A few small additions and corrections to README
PATCH 1/1 A few small additions and corrections to README
Hi,
here's a small patch which
- adds a few archs to the current list of supported platforms.
- adds a few missing slashes at the end of URLs.
- adds a few references to additional documentation.
- adds "make config" to the list of possible configuration targets.
- makes a few other minor changes.
Please consider for inclusion.
---
README | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-)
Documentation/DocBook/Makefile +0 -0
README +11 -6
@@ -1,4 +1,4 @@ - Linux kernel release 2.6.xx <http://kernel.org> + Linux kernel release 2.6.xx <http://kernel.org/> These are the release notes for Linux version 2.6. Read them carefully, as they tell you what this is all about, explain how to install the
@@ -22,15 +22,17 @@ ON WHAT HARDWARE DOES IT RUN? Although originally developed first for 32-bit x86-based PCs (386 or higher), today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and - UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, + UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - and Renesas M32R architectures. + Cris, Xtensa and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has also been ported to a number of architectures without a PMMU, although functionality is then obviously somewhat limited. + Linux has also been ported to itself. You can now run the kernel as a + userspace application - this is called UserMode Linux (UML). DOCUMENTATION:
@@ -113,6 +115,7 @@ INSTALLING the kernel: version 2.6.12.2 and want to jump to 2.6.12.3, you must first reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying the 2.6.12.3 patch. + You can read more on this in Documentation/applying-patches.txt - Make sure you have no stale .o files and dependencies lying around:
@@ -161,6 +164,7 @@ CONFIGURING the kernel: only ask you for the answers to new questions. - Alternate configuration commands are: + "make config" Plain text interface. "make menuconfig" Text based color menus, radiolists & dialogs. "make xconfig" X windows (Qt) based configuration tool. "make gconfig" X windows (Gtk) based configuration tool.
@@ -303,8 +307,9 @@ IF SOMETHING GOES WRONG: - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump as is, otherwise you will have to use the "ksymoops" program to make - sense of the dump. This utility can be downloaded from - ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops. + sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). + This utility can be downloaded from + ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ . Alternately you can do the dump lookup by hand: - In debugging dumps like the above, it helps enormously if you can
@@ -336,7 +341,7 @@ IF SOMETHING GOES WRONG: If you for some reason cannot do the above (you have a pre-compiled kernel image or similar), telling me as much about your setup as - possible will help. + possible will help. Please read the REPORTING-BUGS document for details. - Alternately, you can use gdb on a running kernel. (read-only; i.e. you cannot change values or set break points.) To do this, first compile the
Quoted 31 lines · Jesper Juhl
Hi,
here's a small patch which
- adds a few archs to the current list of supported platforms.
- adds a few missing slashes at the end of URLs.
- adds a few references to additional documentation.
- adds "make config" to the list of possible configuration targets.
- makes a few other minor changes.Please consider for inclusion.
Signed-off-by Jesper Juhl <[email protected]>---
README | 17 +++++++++++------ 1 files changed, 11 insertions(+), 6 deletions(-)Documentation/DocBook/Makefile +0
-0README +1
-1@@ -1,4 +1,4 @@ - Linux kernel release 2.6.xx <http://kernel.org> + Linux kernel release 2.6.xx <http://kernel.org/> These are the release notes for Linux version 2.6. Read them carefully, as they tell you what this is all about, explain how to install the
README ON WHAT HARDWARE DOES IT RUN? · line 26
Quoted 6 lines
README +1
-1@@ -22,15 +22,17 @@ ON WHAT HARDWARE DOES IT RUN? Although originally developed first for 32-bit x86-based PCs (386 or higher), today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and - UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, + UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
And AVR32 as of 2.6.19 :)
Quoted 61 lines
README +9
-5IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - and Renesas M32R architectures. + Cris, Xtensa and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has also been ported to a number of architectures without a PMMU, although functionality is then obviously somewhat limited. + Linux has also been ported to itself. You can now run the kernel as a + userspace application - this is called UserMode Linux (UML). DOCUMENTATION:@@ -113,6 +115,7 @@ INSTALLING the kernel: version 2.6.12.2 and want to jump to 2.6.12.3, you must first reverse the 2.6.12.2 patch (that is, patch -R) _before_ applying the 2.6.12.3 patch. + You can read more on this in Documentation/applying-patches.txt - Make sure you have no stale .o files and dependencies lying around:@@ -161,6 +164,7 @@ CONFIGURING the kernel: only ask you for the answers to new questions. - Alternate configuration commands are: + "make config" Plain text interface. "make menuconfig" Text based color menus, radiolists & dialogs. "make xconfig" X windows (Qt) based configuration tool. "make gconfig" X windows (Gtk) based configuration tool.@@ -303,8 +307,9 @@ IF SOMETHING GOES WRONG: - If you compiled the kernel with CONFIG_KALLSYMS you can send the dump as is, otherwise you will have to use the "ksymoops" program to make - sense of the dump. This utility can be downloaded from - ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops. + sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred). + This utility can be downloaded from + ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ . Alternately you can do the dump lookup by hand: - In debugging dumps like the above, it helps enormously if you can@@ -336,7 +341,7 @@ IF SOMETHING GOES WRONG: If you for some reason cannot do the above (you have a pre-compiled kernel image or similar), telling me as much about your setup as - possible will help. + possible will help. Please read the REPORTING-BUGS document for details. - Alternately, you can use gdb on a running kernel. (read-only; i.e. you cannot change values or set break points.) To do this, first compile the -To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Quoted 1 line · Ben Nizette
Jesper Juhl wrote:
[...]
Quoted 8 lines
Review ON WHAT HARDWARE DOES IT RUN? · line 26
Quoted 7 lines
(quoted diff) +1
-1@@ -22,15 +22,17 @@ ON WHAT HARDWARE DOES IT RUN? Although originally developed first for 32-bit x86-based PCs (386 or higher), today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and - UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, + UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,And AVR32 as of 2.6.19 :)
Well, the list does say "(at least)" ;-) But sure, find an add-on patch below.
Quoted 3 lines
Review ON WHAT HARDWARE DOES IT RUN? · line 28
Quoted 3 lines
(quoted diff) +1
-1IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - and Renesas M32R architectures. + Cris, Xtensa and Renesas M32R architectures.
---
README +1 -1
@@ -24,7 +24,7 @@ ON WHAT HARDWARE DOES IT RUN? today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell, IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS, - Cris, Xtensa and Renesas M32R architectures. + Cris, Xtensa, AVR32 and Renesas M32R architectures. Linux is easily portable to most general-purpose 32- or 64-bit architectures as long as they have a paged memory management unit (PMMU) and a port of the
Signature · 3 lines
Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html