRS_PER_PTE 512 +#ifndef __ASSEMBLY__ +#define pte_ERROR (e) \ printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), pte_val(e))#define pmd_ERROR (e) \
@@ -118,22 +125,23 @@ static inline pte_t ptep_get_and_clear_f#define pte_pgprot (a) (__pgprot((a).pte & ~PHYSICAL_PAGE_MASK)) -#define PMD_SIZE (1UL << PMD_SHIFT) +#endif /* !__ASSEMBLY__ */ + +#define PMD_SIZE (_AC(1,UL) << PMD_SHIFT)#define PMD_MASK (~(PMD_SIZE-1)) -#define PUD_SIZE (1UL << PUD_SHIFT) +#define PUD_SIZE (_AC(1,UL) << PUD_SHIFT)#define PUD_MASK (~(PUD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_SIZE (_AC(1,UL) << PGDIR_SHIFT)#define PGDIR_MASK (~(PGDIR_SIZE-1))#define USER_PTRS_PER_PGD ((TASK_SIZE-1)/PGDIR_SIZE+1)#define FIRST_USER_ADDRESS 0 -#ifndef __ASSEMBLY__ -#define MAXMEM 0x3fffffffffffUL -#define VMALLOC_START 0xffffc20000000000UL -#define VMALLOC_END 0xffffe1ffffffffffUL -#define MODULES_VADDR 0xffffffff88000000UL -#define MODULES_END 0xfffffffffff00000UL +#define MAXMEM _AC(0x3fffffffffff,UL) +#define VMALLOC_START _AC(0xffffc20000000000,UL) +#define VMALLOC_END _AC(0xffffe1ffffffffff,UL) +#define MODULES_VADDR _AC(0xffffffff88000000,UL) +#define MODULES_END _AC(0xfffffffffff00000,UL)#define MODULES_LEN (MODULES_END - MODULES_VADDR)#define _PAGE_BIT_PRESENT 0
@@ -159,7 +167,7 @@ static inline pte_t ptep_get_and_clear_f#define _PAGE_GLOBAL 0x100/* Global TLB entry */ #define _PAGE_PROTNONE 0x080/* If not present */ -#define _PAGE_NX (1UL<<_PAGE_BIT_NX) +#define _PAGE_NX (_AC(1,UL)<<_PAGE_BIT_NX)#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
@@ -221,6 +229,8 @@ static inline pte_t ptep_get_and_clear_f#define __S110 PAGE_SHARED_EXEC#define __S111 PAGE_SHARED_EXEC +#ifndef __ASSEMBLY__ +static inline unsigned long pgd_bad (pgd_t pgd) {unsigned long val =pgd_val (pgd);
@@ -417,8 +427,6 @@ extern spinlock_t pgd_lock;extern struct page *pgd_list;void vmalloc_sync_all (void ); -#endif /* !__ASSEMBLY__ */ -extern int kern_addr_valid (unsigned long addr);#define io_remap_pfn_range (vma, vaddr, pfn, size, prot) \
@@ -448,5 +456,6 @@ extern int kern_addr_valid(unsigned long#define __HAVE_ARCH_PTEP_SET_WRPROTECT#define __HAVE_ARCH_PTE_SAME#include <asm-generic/pgtable.h> +#endif /* !__ASSEMBLY__ */ #endif /* _X86_64_PGTABLE_H */
_
Re: [PATCH 2/20] x86_64: Assembly safe page.h and pgtable.h
Quoted 5 lines · Vivek Goyal
This patch makes
pgtable.handpage.hsafe to include in assembly files likehead.S. Allowing us to use symbolic constants instead of hard coded numbers when refering to the page tables.
I still think that macro is horrible ugly and the use of that macro should be minimized as suggested earlier.
-Andi
Re: [PATCH 2/20] x86_64: Assembly safe page.h and pgtable.h
Quoted 10 lines · Andi Kleen
Quoted 5 lines · Vivek Goyal
This patch makes
pgtable.handpage.hsafe to include in assembly files likehead.S. Allowing us to use symbolic constants instead of hard coded numbers when refering to the page tables.I still think that macro is horrible ugly and the use of that macro should be minimized as suggested earlier.
Hi Andi,
Personally I think maintenance is easier if we don't try to discriminate between the constants which require that macro and which don't require.
But if you don't like it, then its ok, I will only apply it to places where it is really required and breaks the things (like shift operations).
Will do that change in next posting.
Thanks
Vivek
PATCH 3/20 x86_64: Kill temp_boot_pmds
In reply to Vivek GoyalEarly in the boot process we need the ability to set up temporary mappings, before our normal mechanisms are initialized. Currently this is used to map pages that are part of the page tables we are building and pages during the dmi scan.
The core problem is that we are using the user portion of the page tables to implement this. Which means that while this mechanism is active we cannot catch NULL pointer dereferences and we deviate from the normal ways of handling things.
In this patch I modify early_ioremap to map pages into the kernel portion of address space, roughly where we will later put modules, and I make the discovery of which addresses we can use dynamic which removes all kinds of static limits and remove the dependencies on implementation details between different parts of the code.
Now alloc_low_page() and unmap_low_page() use early_iomap() and early_iounmap() to allocate/map and unmap a page.
---
arch/x86_64/kernel/head.S | 3 - arch/x86_64/mm/init.c | 100 ++++++++++++++++++++-------------------------- 2 files changed, 45 insertions(+), 58 deletions(-)
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-Kill-temp_boot_pmds +0 -3
@@ -280,9 +280,6 @@ NEXT_PAGE(level2_ident_pgt) .quad i << 21 | 0x083 i = i + 1 .endr - /* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */ - .globl temp_boot_pmds -temp_boot_pmds: .fill 492,8,0 NEXT_PAGE(level2_kernel_pgt)
arch/x86_64/mm/init.c renamed from arch/x86_64/mm/init.c~x86_64-Kill-temp_boot_pmds +45 -55
165 lines not on this page · raw message
_
PATCH 4/20 x86_64: Cleanup the early boot page table
In reply to Vivek Goyal- Merge physmem_pgt and ident_pgt, removing physmem_pgt. The merge is broken as soon as mm/init.c:init_memory_mapping is run.
- As physmem_pgt is gone don't export it in pgtable.h.
- Use defines from pgtable.h for page permissions.
- Fix the physical memory identity mapping so it is at the correct address.
- Remove the physical memory mapping from wakeup_level4_pgt it is at the wrong address so we can't possibly be usinging it.
- Simply NEXT_PAGE the work to calculate the phys_ alias of the labels was very cool. Unfortuantely it was a brittle special purpose hack that makes maitenance more difficult. Instead just use label - __START_KERNEL_map like we do everywhere else in assembly.
---
arch/x86_64/kernel/head.S | 61 +++++++++++++++++++------------------------ include/asm-x86_64/pgtable.h | 1 2 files changed, 28 insertions(+), 34 deletions(-)
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-Cleanup-the-early-boot-page-table +28 -33
@@ -13,6 +13,7 @@ #include <linux/init.h> #include <asm/desc.h> #include <asm/segment.h> +#include <asm/pgtable.h> #include <asm/page.h> #include <asm/msr.h> #include <asm/cache.h>
@@ -252,52 +253,48 @@ ljumpvector: ENTRY(stext) ENTRY(_stext) - $page = 0 #define NEXT_PAGE(name) \ - $page = $page + 1; \ - .org $page * 0x1000; \ - phys_/**/name = $page * 0x1000 + __PHYSICAL_START; \ + .balign PAGE_SIZE; \ ENTRY(name) +/* Automate the creation of 1 to 1 mapping pmd entries */ +#define PMDS(START, PERM, COUNT) \ + i = 0 ; \ + .rept (COUNT) ; \ + .quad (START) + (i << 21) + (PERM) ; \ + i = i + 1 ; \ + .endr + NEXT_PAGE(init_level4_pgt) /* This gets initialized in x86_64_start_kernel */ .fill 512,8,0 NEXT_PAGE(level3_ident_pgt) - .quad phys_level2_ident_pgt | 0x007 + .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE .fill 511,8,0 NEXT_PAGE(level3_kernel_pgt) .fill 510,8,0 /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ - .quad phys_level2_kernel_pgt | 0x007 + .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE .fill 1,8,0 NEXT_PAGE(level2_ident_pgt) - /* 40MB for bootup. */ - i = 0 - .rept 20 - .quad i << 21 | 0x083 - i = i + 1 - .endr - .fill 492,8,0 + /* Since I easily can, map the first 1G. + * Don't set NX because code runs from these pages. + */ + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC, PTRS_PER_PMD) NEXT_PAGE(level2_kernel_pgt) /* 40MB kernel mapping. The kernel code cannot be bigger than that. When you change this change KERNEL_TEXT_SIZE in page.h too. */ /* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */ - i = 0 - .rept 20 - .quad i << 21 | 0x183 - i = i + 1 - .endr + PMDS(0x0000000000000000, __PAGE_KERNEL_LARGE_EXEC|_PAGE_GLOBAL, + KERNEL_TEXT_SIZE/PMD_SIZE) /* Module mapping starts here */ - .fill 492,8,0 - -NEXT_PAGE(level3_physmem_pgt) - .quad phys_level2_kernel_pgt | 0x007 /* so that __va works even before pagetable_init */ - .fill 511,8,0 + .fill (PTRS_PER_PMD - (KERNEL_TEXT_SIZE/PMD_SIZE)),8,0 +#undef PMDS #undef NEXT_PAGE .data
@@ -305,12 +302,10 @@ NEXT_PAGE(level3_physmem_pgt) #ifdef CONFIG_ACPI_SLEEP .align PAGE_SIZE ENTRY(wakeup_level4_pgt) - .quad phys_level3_ident_pgt | 0x007 - .fill 255,8,0 - .quad phys_level3_physmem_pgt | 0x007 - .fill 254,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 510,8,0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad phys_level3_kernel_pgt | 0x007 + .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE #endif #ifndef CONFIG_HOTPLUG_CPU
@@ -324,12 +319,12 @@ ENTRY(wakeup_level4_pgt) */ .align PAGE_SIZE ENTRY(boot_level4_pgt) - .quad phys_level3_ident_pgt | 0x007 - .fill 255,8,0 - .quad phys_level3_physmem_pgt | 0x007 - .fill 254,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 257,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 252,8,0 /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad phys_level3_kernel_pgt | 0x007 + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE .data
include/asm-x86_64/pgtable.h renamed from include/asm-x86_64/pgtable.h~x86_64-Cleanup-the-early-boot-page-table +0 -1
@@ -15,7 +15,6 @@#include <asm/pda.h> extern pud_t level3_kernel_pgt[512 ]; -extern pud_t level3_physmem_pgt[512 ];extern pud_t level3_ident_pgt[512 ];extern pmd_t level2_kernel_pgt[512 ];extern pgd_t init_level4_pgt[];
_
PATCH 5/20 x86_64: Fix early printk to use standard ISA mapping
In reply to Vivek Goyal---
arch/x86_64/kernel/early_printk.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/x86_64/kernel/early_printk.c renamed from arch/x86_64/kernel/early_printk.c~x86_64-fix-early_printk-to-use-the-standard-ISA-mapping +1 -2
@@ -11,11 +11,10 @@#ifdef __i386__#include <asm/setup.h> -#define VGABASE (__ISA_IO_base + 0xb8000)#else #include <asm/bootsetup.h> -#define VGABASE ((void __iomem *)0xffffffff800b8000UL)#endif +#define VGABASE (__ISA_IO_base + 0xb8000)static int max_ypos =25 , max_xpos =80 ;static int current_ypos =25 , current_xpos =0 ;
_
PATCH 6/20 x86_64: Modify copy bootdata to use virtual addresses
In reply to Vivek GoyalUse virtual addresses instead of physical addresses in copy bootdata. In addition fix the implementation of the old bootloader convention. Everything is at real_mode_data always. It is just that sometimes real_mode_data was relocated by setup.S to not sit at 0x90000.
---
arch/x86_64/kernel/head64.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-)
arch/x86_64/kernel/head64.c renamed from arch/x86_64/kernel/head64.c~x86_64-modify-copy_bootdata-to-use-virtual-addresses +8 -9
@@ -29,27 +29,26 @@ static void __init clear_bss(void) }#define NEW_CL_POINTER 0x228/* Relative to real mode data */ -#define OLD_CL_MAGIC_ADDR 0x90020 +#define OLD_CL_MAGIC_ADDR 0x20#define OLD_CL_MAGIC 0xA33F -#define OLD_CL_BASE_ADDR 0x90000 -#define OLD_CL_OFFSET 0x90022 +#define OLD_CL_OFFSET 0x22extern char saved_command_line[];static void __init copy_bootdata (char *real_mode_data) { -int new_data; +unsigned long new_data;char * command_line;memcpy (x86_boot_params, real_mode_data,BOOT_PARAM_SIZE ); - new_data = *(int *) (x86_boot_params +NEW_CL_POINTER ); + new_data = *(u32 *) (x86_boot_params +NEW_CL_POINTER );if (!new_data) { -if (OLD_CL_MAGIC != * (u16 *)OLD_CL_MAGIC_ADDR ) { +if (OLD_CL_MAGIC != *(u16 *)(real_mode_data +OLD_CL_MAGIC_ADDR )) {return ; } - new_data =OLD_CL_BASE_ADDR + * (u16 *)OLD_CL_OFFSET ; + new_data =__pa (real_mode_data) + *(u16 *)(real_mode_data +OLD_CL_OFFSET ); } - command_line = (char *) ((u64)(new_data)); + command_line =__va (new_data);memcpy (saved_command_line, command_line,COMMAND_LINE_SIZE ); }
@@ -74,7 +73,7 @@ void __init x86_64_start_kernel(char * rcpu_pda (i) = &boot_cpu_pda[i];pda_init (0 ); -copy_bootdata (real_mode_data); +copy_bootdata (__va (real_mode_data));#ifdef CONFIG_SMP cpu_set (0 , cpu_online_map);#endif
_
PATCH 7/20 x86_64: cleanup segments
In reply to Vivek GoyalMove __KERNEL32_CS up into the unused gdt entry. __KERNEL32_CS is used when entering the kernel so putting it first is useful when trying to keep boot gdt sizes to a minimum.
Set the accessed bit on all gdt entries. We don't care so there is no need for the cpu to burn the extra cycles, and it potentially allows the pages to be immutable. Plus it is confusing when debugging and your gdt entries mysteriously change.
---
arch/x86_64/kernel/head.S | 12 ++++++------ include/asm-x86_64/segment.h | 2 +- 2 files changed, 7 insertions(+), 7 deletions(-)
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-cleanup-segments +6 -6
@@ -354,13 +354,13 @@ gdt: ENTRY(cpu_gdt_table) .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00cf9b000000ffff /* __KERNEL32_CS */ + .quad 0x00af9b000000ffff /* __KERNEL_CS */ + .quad 0x00cf93000000ffff /* __KERNEL_DS */ + .quad 0x00cffb000000ffff /* __USER32_CS */ + .quad 0x00cff3000000ffff /* __USER_DS, __USER32_DS */ + .quad 0x00affb000000ffff /* __USER_CS */ .quad 0x0 /* unused */ - .quad 0x00af9a000000ffff /* __KERNEL_CS */ - .quad 0x00cf92000000ffff /* __KERNEL_DS */ - .quad 0x00cffa000000ffff /* __USER32_CS */ - .quad 0x00cff2000000ffff /* __USER_DS, __USER32_DS */ - .quad 0x00affa000000ffff /* __USER_CS */ - .quad 0x00cf9a000000ffff /* __KERNEL32_CS */ .quad 0,0 /* TSS */ .quad 0,0 /* LDT */ .quad 0,0,0 /* three TLS descriptors */
include/asm-x86_64/segment.h renamed from include/asm-x86_64/segment.h~x86_64-cleanup-segments +1 -1
@@ -6,7 +6,7 @@#define __KERNEL_CS 0x10#define __KERNEL_DS 0x18 -#define __KERNEL32_CS 0x38 +#define __KERNEL32_CS 0x08/* * we cannot use the same code segment descriptor for user and kernel
_
PATCH 8/20 x86_64: Add EFER to the set registers saved by save_processor_state
In reply to Vivek GoyalEFER varies like %cr4 depending on the cpu capabilities, and which cpu capabilities we want to make use of. So save/restore it make certain we have the same EFER value when we are done.
---
arch/x86_64/kernel/suspend.c | 3 ++- include/asm-x86_64/suspend.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-)
arch/x86_64/kernel/suspend.c renamed from arch/x86_64/kernel/suspend.c~x86_64-Add-EFER-to-the-set-registers-saved-by-save_processor_state +2 -1
@@ -33,7 +33,6 @@ void __save_processor_state(struct saved asmvolatile ("str %0" :"=m" (ctxt->tr));/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ -/* EFER should be constant for kernel version, no need to handle it. */ /* * segment registers */
@@ -50,6 +49,7 @@ void __save_processor_state(struct saved/* * control registers */ +rdmsrl (MSR_EFER , ctxt->efer); asmvolatile ("movq %%cr0, %0" :"=r" (ctxt->cr0)); asmvolatile ("movq %%cr2, %0" :"=r" (ctxt->cr2)); asmvolatile ("movq %%cr3, %0" :"=r" (ctxt->cr3));
@@ -75,6 +75,7 @@ void __restore_processor_state(struct sa/* * control registers */ +wrmsrl (MSR_EFER , ctxt->efer); asmvolatile ("movq %0, %%cr8" ::"r" (ctxt->cr8)); asmvolatile ("movq %0, %%cr4" ::"r" (ctxt->cr4)); asmvolatile ("movq %0, %%cr3" ::"r" (ctxt->cr3));
include/asm-x86_64/suspend.h renamed from include/asm-x86_64/suspend.h~x86_64-Add-EFER-to-the-set-registers-saved-by-save_processor_state +1 -0
@@ -17,6 +17,7 @@ struct saved_context {u16 ds, es, fs, gs, ss;unsigned long gs_base, gs_kernel_base, fs_base;unsigned long cr0, cr2, cr3, cr4, cr8; +unsigned long efer;u16 gdt_pad;u16 gdt_limit;unsigned long gdt_base;
_
Re: [PATCH 8/20] x86_64: Add EFER to the set registers saved by save_processor_state
Hi!
Quoted 3 lines
EFER varies like %cr4 depending on the cpu capabilities, and which cpu capabilities we want to make use of. So save/restore it make certain we have the same EFER value when we are done.
I still think that comment is right: EFER is function(cpu capabilities, kernel version, kernel cmdline); and that _should_ be constant accross suspend.
Anyway saving it does not hurt and code is probably easier to understand.
ACK.
Pavel
Quoted 31 lines
arch/x86_64/kernel/suspend.c renamed from arch/x86_64/kernel/suspend.c~x86_64-Add-EFER-to-the-set-registers-saved-by-save_processor_state +3
-2/* XMM0..XMM15 should be handled by kernel_fpu_begin(). */ -/* EFER should be constant for kernel version, no need to handle it. */ /* * segment registers */ @@ -50,6 +49,7 @@ void __save_processor_state(struct saved/* * control registers */ +rdmsrl (MSR_EFER , ctxt->efer); asmvolatile ("movq %%cr0, %0" :"=r" (ctxt->cr0)); asmvolatile ("movq %%cr2, %0" :"=r" (ctxt->cr2)); asmvolatile ("movq %%cr3, %0" :"=r" (ctxt->cr3));@@ -75,6 +75,7 @@ void __restore_processor_state(struct sa/* * control registers */ +wrmsrl (MSR_EFER , ctxt->efer); asmvolatile ("movq %0, %%cr8" ::"r" (ctxt->cr8)); asmvolatile ("movq %0, %%cr4" ::"r" (ctxt->cr4)); asmvolatile ("movq %0, %%cr3" ::"r" (ctxt->cr3)); --- linux-2.6.19-rc6-reloc/include/asm-x86_64/suspend.h~x86_64-Add-EFER-to-the-set-registers-saved-by-save_processor_state 2006-11-17 00:08:16.000000000 -0500@@ -17,6 +17,7 @@ struct saved_context {u16 ds, es, fs, gs, ss;unsigned long gs_base, gs_kernel_base, fs_base;unsigned long cr0, cr2, cr3, cr4, cr8; +unsigned long efer;u16 gdt_pad;u16 gdt_limit;unsigned long gdt_base;_
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 9/20 x86_64: 64bit PIC SMP trampoline
In reply to Vivek GoyalThis modifies the SMP trampoline and all of the associated code so it can jump to a 64bit kernel loaded at an arbitrary address.
The dependencies on having an idenetity mapped page in the kernel page tables for SMP bootup have all been removed.
In addition the trampoline has been modified to verify that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly.
---
arch/x86_64/kernel/head.S | 1 arch/x86_64/kernel/setup.c | 9 -- arch/x86_64/kernel/trampoline.S | 168 ++++++++++++++++++++++++++++++++++++---- 3 files changed, 156 insertions(+), 22 deletions(-)
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-64bit-PIC-SMP-trampoline +1 -0
@@ -101,6 +101,7 @@ startup_32: .org 0x100 .globl startup_64 startup_64: +ENTRY(secondary_startup_64) /* We come here either from startup_32 * or directly from a 64bit bootloader. * Since we may have come directly from a bootloader we
arch/x86_64/kernel/setup.c renamed from arch/x86_64/kernel/setup.c~x86_64-64bit-PIC-SMP-trampoline +1 -8
@@ -446,15 +446,8 @@ void __init setup_arch(char **cmdline_p)reserve_bootmem_generic (ebda_addr, ebda_size);#ifdef CONFIG_SMP -/* -* But first pinch a few for the stack/trampoline stuff -* FIXME: Don't need the extra page at 4K, but need to fix -* trampoline before removing it. (see the GDT stuff) -*/ -reserve_bootmem_generic (PAGE_SIZE ,PAGE_SIZE ); -/* Reserve SMP trampoline */ -reserve_bootmem_generic (SMP_TRAMPOLINE_BASE ,PAGE_SIZE ); +reserve_bootmem_generic (SMP_TRAMPOLINE_BASE ,2 *PAGE_SIZE );#endif #ifdef CONFIG_ACPI_SLEEP
arch/x86_64/kernel/trampoline.S renamed from arch/x86_64/kernel/trampoline.S~x86_64-64bit-PIC-SMP-trampoline +154 -14
213 lines not on this page · raw message
_
Re: [PATCH 9/20] x86_64: 64bit PIC SMP trampoline
Hi!
Quoted 4 lines
that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly.
Well, it is silly, and it is 50 lines of dense assembly. can we get rid of it or get it shared with bootup version?
The REQUIRED_MASK1/2 look like something that could get out of sync, for example.
The rest of patch looks okay.
(The traditional checks were unneeded, so it is okay to drop them...)
Pavel
Quoted 52 lines
arch/x86_64/kernel/trampoline.S renamed from arch/x86_64/kernel/trampoline.S~x86_64-64bit-PIC-SMP-trampoline +52
-0+ .code16 +verify_cpu: + pushl $0 # Kill any dangerous flags + popfl + + /* minimum CPUID flags for x86-64 */ + /* see http://www.x86-64.org/lists/discuss/msg02971.html */ +#define REQUIRED_MASK1 ((1<<0)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<8)|\ + (1<<13)|(1<<15)|(1<<24)|(1<<25)|(1<<26)) +#define REQUIRED_MASK2 (1<<29) + + pushfl # check for cpuid + popl %eax + movl %eax, %ebx + xorl $0x200000,%eax + pushl %eax + popfl + pushfl + popl %eax + pushl %ebx + popfl + cmpl %eax, %ebx + jz no_longmode + + xorl %eax, %eax # See if cpuid 1 is implemented + cpuid + cmpl $0x1, %eax + jb no_longmode + + movl $0x01, %eax # Does the cpu have what it takes? + cpuid + andl $REQUIRED_MASK1, %edx + xorl $REQUIRED_MASK1, %edx + jnz no_longmode + + movl $0x80000000, %eax # See if extended cpuid is implemented + cpuid + cmpl $0x80000001, %eax + jb no_longmode + + movl $0x80000001, %eax # Does the cpu have what it takes? + cpuid + andl $REQUIRED_MASK2, %edx + xorl $REQUIRED_MASK2, %edx + jnz no_longmode + + ret # The cpu supports long mode + +no_longmode: + hlt + jmp no_longmode +
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 9/20] x86_64: 64bit PIC SMP trampoline
Quoted 10 lines · Pavel Machek
Hi!
Quoted 4 lines
that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly.
Well, it is silly, and it is 50 lines of dense assembly. can we get rid of it or get it shared with bootup version?
Hi Pavel,
Last patch in the series (patch 20) already does that. That patch just puts all the assembly at one place which everybody shares.
I know it is bad to introduce and delete your own code, but I kept that patch as last patch as all the other patches have got fair bit of testing in RHEL kernels and I wanted to make sure that if last patch breaks something problem can be isolated relatively easily.
Thanks
Vivek
Re: [PATCH 9/20] x86_64: 64bit PIC SMP trampoline
Quoted 14 lines · Vivek Goyal
Quoted 10 lines · Pavel Machek
Hi!
Quoted 4 lines
that long mode is supported. Asking if long mode is implemented is down right silly but we have traditionally had some of these checks, and they can't hurt anything. So when the totally ludicrous happens we just might handle it correctly.
Well, it is silly, and it is 50 lines of dense assembly. can we get rid of it or get it shared with bootup version?
Hi Pavel,
Quoted 7 lines
Last patch in the series (patch 20) already does that. That patch just puts all the assembly at one place which everybody shares.
I know it is bad to introduce and delete your own code, but I kept that patch as last patch as all the other patches have got fair bit of testing in RHEL kernels and I wanted to make sure that if last patch breaks something problem can be isolated relatively easily.
Ahha, okay. ACK, then.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 10/20 x86_64: wakeup.S Remove dead code
In reply to Vivek Goyalo Get rid of dead code in wakeup.S
o We never restore from saved_gdt, saved_idt, saved_ltd, saved_tss, saved_cr3, saved_cr4, saved_cr0, real_save_gdt, saved_efer, saved_efer2. Get rid of of associated code.
o Get rid of bogus_magic, bogus_31_magic and bogus_magic2. No longer being used.
---
arch/x86_64/kernel/acpi/wakeup.S | 57 --------------------------------------- 1 file changed, 1 insertion(+), 56 deletions(-)
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-get-rid-of-dead-code-in-suspend-resume +1 -56
@@ -258,8 +258,6 @@ gdt_48a: .word 0, 0 # gdt base (filled in later) -real_save_gdt: .word 0 - .quad 0 real_magic: .quad 0 video_mode: .quad 0 video_flags: .quad 0
@@ -272,10 +270,6 @@ bogus_32_magic: movb $0xb3,%al ; outb %al,$0x80 jmp bogus_32_magic -bogus_31_magic: - movb $0xb1,%al ; outb %al,$0x80 - jmp bogus_31_magic - bogus_cpu: movb $0xbc,%al ; outb %al,$0x80 jmp bogus_cpu
@@ -346,16 +340,6 @@ check_vesaa: _setbada: jmp setbada - .code64 -bogus_magic: - movw $0x0e00 + 'B', %ds:(0xb8018) - jmp bogus_magic - -bogus_magic2: - movw $0x0e00 + '2', %ds:(0xb8018) - jmp bogus_magic2 - - wakeup_stack_begin: # Stack grows down .org 0xff0
@@ -373,28 +357,11 @@ ENTRY(wakeup_end) # # Returned address is location of code in low memory (past data and stack) # + .code64 ENTRY(acpi_copy_wakeup_routine) pushq %rax - pushq %rcx pushq %rdx - sgdt saved_gdt - sidt saved_idt - sldt saved_ldt - str saved_tss - - movq %cr3, %rdx - movq %rdx, saved_cr3 - movq %cr4, %rdx - movq %rdx, saved_cr4 - movq %cr0, %rdx - movq %rdx, saved_cr0 - sgdt real_save_gdt - wakeup_start (,%rdi) - movl $MSR_EFER, %ecx - rdmsr - movl %eax, saved_efer - movl %edx, saved_efer2 - movl saved_video_mode, %edx movl %edx, video_mode - wakeup_start (,%rdi) movl acpi_video_flags, %edx
@@ -407,17 +374,8 @@ ENTRY(acpi_copy_wakeup_routine) cmpl $0x9abcdef0, %eax jne bogus_32_magic - # make sure %cr4 is set correctly (features, etc) - movl saved_cr4 - __START_KERNEL_map, %eax - movq %rax, %cr4 - - movl saved_cr0 - __START_KERNEL_map, %eax - movq %rax, %cr0 - jmp 1f # Flush pipelines -1: # restore the regs we used popq %rdx - popq %rcx popq %rax ENTRY(do_suspend_lowlevel_s4bios) ret
@@ -512,16 +470,3 @@ ENTRY(saved_eip) .quad 0 ENTRY(saved_esp) .quad 0 ENTRY(saved_magic) .quad 0 - -ALIGN -# saved registers -saved_gdt: .quad 0,0 -saved_idt: .quad 0,0 -saved_ldt: .quad 0 -saved_tss: .quad 0 - -saved_cr0: .quad 0 -saved_cr3: .quad 0 -saved_cr4: .quad 0 -saved_efer: .quad 0 -saved_efer2: .quad 0
_
Re: [PATCH 10/20] x86_64: wakeup.S Remove dead code
Quoted 8 lines · Vivek Goyal
o Get rid of dead code in
wakeup.So We never restore from
saved_gdt,saved_idt,saved_ltd,saved_tss,saved_cr3,saved_cr4,saved_cr0,real_save_gdt,saved_efer,saved_efer2. Get rid of of associated code.
Quoted 5 lines
o Get rid of
bogus_magic,bogus_31_magicandbogus_magic2. No longer being used.Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>
ACK and thanks.
Quoted 106 lines
diff -puN
arch/x86_64/kernel/acpi/wakeup.S~x86_64-get-rid-of-dead-code-in-suspend-resumearch/x86_64/kernel/acpi/wakeup.Sarch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-get-rid-of-dead-code-in-suspend-resume +1
-56@@ -258,8 +258,6 @@ gdt_48a: .word 0, 0 # gdt base (filled in later) -real_save_gdt: .word 0 - .quad 0 real_magic: .quad 0 video_mode: .quad 0 video_flags: .quad 0@@ -272,10 +270,6 @@ bogus_32_magic: movb $0xb3,%al ; outb %al,$0x80 jmp bogus_32_magic -bogus_31_magic: - movb $0xb1,%al ; outb %al,$0x80 - jmp bogus_31_magic - bogus_cpu: movb $0xbc,%al ; outb %al,$0x80 jmp bogus_cpu@@ -346,16 +340,6 @@ check_vesaa: _setbada: jmp setbada - .code64 -bogus_magic: - movw $0x0e00 + 'B', %ds:(0xb8018) - jmp bogus_magic - -bogus_magic2: - movw $0x0e00 + '2', %ds:(0xb8018) - jmp bogus_magic2 - - wakeup_stack_begin: # Stack grows down .org 0xff0@@ -373,28 +357,11 @@ ENTRY(wakeup_end) # # Returned address is location of code in low memory (past data and stack) # + .code64 ENTRY(acpi_copy_wakeup_routine) pushq %rax - pushq %rcx pushq %rdx - sgdt saved_gdt - sidt saved_idt - sldt saved_ldt - str saved_tss - - movq %cr3, %rdx - movq %rdx, saved_cr3 - movq %cr4, %rdx - movq %rdx, saved_cr4 - movq %cr0, %rdx - movq %rdx, saved_cr0 - sgdt real_save_gdt - wakeup_start (,%rdi) - movl $MSR_EFER, %ecx - rdmsr - movl %eax, saved_efer - movl %edx, saved_efer2 - movl saved_video_mode, %edx movl %edx, video_mode - wakeup_start (,%rdi) movl acpi_video_flags, %edx@@ -407,17 +374,8 @@ ENTRY(acpi_copy_wakeup_routine) cmpl $0x9abcdef0, %eax jne bogus_32_magic - # make sure %cr4 is set correctly (features, etc) - movl saved_cr4 - __START_KERNEL_map, %eax - movq %rax, %cr4 - - movl saved_cr0 - __START_KERNEL_map, %eax - movq %rax, %cr0 - jmp 1f # Flush pipelines -1: # restore the regs we used popq %rdx - popq %rcx popq %rax ENTRY(do_suspend_lowlevel_s4bios) ret@@ -512,16 +470,3 @@ ENTRY(saved_eip) .quad 0 ENTRY(saved_esp) .quad 0 ENTRY(saved_magic) .quad 0 - -ALIGN -# saved registers -saved_gdt: .quad 0,0 -saved_idt: .quad 0,0 -saved_ldt: .quad 0 -saved_tss: .quad 0 - -saved_cr0: .quad 0 -saved_cr3: .quad 0 -saved_cr4: .quad 0 -saved_efer: .quad 0 -saved_efer2: .quad 0_
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 11/20 x86_64: wakeup.S Rename labels to reflect right register names
In reply to Vivek Goyalo Use appropriate names for 64bit regsiters.
---
arch/x86_64/kernel/acpi/wakeup.S | 36 ++++++++++++++++++------------------ include/asm-x86_64/suspend.h | 12 ++++++------ 2 files changed, 24 insertions(+), 24 deletions(-)
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-rename-registers-to-reflect-right-names +18 -18
@@ -211,16 +211,16 @@ wakeup_long64: movw %ax, %es movw %ax, %fs movw %ax, %gs - movq saved_esp, %rsp + movq saved_rsp, %rsp movw $0x0e00 + 'x', %ds:(0xb8018) - movq saved_ebx, %rbx - movq saved_edi, %rdi - movq saved_esi, %rsi - movq saved_ebp, %rbp + movq saved_rbx, %rbx + movq saved_rdi, %rdi + movq saved_rsi, %rsi + movq saved_rbp, %rbp movw $0x0e00 + '!', %ds:(0xb801a) - movq saved_eip, %rax + movq saved_rip, %rax jmp *%rax .code32
@@ -408,13 +408,13 @@ do_suspend_lowlevel: movq %r15, saved_context_r15(%rip) pushfq ; popq saved_context_eflags(%rip) - movq $.L97, saved_eip(%rip) + movq $.L97, saved_rip(%rip) - movq %rsp,saved_esp - movq %rbp,saved_ebp - movq %rbx,saved_ebx - movq %rdi,saved_edi - movq %rsi,saved_esi + movq %rsp,saved_rsp + movq %rbp,saved_rbp + movq %rbx,saved_rbx + movq %rdi,saved_rdi + movq %rsi,saved_rsi addq $8, %rsp movl $3, %edi
@@ -461,12 +461,12 @@ do_suspend_lowlevel: .data ALIGN -ENTRY(saved_ebp) .quad 0 -ENTRY(saved_esi) .quad 0 -ENTRY(saved_edi) .quad 0 -ENTRY(saved_ebx) .quad 0 +ENTRY(saved_rbp) .quad 0 +ENTRY(saved_rsi) .quad 0 +ENTRY(saved_rdi) .quad 0 +ENTRY(saved_rbx) .quad 0 -ENTRY(saved_eip) .quad 0 -ENTRY(saved_esp) .quad 0 +ENTRY(saved_rip) .quad 0 +ENTRY(saved_rsp) .quad 0 ENTRY(saved_magic) .quad 0
include/asm-x86_64/suspend.h renamed from include/asm-x86_64/suspend.h~x86_64-wakeup.S-rename-registers-to-reflect-right-names +6 -6
@@ -45,12 +45,12 @@ extern unsigned long saved_context_eflagextern void fix_processor_context (void );#ifdef CONFIG_ACPI_SLEEP -extern unsigned long saved_eip; -extern unsigned long saved_esp; -extern unsigned long saved_ebp; -extern unsigned long saved_ebx; -extern unsigned long saved_esi; -extern unsigned long saved_edi; +extern unsigned long saved_rip; +extern unsigned long saved_rsp; +extern unsigned long saved_rbp; +extern unsigned long saved_rbx; +extern unsigned long saved_rsi; +extern unsigned long saved_rdi;/* routines for saving/restoring kernel state */ extern int acpi_save_state_mem (void );
_
Re: [PATCH 11/20] x86_64: wakeup.S Rename labels to reflect right register names
Quoted 6 lines · Vivek Goyal
o Use appropriate names for 64bit regsiters.
Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>
ACK.
Quoted 87 lines
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-rename-registers-to-reflect-right-names +18
-18@@ -211,16 +211,16 @@ wakeup_long64: movw %ax, %es movw %ax, %fs movw %ax, %gs - movq saved_esp, %rsp + movq saved_rsp, %rsp movw $0x0e00 + 'x', %ds:(0xb8018) - movq saved_ebx, %rbx - movq saved_edi, %rdi - movq saved_esi, %rsi - movq saved_ebp, %rbp + movq saved_rbx, %rbx + movq saved_rdi, %rdi + movq saved_rsi, %rsi + movq saved_rbp, %rbp movw $0x0e00 + '!', %ds:(0xb801a) - movq saved_eip, %rax + movq saved_rip, %rax jmp *%rax .code32@@ -408,13 +408,13 @@ do_suspend_lowlevel: movq %r15, saved_context_r15(%rip) pushfq ; popq saved_context_eflags(%rip) - movq $.L97, saved_eip(%rip) + movq $.L97, saved_rip(%rip) - movq %rsp,saved_esp - movq %rbp,saved_ebp - movq %rbx,saved_ebx - movq %rdi,saved_edi - movq %rsi,saved_esi + movq %rsp,saved_rsp + movq %rbp,saved_rbp + movq %rbx,saved_rbx + movq %rdi,saved_rdi + movq %rsi,saved_rsi addq $8, %rsp movl $3, %edi@@ -461,12 +461,12 @@ do_suspend_lowlevel: .data ALIGN -ENTRY(saved_ebp) .quad 0 -ENTRY(saved_esi) .quad 0 -ENTRY(saved_edi) .quad 0 -ENTRY(saved_ebx) .quad 0 +ENTRY(saved_rbp) .quad 0 +ENTRY(saved_rsi) .quad 0 +ENTRY(saved_rdi) .quad 0 +ENTRY(saved_rbx) .quad 0 -ENTRY(saved_eip) .quad 0 -ENTRY(saved_esp) .quad 0 +ENTRY(saved_rip) .quad 0 +ENTRY(saved_rsp) .quad 0 ENTRY(saved_magic) .quad 0diff -puN
include/asm-x86_64/suspend.h~x86_64-wakeup.S-rename-registers-to-reflect-right-namesinclude/asm-x86_64/suspend.hinclude/asm-x86_64/suspend.h renamed from include/asm-x86_64/suspend.h~x86_64-wakeup.S-rename-registers-to-reflect-right-names +6
-6@@ -45,12 +45,12 @@ extern unsigned long saved_context_eflagextern void fix_processor_context (void );#ifdef CONFIG_ACPI_SLEEP -extern unsigned long saved_eip; -extern unsigned long saved_esp; -extern unsigned long saved_ebp; -extern unsigned long saved_ebx; -extern unsigned long saved_esi; -extern unsigned long saved_edi; +extern unsigned long saved_rip; +extern unsigned long saved_rsp; +extern unsigned long saved_rbp; +extern unsigned long saved_rbx; +extern unsigned long saved_rsi; +extern unsigned long saved_rdi;/* routines for saving/restoring kernel state */ extern int acpi_save_state_mem (void );_
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 12/20 x86_64: wakeup.S Misc cleanup
In reply to Vivek Goyalo Various cleanups. One of the main purpose of cleanups is that make wakeup.S as close as possible to trampoline.S.
o Following are the changes
- Indentations for comments.
- Changed the gdt table to compact form and to resemble the one in trampoline.S
- Take the jump to 32bit from real mode using ljmpl. Makes code more readable.
- After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode"
- Stack is not used after real mode. So don't load stack in 32 bit mode.
- No need to enable PGE here.
- No need to do extra EFER read, anyway we trash the read contents.
- No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored.
- No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state.
---
arch/x86_64/kernel/acpi/wakeup.S | 111 +++++++++++++-------------------------- 1 file changed, 39 insertions(+), 72 deletions(-)
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-misc-cleanups +39 -72
@@ -30,11 +30,12 @@ wakeup_code: cld # setup data segment movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ds # Make ds:0 point to wakeup_start movw %ax, %ss - mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board + # Private stack is needed for ASUS board + mov $(wakeup_stack - wakeup_code), %sp - pushl $0 # Kill any dangerous flags + pushl $0 # Kill any dangerous flags popfl movl real_magic - wakeup_code, %eax
@@ -45,7 +46,7 @@ wakeup_code: jz 1f lcall $0xc000,$3 movw %cs, %ax - movw %ax, %ds # Bios might have played with that + movw %ax, %ds # Bios might have played with that movw %ax, %ss 1:
@@ -75,9 +76,12 @@ wakeup_code: jmp 1f 1: - .byte 0x66, 0xea # prefix + jmpi-opcode - .long wakeup_32 - __START_KERNEL_map - .word __KERNEL_CS + ljmpl *(wakeup_32_vector - wakeup_code) + + .balign 4 +wakeup_32_vector: + .long wakeup_32 - __START_KERNEL_map + .word __KERNEL32_CS, 0 .code32 wakeup_32:
@@ -96,65 +100,50 @@ wakeup_32: jnc bogus_cpu movl %edx,%edi - movw $__KERNEL_DS, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs + movl $__KERNEL_DS, %eax + movl %eax, %ds - movw $__KERNEL_DS, %ax - movw %ax, %ss - - mov $(wakeup_stack - __START_KERNEL_map), %esp movl saved_magic - __START_KERNEL_map, %eax cmpl $0x9abcdef0, %eax jne bogus_32_magic + movw $0x0e00 + 'i', %ds:(0xb8012) + movb $0xa8, %al ; outb %al, $0x80; + /* * Prepare for entering 64bits mode */ - /* Enable PAE mode and PGE */ + /* Enable PAE */ xorl %eax, %eax btsl $5, %eax - btsl $7, %eax movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ movl $(wakeup_level4_pgt - __START_KERNEL_map), %eax movl %eax, %cr3 - /* Setup EFER (Extended Feature Enable Register) */ - movl $MSR_EFER, %ecx - rdmsr - /* Fool rdmsr and reset %eax to avoid dependences */ - xorl %eax, %eax /* Enable Long Mode */ + xorl %eax, %eax btsl $_EFER_LME, %eax - /* Enable System Call */ - btsl $_EFER_SCE, %eax - /* No Execute supported? */ + /* No Execute supported? */ btl $20,%edi jnc 1f btsl $_EFER_NX, %eax -1: /* Make changes effective */ +1: movl $MSR_EFER, %ecx + xorl %edx, %edx wrmsr - wbinvd xorl %eax, %eax btsl $31, %eax /* Enable paging and in turn activate Long Mode */ btsl $0, %eax /* Enable protected mode */ - btsl $1, %eax /* Enable MP */ - btsl $4, %eax /* Enable ET */ - btsl $5, %eax /* Enable NE */ - btsl $16, %eax /* Enable WP */ - btsl $18, %eax /* Enable AM */ /* Make changes effective */ movl %eax, %cr0 + /* At this point: CR4.PAE must be 1 CS.L must be 0
@@ -162,11 +151,6 @@ wakeup_32: Next instruction must be a branch This must be on identity-mapped page */ - jmp reach_compatibility_mode -reach_compatibility_mode: - movw $0x0e00 + 'i', %ds:(0xb8012) - movb $0xa8, %al ; outb %al, $0x80; - /* * At this point we're in long mode but in 32bit compatibility mode * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
@@ -174,24 +158,19 @@ reach_compatibility_mode: * the new gdt/idt that has __KERNEL_CS with CS.L = 1. */ - movw $0x0e00 + 'n', %ds:(0xb8014) - movb $0xa9, %al ; outb %al, $0x80 - - /* Load new GDT with the 64bit segment using 32bit descriptor */ - movl $(pGDT32 - __START_KERNEL_map), %eax - lgdt (%eax) - - movl $(wakeup_jumpvector - __START_KERNEL_map), %eax /* Finally jump in 64bit mode */ - ljmp *(%eax) + ljmp *(wakeup_long64_vector - __START_KERNEL_map) -wakeup_jumpvector: - .long wakeup_long64 - __START_KERNEL_map - .word __KERNEL_CS + .balign 4 +wakeup_long64_vector: + .long wakeup_long64 - __START_KERNEL_map + .word __KERNEL_CS, 0 .code64 - /* Hooray, we are in Long 64-bit mode (but still running in low memory) */ + /* Hooray, we are in Long 64-bit mode (but still running in + * low memory) + */ wakeup_long64: /* * We must switch to a new descriptor in kernel space for the GDT
@@ -201,6 +180,9 @@ wakeup_long64: */ lgdt cpu_gdt_descr - __START_KERNEL_map + movw $0x0e00 + 'n', %ds:(0xb8014) + movb $0xa9, %al ; outb %al, $0x80 + movw $0x0e00 + 'u', %ds:(0xb8016) nop
@@ -228,32 +210,17 @@ wakeup_long64: .align 64 gdta: .word 0, 0, 0, 0 # dummy - - .word 0, 0, 0, 0 # unused - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9B00 # code read/exec. ??? Why I need 0x9B00 (as opposed to 0x9A00 in order for this to work?) - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -# this is 64bit descriptor for code - .word 0xFFFF - .word 0 - .word 0x9A00 # code read/exec - .word 0x00AF # as above, but it is long mode and with D=0 + /* ??? Why I need the accessed bit set in order for this to work? */ + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS idt_48a: .word 0 # idt limit = 0 .word 0, 0 # idt base = 0L gdt_48a: - .word 0x8000 # gdt limit=2048, + .word 0x800 # gdt limit=2048, # 256 GDT entries .word 0, 0 # gdt base (filled in later)
@@ -263,7 +230,7 @@ video_mode: .quad 0 video_flags: .quad 0 bogus_real_magic: - movb $0xba,%al ; outb %al,$0x80 + movb $0xba,%al ; outb %al,$0x80 jmp bogus_real_magic bogus_32_magic:
_
Re: [PATCH 12/20] x86_64: wakeup.S Misc cleanup
Hi!
Quoted 20 lines
o Various cleanups. One of the main purpose of cleanups is that make
wakeup.Sas close as possible totrampoline.S.o Following are the changes
- Indentations for comments.
- Changed the gdt table to compact form and to resemble the one intrampoline.S
- Take the jump to 32bit from real mode using ljmpl. Makes code more readable.
- After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode"
- Stack is not used after real mode. So don't load stack in 32 bit mode.
- No need to enable PGE here.
- No need to do extra EFER read, anyway we trash the read contents.
- No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored.
- No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state.
Quoted 2 lines
Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>
ACK, minor nitpicks:
arch/x86_64/kernel/acpi/wakeup.S wakeup_long64: · line 213
Quoted 1 line
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-misc-cleanups +1
-0+ /* ??? Why I need the accessed bit set in order for this to work? */
Yes, I'd like to know :-).
arch/x86_64/kernel/acpi/wakeup.S wakeup_long64: · line 216
Quoted 3 lines
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-misc-cleanups +3
-0+ .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS
Can we get a comment telling us what to keep it in sync with?
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Re: [PATCH 12/20] x86_64: wakeup.S Misc cleanup
Quoted 22 lines · Pavel Machek
Hi!
Quoted 20 lines
o Various cleanups. One of the main purpose of cleanups is that make
wakeup.Sas close as possible totrampoline.S.o Following are the changes
- Indentations for comments.
- Changed the gdt table to compact form and to resemble the one intrampoline.S
- Take the jump to 32bit from real mode using ljmpl. Makes code more readable.
- After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode"
- Stack is not used after real mode. So don't load stack in 32 bit mode.
- No need to enable PGE here.
- No need to do extra EFER read, anyway we trash the read contents.
- No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored.
- No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state.
Quoted 9 lines
Quoted 2 lines
Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>ACK, minor nitpicks:
Review
Quoted 1 line
(quoted diff) +1
-0+ /* ??? Why I need the accessed bit set in order for this to work? */Yes, I'd like to know :-).
I don't know. :-( May be it is present because in original code also it is present. I just changed it from 9b00 to 9a00 for __KERNEL32_CS and __KERNEL_CS to mark the entry unaccessed and it works fine for me.
Eric, any thoughts on this. ?
Quoted 6 lines
Review
Quoted 3 lines
(quoted diff) +3
-0+ .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DSCan we get a comment telling us what to keep it in sync with?
Ok. Just added a line mentioning that keep it in sync with trampoline.S
Please find attached the revised patch.
Thanks
Vivek
o Various cleanups. One of the main purpose of cleanups is that make wakeup.S as close as possible to trampoline.S.
o Following are the changes
- Indentations for comments.
- Changed the gdt table to compact form and to resemble the one in trampoline.S
- Take the jump to 32bit from real mode using ljmpl. Makes code more readable.
- After enabling long mode, directly take a long jump for 64bit mode. No need to take an extra jump to "reach_comaptibility_mode"
- Stack is not used after real mode. So don't load stack in 32 bit mode.
- No need to enable PGE here.
- No need to do extra EFER read, anyway we trash the read contents.
- No need to enable system call (EFER_SCE). Anyway it will be enabled when original EFER is restored.
- No need to set MP, ET, NE, WP, AM bits in cr0. Very soon we will reload the original cr0 while restroing the processor state.
---
arch/x86_64/kernel/acpi/wakeup.S | 112 +++++++++++++-------------------------- 1 file changed, 40 insertions(+), 72 deletions(-)
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-wakeup.S-misc-cleanups +40 -72
@@ -30,11 +30,12 @@ wakeup_code: cld # setup data segment movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start + movw %ax, %ds # Make ds:0 point to wakeup_start movw %ax, %ss - mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board + # Private stack is needed for ASUS board + mov $(wakeup_stack - wakeup_code), %sp - pushl $0 # Kill any dangerous flags + pushl $0 # Kill any dangerous flags popfl movl real_magic - wakeup_code, %eax
@@ -45,7 +46,7 @@ wakeup_code: jz 1f lcall $0xc000,$3 movw %cs, %ax - movw %ax, %ds # Bios might have played with that + movw %ax, %ds # Bios might have played with that movw %ax, %ss 1:
@@ -75,9 +76,12 @@ wakeup_code: jmp 1f 1: - .byte 0x66, 0xea # prefix + jmpi-opcode - .long wakeup_32 - __START_KERNEL_map - .word __KERNEL_CS + ljmpl *(wakeup_32_vector - wakeup_code) + + .balign 4 +wakeup_32_vector: + .long wakeup_32 - __START_KERNEL_map + .word __KERNEL32_CS, 0 .code32 wakeup_32:
@@ -96,65 +100,50 @@ wakeup_32: jnc bogus_cpu movl %edx,%edi - movw $__KERNEL_DS, %ax - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs + movl $__KERNEL_DS, %eax + movl %eax, %ds - movw $__KERNEL_DS, %ax - movw %ax, %ss - - mov $(wakeup_stack - __START_KERNEL_map), %esp movl saved_magic - __START_KERNEL_map, %eax cmpl $0x9abcdef0, %eax jne bogus_32_magic + movw $0x0e00 + 'i', %ds:(0xb8012) + movb $0xa8, %al ; outb %al, $0x80; + /* * Prepare for entering 64bits mode */ - /* Enable PAE mode and PGE */ + /* Enable PAE */ xorl %eax, %eax btsl $5, %eax - btsl $7, %eax movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ movl $(wakeup_level4_pgt - __START_KERNEL_map), %eax movl %eax, %cr3 - /* Setup EFER (Extended Feature Enable Register) */ - movl $MSR_EFER, %ecx - rdmsr - /* Fool rdmsr and reset %eax to avoid dependences */ - xorl %eax, %eax /* Enable Long Mode */ + xorl %eax, %eax btsl $_EFER_LME, %eax - /* Enable System Call */ - btsl $_EFER_SCE, %eax - /* No Execute supported? */ + /* No Execute supported? */ btl $20,%edi jnc 1f btsl $_EFER_NX, %eax -1: /* Make changes effective */ +1: movl $MSR_EFER, %ecx + xorl %edx, %edx wrmsr - wbinvd xorl %eax, %eax btsl $31, %eax /* Enable paging and in turn activate Long Mode */ btsl $0, %eax /* Enable protected mode */ - btsl $1, %eax /* Enable MP */ - btsl $4, %eax /* Enable ET */ - btsl $5, %eax /* Enable NE */ - btsl $16, %eax /* Enable WP */ - btsl $18, %eax /* Enable AM */ /* Make changes effective */ movl %eax, %cr0 + /* At this point: CR4.PAE must be 1 CS.L must be 0
@@ -162,11 +151,6 @@ wakeup_32: Next instruction must be a branch This must be on identity-mapped page */ - jmp reach_compatibility_mode -reach_compatibility_mode: - movw $0x0e00 + 'i', %ds:(0xb8012) - movb $0xa8, %al ; outb %al, $0x80; - /* * At this point we're in long mode but in 32bit compatibility mode * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
@@ -174,24 +158,19 @@ reach_compatibility_mode: * the new gdt/idt that has __KERNEL_CS with CS.L = 1. */ - movw $0x0e00 + 'n', %ds:(0xb8014) - movb $0xa9, %al ; outb %al, $0x80 - - /* Load new GDT with the 64bit segment using 32bit descriptor */ - movl $(pGDT32 - __START_KERNEL_map), %eax - lgdt (%eax) - - movl $(wakeup_jumpvector - __START_KERNEL_map), %eax /* Finally jump in 64bit mode */ - ljmp *(%eax) + ljmp *(wakeup_long64_vector - __START_KERNEL_map) -wakeup_jumpvector: - .long wakeup_long64 - __START_KERNEL_map - .word __KERNEL_CS + .balign 4 +wakeup_long64_vector: + .long wakeup_long64 - __START_KERNEL_map + .word __KERNEL_CS, 0 .code64 - /* Hooray, we are in Long 64-bit mode (but still running in low memory) */ + /* Hooray, we are in Long 64-bit mode (but still running in + * low memory) + */ wakeup_long64: /* * We must switch to a new descriptor in kernel space for the GDT
@@ -201,6 +180,9 @@ wakeup_long64: */ lgdt cpu_gdt_descr - __START_KERNEL_map + movw $0x0e00 + 'n', %ds:(0xb8014) + movb $0xa9, %al ; outb %al, $0x80 + movw $0x0e00 + 'u', %ds:(0xb8016) nop
@@ -227,33 +209,19 @@ wakeup_long64: .align 64 gdta: + /* Good to keep gdt in sync with the one in trampoline.S */ .word 0, 0, 0, 0 # dummy - - .word 0, 0, 0, 0 # unused - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9B00 # code read/exec. ??? Why I need 0x9B00 (as opposed to 0x9A00 in order for this to work?) - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) - - .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb) - .word 0 # base address = 0 - .word 0x9200 # data read/write - .word 0x00CF # granularity = 4096, 386 - # (+5th nibble of limit) -# this is 64bit descriptor for code - .word 0xFFFF - .word 0 - .word 0x9A00 # code read/exec - .word 0x00AF # as above, but it is long mode and with D=0 + /* ??? Why I need the accessed bit set in order for this to work? */ + .quad 0x00cf9b000000ffff # __KERNEL32_CS + .quad 0x00af9b000000ffff # __KERNEL_CS + .quad 0x00cf93000000ffff # __KERNEL_DS idt_48a: .word 0 # idt limit = 0 .word 0, 0 # idt base = 0L gdt_48a: - .word 0x8000 # gdt limit=2048, + .word 0x800 # gdt limit=2048, # 256 GDT entries .word 0, 0 # gdt base (filled in later)
@@ -263,7 +231,7 @@ video_mode: .quad 0 video_flags: .quad 0 bogus_real_magic: - movb $0xba,%al ; outb %al,$0x80 + movb $0xba,%al ; outb %al,$0x80 jmp bogus_real_magic bogus_32_magic:
_
PATCH 13/20 x86_64: 64bit PIC ACPI wakeup trampoline
In reply to Vivek Goyalo Moved wakeup_level4_pgt into the wakeup routine so we can run the kernel above 4G.
o Now we first go to 64bit mode and continue to run from trampoline and then then start accessing kernel symbols and restore processor context. This enables us to resume even in relocatable kernel context when kernel might not be loaded at physical addr it has been compiled for.
o Removed the need for modifying any existing kernel page table.
o Increased the size of the wakeup routine to 8K. This is required as wake page tables are on trampoline itself and they got to be at 4K boundary, hence one page is not sufficient.
---
arch/x86_64/kernel/acpi/sleep.c | 22 ++------------ arch/x86_64/kernel/acpi/wakeup.S | 59 ++++++++++++++++++++++++--------------- arch/x86_64/kernel/head.S | 9 ----- 3 files changed, 41 insertions(+), 49 deletions(-)
arch/x86_64/kernel/acpi/sleep.c renamed from arch/x86_64/kernel/acpi/sleep.c~x86_64-64bit-ACPI-wakeup-trampoline +4 -18
@@ -60,17 +60,6 @@ extern char wakeup_start, wakeup_end;extern unsigned long FASTCALL (acpi_copy_wakeup_routine (unsigned long )); -static pgd_t low_ptr; - -static void init_low_mapping (void ) -{ -pgd_t *slot0 =pgd_offset (current->mm,0UL ); - low_ptr = *slot0; -set_pgd (slot0, *pgd_offset (current->mm,PAGE_OFFSET )); -WARN_ON (num_online_cpus () !=1 ); -local_flush_tlb (); -} -/** * acpi_save_state_mem - save kernel state *
@@ -79,8 +68,6 @@ static void init_low_mapping(void)*/ int acpi_save_state_mem (void ) { -init_low_mapping (); -memcpy ((void *)acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);acpi_copy_wakeup_routine (acpi_wakeup_address);
@@ -93,8 +80,6 @@ int acpi_save_state_mem(void)*/ void acpi_restore_state_mem (void ) { -set_pgd (pgd_offset (current->mm,0UL ), low_ptr); -local_flush_tlb (); }/**
@@ -107,10 +92,11 @@ void acpi_restore_state_mem(void)*/ void __init acpi_reserve_bootmem (void ) { - acpi_wakeup_address = (unsigned long )alloc_bootmem_low (PAGE_SIZE ); -if ((&wakeup_end - &wakeup_start) >PAGE_SIZE ) + acpi_wakeup_address = (unsigned long )alloc_bootmem_low (PAGE_SIZE *2 ); +if ((&wakeup_end - &wakeup_start) > (PAGE_SIZE *2 ))printk (KERN_CRIT -"ACPI: Wakeup code way too big, will crash on attempt to suspend\n" ); +"ACPI: Wakeup code way too big, will crash on attempt" +" to suspend\n" ); }static int __init acpi_sleep_setup (char *str)
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-64bit-ACPI-wakeup-trampoline +37 -22
142 lines not on this page · raw message
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-64bit-ACPI-wakeup-trampoline +0 -9
@@ -300,15 +300,6 @@ NEXT_PAGE(level2_kernel_pgt) .data -#ifdef CONFIG_ACPI_SLEEP - .align PAGE_SIZE -ENTRY(wakeup_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE -#endif - #ifndef CONFIG_HOTPLUG_CPU __INITDATA #endif
_
Re: [PATCH 13/20] x86_64: 64bit PIC ACPI wakeup trampoline
Quoted 10 lines · Vivek Goyal
o Moved
wakeup_level4_pgtinto the wakeup routine so we can run the kernel above 4G.o Now we first go to 64bit mode and continue to run from trampoline and then then start accessing kernel symbols and restore processor context. This enables us to resume even in relocatable kernel context when kernel might not be loaded at physical addr it has been compiled for.
Quoted 8 lines
o Removed the need for modifying any existing kernel page table.
o Increased the size of the wakeup routine to 8K. This is required as wake page tables are on trampoline itself and they got to be at 4K boundary, hence one page is not sufficient.
Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>
Looks okay to me, ACK.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
PATCH 14/20 x86_64: Modify discover_ebda to use virtual address
In reply to Vivek Goyal---
arch/x86_64/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86_64/kernel/setup.c renamed from arch/x86_64/kernel/setup.c~x86_64-Modify-discover_ebda-to-use-virtual-addresses +2 -2
@@ -327,10 +327,10 @@ static void discover_ebda(void)* there is a real-mode segmented pointer pointing to the * 4K EBDA area at 0x40E */ - ebda_addr = *(unsigned short *)EBDA_ADDR_POINTER ; + ebda_addr = *(unsigned short *)__va (EBDA_ADDR_POINTER ); ebda_addr <<=4 ; - ebda_size = *(unsigned short *)(unsigned long )ebda_addr; + ebda_size = *(unsigned short *)__va (ebda_addr);/* Round EBDA up to pages */ if (ebda_size ==0 )
_
PATCH 15/20 x86_64: Remove the identity mapping as early as possible
In reply to Vivek GoyalWith the rewrite of the SMP trampoline and the early page allocator there is nothing that needs identity mapped pages, once we start executing C code.
So add zap_identity_mappings into head64.c and remove zap_low_mappings() from much later in the code. The functions
are subtly different thus the name change.
This also kills boot_level4_pgt which was from an earlier attempt to move the identity mappings as early as possible, and is now no longer needed. Essentially I have replaced boot_level4_pgt with trampoline_level4_pgt in trampoline.S
---
arch/x86_64/kernel/head.S | 39 ++++++++++++++------------------------- arch/x86_64/kernel/head64.c | 16 ++++++++++------ arch/x86_64/kernel/setup.c | 2 -- arch/x86_64/kernel/setup64.c | 1 - arch/x86_64/mm/init.c | 24 ------------------------ include/asm-x86_64/pgtable.h | 1 - include/asm-x86_64/proto.h | 2 -- 7 files changed, 24 insertions(+), 61 deletions(-)
arch/x86_64/kernel/head64.c renamed from arch/x86_64/kernel/head64.c~x86_64-Remove-the-identity-mapping-as-early-as-possible +10 -6
@@ -18,8 +18,16 @@#include <asm/setup.h> #include <asm/desc.h> #include <asm/pgtable.h> +#include <asm/tlbflush.h> #include <asm/sections.h> +static void __init zap_identity_mappings (void ) +{ +pgd_t *pgd =pgd_offset_k (0UL ); +pgd_clear (pgd); +__flush_tlb (); +} +/* Don't add a printk in there. printk relies on the PDA which is not initialized yet. */ static void __init clear_bss (void )
@@ -56,6 +64,8 @@ void __init x86_64_start_kernel(char * r {int i; +/* Make NULL pointers segfault */ +zap_identity_mappings ();for (i =0 ; i <256 ; i++)set_intr_gate (i, early_idt_handler); asmvolatile ("lidt %0" ::"m" (idt_descr));
@@ -63,12 +73,6 @@ void __init x86_64_start_kernel(char * rearly_printk ("Kernel alive\n" ); -/* -* switch to init_level4_pgt from boot_level4_pgt -*/ -memcpy (init_level4_pgt, boot_level4_pgt,PTRS_PER_PGD *sizeof (pgd_t)); - asmvolatile ("movq %0,%%cr3" ::"r" (__pa_symbol (&init_level4_pgt))); -for (i =0 ; i <NR_CPUS ; i++)cpu_pda (i) = &boot_cpu_pda[i];
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-Remove-the-identity-mapping-as-early-as-possible +14 -25
@@ -71,7 +71,7 @@ startup_32: movl %eax, %cr4 /* Setup early boot stage 4 level pagetables */ - movl $(boot_level4_pgt - __START_KERNEL_map), %eax + movl $(init_level4_pgt - __START_KERNEL_map), %eax movl %eax, %cr3 /* Setup EFER (Extended Feature Enable Register) */
@@ -115,7 +115,7 @@ ENTRY(secondary_startup_64) movq %rax, %cr4 /* Setup early boot stage 4 level pagetables. */ - movq $(boot_level4_pgt - __START_KERNEL_map), %rax + movq $(init_level4_pgt - __START_KERNEL_map), %rax movq %rax, %cr3 /* Check if nx is implemented */
@@ -266,9 +266,19 @@ ENTRY(name) i = i + 1 ; \ .endr + /* + * This default setting generates an ident mapping at address 0x100000 + * and a mapping for the kernel that precisely maps virtual address + * 0xffffffff80000000 to physical address 0x000000. (always using + * 2Mbyte large pages provided by PAE mode) + */ NEXT_PAGE(init_level4_pgt) - /* This gets initialized in x86_64_start_kernel */ - .fill 512,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 257,8,0 + .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE + .fill 252,8,0 + /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ + .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE NEXT_PAGE(level3_ident_pgt) .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
@@ -299,27 +309,6 @@ NEXT_PAGE(level2_kernel_pgt) #undef NEXT_PAGE .data - -#ifndef CONFIG_HOTPLUG_CPU - __INITDATA -#endif - /* - * This default setting generates an ident mapping at address 0x100000 - * and a mapping for the kernel that precisely maps virtual address - * 0xffffffff80000000 to physical address 0x000000. (always using - * 2Mbyte large pages provided by PAE mode) - */ - .align PAGE_SIZE -ENTRY(boot_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 257,8,0 - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 252,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE - - .data - .align 16 .globl cpu_gdt_descr cpu_gdt_descr:
arch/x86_64/kernel/setup64.c renamed from arch/x86_64/kernel/setup64.c~x86_64-Remove-the-identity-mapping-as-early-as-possible +0 -1
@@ -202,7 +202,6 @@ void __cpuinit cpu_init (void)/* CPU 0 is initialised in head64.c */ if (cpu !=0 ) {pda_init (cpu); -zap_low_mappings (cpu); }else estacks = boot_exception_stacks;
arch/x86_64/kernel/setup.c renamed from arch/x86_64/kernel/setup.c~x86_64-Remove-the-identity-mapping-as-early-as-possible +0 -2
@@ -396,8 +396,6 @@ void __init setup_arch(char **cmdline_p)dmi_scan_machine (); -zap_low_mappings (0 ); -#ifdef CONFIG_ACPI /* * Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
arch/x86_64/mm/init.c renamed from arch/x86_64/mm/init.c~x86_64-Remove-the-identity-mapping-as-early-as-possible +0 -24
@@ -378,21 +378,6 @@ void __meminit init_memory_mapping(unsig__flush_tlb_all (); } -void __cpuinit zap_low_mappings (int cpu) -{ -if (cpu ==0 ) { -pgd_t *pgd =pgd_offset_k (0UL ); -pgd_clear (pgd); - }else { -/* -* For AP's, zap the low identity mappings by changing the cr3 -* to init_level4_pgt and doing local flush tlb all -*/ - asmvolatile ("movq %0,%%cr3" ::"r" (__pa_symbol (&init_level4_pgt))); - } -__flush_tlb_all (); -} -#ifndef CONFIG_NUMA void __init paging_init (void ) {
@@ -576,15 +561,6 @@ void __init mem_init(void) reservedpages << (PAGE_SHIFT -10 ), datasize >>10 , initsize >> 10); - -#ifdef CONFIG_SMP -/* -* Sync boot_level4_pgt mappings with the init_level4_pgt -* except for the low identity mappings which are already zapped -* in init_level4_pgt. This sync-up is essential for AP's bringup -*/ -memcpy (boot_level4_pgt+1 , init_level4_pgt+1 , (PTRS_PER_PGD -1 )*sizeof (pgd_t)); -#endif }void free_init_pages (char *what,unsigned long begin,unsigned long end)
include/asm-x86_64/pgtable.h renamed from include/asm-x86_64/pgtable.h~x86_64-Remove-the-identity-mapping-as-early-as-possible +0 -1
@@ -18,7 +18,6 @@ extern pud_t level3_kernel_pgt[512];extern pud_t level3_ident_pgt[512 ];extern pmd_t level2_kernel_pgt[512 ];extern pgd_t init_level4_pgt[]; -extern pgd_t boot_level4_pgt[];extern unsigned long __supported_pte_mask;#define swapper_pg_dir init_level4_pgt
include/asm-x86_64/proto.h renamed from include/asm-x86_64/proto.h~x86_64-Remove-the-identity-mapping-as-early-as-possible +0 -2
@@ -11,8 +11,6 @@ struct pt_regs;extern void start_kernel (void );extern void pda_init (int ); -extern void zap_low_mappings (int cpu); -extern void early_idt_handler (void );extern void mcheck_init (struct cpuinfo_x86 *c);
_
PATCH 16/20 x86_64: __pa and __pa_symbol address space separation
In reply to Vivek GoyalCurrently __pa_symbol is for use with symbols in the kernel address map and __pa is for use with pointers into the physical memory map. But the code is implemented so you can usually interchange the two.
__pa which is much more common can be implemented much more cheaply if it is it doesn't have to worry about any other kernel address spaces. This is especially true with a relocatable kernel as __pa_symbol needs to peform an extra variable read to resolve the address.
There is a third macro that is added for the vsyscall data __pa_vsymbol for finding the physical addesses of vsyscall pages.
Most of this patch is simply sorting through the references to __pa or __pa_symbol and using the proper one. A little of it is continuing to use a physical address when we have it instead of recalculating it several times.
swapper_pgd is now NULL. leave_mm now uses init_mm.pgd and init_mm.pgd is initialized at boot (instead of compile time) to the physmem virtual mapping of init_level4_pgd. The physical address changed.
Except for the for EMPTY_ZERO page all of the remaining references to __pa_symbol appear to be during kernel initialization. So this should reduce the cost of __pa in the common case, even on a relocated kernel.
As this is technically a semantic change we need to be on the lookout for anything I missed. But it works for me (tm).
---
arch/i386/kernel/alternative.c | 8 ++++---- arch/i386/mm/init.c | 15 ++++++++------- arch/x86_64/kernel/machine_kexec.c | 14 +++++++------- arch/x86_64/kernel/setup.c | 9 +++++---- arch/x86_64/kernel/smp.c | 2 +- arch/x86_64/kernel/vsyscall.c | 10 ++++++++-- arch/x86_64/mm/init.c | 21 +++++++++++---------- arch/x86_64/mm/pageattr.c | 17 ++++++++++------- include/asm-x86_64/page.h | 6 ++---- include/asm-x86_64/pgtable.h | 4 ++-- 10 files changed, 58 insertions(+), 48 deletions(-)
arch/i386/kernel/alternative.c renamed from arch/i386/kernel/alternative.c~x86_64-__pa-and-__pa_symbol-address-space-separation +4 -4
@@ -348,8 +348,8 @@ void __init alternative_instructions(voiif (no_replacement) {printk (KERN_INFO "(SMP-)alternatives turned off\n" );free_init_pages ("SMP alternatives" , - (unsigned long )__smp_alt_begin, - (unsigned long )__smp_alt_end); +__pa_symbol (&__smp_alt_begin), +__pa_symbol (&__smp_alt_end));return ; }
@@ -378,8 +378,8 @@ void __init alternative_instructions(voi _text, _etext); }free_init_pages ("SMP alternatives" , - (unsigned long )__smp_alt_begin, - (unsigned long )__smp_alt_end); +__pa_symbol (&__smp_alt_begin), +__pa_symbol (&__smp_alt_end)); }else {alternatives_smp_save (__smp_alt_instructions, __smp_alt_instructions_end);
arch/i386/mm/init.c renamed from arch/i386/mm/init.c~x86_64-__pa-and-__pa_symbol-address-space-separation +8 -7
@@ -778,10 +778,11 @@ void free_init_pages(char *what, unsigneunsigned long addr;for (addr = begin; addr < end; addr +=PAGE_SIZE ) { -ClearPageReserved (virt_to_page (addr)); -init_page_count (virt_to_page (addr)); -memset ((void *)addr,POISON_FREE_INITMEM ,PAGE_SIZE ); -free_page (addr); +struct page *page =pfn_to_page (addr >>PAGE_SHIFT ); +ClearPageReserved (page); +init_page_count (page); +memset (page_address (page),POISON_FREE_INITMEM ,PAGE_SIZE ); +__free_page (page); totalram_pages++; }printk (KERN_INFO "Freeing %s: %ldk freed\n" , what, (end - begin) >>10 );
@@ -790,14 +791,14 @@ void free_init_pages(char *what, unsignevoid free_initmem (void ) {free_init_pages ("unused kernel memory" , - (unsigned long )(&__init_begin), - (unsigned long )(&__init_end)); +__pa_symbol (&__init_begin), +__pa_symbol (&__init_end)); }#ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem (unsigned long start,unsigned long end) { -free_init_pages ("initrd memory" , start, end); +free_init_pages ("initrd memory" ,__pa (start),__pa (end)); }#endif
arch/x86_64/kernel/machine_kexec.c renamed from arch/x86_64/kernel/machine_kexec.c~x86_64-__pa-and-__pa_symbol-address-space-separation +7 -7
@@ -191,19 +191,19 @@ NORET_TYPE void machine_kexec(struct kim page_list[PA_CONTROL_PAGE ] =__pa (control_page); page_list[VA_CONTROL_PAGE ] = (unsigned long )relocate_kernel; - page_list[PA_PGD ] =__pa (kexec_pgd); + page_list[PA_PGD ] =__pa_symbol (&kexec_pgd); page_list[VA_PGD ] = (unsigned long )kexec_pgd; - page_list[PA_PUD_0 ] =__pa (kexec_pud0); + page_list[PA_PUD_0 ] =__pa_symbol (&kexec_pud0); page_list[VA_PUD_0 ] = (unsigned long )kexec_pud0; - page_list[PA_PMD_0 ] =__pa (kexec_pmd0); + page_list[PA_PMD_0 ] =__pa_symbol (&kexec_pmd0); page_list[VA_PMD_0 ] = (unsigned long )kexec_pmd0; - page_list[PA_PTE_0 ] =__pa (kexec_pte0); + page_list[PA_PTE_0 ] =__pa_symbol (&kexec_pte0); page_list[VA_PTE_0 ] = (unsigned long )kexec_pte0; - page_list[PA_PUD_1 ] =__pa (kexec_pud1); + page_list[PA_PUD_1 ] =__pa_symbol (&kexec_pud1); page_list[VA_PUD_1 ] = (unsigned long )kexec_pud1; - page_list[PA_PMD_1 ] =__pa (kexec_pmd1); + page_list[PA_PMD_1 ] =__pa_symbol (&kexec_pmd1); page_list[VA_PMD_1 ] = (unsigned long )kexec_pmd1; - page_list[PA_PTE_1 ] =__pa (kexec_pte1); + page_list[PA_PTE_1 ] =__pa_symbol (&kexec_pte1); page_list[VA_PTE_1 ] = (unsigned long )kexec_pte1; page_list[PA_TABLE_PAGE] =
arch/x86_64/kernel/setup.c renamed from arch/x86_64/kernel/setup.c~x86_64-__pa-and-__pa_symbol-address-space-separation +5 -4
@@ -365,11 +365,12 @@ void __init setup_arch(char **cmdline_p) init_mm.end_code = (unsigned long ) &_etext; init_mm.end_data = (unsigned long ) &_edata; init_mm.brk = (unsigned long ) &_end; + init_mm.pgd =__va (__pa_symbol (&init_level4_pgt)); - code_resource.start =virt_to_phys (&_text); - code_resource.end =virt_to_phys (&_etext)-1 ; - data_resource.start =virt_to_phys (&_etext); - data_resource.end =virt_to_phys (&_edata)-1 ; + code_resource.start =__pa_symbol (&_text); + code_resource.end =__pa_symbol (&_etext)-1 ; + data_resource.start =__pa_symbol (&_etext); + data_resource.end =__pa_symbol (&_edata)-1 ;early_identify_cpu (&boot_cpu_data);
arch/x86_64/kernel/smp.c renamed from arch/x86_64/kernel/smp.c~x86_64-__pa-and-__pa_symbol-address-space-separation +1 -1
@@ -76,7 +76,7 @@ static inline void leave_mm(int cpu)if (read_pda (mmu_state) ==TLBSTATE_OK )BUG ();cpu_clear (cpu,read_pda (active_mm)->cpu_vm_mask); -load_cr3 (swapper_pg_dir); +load_cr3 (init_mm.pgd); }/*
arch/x86_64/kernel/vsyscall.c renamed from arch/x86_64/kernel/vsyscall.c~x86_64-__pa-and-__pa_symbol-address-space-separation +8 -2
@@ -49,6 +49,12 @@ int __vgetcpu_mode __section_vgetcpu_mod#include <asm/unistd.h> +#define __pa_vsymbol (x) \ + ({unsigned long v; \ + extern char __vsyscall_0; \ + asm("" : "=r" (v) : "0" (x)); \ + ((v - VSYSCALL_FIRST_PAGE) + __pa_symbol(&__vsyscall_0)); }) + static __always_inline void timeval_normalize(struct timeval * tv) {time_t __sec;
@@ -201,10 +207,10 @@ static int vsyscall_sysctl_change(ctl_tareturn ret;/* gcc has some trouble with __va(__pa()), so just do it this way. */ - map1 =ioremap (__pa_symbol (&vsysc1),2 ); + map1 =ioremap (__pa_vsymbol (&vsysc1),2 );if (!map1)return -ENOMEM ; - map2 =ioremap (__pa_symbol (&vsysc2),2 ); + map2 =ioremap (__pa_vsymbol (&vsysc2),2 );if (!map2) { ret = -ENOMEM ; goto out;
arch/x86_64/mm/init.c renamed from arch/x86_64/mm/init.c~x86_64-__pa-and-__pa_symbol-address-space-separation +11 -10
@@ -572,11 +572,11 @@ void free_init_pages(char *what, unsigneprintk (KERN_INFO "Freeing %s: %ldk freed\n" , what, (end - begin) >>10 );for (addr = begin; addr < end; addr +=PAGE_SIZE ) { -ClearPageReserved (virt_to_page (addr)); -init_page_count (virt_to_page (addr)); -memset ((void *)(addr & ~(PAGE_SIZE -1 )), -POISON_FREE_INITMEM ,PAGE_SIZE ); -free_page (addr); +struct page *page =pfn_to_page (addr >>PAGE_SHIFT ); +ClearPageReserved (page); +init_page_count (page); +memset (page_address (page),POISON_FREE_INITMEM ,PAGE_SIZE ); +__free_page (page); totalram_pages++; } }
@@ -586,17 +586,18 @@ void free_initmem(void)memset (__initdata_begin,POISON_FREE_INITDATA , __initdata_end - __initdata_begin);free_init_pages ("unused kernel memory" , - (unsigned long )(&__init_begin), - (unsigned long )(&__init_end)); +__pa_symbol (&__init_begin), +__pa_symbol (&__init_end)); }#ifdef CONFIG_DEBUG_RODATA void mark_rodata_ro (void ) { -unsigned long addr = (unsigned long )__start_rodata; +unsigned long addr = (unsigned long )__va (__pa_symbol (&__start_rodata)); +unsigned long end = (unsigned long )__va (__pa_symbol (&__end_rodata)); -for (; addr < (unsigned long )__end_rodata; addr +=PAGE_SIZE ) +for (; addr < end; addr +=PAGE_SIZE )change_page_attr_addr (addr,1 ,PAGE_KERNEL_RO ); printk ("Write protecting the kernel read-only data: %luk\n",
@@ -615,7 +616,7 @@ void mark_rodata_ro(void)#ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem (unsigned long start,unsigned long end) { -free_init_pages ("initrd memory" , start, end); +free_init_pages ("initrd memory" ,__pa (start),__pa (end)); }#endif
arch/x86_64/mm/pageattr.c renamed from arch/x86_64/mm/pageattr.c~x86_64-__pa-and-__pa_symbol-address-space-separation +10 -7
@@ -51,7 +51,6 @@ static struct page *split_large_page(unsSetPagePrivate (base);page_private (base) =0 ; - address =__pa (address); addr = address &LARGE_PAGE_MASK ; pbase = (pte_t *)page_address (base);for (i =0 ; i <PTRS_PER_PTE ; i++, addr +=PAGE_SIZE ) {
@@ -95,7 +94,7 @@ static inline void save_page(struct page* No more special protections in this 2/4MB area - revert to a * large page again. */ -static void revert_page (unsigned long address,pgprot_t ref_prot) +static void revert_page (unsigned long address,unsigned long pfn,pgprot_t ref_prot) {pgd_t *pgd;pud_t *pud;
@@ -108,7 +107,8 @@ static void revert_page(unsigned long adBUG_ON (pud_none (*pud)); pmd =pmd_offset (pud, address);BUG_ON (pmd_val (*pmd) & _PAGE_PSE); - large_pte =mk_pte_phys (__pa (address) &LARGE_PAGE_MASK , ref_prot); + large_pte =mk_pte_phys ((pfn <<PAGE_SHIFT ) &LARGE_PAGE_MASK , + ref_prot); large_pte =pte_mkhuge (large_pte);set_pte ((pte_t *)pmd, large_pte); }
@@ -133,7 +133,8 @@ __change_page_attr(unsigned long address*/ struct page *split; ref_prot2 =pte_pgprot (pte_clrhuge (*kpte)); - split =split_large_page (address, prot, ref_prot2); + split =split_large_page (pfn <<PAGE_SHIFT , prot, + ref_prot2);if (!split)return -ENOMEM ;set_pte (kpte,mk_pte (split, ref_prot2));
@@ -152,7 +153,7 @@ __change_page_attr(unsigned long addressif (page_private (kpte_page) ==0 ) {save_page (kpte_page); -revert_page (address, ref_prot); +revert_page (address, pfn, ref_prot); }return 0 ; }
@@ -172,6 +173,7 @@ __change_page_attr(unsigned long address*/ int change_page_attr_addr (unsigned long address,int numpages,pgprot_t prot) { +unsigned long phys_base_pfn =__pa_symbol (__START_KERNEL_map) >>PAGE_SHIFT ;int err =0 ;int i;
@@ -184,10 +186,11 @@ int change_page_attr_addr(unsigned longbreak ;/* Handle kernel mapping too which aliases part of the * lowmem */ -if (__pa (address) <KERNEL_TEXT_SIZE ) { +if ((pfn >= phys_base_pfn) && + ((pfn - phys_base_pfn) < (KERNEL_TEXT_SIZE >>PAGE_SHIFT ))) {unsigned long addr2;pgprot_t prot2; - addr2 = __START_KERNEL_map +__pa (address); + addr2 = __START_KERNEL_map + ((pfn - phys_base_pfn) <<PAGE_SHIFT );/* Make sure the kernel mappings stay executable */ prot2 =pte_pgprot (pte_mkexec (pfn_pte (0 , prot))); err = __change_page_attr(addr2, pfn, prot2,
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-__pa-and-__pa_symbol-address-space-separation +2 -4
@@ -102,17 +102,15 @@ typedef struct { unsigned long pgprot; }/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol. Otherwise you risk miscompilation. */ -#define __pa (x) (((unsigned long)(x)>=__START_KERNEL_map)?(unsigned long)(x) - (unsigned long)__START_KERNEL_map:(unsigned long)(x) - PAGE_OFFSET) +#define __pa (x) ((unsigned long)(x) - PAGE_OFFSET)/* __pa_symbol should be used for C visible symbols. This seems to be the official gcc blessed way to do such arithmetic. */ #define __pa_symbol (x) \ ({unsigned long v; \ asm("" : "=r" (v) : "0" (x)); \ - __pa(v); }) + (v - __START_KERNEL_map); })#define __va (x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) -#define __boot_va (x) __va(x) -#define __boot_pa (x) __pa(x)#ifdef CONFIG_FLATMEM #define pfn_valid (pfn) ((pfn) < end_pfn)#endif
include/asm-x86_64/pgtable.h renamed from include/asm-x86_64/pgtable.h~x86_64-__pa-and-__pa_symbol-address-space-separation +2 -2
@@ -20,7 +20,7 @@ extern pmd_t level2_kernel_pgt[512];extern pgd_t init_level4_pgt[];extern unsigned long __supported_pte_mask; -#define swapper_pg_dir init_level4_pgt +#define swapper_pg_dir ((pgd_t *)NULL)extern void paging_init (void );extern void clear_kernel_mapping (unsigned long addr,unsigned long size);
@@ -30,7 +30,7 @@ extern void clear_kernel_mapping(unsigne* for zero-mapped memory areas etc.. */ extern unsigned long empty_zero_page[PAGE_SIZE /sizeof (unsigned long )]; -#define ZERO_PAGE (vaddr) (virt_to_page(empty_zero_page)) +#define ZERO_PAGE (vaddr) (pfn_to_page(__pa_symbol(&empty_zero_page) >> PAGE_SHIFT))#endif /* !__ASSEMBLY__ */
_
PATCH 17/20 x86_64: Remove CONFIG_PHYSICAL_START
In reply to Vivek GoyalI am about to add relocatable kernel support which has essentially no cost so there is no point in retaining CONFIG_PHYSICAL_START and retaining CONFIG_PHYSICAL_START makes implementation of and testing of a relocatable kernel more difficult.
---
arch/x86_64/Kconfig | 19 ------------------- arch/x86_64/boot/compressed/head.S | 6 +++--- arch/x86_64/boot/compressed/misc.c | 6 +++--- arch/x86_64/defconfig | 1 - arch/x86_64/kernel/vmlinux.lds.S | 2 +- arch/x86_64/mm/fault.c | 4 ++-- include/asm-x86_64/page.h | 2 -- 7 files changed, 9 insertions(+), 31 deletions(-)
arch/x86_64/boot/compressed/head.S renamed from arch/x86_64/boot/compressed/head.S~x86_64-Remove-CONFIG_PHYSICAL_START +3 -3
@@ -76,7 +76,7 @@ startup_32: jnz 3f addl $8,%esp xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START + ljmp $(__KERNEL_CS), $0x200000 /* * We come here, if we were loaded high.
@@ -102,7 +102,7 @@ startup_32: popl %ecx # lcount popl %edx # high_buffer_start popl %eax # hcount - movl $__PHYSICAL_START,%edi + movl $0x200000,%edi cli # make sure we don't get interrupted ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
@@ -127,7 +127,7 @@ move_routine_start: movsl movl %ebx,%esi # Restore setup pointer xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START + ljmp $(__KERNEL_CS), $0x200000 move_routine_end:
arch/x86_64/boot/compressed/misc.c renamed from arch/x86_64/boot/compressed/misc.c~x86_64-Remove-CONFIG_PHYSICAL_START +3 -3
@@ -288,7 +288,7 @@ static void setup_normal_output_buffer(v#else if ((RM_ALT_MEM_K >RM_EXT_MEM_K ?RM_ALT_MEM_K :RM_EXT_MEM_K ) <1024 )error ("Less than 2MB of memory" );#endif - output_data = (unsigned char *)__PHYSICAL_START;/* Normally Points to 1M */ + output_data = (unsigned char *)0x200000 ; free_mem_end_ptr = (long )real_mode; }
@@ -311,8 +311,8 @@ static void setup_output_buffer_if_we_ru low_buffer_size = low_buffer_end -LOW_BUFFER_START ; high_loaded =1 ; free_mem_end_ptr = (long )high_buffer_start; -if ( (__PHYSICAL_START + low_buffer_size) > ((ulg )high_buffer_start)) { - high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); +if ( (0x200000 + low_buffer_size) > ((ulg )high_buffer_start)) { + high_buffer_start = (uch *)(0x200000 + low_buffer_size); mv->hcount =0 ;/* say: we need not to move high_buffer */ }else mv->hcount =-1 ;
arch/x86_64/defconfig renamed from arch/x86_64/defconfig~x86_64-Remove-CONFIG_PHYSICAL_START +0 -1
@@ -165,7 +165,6 @@ CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set
arch/x86_64/Kconfig renamed from arch/x86_64/Kconfig~x86_64-Remove-CONFIG_PHYSICAL_START +0 -19
@@ -513,25 +513,6 @@ config CRASH_DUMP PHYSICAL_START. For more details see Documentation/kdump/kdump.txt -config PHYSICAL_START - hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x1000000" if CRASH_DUMP - default "0x200000" - help - This gives the physical address where the kernel is loaded. Normally - for regular kernels this value is 0x200000 (2MB). But in the case - of kexec on panic the fail safe kernel needs to run at a different - address than the panic-ed kernel. This option is used to set the load - address for kernels used to capture crash dump on being kexec'ed - after panic. The default value for crash dump kernels is - 0x1000000 (16MB). This can also be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. - - Don't change this unless you know what you are doing. - config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS
arch/x86_64/kernel/vmlinux.lds.S renamed from arch/x86_64/kernel/vmlinux.lds.S~x86_64-Remove-CONFIG_PHYSICAL_START +1 -1
@@ -22,7 +22,7 @@ PHDRS { } SECTIONS { - . = __START_KERNEL; + . = __START_KERNEL_map + 0x200000; phys_startup_64 = startup_64 - LOAD_OFFSET; _text = .; /* Text and read-only data */ .text : AT(ADDR(.text) - LOAD_OFFSET) {
arch/x86_64/mm/fault.c renamed from arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_START +2 -2
@@ -644,9 +644,9 @@ void vmalloc_sync_all(void) start = address +PGDIR_SIZE ; }/* Check that there is no need to do the same for the modules area. */ -BUILD_BUG_ON (!(MODULES_VADDR > __START_KERNEL)); +BUILD_BUG_ON (!(MODULES_VADDR > __START_KERNEL_map));BUILD_BUG_ON (!(((MODULES_END -1 ) &PGDIR_MASK ) == - (__START_KERNEL &PGDIR_MASK ))); + (__START_KERNEL_map &PGDIR_MASK ))); }static int __init enable_pagefaulttrace (char *str)
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START +0 -2
@@ -75,8 +75,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)#define __START_KERNEL_map _AC(0xffffffff80000000,UL)#define __PAGE_OFFSET _AC(0xffff810000000000,UL)
_
Re: [PATCH 17/20] x86_64: Remove CONFIG_PHYSICAL_START
Hi Vivek,
Sorry for not commenting on an earlier version.
Quoted 17 lines · Vivek Goyal
I am about to add relocatable kernel support which has essentially no cost so there is no point in retaining
CONFIG_PHYSICAL_STARTand retainingCONFIG_PHYSICAL_STARTmakes implementation of and testing of a relocatable kernel more difficult.Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>---
arch/x86_64/Kconfig | 19 ------------------- arch/x86_64/boot/compressed/head.S | 6 +++--- arch/x86_64/boot/compressed/misc.c | 6 +++--- arch/x86_64/defconfig | 1 - arch/x86_64/kernel/vmlinux.lds.S | 2 +- arch/x86_64/mm/fault.c | 4 ++-- include/asm-x86_64/page.h | 2 -- 7 files changed, 9 insertions(+), 31 deletions(-)
[snip]
arch/x86_64/mm/fault.c 2006-11-17 00:12:50.000000000 -0500 void vmalloc_sync_all(void) · line 650
Quoted 13 lines
diff -puN
arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_STARTarch/x86_64/mm/fault.carch/x86_64/mm/fault.c 2006-11-17 00:12:50.000000000 -0500 renamed from arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_START 2006-11-17 00:12:50.000000000 -0500 +2
-2@@ -644,9 +644,9 @@ void vmalloc_sync_all(void) start = address + PGDIR_SIZE; } /* Check that there is no need to do the same for the modules area. */ - BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL_map)); BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == - (__START_KERNEL & PGDIR_MASK))); + (__START_KERNEL_map & PGDIR_MASK))); }
This code looks either like a bugfix or a bug. If it's a fix then maybe it should be broken out and submitted separately for the rc-kernels?
include/asm-x86_64/page.h 2006-11-17 00:12:50.000000000 -0500 typedef struct { unsigned long pgprot; } · line 79
Quoted 11 lines
diff -puN
include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_STARTinclude/asm-x86_64/page.hinclude/asm-x86_64/page.h 2006-11-17 00:12:50.000000000 -0500 renamed from include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START 2006-11-17 00:12:50.000000000 -0500 +0
-2@@ -75,8 +75,6 @@ typedef struct { unsigned long pgprot; } #endif /* !__ASSEMBLY__ */ -#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) #define __START_KERNEL_map _AC(0xffffffff80000000,UL) #define __PAGE_OFFSET _AC(0xffff810000000000,UL)
I understand that you want to remove the Kconfig option CONFIG_PHYSICAL_START and that is fine with me. I don't however like the idea of replacing __PHYSICAL_START and __START_KERNEL with hardcoded values. Is there any special reason behind this?
The code in page.h already has constants for __START_KERNEL_map and __PAGE_OFFSET (thank god) and none of them are adjustable via Kconfig. Why not change as little as possible and keep __PHYSICAL_START and __START_KERNEL in page.h and the places that use them but remove references to CONFIG_PHYSICAL_START in Kconfig, defconfig, and page.h?
/ magnus
Re: [PATCH 17/20] x86_64: Remove CONFIG_PHYSICAL_START
Quoted 38 lines · Magnus Damm
Hi Vivek,
Sorry for not commenting on an earlier version.
Quoted 17 lines · Vivek Goyal
I am about to add relocatable kernel support which has essentially no cost so there is no point in retaining
CONFIG_PHYSICAL_STARTand retainingCONFIG_PHYSICAL_STARTmakes implementation of and testing of a relocatable kernel more difficult.Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>---
arch/x86_64/Kconfig | 19 ------------------- arch/x86_64/boot/compressed/head.S | 6 +++--- arch/x86_64/boot/compressed/misc.c | 6 +++--- arch/x86_64/defconfig | 1 - arch/x86_64/kernel/vmlinux.lds.S | 2 +- arch/x86_64/mm/fault.c | 4 ++-- include/asm-x86_64/page.h | 2 -- 7 files changed, 9 insertions(+), 31 deletions(-)[snip]
Quoted 13 lines
diff -puN
arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_STARTarch/x86_64/mm/fault.c
---
linux-2.6.19-rc6-reloc/arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_START 2006-11-17 00:12:50.000000000 -0500
+++linux-2.6.19-rc6-reloc-root/arch/x86_64/mm/fault.c2006-11-17 00:12:50.000000000 -0500(quoted diff) +1
-1@@ -644,9 +644,9 @@ void vmalloc_sync_all(void) start = address + PGDIR_SIZE; } /* Check that there is no need to do the same for the modules area. */ - BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL_map));
Quoted 9 lines
Review void vmalloc_sync_all(void) · line 651
Quoted 4 lines
(quoted diff) +1
-1BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == - (__START_KERNEL & PGDIR_MASK))); + (__START_KERNEL_map & PGDIR_MASK))); }This code looks either like a bugfix or a bug. If it's a fix then maybe it should be broken out and submitted separately for the rc-kernels?
Magnus, Eric got rid of __START_KERNEL because he was compiling kernel for physical addr zero which made __START_KERNEL and __START_KERNEL_map same, hence he got rid of __START_KERNEL. That's why above change.
But compiling for physical address zero has got drawback that one can not directly load a vmlinux as it shall have to be loaded at physical addr zero. Hence I changed the behavior back to compile the kernel for physical addr 2MB. So now __START_KERNEL = __START_KERNEL_map + 2MB.
Now it makes sense to retain __START_KERNEL. I have done the changes.
Quoted 10 lines
Quoted 10 lines
diff -puN
include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_STARTinclude/asm-x86_64/page.h
---
linux-2.6.19-rc6-reloc/include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START 2006-11-17 00:12:50.000000000 -0500
+++linux-2.6.19-rc6-reloc-root/include/asm-x86_64/page.h2006-11-17
00:12:50.000000000 -0500(quoted diff) +0
-0@@ -75,8 +75,6 @@ typedef struct { unsigned long pgprot; } #endif /* !__ASSEMBLY__ */
Quoted 10 lines
Review typedef struct { unsigned long pgprot; } · line 79
Quoted 4 lines
(quoted diff) +0
-2-#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) #define __START_KERNEL_map _AC(0xffffffff80000000,UL) #define __PAGE_OFFSET _AC(0xffff810000000000,UL)I understand that you want to remove the
KconfigoptionCONFIG_PHYSICAL_STARTand that is fine with me. I don't however like the idea of replacing__PHYSICAL_STARTand__START_KERNELwith hardcoded values. Is there any special reason behind this?
All the hardcodings for 2MB have disappeared in final version. See next patch in the series which actually implements relocatable kernel. Actually the whole logic itself has changed hence we did not require these hardcodings. This patch retains these hardcodings so that even if somebody removes the top patch, kernel can be compiled and booted.
So bottom line, all the hardcodings are not present once all the patches have been applied.
Quoted 5 lines
The code in
page.halready has constants for__START_KERNEL_mapand__PAGE_OFFSET(thank god) and none of them are adjustable viaKconfig. Why not change as little as possible and keep__PHYSICAL_STARTand__START_KERNELinpage.hand the places that use them but remove references toCONFIG_PHYSICAL_STARTinKconfig, defconfig, andpage.h?
Good suggestion. Now I have retained __START_KERNEL. But did not feel the need to retain __PHYSICAL_START. It will be used only at one place in page.h
Please find attached the regenerated patch.
Thanks
Vivek
I am about to add relocatable kernel support which has essentially no cost so there is no point in retaining CONFIG_PHYSICAL_START and retaining CONFIG_PHYSICAL_START makes implementation of and testing of a relocatable kernel more difficult.
---
arch/x86_64/Kconfig | 19 ------------------- arch/x86_64/boot/compressed/head.S | 6 +++--- arch/x86_64/boot/compressed/misc.c | 6 +++--- arch/x86_64/defconfig | 1 - include/asm-x86_64/page.h | 3 +-- 5 files changed, 7 insertions(+), 28 deletions(-)
arch/x86_64/boot/compressed/head.S renamed from arch/x86_64/boot/compressed/head.S~x86_64-Remove-CONFIG_PHYSICAL_START +3 -3
@@ -76,7 +76,7 @@ startup_32: jnz 3f addl $8,%esp xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START + ljmp $(__KERNEL_CS), $0x200000 /* * We come here, if we were loaded high.
@@ -102,7 +102,7 @@ startup_32: popl %ecx # lcount popl %edx # high_buffer_start popl %eax # hcount - movl $__PHYSICAL_START,%edi + movl $0x200000,%edi cli # make sure we don't get interrupted ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine
@@ -127,7 +127,7 @@ move_routine_start: movsl movl %ebx,%esi # Restore setup pointer xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START + ljmp $(__KERNEL_CS), $0x200000 move_routine_end:
arch/x86_64/boot/compressed/misc.c renamed from arch/x86_64/boot/compressed/misc.c~x86_64-Remove-CONFIG_PHYSICAL_START +3 -3
@@ -288,7 +288,7 @@ static void setup_normal_output_buffer(v#else if ((RM_ALT_MEM_K >RM_EXT_MEM_K ?RM_ALT_MEM_K :RM_EXT_MEM_K ) <1024 )error ("Less than 2MB of memory" );#endif - output_data = (unsigned char *)__PHYSICAL_START;/* Normally Points to 1M */ + output_data = (unsigned char *)0x200000 ; free_mem_end_ptr = (long )real_mode; }
@@ -311,8 +311,8 @@ static void setup_output_buffer_if_we_ru low_buffer_size = low_buffer_end -LOW_BUFFER_START ; high_loaded =1 ; free_mem_end_ptr = (long )high_buffer_start; -if ( (__PHYSICAL_START + low_buffer_size) > ((ulg )high_buffer_start)) { - high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); +if ( (0x200000 + low_buffer_size) > ((ulg )high_buffer_start)) { + high_buffer_start = (uch *)(0x200000 + low_buffer_size); mv->hcount =0 ;/* say: we need not to move high_buffer */ }else mv->hcount =-1 ;
arch/x86_64/defconfig renamed from arch/x86_64/defconfig~x86_64-Remove-CONFIG_PHYSICAL_START +0 -1
@@ -165,7 +165,6 @@ CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set
arch/x86_64/Kconfig renamed from arch/x86_64/Kconfig~x86_64-Remove-CONFIG_PHYSICAL_START +0 -19
@@ -513,25 +513,6 @@ config CRASH_DUMP PHYSICAL_START. For more details see Documentation/kdump/kdump.txt -config PHYSICAL_START - hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) - default "0x1000000" if CRASH_DUMP - default "0x200000" - help - This gives the physical address where the kernel is loaded. Normally - for regular kernels this value is 0x200000 (2MB). But in the case - of kexec on panic the fail safe kernel needs to run at a different - address than the panic-ed kernel. This option is used to set the load - address for kernels used to capture crash dump on being kexec'ed - after panic. The default value for crash dump kernels is - 0x1000000 (16MB). This can also be set based on the "X" value as - specified in the "crashkernel=YM@XM" command line boot parameter - passed to the panic-ed kernel. Typically this parameter is set as - crashkernel=64M@16M. Please take a look at - Documentation/kdump/kdump.txt for more details about crash dumps. - - Don't change this unless you know what you are doing. - config SECCOMP bool "Enable seccomp to safely compute untrusted bytecode" depends on PROC_FS
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START +1 -2
@@ -75,8 +75,7 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ -#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START) +#define __START_KERNEL (__START_KERNEL_map + 0x200000)#define __START_KERNEL_map _AC(0xffffffff80000000,UL)#define __PAGE_OFFSET _AC(0xffff810000000000,UL)
_
Re: [PATCH 17/20] x86_64: Remove CONFIG_PHYSICAL_START
Quoted 10 lines · Vivek Goyal
Quoted 9 lines · Magnus Damm
Quoted 8 lines · Vivek Goyal
I am about to add relocatable kernel support which has essentially no cost so there is no point in retaining
CONFIG_PHYSICAL_STARTand retainingCONFIG_PHYSICAL_STARTmakes implementation of and testing of a relocatable kernel more difficult.Signed-off-by Eric W. Biederman <[email protected]>Signed-off-by Vivek Goyal <[email protected]>---
[snip]
Quoted 1 line
linux-2.6.19-rc6-reloc/arch/x86_64/mm/fault.c~x86_64-Remove-CONFIG_PHYSICAL_START
2006-11-17 00:12:50.000000000 -0500
Quoted 23 lines
Quoted 9 lines
Quoted 9 lines
+++
linux-2.6.19-rc6-reloc-root/arch/x86_64/mm/fault.c2006-11-17 00:12:50.000000000 -0500(quoted diff) +1
-1@@ -644,9 +644,9 @@ void vmalloc_sync_all(void) start = address + PGDIR_SIZE; } /* Check that there is no need to do the same for the modules area. */ - BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); + BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL_map));Quoted 9 lines
Review void vmalloc_sync_all(void) · line 651
Quoted 4 lines
(quoted diff) +1
-1BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == - (__START_KERNEL & PGDIR_MASK))); + (__START_KERNEL_map & PGDIR_MASK))); }This code looks either like a bugfix or a bug. If it's a fix then maybe it should be broken out and submitted separately for the rc-kernels?
Magnus, Eric got rid of
__START_KERNELbecause he was compiling kernel for physical addr zero which made__START_KERNELand__START_KERNEL_mapsame, hence he got rid of__START_KERNEL. That's why above change.
Quoted 6 lines
But compiling for physical address zero has got drawback that one can not directly load a vmlinux as it shall have to be loaded at physical addr zero. Hence I changed the behavior back to compile the kernel for physical addr 2MB. So now
__START_KERNEL=__START_KERNEL_map+ 2MB.Now it makes sense to retain
__START_KERNEL. I have done the changes.
I misunderstood and thought __START_KERNEL was a physical address and __START_KERNEL_map was a virtual one. But now I understand. Thank you.
Quoted 22 lines
Quoted 11 lines
Quoted 11 lines
diff -puN
include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_STARTinclude/asm-x86_64/page.h
---
linux-2.6.19-rc6-reloc/include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START 2006-11-17 00:12:50.000000000 -0500
+++linux-2.6.19-rc6-reloc-root/include/asm-x86_64/page.h2006-11-17
00:12:50.000000000 -0500include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START +0
-0@@ -75,8 +75,6 @@ typedef struct { unsigned long pgprot; }#endif /* !__ASSEMBLY__ */ Quoted 10 lines
include/asm-x86_64/page.h typedef struct { unsigned long pgprot; } · line 80
Quoted 4 lines
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Remove-CONFIG_PHYSICAL_START +0
-2-#define __PHYSICAL_START _AC(CONFIG_PHYSICAL_START,UL) -#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)#define __START_KERNEL_map _AC(0xffffffff80000000,UL)#define __PAGE_OFFSET _AC(0xffff810000000000,UL)I understand that you want to remove the
KconfigoptionCONFIG_PHYSICAL_STARTand that is fine with me. I don't however like the idea of replacing__PHYSICAL_STARTand__START_KERNELwith hardcoded values. Is there any special reason behind this?
Quoted 8 lines
All the hardcodings for 2MB have disappeared in final version. See next patch in the series which actually implements relocatable kernel. Actually the whole logic itself has changed hence we did not require these hardcodings. This patch retains these hardcodings so that even if somebody removes the top patch, kernel can be compiled and booted.
So bottom line, all the hardcodings are not present once all the patches have been applied.
My gut feeling said a big no when I saw that you replaced constants with hardcoded values. But if the hardcoded values disappear when all patches are applied then I'm happy!
Quoted 9 lines
Quoted 5 lines
The code in
page.halready has constants for__START_KERNEL_mapand__PAGE_OFFSET(thank god) and none of them are adjustable viaKconfig. Why not change as little as possible and keep__PHYSICAL_STARTand__START_KERNELinpage.hand the places that use them but remove references toCONFIG_PHYSICAL_STARTinKconfig, defconfig, andpage.h?Good suggestion. Now I have retained
__START_KERNEL. But did not feel the need to retain__PHYSICAL_START. It will be used only at one place inpage.h
Just to nitpick, isn't the 2M value used both in page.h and head.S? I don't fully understand the reason why you are hardcoding, but it is not that important. I think this version of the patch is much better. Thank you!
/ magnus
PATCH 18/20 x86_64: Relocatable kernel support
In reply to Vivek GoyalThis patch modifies the x86_64 kernel so that it can be loaded and run at any 2M aligned address, below 512G. The technique used is to compile the decompressor with -fPIC and modify it so the decompressor is fully relocatable. For the main kernel the page tables are modified so the kernel remains at the same virtual address. In addition a variable phys_base is kept that holds the physical address the kernel is loaded at. __pa_symbol is modified to add that when we take the address of a kernel symbol.
When loaded with a normal bootloader the decompressor will decompress the kernel to 2M and it will run there. This both ensures the relocation code is always working, and makes it easier to use 2M pages for the kernel and the cpu.
---
arch/x86_64/boot/compressed/Makefile | 12 - arch/x86_64/boot/compressed/head.S | 311 ++++++++++++++++++++++---------- arch/x86_64/boot/compressed/misc.c | 251 +++++++++++++------------ arch/x86_64/boot/compressed/vmlinux.lds | 44 ++++ arch/x86_64/boot/compressed/vmlinux.scr | 5 arch/x86_64/kernel/head.S | 221 ++++++++++++---------- include/asm-x86_64/page.h | 6 7 files changed, 532 insertions(+), 318 deletions(-)
arch/x86_64/boot/compressed/head.S renamed from arch/x86_64/boot/compressed/head.S~x86_64-Relocatable-kernel-support +220 -91
@@ -26,116 +26,245 @@ #include <linux/linkage.h> #include <asm/segment.h> +#include <asm/pgtable.h> #include <asm/page.h> +#include <asm/msr.h> +.section ".text.head" .code32 .globl startup_32 startup_32: cld cli - movl $(__KERNEL_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - - lss stack_start,%esp - xorl %eax,%eax -1: incl %eax # check that A20 really IS enabled - movl %eax,0x000000 # loop forever if it isn't - cmpl %eax,0x100000 - je 1b - -/* - * Initialize eflags. Some BIOS's leave bits like NT set. This would - * confuse the debugger if this code is traced. - * XXX - best to initialize before switching to protected mode. + movl $(__KERNEL_DS), %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + +/* Calculate the delta between where we were compiled to run + * at and where we were actually loaded at. This can only be done + * with a short local call on x86. Nothing else will tell us what + * address we are running at. The reserved chunk of the real-mode + * data at 0x34-0x3f are used as the stack for this calculation. + * Only 4 bytes are needed. */ - pushl $0 - popfl + leal 0x40(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp + +/* Compute the delta between where we were compiled to run at + * and where the code will actually run at. + */ + movl %ebp, %ebx + addl $(LARGE_PAGE_SIZE -1), %ebx + andl $LARGE_PAGE_MASK, %ebx + + /* Replace the compressed data size with the uncompressed size */ + subl input_len(%ebp), %ebx + movl output_len(%ebp), %eax + addl %eax, %ebx + /* Add 8 bytes for every 32K input block */ + shrl $12, %eax + addl %eax, %ebx + /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ + addl $(32768 + 18 + 4095), %ebx + andl $~4095, %ebx + +/* + * Prepare for entering 64 bit mode + */ + + /* Load new GDT with the 64bit segments using 32bit descriptor */ + leal gdt(%ebp), %eax + movl %eax, gdt+2(%ebp) + lgdt gdt(%ebp) + + /* Enable PAE mode */ + xorl %eax, %eax + orl $(1 << 5), %eax + movl %eax, %cr4 + +/* + * Build early 4G boot pagetable + */ + /* Initialize Page tables to 0*/ + leal pgtable(%ebx), %edi + xorl %eax, %eax + movl $((4096*6)/4), %ecx + rep stosl + + /* Build Level 4 */ + leal pgtable + 0(%ebx), %edi + leal 0x1007 (%edi), %eax + movl %eax, 0(%edi) + + /* Build Level 3 */ + leal pgtable + 0x1000(%ebx), %edi + leal 0x1007(%edi), %eax + movl $4, %ecx +1: movl %eax, 0x00(%edi) + addl $0x00001000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Build Level 2 */ + leal pgtable + 0x2000(%ebx), %edi + movl $0x00000183, %eax + movl $2048, %ecx +1: movl %eax, 0(%edi) + addl $0x00200000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Enable the boot page tables */ + leal pgtable(%ebx), %eax + movl %eax, %cr3 + + /* Enable Long mode in EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* Setup for the jump to 64bit mode + * + * When the jump is performend we will be in long mode but + * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 + * (and in turn EFER.LMA = 1). To jump into 64bit mode we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + * We place all of the values on our mini stack so lret can + * used to perform that far jump. + */ + pushl $__KERNEL_CS + leal startup_64(%ebp), %eax + pushl %eax + + /* Enter paged protected Mode, activating Long Mode */ + movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl %eax, %cr0 + + /* Jump from 32bit compatibility mode into 64bit mode. */ + lret + + /* Be careful here startup_64 needs to be at a predictable + * address so I can export it in an ELF header. Bootloaders + * should look at the ELF header to find this address, as + * it may change in the future. + */ + .code64 + .org 0x100 +ENTRY(startup_64) + /* We come here either from startup_32 or directly from a + * 64bit bootloader. If we come here from a bootloader we depend on + * an identity mapped page table being provied that maps our + * entire text+data+bss and hopefully all of memory. + */ + + /* Setup data segments. */ + xorl %eax, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + + /* Compute the decompressed kernel start address. It is where + * we were loaded at aligned to a 2M boundary. + */ + leaq startup_32(%rip) /* - $startup_32 */, %rbp + addq $(LARGE_PAGE_SIZE - 1), %rbp + andq $LARGE_PAGE_MASK, %rbp + +/* Compute the delta between where we were compiled to run at + * and where the code will actually run at. + */ + /* Start with the delta to where the kernel will run at. */ + movq %rbp, %rbx + + /* Replace the compressed data size with the uncompressed size */ + movl input_len(%rip), %eax + subq %rax, %rbx + movl output_len(%rip), %eax + addq %rax, %rbx + /* Add 8 bytes for every 32K input block */ + shrq $12, %rax + addq %rax, %rbx + /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ + addq $(32768 + 18 + 4095), %rbx + andq $~4095, %rbx + +/* Copy the compressed kernel to the end of our buffer + * where decompression in place becomes safe. + */ + leaq _end(%rip), %r8 + leaq _end(%rbx), %r9 + movq $_end /* - $startup_32 */, %rcx +1: subq $8, %r8 + subq $8, %r9 + movq 0(%r8), %rax + movq %rax, 0(%r9) + subq $8, %rcx + jnz 1b + +/* + * Jump to the relocated address. + */ + leaq relocated(%rbx), %rax + jmp *%rax + +.section ".text" +relocated: + /* * Clear BSS */ - xorl %eax,%eax - movl $_edata,%edi - movl $_end,%ecx - subl %edi,%ecx + xorq %rax, %rax + leaq _edata(%rbx), %rdi + leaq _end(%rbx), %rcx + subq %rdi, %rcx cld rep stosb + + /* Setup the stack */ + leaq user_stack_end(%rip), %rsp + + /* zero EFLAGS after setting rsp */ + pushq $0 + popfq + /* * Do the decompression, and jump to the new kernel.. */ - subl $16,%esp # place for structure on the stack - movl %esp,%eax - pushl %esi # real mode pointer as second arg - pushl %eax # address of structure as first arg - call decompress_kernel - orl %eax,%eax - jnz 3f - addl $8,%esp - xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $0x200000 - -/* - * We come here, if we were loaded high. - * We need to move the move-in-place routine down to 0x1000 - * and then start it with the buffer addresses in registers, - * which we got from the stack. - */ -3: - movl %esi,%ebx - movl $move_routine_start,%esi - movl $0x1000,%edi - movl $move_routine_end,%ecx - subl %esi,%ecx - addl $3,%ecx - shrl $2,%ecx - cld - rep - movsl - - popl %esi # discard the address - addl $4,%esp # real mode pointer - popl %esi # low_buffer_start - popl %ecx # lcount - popl %edx # high_buffer_start - popl %eax # hcount - movl $0x200000,%edi - cli # make sure we don't get interrupted - ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine - -/* - * Routine (template) for moving the decompressed kernel in place, - * if we were high loaded. This _must_ PIC-code ! - */ -move_routine_start: - movl %ecx,%ebp - shrl $2,%ecx - rep - movsl - movl %ebp,%ecx - andl $3,%ecx - rep - movsb - movl %edx,%esi - movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0 - addl $3,%ecx - shrl $2,%ecx - rep - movsl - movl %ebx,%esi # Restore setup pointer - xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $0x200000 -move_routine_end: + pushq %rsi # Save the real mode argument + movq %rsi, %rdi # real mode address + leaq _heap(%rip), %rsi # _heap + leaq input_data(%rip), %rdx # input_data + movl input_len(%rip), %eax + movq %rax, %rcx # input_len + movq %rbp, %r8 # output + call decompress_kernel + popq %rsi +/* + * Jump to the decompressed kernel. + */ + jmp *%rbp -/* Stack for uncompression */ - .align 32 + .data +gdt: + .word gdt_end - gdt + .long gdt + .word 0 + .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00af9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ +gdt_end: + .bss +/* Stack for uncompression */ + .balign 4 user_stack: .fill 4096,4,0 -stack_start: - .long user_stack+4096 - .word __KERNEL_DS - +user_stack_end:
arch/x86_64/boot/compressed/Makefile renamed from arch/x86_64/boot/compressed/Makefile~x86_64-Relocatable-kernel-support +5 -7
@@ -8,16 +8,14 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o EXTRA_AFLAGS := -traditional -AFLAGS := $(subst -m64,-m32,$(AFLAGS)) # cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with # -m32 -CFLAGS := -m32 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -LDFLAGS := -m elf_i386 +CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin +LDFLAGS := -m elf_x86_64 -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 -m elf_i386 - -$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE +LDFLAGS_vmlinux := -T +$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @:
@@ -27,7 +25,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T +LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE $(call if_changed,ld)
arch/x86_64/boot/compressed/misc.c renamed from arch/x86_64/boot/compressed/misc.c~x86_64-Relocatable-kernel-support +132 -119
310 lines not on this page · raw message
arch/x86_64/boot/compressed/vmlinux.lds new file +44 -0
44 lines not on this page · raw message
arch/x86_64/boot/compressed/vmlinux.scr renamed from arch/x86_64/boot/compressed/vmlinux.scr~x86_64-Relocatable-kernel-support +3 -2
@@ -1,9 +1,10 @@ SECTIONS { - .data : { + .text.compressed : { input_len = .; LONG(input_data_end - input_data) input_data = .; - *(.data) + *(.data) + output_len = . - 4; input_data_end = .; } }
arch/x86_64/kernel/head.S renamed from arch/x86_64/kernel/head.S~x86_64-Relocatable-kernel-support +124 -97
297 lines not on this page · raw message
include/asm-x86_64/page.h renamed from include/asm-x86_64/page.h~x86_64-Relocatable-kernel-support +4 -2
@@ -61,6 +61,8 @@ typedef struct { unsigned long pgd; } pgtypedef struct {unsigned long pgprot; }pgprot_t ; +extern unsigned long phys_base; +#define pte_val (x) ((x).pte)#define pmd_val (x) ((x).pmd)#define pud_val (x) ((x).pud)
@@ -99,14 +101,14 @@ typedef struct { unsigned long pgprot; }#define PAGE_OFFSET __PAGE_OFFSET/* Note: __pa(&symbol_visible_to_c) should be always replaced with __pa_symbol. -Otherwise you risk miscompilation. */ +Otherwise you risk miscompilation. */ #define __pa (x) ((unsigned long)(x) - PAGE_OFFSET)/* __pa_symbol should be used for C visible symbols. This seems to be the official gcc blessed way to do such arithmetic. */ #define __pa_symbol (x) \ ({unsigned long v; \ asm("" : "=r" (v) : "0" (x)); \ - (v - __START_KERNEL_map); }) + ((v - __START_KERNEL_map) + phys_base); })#define __va (x) ((void *)((unsigned long)(x)+PAGE_OFFSET))#ifdef CONFIG_FLATMEM
_
Re: [PATCH 18/20] x86_64: Relocatable kernel support
On 2006-11-17, Vivek Goyal wrote:
[]
arch/x86_64/boot/compressed/misc.c static void error(char *x) · line 336
Quoted 4 lines
static void
error(char *x)arch/x86_64/boot/compressed/misc.c renamed from arch/x86_64/boot/compressed/misc.c~x86_64-Relocatable-kernel-support +0
-0@@ -281,57 +335,8 @@ static void error(char *x)while (1 );/* Halt */ }
Is it possible to make this optional (using "panic" reboot timeout)?
____
Re: [PATCH 18/20] x86_64: Relocatable kernel support
Quoted 9 lines · Oleg Verych
On 2006-11-17, Vivek Goyal wrote:
[]arch/x86_64/boot/compressed/misc.c static void error(char *x) · line 336
Quoted 4 lines
static void
error(char *x)arch/x86_64/boot/compressed/misc.c renamed from arch/x86_64/boot/compressed/misc.c~x86_64-Relocatable-kernel-support +0
-0@@ -281,57 +335,8 @@ static void error(char *x)while (1 );/* Halt */ }Is it possible to make this optional (using "panic" reboot timeout)?
There is no command line parsing at this point. I guess it would be possible to implement, but some work. Do you want to submit a patch ?
-Andi
PATCH 19/20 x86_64: Extend bzImage protocol for relocatable kernel
In reply to Vivek Goyalo Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses.
o As of today kdump uses it to run a second kernel from a reserved memory area.
---
arch/x86_64/boot/setup.S | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
arch/x86_64/boot/setup.S renamed from arch/x86_64/boot/setup.S~x86_64-extend-bzImage-protocol-for-relocatable-bzImage +7 -2
@@ -80,7 +80,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0204 # header version number (>= 0x0105) + .word 0x0205 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG
@@ -155,7 +155,12 @@ cmd_line_ptr: .long 0 # (Header versio # low memory 0x10000 or higher. ramdisk_max: .long 0xffffffff - +kernel_alignment: .long 0x200000 # physical addr alignment required for + # protected mode relocatable kernel +relocatable_kernel: .byte 1 +pad2: .byte 0 +pad3: .word 0 + trampoline: call start_of_setup .align 16 # The offset at this point is 0x240
_
Re: [PATCH 19/20] x86_64: Extend bzImage protocol for relocatable kernel
Quoted 9 lines · Vivek Goyal
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses.
o As of today kdump uses it to run a second kernel from a reserved memory area.
Signed-off-by Vivek Goyal <[email protected]>
Do you have a patch for Documentation/i386/boot.txt as well?
-hpa
Re: [PATCH 19/20] x86_64: Extend bzImage protocol for relocatable kernel
Quoted 6 lines · H. Peter Anvin
Quoted 5 lines · Vivek Goyal
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses.
Quoted 7 lines
Quoted 4 lines
o As of today kdump uses it to run a second kernel from a reserved memory area.
Signed-off-by Vivek Goyal <[email protected]>Do you have a patch for
Documentation/i386/boot.txtas well?
Yes. As documentation is shared between i386 and x86_64, It is already there in Andi's tree and in -mm. I had pushed that with i386 relocatable bzImage changes.
Thanks
Vivek
Re: [PATCH 19/20] x86_64: Extend bzImage protocol for relocatable kernel
Quoted 10 lines · Vivek Goyal
Quoted 9 lines · H. Peter Anvin
Quoted 8 lines · Vivek Goyal
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses.
o As of today kdump uses it to run a second kernel from a reserved memory area.
Signed-off-by Vivek Goyal <[email protected]>
Quoted 9 lines
Quoted 2 lines
Do you have a patch for
Documentation/i386/boot.txtas well?Yes. As documentation is shared between i386 and
x86_64, It is already there in Andi's tree and in -mm. I had pushed that with i386 relocatable bzImage changes.
Your documentation change is buggy.
The fields at 0230/4 and 0234/1 are 2.05+ not 2.04+
Please fix, also please update the last revision date.
-hpa
Re: [PATCH 19/20] x86_64: Extend bzImage protocol for relocatable kernel
Quoted 19 lines · H. Peter Anvin
Quoted 18 lines · Vivek Goyal
Quoted 11 lines · H. Peter Anvin
Quoted 8 lines · Vivek Goyal
o Extend the bzImage protocol (same as i386) to allow bzImage loaders to load the protected mode kernel at non-1MB address. Now protected mode component is relocatable and can be loaded at non-1MB addresses.
o As of today kdump uses it to run a second kernel from a reserved memory area.
Signed-off-by Vivek Goyal <[email protected]>Do you have a patch for
Documentation/i386/boot.txtas well?Yes. As documentation is shared between i386 and
x86_64, It is already there
in Andi's tree and in -mm. I had pushed that with i386 relocatable bzImage changes.
Quoted 8 lines
Your documentation change is buggy.
The fields at 0230/4 and 0234/1 are 2.05+ not 2.04+
Please fix, also please update the last revision date.
Thanks for noticing this. Just now sent a patch in separate thread to fix this.
Thanks
Vivek
PATCH 20/20 x86_64: Move CPU verification code to common file
In reply to Vivek Goyalo This patch moves the code to verify long mode and SSE to a common file. This code is not shared by trampoline.S, wakeup.S, boot/setup.S and boot/compressed/head.S
o So far we used to do very limited check in trampoline.S, wakeup.S and in 32bit entry point. Now all the entry paths are forced to do the exhaustive check, including SSE because verify_cpu is shared.
o I am keeping this patch as last in the x86 relocatable series because previous patches have got quite some amount of testing done and don't want to distrub that. So that if there is problem introduced by this patch, at least it can be easily isolated.
---
arch/x86_64/boot/compressed/head.S | 19 ++++++ arch/x86_64/boot/setup.S | 65 ++-------------------- arch/x86_64/kernel/acpi/wakeup.S | 30 +++++----- arch/x86_64/kernel/trampoline.S | 51 +---------------- arch/x86_64/kernel/verify_cpu.S | 106 +++++++++++++++++++++++++++++++++++++ 5 files changed, 148 insertions(+), 123 deletions(-)
arch/x86_64/boot/compressed/head.S renamed from arch/x86_64/boot/compressed/head.S~x86_64-move-cpu-verfication-code-to-common-file +18 -1
@@ -54,6 +54,15 @@ startup_32: 1: popl %ebp subl $1b, %ebp +/* setup a stack and make sure cpu supports long mode. */ + movl $user_stack_end, %eax + addl %ebp, %eax + movl %eax, %esp + + call verify_cpu + testl %eax, %eax + jnz no_longmode + /* Compute the delta between where we were compiled to run at * and where the code will actually run at. */
@@ -150,13 +159,21 @@ startup_32: /* Jump from 32bit compatibility mode into 64bit mode. */ lret +no_longmode: + /* This isn't an x86-64 CPU so hang */ +1: + hlt + jmp 1b + +#include "../../kernel/verify_cpu.S" + /* Be careful here startup_64 needs to be at a predictable * address so I can export it in an ELF header. Bootloaders * should look at the ELF header to find this address, as * it may change in the future. */ .code64 - .org 0x100 + .org 0x200 ENTRY(startup_64) /* We come here either from startup_32 or directly from a * 64bit bootloader. If we come here from a bootloader we depend on
arch/x86_64/boot/setup.S renamed from arch/x86_64/boot/setup.S~x86_64-move-cpu-verfication-code-to-common-file +6 -59
77 lines not on this page · raw message
arch/x86_64/kernel/acpi/wakeup.S renamed from arch/x86_64/kernel/acpi/wakeup.S~x86_64-move-cpu-verfication-code-to-common-file +15 -15
@@ -43,6 +43,11 @@ wakeup_code: cmpl $0x12345678, %eax jne bogus_real_magic + call verify_cpu # Verify the cpu supports long + # mode + testl %eax, %eax + jnz no_longmode + testl $1, video_flags - wakeup_code jz 1f lcall $0xc000,$3
@@ -92,18 +97,6 @@ wakeup_32: # Running in this code, but at low address; paging is not yet turned on. movb $0xa5, %al ; outb %al, $0x80 - /* Check if extended functions are implemented */ - movl $0x80000000, %eax - cpuid - cmpl $0x80000000, %eax - jbe bogus_cpu - wbinvd - mov $0x80000001, %eax - cpuid - btl $29, %edx - jnc bogus_cpu - movl %edx,%edi - movl $__KERNEL_DS, %eax movl %eax, %ds
@@ -123,6 +116,11 @@ wakeup_32: leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax movl %eax, %cr3 + /* Check if nx is implemented */ + movl $0x80000001, %eax + cpuid + movl %edx,%edi + /* Enable Long Mode */ xorl %eax, %eax btsl $_EFER_LME, %eax
@@ -243,10 +241,12 @@ bogus_64_magic: movb $0xb3,%al ; outb %al,$0x80 jmp bogus_64_magic -bogus_cpu: - movb $0xbc,%al ; outb %al,$0x80 - jmp bogus_cpu +.code16 +no_longmode: + movb $0xbc,%al ; outb %al,$0x80 + jmp no_longmode +#include "../verify_cpu.S" /* This code uses an extended set of video mode numbers. These include: * Aliases for standard modes
arch/x86_64/kernel/trampoline.S renamed from arch/x86_64/kernel/trampoline.S~x86_64-move-cpu-verfication-code-to-common-file +3 -48
66 lines not on this page · raw message
arch/x86_64/kernel/verify_cpu.S new file +106 -0
106 lines not on this page · raw message
_
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Hallo.
On 2006-11-17, Vivek Goyal wrote:
[]
arch/x86_64/boot/compressed/head.S startup_32: · line 169
Quoted 8 lines
arch/x86_64/boot/compressed/head.S renamed from arch/x86_64/boot/compressed/head.S~x86_64-move-cpu-verfication-code-to-common-file +8
-0+no_longmode: + /* This isn't an x86-64 CPU so hang */ +1: + hlt + jmp 1b + +#include "../../kernel/verify_cpu.S" +
May hang be done optional? There was a discussion about applying "panic" reboot timeout here. Is it possible to implement somehow?
[]
arch/x86_64/kernel/verify_cpu.S line 5
Quoted 9 lines
diff -puN
/dev/nullarch/x86_64/kernel/verify_cpu.Sarch/x86_64/kernel/verify_cpu.S new file +5
-0@@ -0,0 +1,106 @@ +/* + * + * verify_cpu.S - Code for cpu long mode and SSE verification + * + * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
^^^^
Warning: File verify_cpu.S has modification time in the future... (preliminary shoot (in the head ;))
[]
arch/x86_64/kernel/verify_cpu.S line 36
Quoted 8 lines
arch/x86_64/kernel/verify_cpu.S new file +8
-0+verify_cpu: + + pushfl # Save caller passed flags + pushl $0 # Kill any dangerous flags + popfl + + /* minimum CPUID flags for x86-64 */ + /* see http://www.x86-64.org/lists/discuss/msg02971.html */
Maybe there's a place for this in Documentation/ ?
arch/x86_64/kernel/verify_cpu.S line 39
Quoted 3 lines
arch/x86_64/kernel/verify_cpu.S new file +3
-0+#define SSE_MASK ((1<<25)|(1<<26)) +#define REQUIRED_MASK1 ((1<<0)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<8)|\ + (1<<13)|(1<<15)|(1<<24))
Maybe there is a more readable way to setup this mask?
____
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 2 lines
May hang be done optional? There was a discussion about applying "panic" reboot timeout here. Is it possible to implement somehow?
It would be tricky, but might be possible. But that would be a completely new feature -- the kernel has always hung in this case. If you think you need it submit a (followup) patch. But I don't think it's fair to ask Vivek to do it.
Besides i don't think it would be any useful. panic reboot only makes sense if you can recover after reboot. But if your CPU somehow suddenly loses its ability to run 64bit code, no reboot of the world will recover.
-Andi
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 10 lines · Andi Kleen
Quoted 2 lines
May hang be done optional? There was a discussion about applying "panic" reboot timeout here. Is it possible to implement somehow?
It would be tricky, but might be possible. But that would be a completely
new feature -- the kernel has always hung in this case. If you think you need it submit a (followup) patch. But I don't think it's fair to ask Vivek to do it.Besides i don't think it would be any useful. panic reboot only
makes sense if you can recover after reboot. But if your CPU somehow suddenly loses its ability to run 64bit code, no reboot of the world will recover.
Not true. Some bootloaders support a fallback kernel. This case is particular important if one accidentally installs the wrong kernel for the machine.
-hpa
A message that is not in the archive (sent off-list or not yet received): [email protected]
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 6 lines · Oleg Verych
It will burn CPU, until power cycle will be done (my AMD64 laptop and Intel's amd64 destop PC require that). In case of reboot timeout (or just reboot with jump to BIOS), i will just choose another image to boot or will press F8 to have another boot device.
That's a fairly stupid argument, since it assumes operator intervention, at which point you have access to the machine anyway.
A stronger argument is, again, that some bootloaders can do unattended fallback.
However, this test should probably be pushed earlier, into setup.S, where executing a BIOS-clean reboot is much easier.
-hpa
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 10 lines · H. Peter Anvin
Quoted 6 lines · Oleg Verych
It will burn CPU, until power cycle will be done (my AMD64 laptop and Intel's amd64 destop PC require that). In case of reboot timeout (or just reboot with jump to BIOS), i will just choose another image to boot or will press F8 to have another boot device.
That's a fairly stupid argument, since it assumes operator intervention, at which point you have access to the machine anyway.
I would never call *power cycle* stupid, just because from physics point of veiw.
Example. I have my flower.upol.cz many kilometers far away from me. I used to boot it from that flash (new hardware, sata problems, etc).
When something goes wrong with rc kernel or power source, bum. And i had to move my ass there, just to press reset. Because.
While i have "power on, on AC failures" in BIOS, *sometimes* flash will not boot (i don't know why, maybe it's GRUB+flash-read, or BIOS usb hdd implementation specific).
DTR laptop ~33% doesn't boot that flash. And laptop has no reset button. Operator is present, so your consern is right here.
Quoted 2 lines
A stronger argument is, again, that some bootloaders can do unattended fallback.
____
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 9 lines · Oleg Verych
Quoted 7 lines · H. Peter Anvin
Quoted 5 lines · Oleg Verych
It will burn CPU, until power cycle will be done (my AMD64 laptop and Intel's amd64 destop PC require that). In case of reboot timeout (or just reboot with jump to BIOS), i will just choose another image to boot or will press F8 to have another boot device.
That's a fairly stupid argument, since it assumes operator intervention, at which point you have access to the machine anyway.
Quoted 8 lines
I would never call *power cycle* stupid, just because from physics point of veiw.
Example. I have my flower.upol.cz many kilometers far away from me. I used to boot it from that flash (new hardware, sata problems, etc).
When something goes wrong with rc kernel or power source, bum. And i had to move my ass there, just to press reset. Because.
Yes, and you would have to do that to press F8 too.
Quoted 3 lines
While i have "power on, on AC failures" in BIOS, *sometimes* flash will not boot (i don't know why, maybe it's GRUB+flash-read, or BIOS usb hdd implementation specific).
I was making the point that there is unattended recovery possible. That makes it a significant argument. That a user on a laptop has to wait four seconds pushing the power button is not.
-hpa
reboot, not loop forever (Re: [PATCH 20/20] x86_64: Move CPU verification code to common file)
Quoted 14 lines · H. Peter Anvin
Quoted 13 lines · Oleg Verych
Quoted 8 lines · H. Peter Anvin
Quoted 5 lines · Oleg Verych
It will burn CPU, until power cycle will be done (my AMD64 laptop and Intel's amd64 destop PC require that). In case of reboot timeout (or just reboot with jump to BIOS), i will just choose another image to boot or will press F8 to have another boot device.
That's a fairly stupid argument, since it assumes operator intervention, at which point you have access to the machine anyway.
I would never call *power cycle* stupid, just because from physics point of veiw.
Quoted 7 lines
Quoted 5 lines
Example. I have my flower.upol.cz many kilometers far away from me. I used to boot it from that flash (new hardware, sata problems, etc).
When something goes wrong with rc kernel or power source, bum. And i had to move my ass there, just to press reset. Because.
Yes, and you would have to do that to press F8 too.
That peace of code used in many places, thus, i've mentioned F8, if wrong kernel on wrong computer was launched.
Quoted 7 lines
Quoted 3 lines
While i have "power on, on AC failures" in BIOS, *sometimes* flash will not boot (i don't know why, maybe it's GRUB+flash-read, or BIOS usb hdd implementation specific).
I was making the point that there is unattended recovery possible. That makes it a significant argument. That a user on a laptop has to wait four seconds pushing the power button is not.
As additional note to Andi and many of you, who will say, that it's a couple of asm instructions, just send patch.
I'm see many kinds of reboot functions in include/linux/reboot.h. There even reboot_fixup.h. Some of them may be copy/pasted in place of that while(1) loop, who knows which exactly? What problems it may cause?
I used to write PC bootloaders with tasm, when i was a child (10 years ago). Nothing major, ok with that.
But i bet, i will spot whitespace and tabification issues in files, i will visit with emacs and eventually making patches with that. First ever try with top Makefile failed, this makefile have something after tabification, that Andrew Morton's makefile (from FC5) doesn't like. Funny. Don't call me bureaucrat, but this is (my) mater of *not* being kind of dumb.
Quoted 1 line
-hpa
Thanks.
--
-o--=O`C info emacs : not found /. .\ (is there any reason to live?) #oo'L O info make : not found o ( R.I.P ) <___=E M man gcc : not found .-- ( Debian Operating System )
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
In reply to H. Peter AnvinQuoted 3 lines
However, this test should probably be pushed earlier, into
setup.S, where executing a BIOS-clean reboot is much easier.
It's already in there in fact. It wasn't originally, until we discovered that there is no way to output a message in head.S when you're using vesafb. The only way to give a visible error is to do it before the video switched.
The old test was kept, although it's redundant.
This means Vivek/Eric added it now to the SMP trampoline and ACPI S3 resume too, but there it is technically redundant too.
But you have to spin, otherwise the user cannot see what is wrong (and that is much more important than your obscure possibility of automatic fallback -- inserting the wrong CD is pretty common)
Finding panic=.. would require writing a command line parser in 16bit assembly. I have my doubts that's a good use of anyone's time.
-Andi (who wonders why he wastes so much time writing about this thing)
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 4 lines · Andi Kleen
Finding panic=.. would require writing a command line parser in 16bit assembly. I have my doubts that's a good use of anyone's time.
There already is one, in the EDD code.
-hpa
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
In reply to Vivek GoyalQuoted 1 line · Vivek Goyal
+ * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
Normally it's not ok to take sole copyright on code that you mostly copied ...
-Andi
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 5 lines · Andi Kleen
Quoted 1 line · Vivek Goyal
+ * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
Normally it's not ok to take sole copyright on code that you mostly copied ...
Is this a case where the original had no copyright notice? If so, what do you suggest Vivek should have done?
Paul.
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 10 lines · Paul Mackerras
Quoted 5 lines · Andi Kleen
Quoted 1 line · Vivek Goyal
+ * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
Normally it's not ok to take sole copyright on code that you mostly copied ...
Is this a case where the original had no copyright notice? If so, what do you suggest Vivek should have done?
The head.S code this was copied from definitely had a copyright.
-Andi
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Quoted 5 lines · Andi Kleen
Quoted 4 lines · Paul Mackerras
Quoted 2 lines · Andi Kleen
On Friday 17 November 2006 23:59, Vivek Goyal wrote:
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
+ * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
Normally it's not ok to take sole copyright on code that you mostly copied ...
Is this a case where the original had no copyright notice? If so, what do you suggest Vivek should have done?
The
head.Scode this was copied from definitely had a copyright.
I am sorry but I am completely unaware of the details of Copyright information. Somebody please tell me what should be the right info here given that basically I have taken the code from arch/x86_64/boot/head.S, picked modifications done by Eric and minor changes of my own.
Do I copy here all the copyright info of head.S and then add Eric's name and mine too?
Thanks
Vivek
Re: [PATCH 20/20] x86_64: Move CPU verification code to common file
Hi!
Quoted 10 lines
Quoted 9 lines
Quoted 6 lines
Quoted 3 lines
Quoted 1 line
+ * Copyright (c) 2006-2007 Vivek Goyal ([email protected])
Normally it's not ok to take sole copyright on code that you mostly copied ...
Is this a case where the original had no copyright notice? If so, what do you suggest Vivek should have done?
The
head.Scode this was copied from definitely had a copyright.
Quoted 8 lines
I am sorry but I am completely unaware of the details of Copyright information. Somebody please tell me what should be the right info here given that basically I have taken the code from
arch/x86_64/boot/head.S, picked modifications done by Eric and minor changes of my own.Do I copy here all the copyright info of
head.Sand then add Eric's name and mine too?
Yes, that's "the safest" method to do it. (Or most politicaly correct or something.)
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Quoted 4 lines
- Fixed a bug during resume operation on machines which support NX bit.
Your comments/suggestions are welcome.
The patches mostly look good to me. Lots of valuable cleanups too.
But they are clearly .21 material, needing much more testing.
I don't want to merge them before I have the .20 queue flushed because merging them right now would cause too much patch churn I think and it's better to do that once the main flood of .20 patches is gone. So I would like to delay merging a bit until that happened.
Is that ok for you?
-Andi
Quoted 9 lines · Andi Kleen
Quoted 4 lines
- Fixed a bug during resume operation on machines which support NX bit.
Your comments/suggestions are welcome.
The patches mostly look good to me. Lots of valuable cleanups too.
But they are clearly .21 material, needing much more testing.
Quoted 7 lines
I don't want to merge them before I have the .20 queue flushed because merging them right now would cause too much patch churn I think and it's better to do that once the main flood of .20 patches is gone. So I would like to delay merging a bit until that happened.
Is that ok for you?
Hi Andi,
Yes that's fine with me. I will post a new series of patches once you have flushed out the queue for .20
Thanks
Vivek