Bug: Pentium M not always detected by CPUFREQ
Hi !
One module thinks that I have a Pentium M, the other doesn't. Which module is right?
# modprobe p4-clockmod p4-clockmod: Warning: Pentium M detected. The speedstep_centrino module offers voltage scaling in addition of frequency scaling. You should use that instead of p4-clockmod, if possible. p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Okay, so I'll try that:
# rmmod p4-clockmod # modprobe speedstep-centrino FATAL: Error inserting speedstep_centrino (/lib/modules/2.6.19-rc6/kernel/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.ko): No such device
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Celeron(R) processor 600MHz stepping : 5 cpu MHz : 598.093 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe bogomips : 1196.88
So far I can only say that speedstep-centrino doesn't have an entry for a CPU with a mere 600 MHz. May this be the problem?
Quoted 29 lines · Holger Schurig
Hi !
One module thinks that I have a Pentium M, the other doesn't. Which module is right?
model name : Intel(R) Celeron(R) processor 600MHz
stepping : 5
cpu MHz : 598.093
cache size : 64 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr
pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe
bogomips : 1196.88So far I can only say that speedstep-centrino doesn't have an entry for a CPU with a mere 600 MHz. May this be the problem? -
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Signature · 2 lines
if you want to mail me at work (you don't), use arjan (at) linux.intel.com Test the interaction between Linux and your BIOS via http://www.linuxfirmwarekit.org
Quoted 10 lines · Holger Schurig
Hi !
One module thinks that I have a Pentium M, the other doesn't. Which module is right?
# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 9 model name : Intel(R) Celeron(R) processor 600MHz
you don't have a pentium M
Quoted 16 lines
stepping : 5
cpu MHz : 598.093
cache size : 64 KBfdiv_bug: nohlt_bug: nof00f_bug: nocoma_bug: no
fpu : yesfpu_exception: yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr mce cx8 apic sep mtrr
pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 tm pbe
bogomips : 1196.88
Quoted 3 lines
So far I can only say that speedstep-centrino doesn't have an entry for a CPU with a mere 600 MHz. May this be the problem ?
as far as I know Celeron processors don't have actual frequency control capabilities (and no p4-clockmod doesn't count, that doesn't save you any energy realistically)....
Signature · 2 lines
if you want to mail me at work (you don't), use arjan (at) linux.intel.com Test the interaction between Linux and your BIOS via http://www.linuxfirmwarekit.org
Quoted 1 line
you don't have a pentium M
In that case p4-clockmod has a bug, because it said that I have one.
Quoted 4 lines · Holger Schurig
Quoted 1 line
you don't have a pentium M
In that case p4-clockmod has a bug, because it said that I have one.
That bug should be fixed in -mm, cpufreq-git and 2.6.20.
Thanks,
Dominik