ide_scsi: allow it to be used for non CD only
PATCH 1/1 ide_scsi: allow it to be used for non CD only
Some people want to use ide_cd for CD-ROM but still dynamically load ide-scsi for things like tape drives. If you compile in the CD driver this works out but if you want them modular you need an option to ensure that whoever loads first the right things happen.
This replaces the original draft patch which leaked a scsi host reference
drivers/scsi/ide-scsi.c +5 -0
@@ -110,6 +110,7 @@ } idescsi_scsi_t;static DEFINE_MUTEX (idescsi_ref_mutex); +static int idescsi_nocd;/* Set by module param to skip cd */ #define ide_scsi_g (disk) \ container_of((disk)->private_data, struct ide_scsi_obj, driver)
@@ -1127,11 +1128,14 @@ warned =1 ; } +if (idescsi_nocd && drive->media == ide_cdrom) +return -ENODEV ; +if (!strstr ("ide-scsi" , drive->driver_req) || !drive->present || drive->media == ide_disk || !(host =scsi_host_alloc (&idescsi_template,sizeof (idescsi_scsi_t))))return -ENODEV ; g =alloc_disk (1 <<PARTN_BITS );if (!g)
@@ -1187,6 +1192,7 @@driver_unregister (&idescsi_driver.gen_driver); } +module_param (idescsi_nocd, int,0600 );module_init (init_idescsi_module);module_exit (exit_idescsi_module);MODULE_LICENSE ("GPL" );
Hi,
Nowadays, you can dynamically change driver bound to a device using sysfs and it works just fine for IDE, ie:
echo -n "1.0" > /sys/bus/ide/drivers/ide-scsi/unbind echo -n "1.0" > /sys/bus/ide/drivers/ide-cdrom/bind
to unbind /dev/hdc from ide-scsi and bind to ide-cdrom
That was one of the main goals behind my old patches to convert IDE device drivers to device-model.
Please don't add another module parameter for controlling driver binding and making it more complicated than already is:
* "hdx=scsi" kernel parameter
* "hdx=driver" kernel parameter
* /proc/ide/hd?/driver interface
* ide_cd and "ignore" parameter
(actually all the above can go away).
Bart
Quoted 43 lines · Alan
Some people want to use
ide_cdfor CD-ROM but still dynamically load ide-scsi for things like tape drives. If you compile in the CD driver this works out but if you want them modular you need an option to ensure that whoever loads first the right things happen.This replaces the original draft patch which leaked a scsi host reference
Signed-off-by Alan Cox <[email protected]>diff -u --exclude-from
/usr/src/exclude--new-file --recursivelinux.vanilla-2.6.19-rc6-mm1/drivers/scsi/ide-scsi.clinux-2.6.19-rc6-mm1/drivers/scsi/ide-scsi.cdrivers/scsi/ide-scsi.c 2006-11-29 14:18:12.000000000 +0000 renamed from drivers/scsi/ide-scsi.c 2006-11-24 13:58:08.000000000 +0000 +5
-0@@ -110,6 +110,7 @@ } idescsi_scsi_t; static DEFINE_MUTEX(idescsi_ref_mutex); +static int idescsi_nocd; /* Set by module param to skip cd */ #define ide_scsi_g(disk) \ container_of((disk)->private_data, struct ide_scsi_obj, driver)@@ -1127,11 +1128,14 @@ warned = 1; } + if (idescsi_nocd && drive->media == ide_cdrom) + return -ENODEV; + if (!strstr("ide-scsi", drive->driver_req) || !drive->present || drive->media == ide_disk || !(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t)))) return -ENODEV; g = alloc_disk(1 << PARTN_BITS); if (!g)@@ -1187,6 +1192,7 @@ driver_unregister(&idescsi_driver.gen_driver); } +module_param(idescsi_nocd, int, 0600); module_init(init_idescsi_module); module_exit(exit_idescsi_module); MODULE_LICENSE("GPL");
Quoted 4 lines · On Wed, 29 Nov 2006 23:05:56 +0100 "Bartlomiej Zolnierkiewicz"…
Hi,
Nowadays, you can dynamically change driver bound to a device using sysfs and it works just fine for IDE, ie:
This isn't the point of this change. The point is to do this at discovery time. If you do it later then many horrible things happen as the device names and renames itself while udev goes boom.
Its a small clean patch and it'll solve the problem nicely until drivers/ide dies.
Quoted 10 lines · Alan
Quoted 4 lines · On Wed, 29 Nov 2006 23:05:56 +0100 "Bartlomiej Zolnierkiewicz"…
Hi,
Nowadays, you can dynamically change driver bound to a device using sysfs and it works just fine for IDE, ie:
This isn't the point of this change. The point is to do this at discovery time. If you do it later then many horrible things happen as the device
then "hdc=ide-cdrom" at a boot time should keep ide-scsi from binding to hdc for all cases (builtin/modular ide-cd/ide-scsi)
Quoted 1 line
names and renames itself while udev goes boom.
Uh? I hope that udev people are informed
about these horrible things...
/dev/hdc stays there all the time/dev/sr? addition/removal should be handled
by udev otherwise it looks like a udev bug
Quoted 2 lines
Its a small clean patch and it'll solve the problem nicely until
drivers/idedies.
No strong feelings here about the patch. It is indeed a clean hack. ;) I just wanted to point out that there are already more flexible ways to achieve the same thing.
Bart