Basic support for siemens sx1
Subsystems (6)
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
It would be nice to get basic patches merged to the -omap tree... do they look ok?
index 37641c1..9131d19 100644
arch/arm/mach-omap1/Kconfig +11 -0
@@ -107,6 +107,17 @@ config MACH_OMAP_PALMTT http://www.hackndev.com/palm/tt/ for more information. Say Y here if you have this PDA model, say N otherwise. +config MACH_SX1 + bool "Siemens SX1" + depends on ARCH_OMAP1 && ARCH_OMAP15XX + help + Support for the Siemens SX1 phone. To boot the kernel, + you'll need a SX1 compatible bootloader; check out + http://forum.oslik.ru and + http://www.handhelds.org/moin/moin.cgi/SiemensSX1 + for more information. + Say Y here if you have such a phone, say NO otherwise. + config MACH_NOKIA770 bool "Nokia 770" depends on ARCH_OMAP1 && ARCH_OMAP16XX
arch/arm/mach-omap1/Makefile +1 -0
@@ -29,6 +29,7 @@ obj-$(CONFIG_MACH_OMAP_PALMZ71) += boar obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o +obj-$(CONFIG_MACH_SX1) += board-sx1.o ifeq ($(CONFIG_ARCH_OMAP15XX),y) # Innovator-1510 FPGA
arch/arm/mach-omap1/board-sx1.c new file +494 -0
494 lines not on this page · raw message
drivers/mmc/omap.c +4 -1
@@ -37,6 +37,7 @@ #include <asm/arch/dma.h>#include <asm/arch/mux.h> #include <asm/arch/fpga.h> #include <asm/arch/tps65010.h> +#include <asm/arch/board-sx1.h> #define OMAP_MMC_REG_CMD 0x00#define OMAP_MMC_REG_ARGL 0x04
@@ -906,7 +907,9 @@ #endif*/ static void mmc_omap_power (struct mmc_omap_host *host,int on) { -if (on) { +if (machine_is_sx1 ()) +sx1_setmmcpower (on); +else if (on) {if (machine_is_omap_innovator ())innovator_fpga_socket_power (1 );else if (machine_is_omap_h2 ())
drivers/usb/gadget/omap_udc.c +2 -1
@@ -2077,6 +2077,7 @@ static inline int machine_needs_vbus_ses#ifndef CONFIG_MACH_OMAP_H4_OTG || machine_is_omap_h4() #endif + ||machine_is_sx1 () ); }
@@ -2823,7 +2824,7 @@ static int __init omap_udc_probe(struct hmc =HMC_1510 ; type ="(unknown)" ; -if (machine_is_omap_innovator ()) { +if (machine_is_omap_innovator () ||machine_is_sx1 ()) {/* just set up software VBUS detect, and then * later rig it so we always report VBUS. * FIXME without really sensing VBUS, we can't
include/asm-arm/arch-omap/board-sx1.h new file +46 -0
46 lines not on this page · raw message
include/asm-arm/arch-omap/hardware.h +4 -0
@@ -342,6 +342,10 @@ #ifdef CONFIG_MACH_OMAP_PALMTT#include "board-palmtt.h" #endif +#ifdef CONFIG_MACH_SX1 +#include "board-sx1.h" +#endif +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_ARCH_OMAP_HARDWARE_H */
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Tony Lindgren
reviewerHi,
Quoted 5 lines · Pavel Machek
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
Cool.
Quoted 2 lines
It would be nice to get basic patches merged to the -omap tree... do they look ok?
Yeah, looks good, except for the i2c part. Is Sofia really a TI PCF8574 i2c chip? In that case it could use the gpioexpander code.
Anyways, let's plan on pushing this to linux-omap tree, then do the changes for gpioexpander, and send that upstream too.
Regards,
Tony
Hi!
Quoted 8 lines · Pavel Machek
Quoted 5 lines
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
Cool.
:-)
Quoted 8 lines
Quoted 2 lines
It would be nice to get basic patches merged to the -omap tree... do they look ok?
Yeah, looks good, except for the i2c part. Is Sofia really a TI PCF8574 i2c chip? In that case it could use the gpioexpander code.
Anyways, let's plan on pushing this to linux-omap tree, then do the changes for gpioexpander, and send that upstream too.
Works for me. I'll check with google to find out what sofia really is.
Pavel
Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Tony Lindgren
reviewerQuoted 16 lines · Pavel Machek
Hi!
Quoted 8 lines · Pavel Machek
Quoted 5 lines
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
Cool.
:-)
Quoted 3 lines
Quoted 2 lines
It would be nice to get basic patches merged to the -omap tree... do they look ok?
Quoted 7 lines
Quoted 5 lines
Yeah, looks good, except for the i2c part. Is Sofia really a TI PCF8574 i2c chip? In that case it could use the gpioexpander code.
Anyways, let's plan on pushing this to linux-omap tree, then do the changes for gpioexpander, and send that upstream too.
Works for me. I'll check with google to find out what sofia really is.
OK, I've pushed to linux-omap after separating USB and MMC code into separate patches. Also did a bit more tabifying on the code.
BTW, PCF8574 .pdf is available on TI's site.
Regards,
Tony
2006/11/18, Tony Lindgren <[email protected]>:
Quoted 25 lines · Pavel Machek
Quoted 16 lines
Hi!
Quoted 8 lines · Pavel Machek
Quoted 5 lines
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
Cool.
:-)
Quoted 3 lines
Quoted 2 lines
It would be nice to get basic patches merged to the -omap tree... do they look ok?
Quoted 7 lines
Quoted 5 lines
Yeah, looks good, except for the i2c part. Is Sofia really a TI PCF8574 i2c chip? In that case it could use the gpioexpander code.
Anyways, let's plan on pushing this to linux-omap tree, then do the changes for gpioexpander, and send that upstream too.
Works for me. I'll check with google to find out what sofia really is.
Quoted 9 lines
OK, I've pushed to linux-omap after separating USB and MMC code into separate patches. Also did a bit more tabifying on the code.
BTW, PCF8574 .pdf is available on TI's site.
Regards,
Tony
Sofia is manufactured by Dialog and i didnt find any docs about it... And it is completely different from PCF8574, it is power controller IC.
Tony Lindgren
reviewerQuoted 31 lines · Vladimir
2006/11/18, Tony Lindgren <[email protected]>:
Quoted 30 lines · Pavel Machek
Quoted 16 lines
Hi!
Quoted 8 lines · Pavel Machek
Quoted 5 lines
From: Vladimir Ananiev <[email protected]>
This adds basic support for Siemens SX1. More patches are available, with video driver, mixer, and serial ports working. That is enough to do gsm calls with right userland.
Cool.
:-)
Quoted 3 lines
Quoted 2 lines
It would be nice to get basic patches merged to the -omap tree... do they look ok?
Quoted 7 lines
Quoted 5 lines
Yeah, looks good, except for the i2c part. Is Sofia really a TI PCF8574 i2c chip? In that case it could use the gpioexpander code.
Anyways, let's plan on pushing this to linux-omap tree, then do the changes for gpioexpander, and send that upstream too.
Works for me. I'll check with google to find out what sofia really is.
OK, I've pushed to linux-omap after separating USB and MMC code into separate patches. Also did a bit more tabifying on the code.
BTW, PCF8574 .pdf is available on TI's site.
Quoted 7 lines
Quoted 4 lines
Regards,
Tony
Sofia is manufactured by Dialog and i didnt find any docs about it... And it is completely different from PCF8574, it is power controller IC.
OK, thanks for clarifying that.
Tony