Skip to contentSkip to conversation

Implementation of acpi_video_get_next_level

PATCH In review Thomas Tuttle 1 participant 3 messages Nov 24, 2006 – Nov 27, 2006 ACPI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Implementation of acpi_video_get_next_level

PATCH: Implementation of acpi_video_get_level

(patch file attached)

acpi_video_get_next_level was supposed to implement an algorithm to select a new brightness level based on the old brightness level of an ACPI video device, but it simply says "/* Fix me */" and returns the current brightness.

This patch implements acpi_video_get_next_level properly. It had to change a few constants at the top of the file because they were (apparently) wrong, but it appears to work on my Dell Inspiron e1405 (with BIOS A05 only--BIOS A04 doesn't seem to send ACPI video hotkey events).

I'm sending this to Len Brown, the linux-kernel and linux-acpi lists at kernel.org, the acpi-devel list at Sourceforge, and the linux-acpi alias at Intel. I'm not sure who should be the one to apply it, but it's a small and simple enough patch that it shouldn't require a complicated review.

Thanks for your time, and hope this helps,

Thomas Tuttle

drivers/acpi/video.c +30 -7
index 56666a9..2fc78ca 100644
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2004 Luming Yu <[email protected]>
  *  Copyright (C) 2004 Bruno Ducrot <[email protected]>
+ *  Copyright (C) 2006 Thomas Tuttle <[email protected]>
  *
  * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  *
@@ -47,11 +48,11 @@ #define ACPI_VIDEO_NOTIFY_CYCLE		0x82
 #define ACPI_VIDEO_NOTIFY_NEXT_OUTPUT	0x83
 #define ACPI_VIDEO_NOTIFY_PREV_OUTPUT	0x84
 
-#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x82
-#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x83
-#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x84
-#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x85
-#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x86
+#define ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS	0x85
+#define	ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS	0x86
+#define ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS	0x87
+#define ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS	0x88
+#define ACPI_VIDEO_NOTIFY_DISPLAY_OFF		0x89
 
 #define ACPI_VIDEO_HEAD_INVALID		(~0u - 1)
 #define ACPI_VIDEO_HEAD_END		(~0u)
@@ -1509,8 +1510,30 @@ static int
 acpi_video_get_next_level(struct acpi_video_device *device,
 			  u32 level_current, u32 event)
 {
-	/*Fix me */
-	return level_current;
+	int min, max, min_above, max_below, i, l;
+	max = max_below = 0;
+	min = min_above = 255;
+	for (i = 0; i < device->brightness->count; i++) {
+		l = device->brightness->levels[i];
+		if (l < min) min = l;
+		if (l > max) max = l;
+		if (l < min_above && l > level_current) min_above = l;
+		if (l > max_below && l < level_current) max_below = l;
+	}
+
+	switch (event) {
+	case ACPI_VIDEO_NOTIFY_CYCLE_BRIGHTNESS:
+		return (level_current < max) ? min_above : min;
+	case ACPI_VIDEO_NOTIFY_INC_BRIGHTNESS:
+		return (level_current < max) ? min_above : max;
+	case ACPI_VIDEO_NOTIFY_DEC_BRIGHTNESS:
+		return (level_current > min) ? max_below : min;
+	case ACPI_VIDEO_NOTIFY_ZERO_BRIGHTNESS:
+	case ACPI_VIDEO_NOTIFY_DISPLAY_OFF:
+		return 0;
+	default:
+		return level_current;
+	}
 }
 
 static void
#2 lore raw

ACPI patch submission (was: [PATCH] Implementation of acpi_video_get_next_level)

I've got a patch that fixes acpi_video_get_next_level in the ACPI video driver. I sent it to linux-kernel, linux-acpi, and some people at Intel. It's a very short and simple patch that fixes the brightness hotkeys on my laptop, and probably others. (The function it fixes had /* Fix me */ written in it.)

Where or how should I send this patch so that it can be included in the mainline kernel?

Thanks,

Thomas Tuttle